Bump U-Boot to 2017.01 version and kernel to 4.9.13.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The imx6ul-liteboard dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And use same version for header headers as well.
[Peter: explicitly set BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10 as pointed
out by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
(quad A53), 8/16GB eMMC and 1/2GB RAM.
Both the s905 (gxbb) and s905x (gxl) variant is supported.
This defconfig uses mainline Linux. As the mainline support for s905 is
quite young, use the latest release candidate. There is currently no
support for this board in U-Boot or sources available for the vendor U-Boot,
so the defconfig doesn't build a u-boot and instead uses the existing U-Boot
available in the eMMC. This also means that we need to wrap the kernel as
uImage, which isn't suppported for aarch64. Instead this is done in the
post-build script.
Mainline aarch64 defconfig builds most drivers modular, so add mdev for
module autoloading.
[Peter: explicitly set BR2_cortex_a53=y]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- update to released kernel and U-Boot,
- move the headers config closer to the kernel ones,
- update readme.txt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.01 version and kernel to 4.9.9.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When this qemu nios2 defconfig has been added, the insternal toolchain
used for testing was build with Linux kernel headers 4.9, so
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9 was missing in the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this kernel rev has numerous bug fixes, framework upgrades and new
features added.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this version bump allows usage of hardkernel's secure signatures when
booting a system
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This updates Linux kernel for Synopsys ARC HS38 VDK so it matches real
platform and while at it bump kernel version to the latest.
Main changes:
* Linux kernel v4.9.6 (latest in 4.9.x series in buildroot)
* Add support of MMC controller which is used for rootfs
* Add support of UIO which is used to communicate with EVSS
Now with this update image built by vanilla Buildroot VDK has
working UART, MMC, LCD, Ethernet, UIO etc.
And while at it we rename defconfing so it:
1) Doesn't mention SMP any more - that's the only option anyways now
2) Matches common naming scheme: vendor_arch_platform
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Zakharov Vlad <Vladislav.Zakharov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel 4.9.7 has an important fix: a2104c7cd3b24c432 ("drm/atomic:
clear out fence when duplicating state"), which fixes a kernel
warning that triggers sometimes when starting/stopping ksmcube
application several times in a row.
So bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.9.6 2.6.0 YES OK (3)
arm_versatile 4.9.6 2.5.0 YES OK
arm_versatile_nommu 4.4.45 2.5.0 YES OK
arm_vexpress 4.9.6 2.5.0 YES OK
m68k_mcf5208 4.8.17 2.5.0 YES OK (6)
m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK
microblazebe 4.9.6 2.5.0 YES OK
microblazeel 4.9.6 2.5.0 YES OK
mips32r2el_malta 4.9.6 2.5.0 YES OK
mips32r2_malta 4.9.6 2.5.0 YES OK
mips32r6el_malta 4.9.6 2.6.0 YES OK (3)
mips32r6_malta 4.9.6 2.6.0 YES OK (3)
mips64el_malta 4.9.6 2.5.0 YES OK
mips64_malta 4.8.17 2.5.0 YES OK (6)
mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4)
mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4)
nios2-10m50 4.9.6 2.9.0 NO OK
or1k 4.9.6 2.5.0 NO OK
ppc_g3beige 4.9.6 2.5.0 YES OK
ppc_mpc8544ds 4.9.6 2.5.0 YES OK
ppc_virtex_ml507 4.9.6 2.5.0 NO OK
ppc64_pseries 4.9.6 2.5.0 YES OK
sh4 4.9.6 2.5.0 YES OK
sh4eb 4.9.6 2.5.0 NO (1) OK
sparc_ss10 4.9.6 2.5.0 YES OK
sparc64_sun4u 4.9.6 2.5.0 YES OK
sparc_sun4u 4.9.6 2.5.0 YES OK
x86 4.9.6 2.5.0 YES OK
x86_64 4.9.6 2.5.0 YES OK
xtensa_lx60 4.8.17 2.6.0 YES OK (6)
xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using
mainline U-Boot and mainline kernel.
Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and
kernel versions from NXP.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes:
* Buildroot defconfig
* Mainline Linux kernel v4.9.6
* Mainline U-Boot (current HEAD revision is used, as board support
patches are not in stable release yet)
* genimage config to create sdcard image
* Board readme.txt
[Peter: use http:// instead of git:// for u-boot]
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds yet another development platform for ARC.
This time around it is HAPS or ZeBU based prototyping platform used
widely for both ARC hardware and software bring-up and verification.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.9.6
- set up host linux headers to 4.9
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
You can bootup a OpenRISC system, networking is not working.
[Peter: drop unneeded _GETTY_PORT="ttyS0" setting]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Fix second Ethernet port for SoloX
- Fix LCD disable sequence
- Fix LVDS2 as primary display
Here are the main Linux modifications:
- Rebase on top of NXP 4.1.15_2.0.0 branch
- Fix touch screens interrupt conflicts
- Backport tw686x features from mainline
- Fix multiple ft5x06 touch instantiation
- Fix dirty cow vulnerability
- Various improvements to TC358743 driver
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to Linux kernel version 4.4.32 from the TI SDK 03.02.00.05
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches from 4.8 version don't apply. Update them by backporting
liteBoard support from Linux master branch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is already support in newest U-Boot version, so drop existing
U-Boot patches.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
[Peter: part 2, boot.scr / defconfig changed accidently got dropped]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel versio to 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use mainline 4.9 instead of a custom kernel based on NXP 4.1.
As mx7 boots in non-secure mode in mainline kernel, change the
U-Boot target to "warp7".
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which includes the gcc5+ fix for ftrace:
commit aeea3592a13bf12861943e44fc48f1f270941f8d
Author: Behan Webster <behanw@converseincode.com>
Date: Wed Sep 24 01:06:46 2014 +0100
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
With compilers which follow the C99 standard (like modern versions of gcc and
clang), "extern inline" does the wrong thing (emits code for an externally
linkable version of the inline function). In this case using static inline
and removing the NULL version of return_address in return_address.c does
the right thing.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Otherwise, the build dies with:
arch/arm/kernel/return_address.c:66:7: error: redefinition of ‘return_address’
void *return_address(unsigned int level)
^
In file included from include/linux/ftrace.h:20:0,
from arch/arm/kernel/return_address.c:12:
./arch/arm/include/asm/ftrace.h:48:21: note: previous definition of ‘return_address’ was here
extern inline void *return_address(unsigned int level)
^
For more details, see:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616889
notice: Only build tested as I don't have the hw, which is also why the
kernel is only bumped to 3.18 to make it as safe as possible.
CC: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig currently doesn't build:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616951
As u-boot needs dtc, so add that and change to kconfig mode like on our
other allwinner defconfigs as that is in fact what is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration provides a basic setup for using Buildroot
to create a sd-card image a BeagleBoard X15 board.
[Peter: use 512M ext4 partition, linux 4.9 and u-boot 2016.11]
Signed-off-by: Theo Debrouwere <Theo.Debrouwere@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline u-boot 2016.09.01
- mainline kernel 4.9
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename orangepipc files, configs, and directories:
- oragepipc_defconfig -> orangepi_pc_defconfig
- board/orangepi/orangepipc -> board/orangepi/orangepi-pc
The purpose of the patch is to improve readability before
adding other boards of orangepi family.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MX6 has a Cortex-A9 core, which supports NEON and VFP.
Add support for them.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The udoo neo files are currently placed inside udoo/neo directory.
Place the mx6qdl udoo related files inside udoo/mx6dl for consistency.
