Like was done for the 'python' package, also make the ossaudiodev
module optional for 'python3'. ossaudiodev is always disabled for
host-python3, and a new option is added to enable it for the target
python3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have a configure option in Python to enable/disable the
ossaudiodev module, this commit adds a configuration option to the
target Python to explicitly enable/disable this module.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module is not needed to build the target Python, and can cause
some build issues on certain systems (when <linux/soundcard.h> does
not contain the OSS related definitions).
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module causes some build failures in certain setups and is not
very useful.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rename the VNSTAT_INSTALL_VNSTATI to VNSTAT_INSTALL_VNSTATI_CMDS,
and use 'define ... endef'.
- Use full paths for the destinations when using $(INSTALL)]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with RaspberryPi B+ and PiTFT Mini Kit - 320x240 2.8" TFT
(see [1] and [2]) and the following target configuration changes:
- cmdline.txt: add 'fbcon=map:10 fbcon=font:VGA8x8'
- add /etc/modules-load.d/fbtft.conf with 'fbtft_device'
- add /etc/modprobe.d/00-fbtft.conf with 'options fbtft_device name=adafruit28 rotate=90 gpios=dc:25'
[1] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9893.jpg
[2] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9897.jpg
[Thomas:
- Rename prompt of the Linux extension to "FB TFT drivers"
- Remove the full name of the kernel config options in the help
text. Giving their CONFIG_<foo> name is enough.
- Remove the mention of CONFIG_SPI_BCM2708, since this makes the
description RaspberryPi specific, while these drivers can work
with any SPI controller.
- Refactor the code in linux-ext-fbtft.mk to avoid duplication
between the < 3.15 and >= 3.15 cases.
- Make the fbtft package a promptless package, since there is no
point in selecting only this package, without the kernel
extension.
- Change the license to GPLv2, since it's kernel code.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove empty new line at end of .mk file.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
* Add hash file
* Tweak the initscript to use a pidfile to avoid nasty warnings
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As source url use the git repository instead of the unavaiable svn
repository.
Also because the git repository does not include the netsurf core
buildsystem source that are needed to build this package add as
dependency the netsurf-buildsystem package and use those files through a
symbolink link.
This fix the following error:
svn: E670002: Unable to connect to a repository at URL 'svn://svn.netsurf-browser.org/trunk/libsvgtiny'
svn: E670002: Unknown hostname 'svn.netsurf-browser.org'
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the NetSurf project shared build system, used by various NetSurf
sub-projects like the libsvgtiny project.
[Thomas: use cp -dpfr instead of just cp -r, to match what we do in
other Buildroot packages.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to install all the DTBs:
- standard DTBs for standalon A/B and A+/B+ models;
- overlay DTBs for the 'hats' addon boards.
Install the DTBs as per the traditional layout expected by all RPi
users, that is:
- base DTBs alongside the other boot files;
- overlay DTBs in a sub-directory.
This requires the user provide a specially configured Linux defconfig
file, as the default ones do not enable USE_OF.
[Thomas: adjust comment explaining why we use a different version when
installing the DTBs is selected.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Raspberry Pi can boot a kernel with device tree support. But at the
same time, the RPi folks wante to keep the old-fashioned, ATAG-based way
of booting (don't ask...).
So, the bootloader needs to know whether the kernel it is loading has DT
support or not. For that, it looks at the end of the kernel image for a
magic footer. If found, it loads a device tree and sets the registers
appropriately so that the kernel finds the DTB. If not found, it loads
the kernel with the traditional ATAGS.
Where it becomes a bit tricky, is that the DTB is different for models
A/B and A+/B+ (that is A and B use the same DTB, while the A+ and B+ use
a second DTB). The bootloader is capable to load the correct DTB from a
specially named file. That is:
- on A/B, it loads bcm2708-rpi-b.dtb
- on A+/B+, it loads bcm2708-rpi-b-plus.dtb
If the DTB is differently named, the bootloader won't find it, will not
load any DTB at all, and revert to booting with ATAGS.
It is possible to specify what DTB to load, by adding an new config
option 'device_tree=file.dtb' in config.txt, but then the firmware on
the SDcard is no longer bootable on both the original models and the
Plus models.
So, add a script that appends the appropriate footer to the kernel
image. The script is vampirised from the RPi's tools repository, but a
new package is *not* added just for that script: the whole repository is
300+ MiB, and a checkout is 600+ MiB; it is not pertinent to add this as
a new package for a script that weights a few KiB...
Install that script as a host utility, too.
Notes: lots of information is available in this thread on the RPi forums:
http://www.raspberrypi.org/forums/viewtopic.php?f=29&t=93015
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add 'cp -dpfr' instead of a convuluted use of 'tar c' + 'tar
x' do not a copy.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit slightly cleans up the newt patches: use Git formatted
patches, improve title and description. This was done in preparation
for the upstream submission of those patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typo in commit title.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 799c12e (xz-utils: needs threads) tried to fix an autobuild
failure by requiring threads. But xz-utils can be configured without
thread support (even though it is one of the most prominent
selling-points of the latest release!).
[Thomas: use --{enable,disable}-threads instead of
--enable-threads={yes,no}, to match what we generally do in most
autotools packages.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-9402 - denial of service in getnetbyname function.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Indicate in the Config.in help text that this policy compiler is
SELinux related.
- Rewrap Config.in help text and remove trailing white space.
- Add a comment in the .mk file to indicate why we're passing
DESTDIR= at build time.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Irqbalance is a daemon to help balance the cpu load generated by
interrupts across all of a systems cpus.
[Thomas:
- Add upstream URL in Config.in help text.
- Fix indentation of init script.]
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For portability. All other Buildroot scripts (i.e. scripts that run on
host) already use the "/usr/bin/env bash" shebang.
This change is needed for NixOS, which lacks a global /bin/bash.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libiio library will compile fine with a toolchain that doesn't
support threads (tested with br-arm-full-nothread.config).
Only the IIOD program requires support for threading.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-0559, CVE-2015-0560 - The WCCP dissector could crash.
CVE-2015-0561 - The LPP dissector could crash.
CVE-2015-0562 - The DEC DNA Routing Protocol dissector could crash.
CVE-2015-0563 - The SMTP dissector could crash.
CVE-2015-0564 - Wireshark could crash while decypting TLS/SSL sessions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-8150 - When libcurl sends a request to a server via a HTTP
proxy, it copies the entire URL into the request and sends if off.
If the given URL contains line feeds and carriage returns those will be
sent along to the proxy too, which allows the program to for example
send a separate HTTP request injected embedded in the URL.
CVE-2014-8151 - libcurl stores TLS Session IDs in its associated Session
ID cache when it connects to TLS servers. In subsequent connects it
re-uses the entry in the cache to resume the TLS connection faster than
when doing a full TLS handshake. The actual implementation for the
Session ID caching varies depending on the underlying TLS backend.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our curl package is really named libcurl.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Bump version to 1.15
-Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to Baruch Siach for the suggestion.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch to install headers and static library separately.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also remove tests since they require static libraries.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Change the dependency logic in the Config.in file. We don't want to
have a 'depends on BR2_PACKAGE_QT5GRAPHICALEFFECTS': it should be
selected automatically. Instead, let's have a dependency on Qt5 and
OpenGL, and select everything else automatically. A comment is
added, shown only when Qt5 is available, on the right platforms
(which have JSCore support), to explain that we need an OpenGL
backend.
- Change the prompt of the package to be qt5cinex, to match the
package name.
- Replace "High-definition support" by "High-definition version".
- Fix a typo in the Config.in help text: definifition -> definition.
- Add a comment in the .mk file explaining why we install a wrapper
shell script (explanation taken from Pierre's e-mail).
- Fix indentation in the install target commands.
- Keep only sha256 hashes, those are sufficient. Replace the comment
in the hash file by the more traditional "Locally computed".]
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-6272 - integer overflow bugs in evbuffer_add() and
related functions.
Also file hash file (was stale) and switch to sourceforge for a
stable/proper hash.
Patch 0002-Avoid-using-top_srcdir-in-TESTS.patch is upstream so remove.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a number of scripts use xxd, so install it as well.
Install it unconditionally as the size is trivial compared to vim (~10kb vs
~1.5MB).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On machines where xzcat/unxz is not available, we build host-xz. So if
host-xz is itself downloaded as a xz-compressed archive, it doesn't
work. Revert back to a .bz2 archive.
Fixes:
http://autobuild.buildroot.org/results/79e/79ecba46f353546ba60ae86dd3898b4d86c056a0/
(and many similar failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 1.3.6
- Update the hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need to have "AUTORECONF = YES" since the patch which
modified the "configure.in" file was removed in the last version bump.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 0.161
- Remove the portability patch. We don't need to have it in Buildroot
since it includes the version number so we can download it safely
without having collisions between versions.
- Adapt the patches that need to be adapted.
- Rename patches to start from 0001.
- Update the hash value and add a new value for the portability patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Bump version to 4.6.1
-Add a hash file
-Use xz tarball to save space and bandwidth
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Bump version to 5.2.0
-Update hash file
-Use xz tarball instead of bz2 to save space and bandwidth
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-9221 - denial-of-service vulnerability triggered by an
IKEv2 Key Exchange payload that contains the Diffie-Hellman group 1025.
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make gzip install binaries to / rather than /usr to fix bug #7766, it's
the FHS mandated target.
This also avoids duplicating binaries with busybox when both are
installed.
Also make gzip install after busybox if both are enabled to make the
proper gzip package override any busybox version since it's usually more
lightweight in functionality and slower.
And add a hash file while at it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding a patch to move AC_CONFIG_AUX_DIR up a few lines so the autotools
can find it.
This patch is based on the same solution adopted by Debian:
https://lists.debian.org/debian-release/2014/11/msg01231.html
This will prevent a build failure like this one caused by a version bump
of the automake package:
configure: error: cannot find install-sh, install.sh, or shtool in "."
"./.." "./../.."
Related:
http://lists.busybox.net/pipermail/buildroot/2015-January/116604.html
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-8148 - If a system service installs unsafe security
policy rules that allow arbitrary method calls then this prevents memory
consumption and possible privilege escalation via
UpdateActivationEnvironment.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2013-7296 - JBIG2Stream::readSegments()" Denial of Service
Vulnerability.
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes many of the reported security audit vulnerabilities:
http://www.openwall.com/lists/oss-security/2014/12/24/1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.org/results/3f0/3f07574e6e4edda9e31fcb0de520a4dbabe6b94a/
[Thomas:
- Improved configure.ac logic, as suggested by Yann E. Morin.
- Added a comment in the .mk file to indicate why we're using
AUTORECONF = YES. Suggested by Yann as well.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license is really a 3 clauses BSD license, so let's specify this
in python-django.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Bump to Django 1.7.2, the latest available version;
- Support Python 3 in addition to Python 2.
- Use a download location from pypi.python.org since the download
location from djangoproject.com didn't work as is and is
impractical to use with Buildroot: the full URL of the tarball is
https://www.djangoproject.com/download/1.7.2/tarball/. I.e, it does
not end with the tarball file name.]
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Should hopefully fix:
http://autobuild.buildroot.net/results/2cc40ae3fc8b7a287c43528b3e4ffdbcd5033c09/
[Thomas:
- Rename patch to the new naming convention.
- Add SoB line from Alex inside the patch itself.
- Adjust the commit log to contain the reference to the autobuilder
failure.]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment was missing the dependency on BR2_USE_MMU, and was using
'depends on !BR2_TOOLCHAIN_HAS_THREADS && BR2_STATIC_LIBS' while it
should in fact be '!BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS',
since we want show the comment *either* when we don't have threads
*or* when we are building a purely static lib system.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some platforms, hardware-assisted compare-and-swap may not be
available, so libatomic_ops will not provide it.
However, libatomic_ops can provide a purely software CAS emulation, but
must be instructed to do so. erlang just forgot to tell libatomic_ops
that it does require CAS.
Fix that by defining AO_REQUIRE_CAS before including atmoic_ops.h, like
is done in libunwind, as pointed out by Thomas.
Also, erlang has a convoluted, mind-alterating set on aclocal.m4 macros,
that just forgets to link against -latomic_ops when checking CAS is
available, so that even if CAS is available, configure chokes.
Since I would like to keep the little sanity I still have, just force
linking with -latomic_ops. This is useless when the check is natrally
sucessful (i.e. on platforms where CAS is available in HW), but we
would eventually link with -latomic_ops there, too; it's just redundant.
Overall, just consider that erlang requires libatomic_ops, so forcibly
depend on it, it is easier than trying to disable it. We can revisit
that whenever someone wants to run erlang on a platform for which there
is no libatomic_ops support.
Fixes a slew of autobuild ARM failures:
http://autobuild.buildroot.org/results/e7b/e7bfc4893dea6b133f0794ef44d50ad89bcb6662/http://autobuild.buildroot.org/results/3e9/3e9c307f1ec6536482641019dcaa94677f7267a3/http://autobuild.buildroot.org/results/a85/a85ca414e5b67af46510abd7b610eb5ae8661de4/
[...]
[Thomas: fix minor typos in commit log, add dependency on
BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS to the Erlang comment about thread
and shared library dependency.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Do not hard-code QUIET in our download commands, since it is handled in
the backends.
Suggested by Fabio.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If doing a silent build (make -s -> QUIET=-q), silence all downloads,
by passing the -q flag downward to backends as well as to check-hash.
Change a printf to use the trace functions.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to bumping the version:
- drop license comment from help, we have PKG_LICENSE* for that.
- add optional dependency on libsecret
- remove --without-gnome-keyring option
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes build issues like, observed on a stripped-down build system:
compress.cpp:32:18: fatal error: zlib.h: No such file or directory
#include <zlib.h>
^
compilation terminated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change to usenix.org.uk mirror since nluug.nl doesn't seem to mirror
files as quickly and is down at the moment.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aice sources use fork function, which is only available on architecture
with MMU.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some adapters are automatically enabled, but may not be built because of
missing (archecture) dependencies. So, just set the options symetrically.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though technically libselinux could make its <dlfcn.h> include
optional, the build system isn't really suited to build and install
only the static variant of libselinux, so let's make libselinux and
its reverse dependency not available in pure-static environments.
Fixes:
http://autobuild.buildroot.org/results/90d/90dc73980a45b9b0441be3d493b22e3afea3cd6e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that we don't use completely sequential numbers, because patches
below 100 are used to address cross-compilation issues in Python,
while patches above 100 are used to make more Python modules
configurable.
[Thomas: fixup commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In addition to doing the bump, this commit also:
- Refreshes all the patches
- Removes python-003-properly-detect-if-python-build.patch, which has
been applied upstream.
- Passes the --without-ensurepip option, like is done in Python 3, to
avoid having Python use PIP to automatically download stuff when it
is being built.
- PYTHON_LIBTOOL_PATH = NO is added to prevent Buildroot from trying
to patch a version of libtool for which we don't have matching
patches, which isn't a problem since we're anyway not using the
part of the Python sources that uses libtool (it's the built-in
copy of libffi, and we use the external libffi).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Note that we don't use completely sequential numbers, because patches
below 100 are used to address cross-compilation issues in Python 3,
while patches above 100 are used to make more Python 3 modules
configurable.
[Thomas: fixup commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit bumps python3 to Python 3.4.2. Two patches had to be
changed slightly to fix some minor conflicts.
PYTHON3_LIBTOOL_PATH = NO was added to prevent Buildroot from trying
to patch a version of libtool for which we don't have matching
patches, which isn't a problem since we're anyway not using the part
of the Python sources that uses libtool (it's the built-in copy of
libffi, and we use the external libffi).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The (u)dhcpc hook installed by the busybox package configures the
network and exits. If we want to do anything further with a DHCP lease,
we'd have to replace the script entirely.