[Peter also update path in readme.txt]
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As console=ttymxc0 is passed in U-Boot we can use /dev/console to
access the serial console and then BR2_TARGET_GENERIC_GETTY_PORT
can be removed.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mx6sx udoo neo boards. For more information about these
boards, please check:
http://www.udoo.org/udoo-neo
The U-Boot and kernel dts patches will be removed when we bump U-Boot
to 2017.01 and kernel to 4.10 version as they have already been sent
upstream.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to kernel 4.9 and remove the wifi dts patch as it is already
part of 4.9.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the kernel to the next commit which fix the build with gcc6.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.11 brings commit 5f95e68daae397 ("clk: imx: fix integer overflow
in AV PLL round rate"), which fixes a PLL calculation bug, so bump to this
version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.8 brings commit 235bde1ed3f0ff ("net: fec: Call swap_buffer()
prior to IP header alignment"), which makes Ethernet functional again
on mx28.
Bump to this version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit changes the kernel version used by the
olimex_a20_olinuxino_lime_mali in order to use a version that builds
fine with gcc 5.x. This kernel repository is listed in
https://linux-sunxi.org/Linux#External_links as a possible replacement
for the aging 3.4 sunxi kernel.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously the vdk solution was using a Linaro kernel that doesn't
build with gcc 5.x.
Since there is no point in using Linaro anymore for this solution,
this patch makes the aarch64 vdk defconfig point to the 4.6 Linux
kernel.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we upgrade U-Boot version to 2016.11 in
"snps_axs101_defconfig" and "snps_axs103_defconfig".
Important fixes: new version fixes U-Boot build for arc700. Since
gcc-6.x "-marc700" option is no longer supported, "-mcpu=arc700"
should be used instead.
We haven't sent it before as we were waiting for U-Boot 2016.11
release.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas: as reported by Alexey, this commit is in fact a bug fix: it
makes the defconfig work properly. Indeed, since the ARC compiler has
moved to gcc 6.x, the ABI has changed, and a Linux 4.8+ kernel is
needed for userspace to work on ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a fragment with configs from retired linux-3.18.config.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select BR2_TARGET_ROOTFS_EXT4 so that an EXT4 rootfs can be generated.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig was mistakenly removed by commit
78ac39cb89 due to an improper conflict
detection in "git am". This commit restores it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sama5d4ek defconfig has been removed in commit
9cb0b37cbd267ec1c2beea3deeaa86846bc2d037, but the board/atmel/readme.txt
file was not updated accordingly. This commit fixes that.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Atmel sama5d4ek board is no longer sold. Since there is the Xplained
board and we won't maintain anymore the EK board, the defconfig can be
removed. In addition, the defconfig was failing to build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to linux4sam_5.5 and remove dtb variants which are no longer
supported. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The calao defconfigs no longer build with gcc 5.x, due to Linux kernel
versions used being too old. However, it is unlikely that anyone will
ever update them, since Calao Systems has gone bankrupt in April 2016.
Therefore, let's remove them. If anyone is interested again at some
point, it will be easy to revive them from the Git history.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch fixes build by GCC 5 (unsupported by the older U-Boot).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the kernel of release 4.1.15_2.0.0_ga, as it builds properly with
gcc 5.x, which is now the default.
We add a linux config fragment to disable the framebuffer, to repair the
build for imx_v6_v7_defconfig.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: adjust syntax in fragment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to have a better hierarchy for the genimage scripts used by
NXP mx25, mx51, mx53, mx6, mx7 SoCs, let's place them inside the
board/freescale/common/imx/ directory.
This helps in creating a more natural separation between the mxs scripts
that are placed inside the board/freescale/common/mxs/ directory.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original submitter and follow-up contributors to the qmx6
defconfig no longer have the hardware available or the time/interest
to update this defconfig, which currently fails to build with gcc
5.x. Due to this, this commit removes this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig no longer builds with gcc 5.x, and the original
submitter, Gustavo, no longer has the hardware to test this
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot KConfig allows to take care of CONFIG_OLD_SUNXI_KERNEL_COMPAT
in order to properly start the kernel (Error: unrecognized/unsupported machine ID)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has not been updated in any significant way since 2011,
when Peter moved it to use a mainline kernel. It's now using an
ancient 3.0 kernel, and a vendor-specific U-Boot version that fails to
build with various "undefined reference" errors:
undefined reference to `show_boot_progress'
undefined reference to `image_print_contents'
undefined reference to `wait_ms'
So it's time to get rid of the defconfig for this platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the common mxs genimage script instead of a custom one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration for the KwikByte KB9202 was added back in July 2008
(commit e27fef5183), and was never
updated since then. It still uses a 2.6.38 kernel, with the out of
tree patches from the former AT91 kernel maintainer. The board has
been discontinued according to its page at
http://www.kwikbyte.com/KB9202.html.
This defconfig no longer builds since the switch to gcc 5.x as the
default. Therefore, it's time to get rid of this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It turns out that linux-4.9-rc3 has all that is needed for the NanoPi
NEO, so use that rather than the franken-kernel I assembled.
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig is affected by bug #8516, reported more than a year ago,
and nobody has updated the defconfig since then. In addition, it should
be migrated to the genimage mechanism instead of having its own
mkcubieboard.sh script.
Therefore, let's get rid of this defconfig.
Fixes bug #8516.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump at91bootstrap to v3.8.7, U-Boot to linux4sam_5.5, Linux to
linux4sam_5.5 (based on v4.4.x).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump at91bootstrap to v3.8.7, U-Boot to linux4sam_5.5, Linux to linux4sam_5.5
(based on v4.4.x).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configs/mx6udoo_defconfig supports the quad and dual-lite variants,
so there is no need to keep udoo_quad_defconfig anymore.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
- quad-core Cortex-A7 @1.2GHz
- 256 or 512MiB of DDR
- uSDCard as only storage option
- 3x USB 2.0 host (one socket, two on expansion pin-holes)
- 1x USB 2.0 OTG (also used as power source)
- 10/100 etehrnet MAC
- GPIOs, SPI, I2c...
Support for the Nanopi NEO in U-Boot and Linux is very recent, so much
so that we have to use an -rc tag for U-Boot and a special Linux tree.
As for Linux, I pushed a git tree on Github with a single tag that
matches what is currently queued in the sunxi-next queued for 4.10,
based on 4.9-rc3. All those commits are from Maxime's tree, the
maintainer for most sunxi stuff.
This also means that we can't use the Linux headers from the kernel
being built (which is what we usually do) because those report 4.9,
while Buildroot currently knows only of 4.8 at best. So this is what we
use.
Unfortunately, support for the ethernet MAC and the USB OTG are not yet
upstream, but are being actively worked on.
The Nanopi NEO is very similar to the Orangepi PC, so I was able to
scanvenge most of its configuration. ;-)
Thanks Maxime for your help on IRC! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This uses the ev3dev linux extension to compile the ev3dev drivers for
LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a script to create SD card and flash images for LEGO MINDSTORMS
EV3 using the genimage tool.
The default kernel config had to be modified to add support for squashfs
and to add a ram disk.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds U-Boot configuration for LEGO MINDSTORMS EV3. U-Boot has
had support for LEGO MINDSTORMS EV3 since v2016.05.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the standard sdcard.img format that can be directly copied
to the SD card.
Remove the custom create-boot-sd.sh script and update the readme.txt
file accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: further tweaks to readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-Boot to 2016.09.01 and kernel to 4.8.4 version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the common board/freescale/common/post-image.sh script instead of
a custom one.