This change introduces a .d directory for hooks (based on the script
filename), which are executed after the interface configuration. This
allows packages to drop a script file in the .d directory to perform
actions on DHCP events.
We'll use this in a later change to notify petitboot of DHCP boot
information.
[Thomas: update to latest Buildroot, fix indentation.]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GNU lightning is a library that generates assembly language code at
run-time.
https://www.gnu.org/software/lightning/
[Thomas:
- Wrap list of architectures in Config.in
- Introduce an explicit Config.in option for the disassembler
support, since it needs both binutils and zlib, which may not be
easy to guess.
- Add hash file.
- Bump to version 2.0.5.
- Add patch to fix cross-compilation issues on ARM and x86 due to
AC_RUN_IFELSE() tests.
- Adjust license information: the library is actually under LGPLv3+,
not GPLv3. There is a COPYING file with the text of the GPLv3 in
the code base, but this license doesn't seem to be used in anything
that is actually installed.
- Add AUTORECONF = YES since we're now patching configure.ac.
- Add missing dependency on zlib for the disassembler support.
- Add a special LIBS=-lintl when enabling the disassembler support
because binutils libraries use gettext functions, but they are not
linked against libintl.]
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This library will be used later in the "lightning" package.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Changed hash file to use SHA256
- Remove libiconv handling, since the iconv detection in mpc is
broken: if it's not available in the C library, it expects to find
iconv() in libintl (from gettext). But it's actually libiconv that
provides iconv() for non-locale capable uClibc toolchains. But
since anyway the package builds fine without iconv() support and
properly detects when it's available, don't bother with this.]
Signed-off-by: Thierry Bultel <tbultel@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevent can optionally use OpenSSL, so add an optional dependency on
this package to explicit this possibility. This makes sure libevent
always gets built with OpenSSL support when the OpenSSL package is
enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This patch adds the management of (almost) all the config options of
openocd 0.8.0. A BR config variable is added for (almost) every
adapter known to openocd and all the dependencies are automatically
calculated from the chosen adapters, so only the necessary libraries
are built.
Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is
not actually included in buildroot, so it has been removed. Also
zy1000 adapters are actually broken in openocd and have been removed.
The host version of the package enables all the possible adapters and
the related libraries.
[Thomas:
- Slightly fixup the commit log.
- Rename the patches to the new patch naming convention.
- Update hash file using a contribution from Vincent Stehlé.
- Move the thread dependency from the OpenOCD option down to each
sub-option that actually needs it (when it needs libusb,
libusb-compat or libftdi). We keep only one comment, as we would
otherwise have to add too many repeatitive comments.
- Remove commented options.
- Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting
BR2_PACKAGE_LIBFTDI.
- Remove trailing white spaces.
- Pass -std=gnu99, needed to build with a basic toolchain.
- Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in
a more compact way.
- Adjust indentation for HOST_OPENOCD_CONF_OPTS.
- Reword the comment above HOST_OPENOCD_CONF_OPTS.]
Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rename patches to new convention and add hash file as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bcopy patch removed since code is upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0003-Improve-check-of-the-sysctl-function.patch is now upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libxmlrpc is able to build shared libraries only for (e)glibc system
since the regexp in config.mk.in is based on "linux-gnu".
Change this regexp to match "linux-uclibc".
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: clarify the comment explaining why we only build/install the
shared library when BR2_STATIC_SHARED_LIBS=y.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The old location doesn't seem active any more. Even though this github URL
looks a bit odd, it is linked from
https://github.com/SELinuxProject/selinux/wiki/Releases
Also add a .hash file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi-firmware only installs images files, so it should use
_INSTALL_IMAGES_CMDS and not _INSTALL_TARGET_CMDS.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add hash file.
- Rewrap Config.in help text and remove trailing whitespace.
- Remove unneeded empty new line at the end of the .mk file.]
Signed-off-by: Ernesto L. Williams Jr <ernesto@slac.stanford.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by bluez5_utils upstream developers, use an improved
version of the mcaptest patch that only conditionally links on librt
instead of unconditionally linking against it (glibc after 2.17 have
clock_getres() in libc and not in librt).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit should have been part of the "libsemanage: new package"
commit, but due a mistake, the former commit was pushed before those
changes were squashed into it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Too many changes to list, but lots of fixes and enhancements all over
the place...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Fix typo in patch description.
- Remove trailing whitespace in Config.in.
- Fix Config.in comment to match what's specified in the Buildroot
manual.
- Adjust .mk logic to use BR2_STATIC_LIBS vs. BR2_SHARED_LIBS instead
of BR2_PREFER_STATIC_LIB, and therefore support the installation of
only the shared library.
- Remove the libustr-debug library from the target and staging
directories, it's the same as libustr, except that it's compiled
with debugging symbols.
- Always install only the shared variant of the library for
host-ustr.]
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add hash file.
- Enable on all architectures, and enable on uClibc. The
autobuilders will let us know if there are any problems.
- Use "Public Domain" as the license instead of "PublicDomain"
- Handle Python 2 vs. Python 3 for the host package. Either can be
used by libselinux.
- Change the trick used to get the library and programs installed in
usr/lib/ and usr/sbin/ instead of lib/ and sbin/.]
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The no thread support in imagemagick is broken since the last
bump. Since supporting non-threaded configurations is not that
important, let's simply make imagemagick depend on thread support.
Fixes:
http://autobuild.buildroot.org/results/4e6/4e6d0bbe120579ab4a54960ee794e8cf64b99e80/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other packages might depend on lcms2, thus it should install its
development files.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other packages might depend on sane, thus it should install its
development files.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rename patch to the proper naming convention, and add a
description to it.
- Add mandatory dependency to OpenSSL.
- Make the dependency on libwebsock optional.
- Remove select of host-gengetopt, since this package no longer has
a menuconfig option.
- Add missing toolchain option dependencies inherited from selected
packages.
- Add proper Config.in help text.
- Fix the .mk comment header to the proper format.
- Use the github function and remove the unneeded SITE_METHOD
variable.
- Add support for optional Opus and Libogg support.
- Remove hash file, since the package is fetched from github.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a host only package, which will be needed for janus-gateway.
[Thomas:
- Improve commit log.
- Remove target variant of the package, not needed as we don't do
development on the target.
- Remove Config.in.host option for the package, there is not really
a need to select it from menuconfig, it's merely a build
dependency for another package.
- Fix format of hash file.
- Fix format of comment header in .mk file.
- Use BR2_GNU_MIRROR.
- License is GPLv3+, not GPLv3.
- Add 'LICENSE' to the license files, as it indicates that the
license is GPLv3+.
- Add an explanation about $(MAKE1) being used.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add better Config.in help text.
- Fix the hash file format.
- Fix comment header in .mk file.
- Remove SOURCE variable, as it had the default value.
- Add dependency on host-pkgconf, used by the configure script.
- Add LICENSE and LICENSE_FILES variables.
- Do not use BR2_HAVE_DOCUMENTATION, this option has been
removed. Instead, always disable doxygen.
- Simplify the IPv6 test.
- Add optional dependency on OpenSSL.
- Fixup the handling of the --enable-ndebug.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch should have been part of the commit adding the libsrtp
package, as it fixes a number of build issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add dependency on BR2_TOOLCHAIN_HAS_THREADS
- Improve Config.in help text
- Fixup comment header in .mk file.
- Use github helper.
- Remove hash file (we're downloading from Git)
- Fixup LICENSE_FILES
- Remove LIBWEBSOCK_CFLAGS, they were the default.
- Remove LIBWEBSOCK_LIBS, and instead use a patch to switch
libwebsock configure script to use pkg-config.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add better Config.in help text and fix its indentation
- Fix comment header in .mk file
- Uncomment useful commented lines in .mk file (SITE and AUTORECONF)
- Add LICENSE_FILES variable.
- Add handling of static/shared libraries build/installation.
- Add dependency on host-pkgconf, so that libsrtp installs its own
.pc file.
- Add optional dependency on OpenSSL.
- Use github helper.
- Remove hash file, since we're downloading from Git.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove unneeded comment in Config.in
- Remove select if libiconv, not needed
- Add dependency on wchar, needed when we depend on gettext
- Improve Config.in help text
- Fix the format of the hash file to make it actually useful
- Fix the comment header in the .mk file
- Remove useless commented line in .mk file
- Fixup license information: it's not under GPLv3, but under LGPLv3+
(library) and GPLv3+ (test programs)
- Add host-pkgconf to the dependencies, remove libiconv from the
dependencies.
- Add a comment to explain why autoreconf is needed.
- Remove usage of $(MAKE1) that does look necessary.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rename patch to the proper naming convention
- Reduce patch to only take care of the IPv6 case
- Add description in the patch
- Propagate libglib2 dependencies in Config.in + added the
corresponding comment.
- Added a real help text, and fixed the help text indentation.
- Fixed the comment header in the .mk file to have the right number
of # signs.
- Added the license informations
- Added a dependency on host-pkgconf, used by the configure script
- Added --without-gstreamer and --without-gstreamer-0.10 to be
explicit about the fact that we don't support GStreamer in libnice
for now.
- Fixed the hash file to have the proper format.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As source url use the git repository instead of the unavaiable svn
repository.
This fix the following error:
svn: E670002: Unable to connect to a repository at URL 'svn://svn.netsurf-browser.org/trunk/libsvgtiny'
svn: E670002: Unknown hostname 'svn.netsurf-browser.org'
[Thomas: use http:// access to the Git repository, as suggested by
Baruch.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Backtrace is disable by default now so remove the definition to avoid
duplicate warnings.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
upmpdcli cannot be built with the Blackfin toolchains, but the comment
could be shown with such toolchains, which doesn't make sense. This
commit properly propagates the toolchain exceptions of the package
config symbol to the Config.in comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.org/results/bc3/bc32c15ba569e700e401ddf97faba584fc16c4cc/
The real error is in the config.log:
configure:15081: checking for UpnpInit in -lupnp
configure:15106: /home/thomas/projets/buildroot/output/host/usr/bin/nios2-linux-gnu-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 c
onftest.c -lupnp -lpthread -lrt >&5
/home/thomas/projets/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/4.8.3/../../../../nios2-linux-gnu/bin/ld: /home/thomas/projets/buildroot/output/host/usr/nios2-buildroot-linux-gnu/sysroot/usr/lib/crt1.o: undefined reference to symbol '_gp'
/home/thomas/projets/buildroot/output/host/usr/nios2-buildroot-linux-gnu/sysroot/usr/lib/libthreadutil.so.6: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
configure:15106: $? = 1
[...]
configure:15125: error: libupnp not found
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch to libsigsegv that indicates the stack
direction on Nios II, which is needed for libsigsegv to build properly
on this architecture.
Fixes:
http://autobuild.buildroot.org/results/943/9436c3208cfeee9bd3bc211df007e745fe13c2c2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit renames the libsigsegv patches to the new convention, and
converts them to Git formatted patches. Along the way, it also aligns
the description of the different patches, in a preparation for
upstream submission.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to repeat OPROFILE_BINARIES += many times to add more
values to the variable. Just define it once with all the values, as we
do everywhere else in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OPROFILE_AUTORECONF = YES was added in commit
99fc6299db ("oprofile 0.9.8: fix
compilation on powerpc") together with a patch touching
configure.ac. However, since then, OProfile was bumped to 0.9.9 and
then 1.0.0, and through those bumps, all patches touching configure.ac
and .m4 files have been removed since they have been merged
upstream. AUTORECONF = YES is therefore no longer necessary, and an
OProfile build was successfully tested with autoreconfiguring the
package.
We can also remove the OPROFILE_CREATE_FILES post-patch hook, which
was only needed to create files required by the autoreconf process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch to OProfile that ensures <time.h> is included
whenever nanosleep() is used, which fixes a build failure on uClibc
toolchains with no thread support.
Fixes:
http://autobuild.buildroot.org/results/d28/d28447c1241ce3dd237710e388d799139d7d613d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a space between the hash and filename so the hash can be used.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch aligns the libxml2-config.cmake module to what the libxml-2.0.pc set.
This patch has already been sent upstream:
https://mail.gnome.org/archives/xml/2014-December/msg00015.html
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch to libnftnl to add the Libs.private field in
the pkg-config file, which is needed for proper static linking of
applications using libnftnl.
Fixes the build of programs such as nftables on Blackfin:
http://autobuild.buildroot.org/results/061/06166344cc8e162d3f901c70ee31ce07e481053e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the user specifies a number of blocks (and we do not auto-compute
them), the generated filesystem can be quite large with large zones with
only zeroes in them.
Thus, always create the filesystem as a sparse file.
Sparse files behave the same as normal files, except those long runs of
zeroes do not actually use space on the (host) filesystem. Also, this
should not break current behaviour, as neither cp nor dd nor cat preserve
sparseness by default. So users relying on the zeroed parts to actually
be written won;t see a change. Users that were expressly using cp or dd
to copy files to a sparse destination will however see a little bit of
improvements, as the zeroed out parts won't even be read from disk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the line of commit 530693787b ("package/freerdp: do not use Neon
extensions when not available") done by Yann E. Morin, freerdp also
passes an explicit -mfloat-abi= flag, and defaults to softfp. This
obviously breaks badly when building an EABIhf system.
This commit therefore fixes freerdp.mk to pass the appropriate
ARM_FP_ABI value to freerdp's build system.
Fixes:
http://autobuild.buildroot.org/results/6ca/6ca9de1a11c675533baa68f7a6bf7b6af7cb4345/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps to 7.8.1, and updates the logic to use .tar.xz
tarballs so that it applies to all 7.8.x versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since SourceForge sometimes serves us faulty tarballs, we can tons of
autobuild failures:
http://autobuild.buildroot.org/results/9fb/9fba5bf086a4e7a29e5f7156ec43847db7aacfc4/http://autobuild.buildroot.org/results/6c8/6c837b244c45ac3b3a887734a371cd6d226cf216/
...
Fix that by adding hash files for all SourceForge-hosted packages (thos
etht did not already have it).
We normally prefer to use hashes published by upstream, but hunting them
all one by one is a tedious task, so those hashes were all locally
computed with a script that searched for SF-hosted packages, downloades
the associated tarball, computed the hash, and stored it in the
corresponding .hash file.
Also, SF publishes sha1 hashes, while I used the stronger sha256, since
sha1 is now considered to be relatively weak.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the XBMC -> Kodi rename, some instance of 'xbmc' were left out,
which meant our startup script would not run Kodi, and that Kodi would
create its /.kodi directory.
This patch renames the missing bits.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With support for new gTLDs and updated TLDs.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we forcibly expand the generated filesystem by 1300 blocks
(i.e. a bit more than 1MiB) when we need to generate an ext3 or ext4
filesystem, even if the user already supplied us with the size it wants
the filesystem to be.
In that case, we overshoot what the user requested, which is bad because
the filesystem may no longer fit in the partition it is supposed to be
written into.
Only add extra blocks when we do compute the required size, not when the
user specifies the size.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add hash file.
And make the libsgutils2 support (from sg3_utils) deterministic.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2.22 is getting quite old (Nov 2011) and we've recently added 2.25. 2.24 has
been used for the "new" architectures for a while and there's no known
issues going to 2.24 for the rest, so bump the default version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lftp try to link with -L/usr/lib/lftp/$(LFTP_VERSION) if
DESTDIR is not set.
Remove useless -L option which point to a location where
no libraries are installed.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typo in patch description.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TightPNG encoding speeds up HTML5 based VNC clients like noVNC.
libvncserver enables this encoding if both libpng and jpeg libraries
are available.
[Thomas: rewrap Config.in help text.]
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Do not let FreeRDP decide whether it can use SE2 opcodes, it may well
fail to do so, because the heuristic is not working for
cross-compilation.