As the final image binary is called "sdcard.img" update the documentation
accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot configuration for Zynq boards have CONFIG_FIT_SIGNATURE=y,
so they need OpenSSL to be available on the host system. In order to
add OpenSSL to the build this commit adds the
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the relevant defconfigs.
Fixes#9316.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select ext4 as root file system as the genimage config expects ext4 not ext2.
Tested on beaglebone, beagleboneblack and AM335x EVM
[Peter: reworded slightly]
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 doesn't work out of the box because the
u-boot-nand.img support has been removed.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 does build successfully, but we don't have a
board anymore to test it.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel revision used by lego_ev3_defconfig to the latest tag from
ev3dev, as suggested by Peter. This is a 4.4 series kernel, which has the
added benefit of not necessitating a specific gcc to boot.
We need a patch to create an empty drivers/lego/Kconfig file for the build
to succeed though, as the ev3dev kernel normally expects a drivers tree to
be checked out there.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit
0924208839 ("configs/arm_juno: use 4.6
mainline kernel"), we're using a mainline kernel for the ARM Juno
board. But we're still fetching it from a Git repository, which is not
really efficient, so let's switch to use a tarball instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration allows out-of-the box Digilent Zybo
support. It uses mainline U-boot and Linux kernel.
This configuration generates a SD card image named sdcard.img.
[Peter: rename genimage.cfg, cleanup post-image script, enable VFP support,
use 4.6 kernel headers and add tools needed by genimage]
Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a target configuration for the beaglebone that supports the SGX530
graphics acceleration and builds the qt5 demos with the eglfs backend.
The imagination technologies demos and fbv are also included. The Linux
kernel is based on the omap2plus defconfig, a config fragment adds the
required settings for SGX accelerator support.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the target config for the beaglebone based on the
AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk.
Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone,
am335x-boneblack will be built and a sd card image is created with a
post-image script. The kernel and driver versions match the
ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm
revisions (1 bit sd card) and JTAG debugging.
Kernel JTAG patch: By default the kernel will disable the JTAG clock,
access via the JTAG port will not work after the kernel booted. The
AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock
alive.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: remove 1-bit MMC patch, it's causing a significant performance
regression for users of BeagleBone, which are 99.99% of the users of
this defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the recent addition of the vexpress-firmware and
arm-trusted-firmware packages, this commit improves the ARM Juno
defconfig to also build a bootloader.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Useful for testing no-MMU ARM code in Qemu.
The newer Linux kernels with DT support for Qemu Versatile aren't yet
working, so use latest 4.4 kernel.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
following commit 7de5b0d2d8, bump kernel
headers to 3.14.79 to match the kernel version.
We cannot use BR2_KERNEL_HEADERS_AS_KERNEL as some of their kernel
modifications causes glibc to fail to build.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop m68k-mcf5208 kernel patch since it's upstream.
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.8.1 2.6.0 YES OK (3)
arm_versatile 4.8.1 2.5.0 YES OK
arm_vexpress 4.8.1 2.5.0 YES OK
m68k_mcf5208 4.8.1 2.5.0 YES OK
m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK
microblazebe 4.8.1 2.5.0 YES OK
microblazeel 4.8.1 2.5.0 YES OK
mips32r2el_malta 4.8.1 2.5.0 YES OK
mips32r2_malta 4.8.1 2.5.0 YES OK
mips32r6el_malta 4.8.1 2.6.0 YES OK (3)
mips32r6_malta 4.8.1 2.6.0 YES OK (3)
mips64el_malta 4.8.1 2.5.0 YES OK
mips64_malta 4.8.1 2.5.0 YES OK
mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4)
mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4)
ppc_g3beige 4.8.1 2.5.0 YES OK
ppc_mpc8544ds 4.8.1 2.5.0 YES OK
ppc_virtex_ml507 4.8.1 2.5.0 NO OK
ppc64_pseries 4.8.1 2.5.0 YES OK
sh4 4.8.1 2.5.0 YES OK
sh4eb 4.8.1 2.5.0 NO (1) OK
sparc_ss10 4.8.1 2.5.0 YES OK
sparc64_sun4u 4.8.1 2.5.0 YES OK
sparc_sun4u 4.8.1 2.5.0 YES OK
x86 4.8.1 2.5.0 YES OK
x86_64 4.8.1 2.5.0 YES OK
xtensa_lx60 4.8.1 2.6.0 YES OK
xtensa_lx60_nommu 4.8.1 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the initial support for mx6q/dl udoo boards.
For information about these boards, please visit:
http://www.udoo.org/
In linux.fragment we disable USB support for now because kernel 4.8
hangs on udoo board.
This is been addressed by Peter Chen's kernel patch series that provides
a standard way to reset a USB hub.
When such series hit mainline, then we can bump the kernel and remove
linux.fragment.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot 2016.09.01 is a bugfix release, so bump to this version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
odroidc2's kernel remains based on 3.14. This commit upgrades the kernel
to a new commit that is now based on 3.14.79, and contains a number of
ODroidC2 related bug fixes and feature additions.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
due to an issue with odroid's u-boot, compiling u-boot with
gcc 5.x will result in a non booting image.
so a gcc 4.9.x compiler must be used.
this solve bug #9326
thanks to Erico Nunes <nunes.erico@gmail.com> for pointing
to the right issue.
Reported-by: <gahabana@mail.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the final kernel 4.8 has been released, let's use it
instead of 4.8-rc5.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using the common board/freescale/common/post-image.sh can lead
to some good amount of simplification.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot 2016.09.01 is a bugfix release, so bump to this version.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot 2016.09.01 is a bugfix release, so bump to this version.
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support
Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016.09.01 is a bugfix release, so bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- configs/acmesystems_aria_g25_128mb_defconfig,
configs/acmesystems_aria_g25_256mb_defconfig :
update default configuration files for both 128MB and 256MB version
- board/acmesystems/aria-g25/genimage.cfg
board/acmesystems/aria-g25/post-image.sh :
add support for genimage in order to build sdcard.img
- board/acmesystems/aria-g25/readme.txt : update documentation
for Aria G25 and add notes about how to build sdcard.img
Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warp7 has a BRCM43430 Wifi chipset. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- enable BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS in raspberrypi3_defconfig
- add copy of rpi-firmware/overlays directory to boot partition in genimage-raspberrypi3.cfg
- enhance post-image.sh script to add 'dtoverlay=pi3-miniuart-bt' on request
- add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay" in raspberrypi3_defconfig
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The TS-4900 uses a custom Linux 4.X from Technologic Systems:
https://github.com/embeddedarm/linux-3.10.17-imx6/tree/imx_4.1.15_1.0.0_ga
Indeed, it is not supported by mainline Linux but this work is ongoing.
This patch is inspired by a previous work for the TS-4800.
A post image script is provided to generate an image that can be
directly written to an SD card. It also adds an fpga wifi module.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we use a mainline kernel for wandboard, we no longer
need to select BR2_LINUX_KERNEL_CUSTOM_GIT, so remove it.
This fixes the following warning:
make wandboard_defconfig
/configs/wandboard_defconfig:19:warning: override: BR2_LINUX_KERNEL_CUSTOM_VERSION changes choice state
#
# configuration written to /home/fabio/buildroot/.config
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's now an sun8i-h3-orangepi-pc dts, so we can use that and drop the
hack in the post-image script.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Among others, this adds support for the ethernet interface.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With kernel 4.8-rc5 we no longer need to use the "CONFIG_SMP=n" workaround
as the reboot issue has been fixed upstream by commit 059e232089e4
("irqchip/gic: Allow self-SGIs for SMP on UP configurations")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
warp7 is well supported in mainline U-Boot 2016.09, so switch
to this version.
As the current supported kernel is based on a 4.1 kernel from NXP,
use the "warp7_secure" U-Boot target as NXP kernel needs to boot
in secure mode.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot, with the default environment, is looking for a zImage.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot, with the default environment, is looking for a zImage.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Generate an sdcard image based on the common Freescale genimage
template.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd,
imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for
the sdcard image generation.
This commit:
* Removes board/freescale/create-boot-sd.sh
* Uses the common Freescale genimage template instead.
The offset of the first partition was 1MB in the script and is
modified to 8MB in the template.
* Fixes the readme.txt file accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
genimage.cfg.template because they all use the same layout. The only
difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.
Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.
With this method the uboot-env.txt file is no longer needed, so it is
removed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Wandboard is well supported in the mainline kernel, so let's switch
from the 3.14 vendor kernel to 4.7.3 mainline kernel version.
As mainline use more dts files to support both B1 and C1 versions of the
board, adjust the dts entries accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches the galileo_defconfig to use the orignal Linux
kernel repo, which was used prior to commit
fc8cac962b.
Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for warp7, which is a board based on NXP i.MX7S processor.
More information about warp7 can be found at:
https://www.element14.com/community/docs/DOC-79058
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the kernel for Galileo board BSP from 3.8 to 3.14.
Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent U-Boot adopts Kconfig for its configuration system.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adding the '-m4' device tree blobs which allow to disable the
peripherals that are used by the Cortex-M4.
The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled
u-boot variable is set to 1.
The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here:
https://github.com/boundarydevices/freertos-boundary
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
- bump u-boot version to 2016.07
- "snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
Also we delete "snps_hs38_vdk_defconfig" as we doesn't support
uni-processor HS38 configuration for vdk any longer.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imx6ulpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.
The dts patch has already been sent to the linux-arm-kernel list
and we can remove it once it reaches a mainline kernel (in
version 4.9 probably).
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the wireless packages be selected by default to make the
usage of Wifi a bit simpler.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. It includes proper ps7_init_gpl.c/h
in it, so builds working SPL without any manual intervention.
BR2_TARGET_UBOOT_BOARD_NAME should be changed to zynq_zc706 since
U-Boot now has separate defconfig files for ZC702 and ZC706 boards.
BR2_TARGET_UBOOT_SPL_NAME should be changed to spl/boot.bin since
the Zynq image support for the mkimage tool was upstreamed and it
now generates boot.bin under spl/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. To sync with the Zedboard updates,
switch over to the Xilinx GitHub repository.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline.
Commit 46d6a561be ("zedboard: Generate BOOT.BIN automatically")
switched from the Xilinx GitHub repository to the U-Boot mainline,
but this commit gets it back to the Xilinx GitHub repository for the
following reasons:
- This defconfig still relies on the Xilinx's local repository for
the kernel. The vendor does the best test for the combination of
U-Boot and the kernel with the same release tag (xilinx-v2016.2
in this case).
- At the time of commit 46d6a561be, the u-boot-xlnx still needed
manual copy of ps7_init(_gpl).c/h in order to build a working SPL
image. So, the mainline U-Boot had advantage in that point of
time. However, the improvement in the mainline U-Boot was merged
into the u-boot-xlnx at the xilinx-v2015.3 release. Now, the
mainline and the u-boot-xlnx are even in this point of view.
- The mainline U-Boot defaults to boot FIT, so something must be
done; either patch environments around with a local patch to
switch to uImage booting (current solution), or build an FIT
with a post build script (chromebook snow does this). On the
other hand, the Xilinx repository defaults to uImage booting,
so it is straightforward, and needs no addition care.
This commit does:
- Switch to the Xilinx custom git repository, and stick to the
xilinx-v2016.2 tag.
- Delete the local patch board/avnet/zedboard/uboot/0001...
since the Xilinx custom repository can boot uImage by default.
- Enable BR2_TARGET_UBOOT_FORMAT_IMG instead of ..._FORMAT_DTB_IMG
since all the Zynq boards in U-Boot enable CONFIG_OF_EMBED.
- Replace BR2_TARGET_UBOOT_ZYNQ_IMAGE with BR2_TARGET_UBOOT_SPL_NAME
since U-Boot can natively generate the Zynq boot image now. The
Zynq image support for mkimage tool was upstreamed at v2016.01
(so xilinx-v2016.1 as well), so no additional tool is needed
any more.
- Update readme.txt
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.7 2.6.0 YES OK (3)
arm_versatile 4.7 2.5.0 YES OK
arm_vexpress 4.7 2.5.0 YES OK
m68k_mcf5208 4.7 2.5.0 YES OK
m68k_q800 4.7 q800-v2.4.0 NO (2) OK
microblazebe 4.7 2.5.0 YES OK
microblazeel 4.7 2.5.0 YES OK
mips32r2el_malta 4.7 2.5.0 YES OK
mips32r2_malta 4.7 2.5.0 YES OK
mips32r6el_malta 4.7 2.6.0 YES OK (3)
mips32r6_malta 4.7 2.6.0 YES OK (3)
mips64el_malta 4.7 2.5.0 YES OK
mips64_malta 4.7 2.5.0 YES OK
mips64r6el_malta 4.7 2.6.0 YES OK (3)
mips64r6_malta 4.7 2.6.0 YES OK (3)
ppc_g3beige 4.7 2.5.0 YES OK
ppc_mpc8544ds 4.7 2.5.0 YES OK
ppc_virtex_ml507 4.7 2.5.0 NO OK
ppc64_pseries 4.7 2.5.0 YES OK
sh4 4.7 2.5.0 YES OK
sh4eb 4.7 2.5.0 NO (1) OK
sparc_ss10 4.7 2.5.0 YES OK
sparc64_sun4u 4.7 2.5.0 YES OK
sparc_sun4u 4.7 2.5.0 YES OK
x86 4.7 2.5.0 YES OK
x86_64 4.7 2.5.0 YES OK
xtensa_lx60 4.7 2.6.0 YES OK
xtensa_lx60_nommu 4.7 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently warpboard uses a 4.0.5 kernel version from github.
Move to version 4.4.15, which is a long term supported kernel version.
With 4.4.15 we no longer need the extra two kernel patches as they have
already been upstreamed.
Use a linux fragment file, so that wireless can be functional by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generate an sdcard.img image to make it easier the deployment of a
Buildroot image.
[Peter: drop unneeded exit statement in post-image script]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Technexion's i.MX6UL Pico board running U-boot 2016.07
and kernel 4.7.
For information about this board, please visit:
http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
System on Modules product featuring a Freescale P1020 CPU,
optionally populated with 1 or 2 Gig-Ethernet PHYs,
DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot 2016.07 works well on warpboard, so bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig file for at91bootstrap was false:
s/sama5d4_xplainedsnf_uboot_secure/sama5d4_xplainednf_uboot_secure.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The TS-4800 is supported by mainline Linux as of 4.5 and by U-boot
as of v2016-07.
The package requires the custom ts4800-mbrboot routine.
A post-image script is provided to generate an image that can be
directly written to an SD card.
More details on the board here:
http://wiki.embeddedarm.com/wiki/TS-4800
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes it possible to clone git repositories hosted on Github while
behind a firewall.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've merged nodm, the autologin display manager, we can
get rid of xinit, and startx hack and use nodm to start X on boot.