Also, we do have a Kconfig option stating whether we have SSE2 or not,
so reuse that.
Similar to the recent ARM+Neon fix.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FreeRDP mis-detects the CPU, and may enable Neon extensions when it
should not. Not all ARM processors have Neon extensions.
Heck, what's more, none non-ARM processor has Neon extensions!
The regexp to detect the CPU is borked: 'arm*' will also match 'arc'
as well as 'arm'.
Do not let FreeRDP try to decide if it can use Neon extensions, we have
a Kconfig option for that, that we can use to force FreeRDP to use it or
not.
Should fix:
http://autobuild.buildroot.org/results/d4a/d4a61e686cf11d993d02ece0c4e2835a926603c2/http://autobuild.buildroot.org/results/234/2349d40ef8d658ab1cd7332eb1b42a75afcd423f/
...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Last bump (dd3a2d6) forgot to update the hash for the new version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the past xbmc delivered its own ffmpeg source code with specific patches to
address bugs found during the use of xbmc. For Helix the ffmpeg source code was
removed, Helix uses a vanilla ffmpeg source tarball and applies this patchset
on top of it.
Downloaded from
https://github.com/xbmc/FFmpeg/compare/FFmpeg:release/2.5...release/2.5-xbmc.patch
[Thomas: use individual patches instead.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This also enables dvdcss support, provided by an internal library.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the rename of the XBMC project to Kodi, this commit renames
the xbmc-addon-xvdr package to kodi-addon-xvdr, and adds the
appropriate Config.in.legacy handling.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the rename of the XBMC project to Kodi, this commit renames
the xbmc-pvr-addons package to kodi-pvr-addons, and adds the
appropriate Config.in.legacy handling.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- delete 0002-mathutil.patch, committed upstream
- delete 0003-dbus.patch, committed upstream
- add dependency to ffmpeg, xbmc does not deliver its own ffmpeg anymore
- remove dependency to flac & lame, audio encoders have been seperated from kodi
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Background information: http://xbmc.org/introducing-kodi-14. In a
first step to bump version to 14.0-Helix, we move the xbmc package to
a new directory called kodi.
Appropriate Config.in.legacy variables are added.
[Thomas: rename patches to the new convention.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libvncclient library (part of libvncserver) has optional support
for HW accelerated H264 video playback using libva
However there are currently two problems with it:
1) it only supports libva compiled with X11 support enabled, but it
does not verify that is the case, resulting in compile errors.
2) it only supports the libva 1.0.x API, and not newer
libva versions, like 1.4.x we include with buildroot.
https://github.com/LibVNC/libvncserver/issues/11
Disabling libva support for now.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When curl support is enabled in xerces, and a host curl is available
on the system, it might try to use it, so this patch adds --with-curl=
to the configure options to explicitly indicate where is the curl
library to use.
Should fix:
http://autobuild.buildroot.org/results/c3c/c3c6be45d0f764fb931a46dbf1509ccf2916ecbf/
(We were not able to reproduce specifically this problem, but
another similar problem, where curl was detected, but considered as
non-working because of the compilation failure of a test program.)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The curl-config patch that makes sure to not use curl-config from the
PATH but the curl-config program specified at configure time was
forgetting a number of other places. So we change the strategy, and
make the configure.in script define a $CURL_CONFIG variable that can
be used in Makefiles where appropriate.
This means we need to run autoconf (but not AUTORECONF = YES since the
package uses autoconf but not automake).
This fixes build failures in cases where a curl-config program is in
the PATH. Fixes:
http://autobuild.buildroot.org/results/06b/06b7eada721483eb57adde147768a1f306b7d0d7/
(and many similar ones)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit bumps libxmlrpc to the latest available stable version,
and adds a hash file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
libiio correctly builds as a static library, there is no obvious reason
to force the shared object build.
So, let the CMake BUILD_SHARED_LIBS variable handles the type of library
built.
This libiio patch has already been submitted upstream:
https://github.com/analogdevicesinc/libiio/pull/6
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Explicitly pass the path to libtldl, libgmp and libunistring, so that
guile does not try to use host versions when available.
Fixes:
http://autobuild.buildroot.org/results/056/056b7fcbf3b73a8d15ca635b000771cdc2d7fbf9/
And another similar problem with libgmp and libunistring.
[Thomas: added --with-libunistring-prefix, as suggested by Samuel
Martin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
--enable-runas-user use 'news' as default but the configure stop
if news doesn't exist on the build host.
Use 'root' while cross-compiling
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building docs requires dblatex with a working Jade Wrapper (jw) which
may well be missing on the build machine, and we do not build our own.
Since docs are anyway removed from the target, just do not build them.
Tell ./configure that we do not have the required tools:
- DBLATEX=no to disable PDF generation
- DOCBOOK2X_MAN=no, DOCBOOK2MAN=no and DB2X_DOCBOOK2MAN=no to disable
manpage generation
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use pcap-config to list optional libpcap dependencies needed for static
link. Otherwise we will see errors like this one:
/br/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libpcap.a(pcap-canusb-linux.o):
In function `canusb_close':
pcap-canusb-linux.c:(.text+0xec): undefined reference to `libusb_close'
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[yann.morin.1998@free.fr: remove the ncurses bits (done differently in
another patch), fix BR2_PREFER_STATIC_LIB -> BR2_STATIC_LIBS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kismet's ./configure hard-codes host paths in its include search paths.
Fix that by removing the offending paths.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Says Vicente:
[T]he order is very important when doing static builds.
Otherwise we will see errors like this one:
[...]/sysroot/usr/lib/libpanel.a(p_delete.o):
In function `del_panel':
p_delete.c:(.text+0x68): undefined reference to `_nc_panelhook'
Fix the order configure adds libraries: new libraries should be added
at the *front* of the list, not at the end.
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nsenter is a tool to enter the namespace of another process.
[Thomas: add dependency to 3.0 kernel headers, since the setns()
system call was added in Linux 3.0.]
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add comment about AUTORECONF = YES, noticed by Baruch Siach, and
suggested by Yann E. Morin.
- add dependency on host-pkgconf, since the configure script uses
PKG_CHECK_MODULES.]
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added accidentally in 1e93aa4b99.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is necessary to successfully build guile with toolchain
missing support for getcontext.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: add a comment, change variable name, use
AS_IF, remove debug traces, use AC_CHECK_FUNCS (Thomas)]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
guile build-depends on libtool, but forgot to select it Kconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a buffer overflow which may allow an attacker to gain write
access to memory.
CVE requested but not yet assigned.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Raise an error if the host is using an older kernel than the target.
Since qemu-user passes emulated system calls to the host kernel,
this prevents usage of qemu-user in situations where those system
calls will fail.
This is based on an original patch from Frank Hunleth
<fhunleth@troodon-software.com>, but completely rewritten in a
different way:
* Instead of using shell based testing, we use pure make tests, which
allows to detect the problem not when host-qemu starts to build,
but at the very beginning of the entire Buildroot build.
* Instead of looking at $(STAGING_DIR)/usr/include/linux/version.h
(which requires having a dependency on the 'toolchain' package,
which is a bit unusual for a host package), we use the
BR2_TOOLCHAIN_HEADERS_AT_LEAST Config.in option which tells us the
version of the kernel headers used in the toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
This allows qemu-user to be selected by the user. One use case
for this is to call qemu-user from post build scripts to
run regression tests against the build.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use proper status messages, make spacing standard instead of a mix of
spacing/tabbing, drop boringly obvious comment from the header.
Also make reload = restart since ntpd doesn't handle reloading resulting
in the old reload being 'stop'.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop redundant IP version and double default restrict.
Tweak KoD and other defaults for properness.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-9293 - ntpd generated a weak key for its internal use, with
full administrative privileges. Attackers could use this key to
reconfigure ntpd (or to exploit other vulnerabilities).
CVE-2014-9294 - The ntp-keygen utility generated weak MD5 keys with
insufficient entropy.
CVE-2014-9295 - ntpd had several buffer overflows (both on the stack and
in the data section), allowing remote authenticated attackers to crash
ntpd or potentially execute arbitrary code.