While here, let's start xterm and glmark2, just as demos.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No significant changes but 4.6.3 moved parts of the device tree
into a different file, so dts patch must be updated.
[Peter: explicitly configure kernel headers for 4.6]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Chromebook Snow (Samsung XE303C12) is an Exynos 5 board with
a keyboard, an 11 inch screen and a battery attached.
It is relatively developer-friendly and can run mainline Linux
kernels with little to no effort.
There is barely anything special about this target as far as toolchain
is concerned, but its bootloader only accepts signed kernel images
in a Chromium OS specific format, and is not controllable otherwise.
This config provides a script for building the proper kernel blobs,
and a short manual for booting Buildroot images on this device.
In-tree exynos_defconfig is used for the kernel, with a fragment
to change mwifiex into a module. When built statically, mwifiex
attempts to load its firmware before rootfs is mounted and fails.
[Peter: use BR2_KERNEL_HEADERS_AS_KERNEL=y, lock kernel version,
enable fit support in u-boot mkimage]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The console problem goes away with qemu 2.6.0 so it seems it's now a
requirement, update readme.txt accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To match it's friendly qemu counterpart.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to keep them in sync with the new configs, and avoid shipping a
vulnerable kernel.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following what's done in Raspberry Pi's defconfigs, let's
unify the consoles in Minnowboard Max defconfigs, providing
consoles on HDMI and serial port.
[Peter: use tty1 like on rpi]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change. The git hash used is actually just the 2015.07
release, so use the release tarball instead of git. Likewise, we have a
dedicated option for u-boot.img, so use that instead of the custom format.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite often these days Git ports are blocked by firewalls
[this is especially true in corporate environment] so switching
to common HTTP(s) is a safe and pretty convenient move.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Stephan Hoffmann <sho@relinux.de>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is a 1.1.0_ga release, and a 1.1.1_patch release. The
patch release appears to be only for i.MX6UL, so it is bumped
to 1.1.1_patch, while the other are 1.1.0_ga.
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This development defconfig provides tools to test features of the SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This development defconfig provides tools to test features of the SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This development defconfig provides tools to test features of the SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This development defconfig provides tools to test features of the SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This development defconfig provides tools to test features of the SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add basic support for LinkSprite pcDuino board series
including pcDuino, pcDuino-Lite, pcDuino-Lite-WiFi.
Tested on pcDuino-Lite-WiFi.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.6.2 contains commit 63d0430f991314 ("drm/imx: Match
imx-ipuv3-crtc components using device node in platform data")
that fixes IPUv3 probing, so bump to this kernel version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.6.2 contains commit 63d0430f991314 ("drm/imx: Match
imx-ipuv3-crtc components using device node in platform data")
that fixes IPUv3 probing, so bump to this kernel version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for i.MX25 PDK board using U-boot 2016.05 and
kernel 4.6.1.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new configuration for NXP i.MX51 EVK based on U-boot 2016.05
and kernel 4.6.1.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5.6 2.5.0 YES OK (4)
arm_versatile 4.6.1 2.5.0 YES OK
arm_vexpress 4.6.1 2.5.0 YES OK
m68k_mcf5208 4.6.1 2.5.0 YES OK
m68k_q800 4.6.1 q800-v2.4.0 NO (3) OK
microblazebe 4.6.1 2.5.0 YES OK
microblazeel 4.6.1 2.5.0 YES OK
mips64el_malta 4.6.1 2.5.0 YES OK
mips64_malta 4.6.1 2.5.0 YES OK
mipsel_malta 4.6.1 2.5.0 YES OK
mips_malta 4.6.1 2.5.0 YES OK
ppc_g3beige 4.6.1 2.5.0 YES OK
ppc_mpc8544ds 4.6.1 2.5.0 YES OK
ppc_virtex_ml507 4.6.1 2.5.0 NO OK
ppc64_pseries 4.6.1 2.5.0 YES OK
sh4 4.6.1 2.5.0 YES OK
sh4eb 4.6.1 2.5.0 NO (1) OK
sparc_ss10 4.6.1 2.5.0 YES OK
sparc64_sun4u 4.6.1 2.5.0 YES OK
sparc_sun4u 4.6.1 2.5.0 YES OK
x86 4.6.1 2.5.0 YES OK
x86_64 4.6.1 2.5.0 YES OK
xtensa_lx60 4.6.1 2.6.0 YES OK (2)
xtensa_lx60_nommu 4.6.1 2.6.0 YES OK (2)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - Linux 4.5/4.6 doesn't work with older Qemu versions
(3) - There's a network interface, but enabling it in qemu fails
(4) - Console looks dead in 4.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently selected version of U-Boot fails to compile.
Dying words are:
gcc -g -O2 -I/home/zeta/buildroot/buildroot/output/host/usr/include -c -o env_embedded.o /home/zeta/buildroot/buildroot/output/build/uboot-2013.10/common/env_embedded.c
/home/zeta/buildroot/buildroot/output/build/uboot-2013.10/lib/crc32.c:14:20: fatal error: common.h: No such file or directory
compilation terminated.
Makefile:258: recipe for target 'crc32.o' failed
Since it's quite old, instead of trying to fix it, let's
just upgrade.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas: added host dosfstools to the defconfig, needed to build a SD
card image with genimage when a FAT partition is listed in the
genimage configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also, rebase kernel config and adapt kernel command line in grub config file
to follow mmc numbering change.
[Peter: drop now unused linux-4.4.config]
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add two new sample defconfigs oriented towards real PC targets.
It adds two variants for BIOS and EFI boot strategy.
On the build side we enable eudev to autoload relevant kernel
modules/support when necessary.
It adds a bunch of drivers and extra filesystem support which is by no
means extensive/complete, mostly geared towards the hardware i've got at
hand to test with.
This is accomplished by adding on top of the Qemu x86_64 kernel sample
config.
Build connman since by using eudev network interfaces get renamed on
boot thus complicating any form of automatic and friendly bringup.
It also makes Wi-Fi configuration/support easier.
In principle these base defconfigs should work just fine for other
storage media != pendrive like sata or ssd disk, however driver support
isn't there quite yet, and pendrive is mostly supported by usb storage
plus the usual usb host controller drivers.
Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're not necessary and look bad.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for EXT4 filesystem.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-boot to the 2016.05 version and the kernel to 4.6.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 5c67cb1d04 ("linux: use zImage by default on ARM") changed
the default kernel image, but missed to update Zynq defconfigs.
U-Boot on Zynq boards still loads uImage, so BR2_LINUX_KERNEL_UIMAGE
should be defined to generate uImage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add basic support for the roseapple pi board, a SBC in a RPI form factor
with an Actions Semiconductor S500 SoC. For details, see:
http://roseapplepi.org/
The vendor kernel unfortunately needs a minor patch to build the XHCI
driver, so include it here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable kernel drivers for networking and add a simple
busybox config with basic network tools.
Add kernel patch from Linux git to fix hush segfaults while
using signal handler.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should better use the final U-boot version rather than the release
candidate one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the rpi-0, which is basically a rpi (model A+) in a
smaller form-factor.
This one does not have an ethernet port, so we just remove it from the
configuration (or we could use the existing rasbperrypi_defconfig and
suffer from a longer boot time because of the waiting for eth0).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Extend the filesystem type to ext4.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The used U-Boot version (2014.01) isn't too happy with newer (>= 2.25)
binutils versions, so keep it locked down until the config is updated
for a newer version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The used U-Boot version (2014.04) isn't too happy with newer (>= 2.25)
binutils versions, so keep it locked down until the config is updated
for a newer version.