CVE-2014-9296 - The general packet processing function in ntpd did not
handle an error case correctly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds support for displaying more than 127 lines.
Also, switch to a git tree that carries the latest version.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The latest version is only available from git.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rebar is used to compile Erlang packages.
We need host variant so as to be able to provide it to Erlang packages
that do not bundle their own version, or bundle a broken version.
Since this is a host-only package, used only internally, we do not
provide a Kconfig option for it. Packages that need it will depend on
it.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: extract host-rebar to its own patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps opkg to 0.2.4, and adds a new patch to fix a build
failure apparently caused by the recent bump of the libtool version:
http://autobuild.buildroot.org/results/5fc/5fc9fa24563213d1ad77e55ab52c8e59bf21055f/
It also refreshes the existing patch, turns it into a Git formatted
patch, and fixes a typo in its title.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libnss_wins and libnss_winbind libraries were installed in this way:
/lib/libnss_<service>.so
/lib/libnss_<service>.so.<major> -> /lib/libnss_<service>.so
This had been done like this in order to get something similar to the
other NSS libraries, which are usually installed in this way:
/lib/libnss_<service>-<version>.so
/lib/libnss_<service>.so.<major> -> /lib/libnss_<service>-<version>.so
However, besides these files, these other NSS libraries usually come
installed with:
/usr/lib/libnss_<service>.so -> /lib/libnss_<service>.so.<major>
This means that the NSS libraries follow the usual library installation
practice, i.e. that the non-versioned .so is a symlink to the versioned
.so, so that switching versions is easy. In the case of the NSS
libraries, the versioned .so is just also a symlink to a .so with a more
accurate version.
Hence, follow the same rules for libnss_win*.so*, and install these
libraries the other way around:
/lib/libnss_<service>.so -> /lib/libnss_<service>.so.<major>
/lib/libnss_<service>.so.<major>
This is also how these libraries are installed by a major OS like Ubuntu
14.10:
/lib/x86_64-linux-gnu/libnss_winbind.so -> libnss_winbind.so.2
/lib/x86_64-linux-gnu/libnss_winbind.so.2
/lib/x86_64-linux-gnu/libnss_wins.so -> libnss_wins.so.2
/lib/x86_64-linux-gnu/libnss_wins.so.2
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This ccache support for host-cmake-package uses the same logic as the
one done for the target packages in the toolchainfile.cmake file.
[Thomas: fix lots of mistakes.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Backport a patch applied upstream to allow building without Qt
accessibility.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libiio is a library to ease the development of software interfacing
Linux Industrial I/O (IIO) devices.
http://wiki.analog.com/resources/tools-software/linux-software/libiio
[Thomas:
- Remove changelog from the commit log.
- Rename init script to S99iiod instead of S99iiod.sh
- Remove "status" command from init script, and implement "restart"
instead.
- Add dependency on thread support in toolchain.
- Fixup indentation in the .mk file.
- Fixup wrapping in the Config.in help text.]
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When both shared and static libs are enabled, we have two shell
constructs to run, but they are not properly separated, leading to build
failures like:
ln -sf libncursesw.a /home/idnc_sk/IOLINUX/builds/micro-x86_64-corei7/
output/host/usr/x86_64-buildroot-linux-uclibc/sysroot/usr/lib/libcurse
s.a for lib in libncurses libmenu libpanel libform; do ln -sf ${lib}w.
so /home/idnc_sk/IOLINUX/builds/micro-x86_64-corei7/output/host/usr/x8
6_64-buildroot-linux-uclibc/sysroot/usr/lib/${lib}.so; done
/bin/bash: -c: line 0: syntax error near unexpected token `do'
/bin/bash: -c: line 0: `ln -sf libncursesw.a /home/idnc_sk/IOLINUX/bui
lds/micro-x86_64-corei7/output/host/usr/x86_64-buildroot-linux-uclibc/
sysroot/usr/lib/libcurses.a for lib in libncurses libmenu libpanel lib
form; do ln -sf ${lib}w.so /home/idnc_sk/IOLINUX/builds/micro-x86_64-c
orei7/output/host/usr/x86_64-buildroot-linux-uclibc/sysroot/usr/lib/${
lib}.so; done'
As can be seen, there is a missing semi-colon ';' between the symlink
command and the for loop:
ln -sf libncursesw.a [...]/libcurses.a for lib in [...]
Fix that by adding a semi-colon after each first shell constructs, to
properly separate the two. If the second one is not enabled (i.e. for a
static-only build), there is a trailing semi-colon, but that's perfectly
valid shell syntax.
Reported-by: idnc_sk on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove dependency on host-python-markdown, apparently not needed
(it builds fine in a minimal chroot, which doesn't have
python-markdown installed)
- Remove runtime dependency on markdown, I can run Cheetah basic
examples without python-markdown installed.
- Add dependency on Python 2 only, since it doesn't build for Python
3.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove host variant of python-markdown, as it is not needed.
- Add runtime dependency on Python XML module.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libtool sometimes requires help2man to build manpages, but since we
don't use/need them and want to avoid pulling in and/or building
dependencies for that we just disable it. Fixes:
http://autobuild.buildroot.net/results/bfb/bfb9e298196d877b623580f882b6fe74b30bec9b/
Also add host-m4 as dependency, it's not strictly required but silences
many build warnings.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix license from GPLv2 to 'GPLv2+ with OpenSSL exception'
- add -std=c99 to CFLAGS, otherwise it doesn't build with a minimal
toolchain configuration
- add BR2_USE_MMU dependency since fork() is used.]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-3580: mod_dav_svn DoS from invalid REPORT requests.
CVE-2014-8108: mod_dav_svn DoS from use of invalid transaction names.
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch is upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to support newer (>2.4.2) versions.
Adjust patch logic to check for patchlevel greater than 2 (apply new patch) or
not (apply current patch).
Some people/distributions used unreleased versions, with the string being
2.4.2.x, this packages are AUTORECONFed and have to be kept like this since
the up-to-2.4.2 patch doesn't work, neither does the from-2.4.3 version patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is an alternative to python-enum34 with a somewhat different API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we can build a static-only zlib, but not a shared-only one.
This is because zlib's build-system is a custom ./configure (not using
autotools), and does not allow building/installing only the shared
library.
Simply remove the .a as a post-staging install hook. We don't care
removing it from target, since it is not used at link time to build
other packages, and it is anyway removed later before assembling the
filesystem images anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove opcontrol and oprofiled from the install list, they are no longer
present in the package.
Remove all patches, they have been integrated upstream.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rpi-userland is a provider for some virtual packages, so we can not
select it, as instructed in the manual:
http://nightly.buildroot.org/#_infrastructure_for_virtual_packages
---8<---
If your package really requires a specific provider, then you’ll
have to make your package depends on this provider; you can not select a
provider.
---8<---
Instead, just depend on it. Remove the comment as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
ERROR: unsafe header/library path used in cross-compilation: '/usr/include/libnl3'
Add a dependancy on host-pkgconf when BR2_PACKAGE_LIBNL is enabled.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reported-by: Jörg Krause <jkrause@posteo.de>
Cc: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
json-c website and download locations have changed, the project is now
hosted on Github.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
old SITE is now password-protected
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
old SITE is now password-protected
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- old SITE is now password-protected
- add hash
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If libatomic_ops was enabled, then the host-erlang dependency was lost.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Snappy doesn't configure without host pkg-config, causing this totally
unhelpful diagnostic from autoconf:
configure.ac:42: error: possibly undefined macro: AC_DEFINE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:44: error: possibly undefined macro: AC_MSG_FAILURE
So add host-pkgconf to the package's DEPENDENCIES list.