U-Boot 2016.03 in fact does work for mpc8315erdb - however it doesn't
yet support SPL which is necessary for NAND boot and would be a massive
defconfig revamp switching to NOR.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Results table:
Defconfig Kernel Qemu Network Status
------------------------------------------------------------------
aarch64_virt 4.5.3 2.5.0 YES OK
arm_versatile 4.5.3 2.5.0 YES OK
arm_vexpress 4.5.3 2.5.0 YES OK
m68k_mcf5208 4.5.3 2.5.0 NO SO-SO (3)
m68k_q800 4.5.3 q800-v2.4.0 NO (4) OK
microblazebe 4.5.3 2.5.0 YES OK
microblazeel 4.5.3 2.5.0 YES OK
mips64el_malta 4.5.3 2.5.0 YES OK
mips64_malta 4.5.3 2.5.0 YES OK
mipsel_malta 4.5.3 2.5.0 YES OK
mips_malta 4.5.3 2.5.0 YES OK
ppc_g3beige 4.5.3 2.5.0 YES OK
ppc_mpc8544ds 4.5.3 2.5.0 YES OK
ppc_virtex_ml507 4.5.3 2.5.0 NO OK
ppc64_pseries 4.5.3 2.5.0 YES OK
sh4 4.5.3 2.5.0 YES OK
sh4eb 4.5.3 2.5.0 NO (1) OK
sparc_ss10 4.5.3 2.5.0 YES OK
sparc64_sun4u 4.5.3 2.5.0 YES OK
sparc_sun4u 4.5.3 2.5.0 YES OK
x86 4.5.3 2.5.0 YES OK
x86_64 4.5.3 2.5.0 YES OK
xtensa_lx60 4.4.9 2.5.0 YES (2) OK
xtensa_lx60_nommu 4.4.9 2.5.0 YES (2) OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5
(3) - It boots, you can login, but apps exit/crash often
(4) - There's a network interface, but enabling it in qemu fails
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for ARM was changed to zImage in 5c67cb1d, however the
sh4/sh4eb sample configs were updated to switch to uImage in error,
hence end up building uImage which doesn't work with Qemu.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: fix commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far identical to the rpi2 one except for the dts file as the SW runs in
32bit mode.
[Peter: extend commit message]
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 7f1f9185e (system: default to devtmpfs for /dev) changed our default
for /dev handling, but didn't remove the explicit selection of devtmpfs from
a number of defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is
one of the most cost-effective 64bit development boards available in the
ARM world.
http://www.hardkernel.com/main/products/prdt_info.php?g_code=G145457216438
[Peter: fix typos, drop neon/C++ settings, use git hash for Linux/U-Boot]
Signed-off-by: Brian Kim <brian.kim@hardkernel.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump defconfigs relative to Xplained boards to linux4sam_5.3 release. It
involves to use at91bootstrap v3.8.5.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The datasheet indicates vfpv4 but it stands for vfpv4-d16 not vfpv4-32.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.
* The 'openbox' windows manager is chosen because it's simple
and lightweigth.
* Basic X apps are enabled (such as xrandr, xterm), so we
can at least get a console and change video mode.
* ALSA default configuration is provided, so HDMI audio
works out-of-the-box.
* OpenGL is supported.
Tested on Minnoboard Turot (which is Minnowboard Max compatible).
[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.
This commit does the following:
1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
and post-image.sh. These are identical to Minnowboard's.
2) Move Minnowboard MAX's linux config, and rename it.
It would be lovely to have a single kernel config file.
The kernel size penalty involved in adding support for
all the peripherals on both boards is small enough to
justify this.
However, the original Minnowboard has some GPIO buttons
that need to be registered by the kernel. This is not
upstreamed, and hence we need to use the yocto v3.8 kernel
to have this support.
3) Rename each grub config to grub-{board}.cfg.
4) Modify (the now unique) post-build script to use
a different grub config, according to the board.
5) Update both defconfigs, as per the above changes.
6) Finally, update the readme.txt.
[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's rework the board and config files to use genimage
to generate the SD card image directly.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add noMMU configuration running on dc233c MMUv3 core with identity
memory map.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyAMA0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyAMA0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to stm32f429_disco, this commit adds a configuration for the
Cortex-M4 based STM32F469 platform.
It requires a few kernel patches, which have already been submitted
upstream, as well as a small OpenOCD patch. Besides that, it re-uses
most of what has been added for the STM32F429 platform.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squash multiple patches from Lee Jones into one
- improve the readme.txt file
- sync the defconfig with the adaptations made to the stm32f429
configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.
This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:
- A minimal Busybox configuration, which is small enough to boot
without causing OOM on such small noMMU platforms. The resulting
Busybox, statically linked with uClibc-ng, weights around 220
KB. For now, this file is located in board/stmicroelectronics/, but
we might consider moving it to package/busybox/ in the future if
needed.
- A post-build script that removes the mounting of /dev/pts (not
enabled in the kernel and not very useful for a system that has no
network and no X), and removes the network related init script and
configuration files (no network support).
- A flash.sh script, to perform the right OpenOCD invocations to
reflash the board.
- One small kernel patch to adjust the kernel command line in the
Device Tree, since it's the only way to do so.
- The usual readme.txt file.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squashed multiple patches from Lee Jones together
- added the minimal Busybox configuration
- added the post-build script
- improved the flashing script to not hardcode the location of the
output directory
- add the small kernel patch
- improve the readme.txt file
- test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let's rework the board and config files to use genimage
to generate the SD card image directly.
[Peter: add host-mtools for genimage vfat handling]
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These three are Zynq boards and the build procedure is almost the
same. Having the SoC name prefix "zynq_" would be more consistent.
Also, this is the way in which the Linux Device Trees and the U-Boot
configuration files do.
This commit renames as follows:
zedboard_defconfig -> zynq_zed_defconfig
microzed_defconfig -> zynq_microzed_defconfig
xilinx_zc706_defconfig -> zynq_zc706_defconfig
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig allows to build all the components to boot from a sd card on a
SAMA5D2 Xplained board. For more details, please read the
board/atmel/readme.txt file.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variant of SAMA5D4 Xplained defconfig file allows to boot from a SD
card.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: remove host-samba from the package selection, not needed when
booting from SD card.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unify and update the defconfig files for Atmel Xplained boards:
- use at91bootstrap as first stage bootloader instead of u-boot spl
- build all dtb variants
- bump to linux4sam_5.2
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ethernet is not working, but at least you get a shell and
can test applications for m68k.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Notice: We cannot move to u-boot 2016.03 without changing the boot setup as
2016.03 broke legacy boot on omap4.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have modules (including usb/net) loaded automatically, we can
enable dhcp on eth0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The omap2plus kernel defconfig builds most drivers as modules, so we need
(automatic) module loading to be able to use usb/display/..