Signed-off-by: Steve James <ste@junkomatic.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To fix:
CVE-2013-7041 - use case sensitive comparison in pam_userdb
CVE-2014-2583 - potential path traversal issue in pam_timestamp
Also add hash file (computed, the hash files upstream cover up to 1.1.7)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2014-8142 - Use after free vulnerability in unserialize()
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-1569 - The definite_length_decoder function in
lib/util/quickder.c in Mozilla Network Security Services (NSS) before
3.16.2.4 and 3.17.x before 3.17.3 does not ensure that the DER encoding
of an ASN.1 length is properly formed, which allows remote attackers to
conduct data-smuggling attacks by using a long byte sequence for an
encoding.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use proper status messages, make spacing standard instead of a mix of
spacing/tabbing, drop boringly obvious comment from the header.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The CF_LIB_SONAME macro doesn't work when cross compiling so we need to
specify the lib name for libgpm explicitly. While at it make gpm support
explicit in the form of --without-gpm when it's not selected and adding
it to dependencies when it is. Fixes:
http://autobuild.buildroot.net/results/32a/32a5ba3905772a3f2f2ec9d1b290a109fe22d9f9/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, ncurses creates symlinks from the non-'w' variants to the
equivalent 'w' variant, but forgets to do so for pkg-config files.
To be able to share the same list between the libraries and the
pkg-config files to symlink, just trim the 'lib' prefix of libraries in
the definition, and just add it back at the time we need it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the definition of libraries to install before it is actually used.
Also, in a coming changeset, it will also be used to know which
pkg-config files to symlink.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For a shared-only build, do not create the symlinks to the static
libraries, since they do not exist.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No need to duplicate the host-pkgconf dependency on the Qt case, we
already depend on it in the general case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In case the libgcrypt development files are present on the host system,
collectd's ./configure will mistakenly try to use them and will call the
host system's libgcrypt-config, thus leading it to use path to the host
system includes and libraries.
Fix that in two ways:
- explicitly disable libgcrypt support when libgcrypt is not enabled;
- pass the complete path to libgcrypt-config when libgcrypt is enabled.
However, collectd's configure.ac is utterly broken. The code in
configure.ac has special code to check for libgcrypt-config, and use
whatever is provided via --with-libgcrypt=/path/to/libgcrypt-config. But
that is promptly forgotten because they then call the AM_PATH_LIBGCRYPT
macro, that just does it all again from scratch, and does not use the
value previously found.
Instead, we set LIBGCRYPT_CONFIG in the environment and point it to our
own libgcrypt-config.
Should fix numerous build issues:
http://autobuild.buildroot.net/results/ad4/ad408aef5fb92fe9e031c7dbaf6999776b40ace4/http://autobuild.buildroot.net/results/967/96735bfa91bcf2e3dff89f69c0a12ed406e9efb9/
...
http://autobuild.buildroot.net/results/3bd/3bdd9bdffb1d55414787d38fc2656d7a3391a957/
...
(the first two are with the paranoid wrapper, the third one was before
the paranoid wrapper.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable run test for pthread detection.
In case of build with only static library, CMake fails to detect the
pthread library (-lpthread), so it falls back trying to link using
-pthread and execute the test program.
<snip>
[...]
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - not found
-- Check if compiler accepts -pthread
CMake Error: TRY_RUN() invoked in cross-compiling mode, please set the following cache variables appropriately:
THREADS_PTHREAD_ARG (advanced)
For details see /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/TryRunResults.cmake
-- Check if compiler accepts -pthread - no
-- Found Threads: TRUE
-- Udev rules not being installed, install them with -DINSTALL_UDEV_RULES=ON
-- Building with kernel driver detaching disabled, use -DDETACH_KERNEL_DRIVER=ON to enable
-- Building for version: 0.5.3 / 0.5.3
-- Using install prefix: /usr
-- Configuring incomplete, errors occurred!
See also "/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeOutput.log".
See also "/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeError.log".
</snip>
Here it fails because, in the CMake FindThreads.cmake file, the
'try_run' function is unconditionally called [1].
Also, the CMakeError.log gives more details why linking with -lpthread
fails:
<snip>
[...]
Run Build Command:"/usr/bin/make" "cmTryCompileExec3012181287/fast"
make[1]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/usr/bin/make -f CMakeFiles/cmTryCompileExec3012181287.dir/build.make CMakeFiles/cmTryCompileExec3012181287.dir/build
make[2]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_progress_report /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp/CMakeFiles 1
Building C object CMakeFiles/cmTryCompileExec3012181287.dir/CheckFunctionExists.c.o
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -DCHECK_FUNCTION_EXISTS=pthread_create -o CMakeFiles/cmTryCompileExec3012181287.dir/CheckFunctionExists.c.o -c /home/buildroot/instance-1/output/host/usr/share/cmake-3.0/Modules/CheckFunctionExists.c
Linking C executable cmTryCompileExec3012181287
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec3012181287.dir/link.txt --verbose=1
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -DCHECK_FUNCTION_EXISTS=pthread_create -static CMakeFiles/cmTryCompileExec3012181287.dir/CheckFunctionExists.c.o -o cmTryCompileExec3012181287 -rdynamic -lpthread -Wl,-Bstatic -lusb-1.0 -Wl,-Bdynamic
/home/buildroot/instance-1/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libpthread.a(init.os): In function `__pthread_initialize_minimal':
init.c:(.text+0x270): undefined reference to `__libc_setup_tls'
collect2: error: ld returned 1 exit status
CMakeFiles/cmTryCompileExec3012181287.dir/build.make:89: recipe for target 'cmTryCompileExec3012181287' failed
make[2]: *** [cmTryCompileExec3012181287] Error 1
make[2]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
Makefile:118: recipe for target 'cmTryCompileExec3012181287/fast' failed
make[1]: *** [cmTryCompileExec3012181287/fast] Error 2
make[1]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
Determining if compiler accepts -pthread returned PLEASE_FILL_OUT-FAILED_TO_RUN instead of 2. The compiler had the following output:
Change Dir: /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp
Run Build Command:"/usr/bin/make" "cmTryCompileExec1361818630/fast"
make[1]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/usr/bin/make -f CMakeFiles/cmTryCompileExec1361818630.dir/build.make CMakeFiles/cmTryCompileExec1361818630.dir/build
make[2]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_progress_report /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp/CMakeFiles 1
Building C object CMakeFiles/cmTryCompileExec1361818630.dir/CheckForPthreads.c.o
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -o CMakeFiles/cmTryCompileExec1361818630.dir/CheckForPthreads.c.o -c /home/buildroot/instance-1/output/host/usr/share/cmake-3.0/Modules/CheckForPthreads.c
Linking C executable cmTryCompileExec1361818630
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec1361818630.dir/link.txt --verbose=1
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -static CMakeFiles/cmTryCompileExec1361818630.dir/CheckForPthreads.c.o -o cmTryCompileExec1361818630 -rdynamic -pthread
make[2]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
make[1]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
</snip>
While falling back on -pthread is correct when using only static
libraries to get some tls-related macros defined [2,3], it is wrong to
try to run the test program in case of cross-compilation.
So, this patch only disable run test when pthread support is done using
-pthread, i.e. in case of the type of libraries is "static only".
Fixes:
http://autobuild.buildroot.org/results/26c/26cb8c2e5f867d49451f61304bf0a1a6f7b825d9/
[1] http://www.cmake.org/gitweb?p=cmake.git;a=blob;f=Modules/FindThreads.cmake;h=a0bc4d133eb3f9d3ae096f0e03e419ef7be66ce8;hb=HEAD#l84
[2] http://lists.busybox.net/pipermail/buildroot/2014-June/100690.html
[3] http://stackoverflow.com/questions/23250863/difference-between-pthread-and-lpthread-while-compiling
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Makefile is hardcoded for /usr/include/ncurses, so override it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Romain Naour <romain.naour@openwide.fr>
Changeset f1d3e09 (Build shared libraries only as the default) broke the
nmap package.
nmap builds an internal version of libdnet, and tries to statically link
against it. Of course, this breaks for shared-only builds, since in that
case there is no static lib ever built.