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
arm_versatile kernel defconfig updated to deal with multi-platform ARM
support and driver changes.
mips(el) 32-bits is back in working order for 4.5
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5 2.3.0 YES OK
arm_versatile 4.5 2.3.0 YES OK
arm_vexpress 4.5 2.3.0 YES OK
microblazebe 4.5 2.3.0 YES OK
microblazeel 4.5 2.3.0 YES OK
mips64el_malta 4.5 2.3.0 YES OK
mips64_malta 4.5 2.3.0 YES OK
mipsel_malta 4.5 2.3.0 YES OK
mips_malta 4.5 2.3.0 YES OK
ppc_g3beige 4.5 2.3.0 YES OK
ppc_mpc8544ds 4.5 2.3.0 YES OK
ppc_virtex_ml507 4.5 2.3.0 NO OK
ppc64_pseries 4.5 2.3.0 YES OK
sh4 4.5 2.3.0 YES OK
sh4eb 4.5 2.3.0 NO (1) OK
sparc_ss10 4.5 2.3.0 YES OK
sparc64_sun4u 4.5 2.3.0 YES OK
sparc_sun4u 4.5 2.3.0 YES OK
x86 4.5 2.3.0 YES OK
x86_64 4.5 2.3.0 YES OK
xtensa_lx60 4.4.5 2.3.0 YES (2) OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5 so stick to 4.4.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* add a post-image.sh script
* update defconfig for genimage
* update readme.txt
[Peter: also add host-dosfstools dependency for vfat partition]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/114650744
git:// access to git.rocketboards.org has been failing for a while, and
git:// is sometimes not allowed through corporate firewalls, so change to
git-over-http instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/114650743
git:// access to git.rocketboards.org has been failing for a while, and
git:// is sometimes not allowed through corporate firewalls, so change to
git-over-http instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mxs-bootlets broke somewhere in between toolchain version bumps, leading to
boot failure.
Directly boot u-boot, as this is supported now, but it requires updated
partitioning (see readme.txt)
Drop mxs-bootlets patches, they aren't needed anymore.
Kernel is built as an uImage because the u-boot defconfig expects an
uImage on the second partition.
Tested on iMX233-OLinuXino-MINI hardware.
[Peter: adjust readme/config as suggested by Arnout]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It didn't make sense to keep the U-Boot scripts and post build/image
scripts under the nitrogen6x folder since they apply for all our
platforms.
Also update the readme.txt to make it clearer which defconfig should
be used depending on the platform targeted.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to the latest kernel with DT path adjustment because Linux
commit ca5b34100c57 ("dts, arm64: Move dts files to vendor subdirs")
moved the DT file to the vendor sub-directory.
This commit was tested with the latest model (FVP v8 Foundation
Platform 9.5 build 41), so I updated the instruction in readme.txt
corresponding to it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
VFPv3 and NEON was enabled and a readme.txt file was added.
Fixes bug #7580.
Tested on Pandaboard ES.
[Peter: use EABIhf]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These defconfig options are set to their default values, so they are
redundant and can be removed without effect.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To allow a more complete "out-of-the-box" startup with the defconfig,
enable automatic network configuration of eth0 using DHCP.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This board is using a different kernel and u-boot branch than the
other Boundary Devices platforms since NXP forked the 3.14 kernel to add
i.MX7 support (see imx_3.14.38_6ul7d_beta branch).
Next kernel version, 3.14.52, will be the same for all i.MX platforms.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 24dfbe71e (arch/arm: do not distinguish revisions of ARM1136JF-S)
removed the r0 variant of the arm1136jf-s, but didn't update the defconfig -
So it ends up using arm926 instead.
Fix it by selecting the correct symbol instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to the issue with the Atmel A5 based boards, the VFP is optional on
A9 - So we need to enable it to be able to use EABIhf.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent changes in Config.in.arm regarding the VFP selection broke the
atmel_sama5d* defconfigs. Ensure EABIhf is selected as all the sama5 have a
vfp.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the two firefly_rk3288 defconfigs recently
added. First we switch to the ARM cortex-A17 core. Second,
we switch the kernel github access from SSH to HTTPS, which
is suitable for anonymous access.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds basic configuration files for the Firefly RK3288 board.
Both minimal and demo defconfigs are added. The latter enables Qt5 with
the required Mali T76X GPU user space components.
More info about the board:
http://en.t-firefly.com/en/firenow/firefly_rk3288/specifications/
[Peter: use same-as-kernel for kernel headers]
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds a minimal working configuration for
Acmesystems Arietta g25.
[Peter: fix whitespace, use same-as-kernel for kernel headers version]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a followup to http://patchwork.ozlabs.org/patch/548550/ fully convert
the versatile defconfig to create the dtb and update the instructions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This config has no prospect of going into the future (by using DTS), and
qemu doesn't do a good job at emulating it (networking problems), so
drop it.
All of the ARM SMP testing duties are now in the vexpress defconfig
which is better suited/supported.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Keep arm_nuri on 3.10.x for the usual reasons.
Keep mips & mipsel (32 bits) on 4.3.x because 4.4.x fails to boot
properly (kernel stuck after the CPU cache info).
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.4.1 2.3.0 YES OK
arm_nuri 3.10.96 2.3.0 YES(1) OK most times(2)
arm_versatile 4.4.1 2.3.0 YES OK
arm_vexpress 4.4.1 2.3.0 YES OK
microblazebe 4.4.1 2.3.0 YES OK
microblazeel 4.4.1 2.3.0 YES OK
mips64el_malta 4.4.1 2.3.0 YES OK
mips64_malta 4.4.1 2.3.0 YES OK
mipsel_malta 4.3.5 2.3.0 YES OK (4)
mips_malta 4.3.5 2.3.0 YES OK (4)
ppc_g3beige 4.4.1 2.3.0 YES OK
ppc_mpc8544ds 4.4.1 2.3.0 YES OK
ppc_virtex_ml507 4.4.1 2.3.0 NO OK
ppc64_pseries 4.4.1 2.3.0 YES OK
sh4 4.4.1 2.3.0 YES OK
sh4eb 4.4.1 2.3.0 NO(3) OK
sparc_ss10 4.4.1 2.3.0 YES OK
sparc64_sun4u 4.4.1 2.3.0 YES OK
sparc_sun4u 4.4.1 2.3.0 YES OK
x86 4.4.1 2.3.0 YES OK
x86_64 4.4.1 2.3.0 YES OK
xtensa_lx60 4.4.1 2.3.0 YES OK
(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 starts it fails to work properly
(3) - Probably an endian issue with 8139 emulation/driver
(4) - Kernel stuck at cpu cache details from 4.4 - 4.4.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For most defconfigs, it was trivial to deduce the kernel version, by
just reading the version string, which could be:
- a standard upstream version string vX.Y.Z
- a non-standard version string, but still containg the standard X.Y.Z
Those for which it was not so trivial were those hosted on git tree.
Since most were already using a custom linux-headers version, it could
be easily deduced from that. It was confirmed by browsing said git trees
and check the version there.
There are a few cases were there was a mismatch:
- microzed: uses a 3.18 kernel, but 3.8 headers; fixed.
- xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed.
- zedboard: uses a 3.18 kernel, but 3.8 headers; fixed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can say that the linux headers version should match that of
the kernel to be built, we inverse the logic in our defconfigs, as it is
more sensible that way.
And also because we'll get rid of the former, converse kernel-same-as-headers
option.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Juno ARM Development Platform (ADP) is a software development
platform for ARMv8-A, it includes the Juno Versatile Express board
and an ARMv8-A reference software port available through Linaro.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to latest boundary-imx_3.14.28_1.0.0_ga commit which brings the
following additions:
- Fix cache functions export when !MULTI_CACHE
https://github.com/Freescale/linux-fslc/commit/6325d57
- Mandatory for Vivante kernel module
- Add TW686x video decoder support
- Fix OV5642 subdev/capture driver conflict
- Add GSLX680 touchscreen support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to be abble to select BR2_ARM_FPU_VFPV3D16, BR2_ARM_ENABLE_VFP
must be selected first.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to be abble to select BR2_ARM_FPU_VFPV3D16, BR2_ARM_ENABLE_VFP
must be selected first.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also updating the documentation with the dd instruction to flash the
bootable media.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: use tarball for Linux kernel, use 4.4 kernel headers]
Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
genimage from the post-image script needs mkdosfs to create fat partition:
>>> Executing post-image script board/orangepi/orangepipc/post-image.sh
sh: 1: mkdosfs: not found
vfat(boot.vfat): failed to generate boot.vfat
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As can be seen at
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/99518455,
the new Orange Pi PC defconfig fails to build due to DTC being missing
when building U-Boot. This commit adds the appropriate option to add
DTC as a dependency to U-Boot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update the raspberrypi and raspberrypi2 configs to use genimage directly
to build the image.