Using an external libdnet is not really an option:
- libdnet comes from dnprogs, from the linux-decnet project;
unfortunately, their build-system is not amenable to
cross-compilation, and is a real pain to deal with;
- nmap's bundled libdnet is anyway heavily modified, which precludes
using an external libdnet.
Fix that by considering libdnet to be a purely internal library, and by
configuring it with --enable-static, always.
nmap's ./configure uses AC_CONFIG_SUBDIRS() to configure the libdnet
sub-directory; AC_CONFIG_SUBDIRS() calls ./configure in all the
sub-directories it is passed as arguments. Unfortunately, it is not
possible to specify extra ./configure arguments whith AC_CONFIG_SUBDIRS.
We are using an autoconf trick, which is, when configuring
sub-directories with AC_CONFIG_SUBDIRS(), it will first try to execute
configure.gnu if it exists, before it fallbacks to running plain
configure. See:
https://www.gnu.org/software/autoconf/manual/autoconf.html#Subdirectories
So, we provide a configure.gnu that is just a wrapper around the real
configure, which sole purpose is to append --enable-static when calling
the real configure.
Note1: since this libdnet is considered a purely internal library, we
also always pass --disable-shared, since it is not needed at all.
Note2: since this libdnet is considered a purely internal library, it
should not be exposed to other packages, and thus nmap does not install
it, neither in target nor in staging, neither static nor shared, which
is what we want.
[Peter: explain why post-patch hook is used]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changeset f1d3e09 (Build shared libraries only as the default) broke the
berkeleydb package.
For some reason, we had a very strange post-configure action in bdb:
$(SED) 's/\.lo/.o/g' $(@D)/build_unix/Makefile
This means that it is using non-libtool object files. This breaks
building shared-only.
This code has been present almost the whole time we've had a berkeleydb
package, that is:
- November 2003: use a sed expression instead of perl
- March 2003 : use a perl program
- August 2002 : introduce berkeleydb
Getting rid of this sed expression fixes the build, and allows building
the three new static/shared combinations: static only, shared only,
both static and shared.
Fixes numerous build failures:
http://autobuild.buildroot.net/results/b41/b41e13ec6c13830667770b3731f8990062f202bd/http://autobuild.buildroot.net/results/925/925433ef505b190aa5ac83c23e9359afe4b21829/http://autobuild.buildroot.net/results/9af/9afa0dd835af079411a2ea5d94e5e4db7c993111/
...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erlang/OTP 17.4 is a service release on the 17 track with mostly bug
fixes, but it does contain a number of new features and characteristics
improvements as well.
Some highlights of the release are:
- eldap: Nearly all TCP options are possible to give in the
eldap:open/2 call.
- ssh: Added API functions ptty_alloc/3 and ptty_alloc/4, to allocate a
pseudo tty.
- ssl: Handle servers that may send an empty SNI extension to the client.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other init scripts in Buildroot use start()/stop() instead of
do_start()/do_stop(), so change it here as well for consistency
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other init scripts in Buildroot use start()/stop() instead of
do_start()/do_stop(), so change it here as well for consistency
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other init scripts in Buildroot use start()/stop() instead of
do_start()/do_stop(), so change it here as well for consistency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have clear options for the three cases of shared only,
static only and shared+static, let's use them in ncurses to pass the
appropriate --{with,without}-{shared,normal} options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit turns the single static option into a choice, which offers
various possibilities:
1. Build and use static libraries only;
2. Build both shared and static libraries, but use shared libraries;
3. Build and use shared libraries only.
On most platforms, (2) is currently the default, and kept as the
default in this commit. Of course, on certain platforms (Blackfin,
m68k), only option (1) will be available.
In addition to the introduction of the Config.in options, this commit
also:
* Removes the 'select BR2_STATIC_LIBS' from 'BR2_BINFMT_FLAT', since
with the use of a choice, we are guaranteed that BR2_STATIC_LIBS
will be selected when the binary format is BR2_BINFMT_FLAT, since
BR2_STATIC_LIBS will be the only possible solution in the choice.
* Changes package/Makefile.in to use the proper
--{enable,disable}-{shared,static} options for autotools packages.
[Thomas: remove useless empty newline right after 'choice'. Noticed by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- add BR2_USE_MMU dependency, since fork() is used
- rename do_start() and do_stop() to just start() and stop(), as we
do in most init scripts in Buildroot.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of repeating the check in our download rules, delegate the check
of the hashes to the download wrapper.
This needs three different changes:
- add a new argument to the download wrapper, that is the full path to
the hash file; if the hash file does not exist, that does not change
the current behaviour, as the existence of the hash file is checked
for in the check-hash script;
- add a third argument to the check-hash script, to be the basename of
the file to check; this is required because we no longer check the
final file with the final filename, but an intermediate file with a
temporary filename;
- do the actual call to the check-hash script from within the download
wrapper.
This further paves the way to doing pre-download checks of the hashes
for the locally cached files.
Note: this patch removes the check for hashes for already downloaded
files, since the wrapper script exits early. The behaviour to check
localy cached files will be restored and enhanced in the following
patch.
[Thomas: fix minor typo in comment.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of repeating the same test again and again in all our download
rules, just delegate the check for an already downloaded file to the
download wrapper.
This clears up the path for doing the hash checks on a cached file
before the download.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of relying on argument ordering, use actual options in the
download wrapper.
Download backends (bzr, cp, hg...) are left as-is, because it does not
make sense to complexify them, since they are almost very trivial shell
scripts, and adding option parsing would be really overkill.
This commit also renames the script to dl-wrapper so it looks better in
the traces, and it is not confused with another wrapper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the host variant of packages, we normally only build the shared
libraries. However, ncurses uses non-standard options to select
between shared/static and therefore the host variant was building both
of them, even though the static libraries were unused.
By passing --without-normal, we disable the build of static
libraries. It saves a bit of disk space, and on my laptop,
host-ncurses takes 26 seconds to build instead of 40 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
glibc-2.20 includes some changes to the include/features.h file
introduced by this commit:
https://sourceware.org/git/?p=glibc.git;a=commit;h=ade40b10ff5fa59a318cf55b9d8414b758e8df78
Those changes make libsvgtiny fail because some warnings are thrown and
the build system is using the -Werror option. We disable this to be able
to build it, or otherwise we will see errors like this one:
GPERF: src/colors.gperf
COMPILE: build-Linux-Linux-release-lib-static/src_colors.c
In file included from
/br/output/host/usr/mipsel-buildroot-linux-gnu/sysroot/usr/include/string.h:25:0,
from src/colors.gperf:16:
/br/output/host/usr/mipsel-buildroot-linux-gnu/sysroot/usr/include/features.h:148:3:
error: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use
_DEFAULT_SOURCE" [-Werror=cpp]
and this one:
In file included from src/colors.gperf:18:0:
/home/ldap/vriera/work/mips-buildroots/mips32/output/build/libsvgtiny-12121/src/svgtiny_internal.h:71:0:
error: "strndup" redefined [-Werror]
Fixes:
http://autobuild.buildroot.net/results/3dd/3dd700405055750262738f867eb5aa08531f5781/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libuv has moved to github.com/libuv/libuv
[Thomas: fix Config.in help text, as noticed by Baruch.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a Config.in option to the "Build options" submenu to
enable paranoid checking of unsafe paths. This mechanism is added as
an option so that when we'll enable it in the autobuilders, people
trying to reproduce the build failures will be able to do so by just
downloading the configuration file. If instead we were leaving this
feature as an environment variable, everyone would have to remember to
pass this environment variable to reproduce build issues. And certain
build issues triggered by paranoid unsafe patch checking may not be
visible in the build output, for example when they happen during the
execution of configure scripts.
Since this option is fairly advanced, a new submenu inside "Build
options" is created, for Advanced options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit enables the poison system directories option, which is now
available thanks to the binutils patches that have been added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit enables the poison system directories option, which is now
available thanks to the gcc patches that have been added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.7.4, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc arc-2014.08,
and modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH
environment variable to error out instead of just warn when unsafe
paths are used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.8.3, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.9.1, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