Update the documentation to reflect this, and drop the volatile rootfs
option since it doesn't make much sense and it's not easily integrated
with the genimage configurations.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the Cubieboard2 board defconfig to use newer u-boot
and linux versions, along with a few other improvements.
The other improvements were mostly backported from the recent Orange Pi
defconfig inclusion and are related to image generation.
linux-sunxi.org was used as a reference for both linux and u-boot
defconfig names.
In detail:
- Update linux to vanilla upstream -- currently 4.3.3 is the most
up-to-date. Although it lacks some features present only in the
linux-sunxi 3.4 branch, upstream support appears to be relatively mature
and is already being deployed by default by distributions such as Arch
Linux ARM.
- Update u-boot to vanilla upstream 2015.10. According to
linux-sunxi.org, upstream fully supports major functions (except NAND)
since 2015.07.
- Change image format to zImage and drop custom image generation script
in favour of genimage, as pointed out by reviewers in the Orange Pi
defconfig submission.
This was tested in a Cubieboard2 board with boot from mmc and it boots
fine to login prompt.
This has not been tested in a Cubieboard (A10) as I don't own any; the
version bumps probably apply to it although there are some differences
(lack of VFPv4 support, Cortex-A8 instead of Cortex-A7), so I have kept
the current Cubieboard defconfig and its scripts. This one has been only
build-tested.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a configuration for the Orange Pi PC board,
<http://www.orangepi.org/orangepipc/>.
Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The arm_foundationv8_defconfig currently doesn't build because it uses
an external AArch64 toolchain that has been updated (Linaro toolchain)
and is now based on gcc 5.x. Unfortunately, Linux 3.13 is too old to
be built with gcc 5.x.
As a minimal fix to make this defconfig build again, we switch to use
the internal toolchain backend. At the time this defconfig was
introduced, there was no support for AArch64 in the internal toolchain
backend, but now that it is available, there is no reason to not use
it. This makes the defconfig also more consistent with the other
defconfigs.
Obviously, the kernel headers used to build the toolchain are set to
the fixed version 3.13, so that they match the kernel being used.
While we're at it, the readme.txt file corresponding to this defconfig
is updated. Runtime testing has been performed with the latest version
of the ARM Foundation model.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable dhcp networking for qemu configs considered good enough for
testing purposes.
This excludes:
arm_nuri - emulation doesn't seem 100% correct for networking.
ppc_virtex_ml507 - doesn't emulate networking.
sh4eb - emulation doesn't seem 100% correct for the NIC.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Capitalize comments in a consistent way.
Cleanup redundant entries.
Drop global patch dir for sparc ss10 since it's not required any more.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes:
* Toplevel build root configuration
* Github based 3.8.7 Kernel
* Upstream 3.8.7
* Linux 3.8.7 Kernel Driver Patches
* Linux 3.8.7 configuration
* Grub configuration
* Init Script to load modules
* genimage config to create sdcard image.
[Thomas: simplify post-image script since there is now only one call
to genimage.]
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that uclibc-ng was bumped to version 1.0.9 nothing prevents x86
from working correctly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ppc-mpc8544ds: switch to custom kernel config since the new 4.3-shipped
mpc85xx_basic_defconfig doesn't work with Qemu.
Incidentally while cleaning it up it now seems to work fine with newer
qemu versions.
sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000
driver which works fine.
x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc
(any variant) based toolchains.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.3 2.3.0 YES OK
arm_nuri 3.10.93 2.3.0 NO(1) OK(2)
arm_versatile 4.3 2.3.0 YES OK
arm_vexpress 4.3 2.3.0 YES OK
microblazebe 4.3 2.3.0 YES OK
microblazeel 4.3 2.3.0 YES OK
mips64el_malta 4.3 2.3.0 YES OK
mips64_malta 4.3 2.3.0 YES OK
mipsel_malta 4.3 2.3.0 YES OK
mips_malta 4.3 2.3.0 YES OK
ppc_g3beige 4.3 2.3.0 YES OK
ppc_mpc8544ds 4.3 2.3.0 YES OK
ppc_virtex_ml507 4.3 2.3.0 NO OK
ppc64_pseries 4.3 2.3.0 YES OK
sh4 4.3 2.3.0 YES OK
sh4eb 4.3 2.3.0 NO(1) OK
sparc_ss10 4.3 2.3.0 YES OK
sparc64_sun4u 4.3 2.3.0 YES OK
sparc_sun4u 4.3 2.3.0 YES OK
x86 4.2.6 2.3.0 YES OK(3)
x86_64 4.3 2.3.0 YES OK
xtensa_lx60 4.3 2.3.0 YES OK
(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 runs it fails to start properly
(3) - linux 4.3.0 doesn't like uclibc-based toolchains (net issues)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the integrator926_defconfig configuration, which has not been
updated since a very long time, and targets hardware that is quite
difficult, not to say impossible, to get.
While Qemu has an emulation for the Integrator CP platform, it doesn't
seem to emulate a hard drive, which makes it not very useful. In
addition, we already have the qemu_arm_versatile_defconfig for an
ARMv5 platform emulated in Qemu.
Therefore, let's get rid of this fairly old and never updated
defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has not been updated since a long time, and it now
fails to build because the latest version of U-Boot has removed for
the Snowball because nobody converted it to the new U-Boot
standards. And our defconfig was not specifying an explicit U-Boot
version for it.
On the kernel side, the Git repository has not seen any commits since
3 years, and generally speaking, the Snowball project and the SoC it
is based on are no longer being developed.
Consequently, let's get rid of this defconfig altogether.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX6 SoloX SABRE board for smart devices is Freescale's reference design
board based on the heterogeneous ARM Cortex-A9 + Cortex-M4 i.MX6 SoloX
applications processor.
This defconfig is inspired from previous freescale_imx6*sabresd_defconfig, and
is based on Freescale "official" git repo on git.freescale.com and SW release
3.10.53_1.1.0_ga.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Virtualizer Development Kit (VDK) Family for ARM Cortex Products
consists of a set of virtual prototypes that provide a virtualizer for
the ARM core variants. The VDK is a standalone package that runs on an
host computer.
[Thomas: drop the following options, which as noted by Arnout, are not
needed:
- BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
- BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
- BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y.]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also revamp the kernel config a bit to make it more featured, enabling
SATA ports and storage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use custom version for U-Boot, instead of using the default value as defined
in BR2_TARGET_UBOOT_VERSION.
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes:
* Update Kernel and U-Boot to the latest 2.0.6 BSP release from the
official sources.
* Add genimage config to create bootable SD card image
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As now using zImage/bootz in the 6x_bootscript.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current commit used for the kernel Git repository for Cubieboard,
274a66a7bfcbaabb88d63e4eba161965383cc416, actually points to 3.0
kernel. This is incorrect since the kernel headers version specified
by the defconfig is 3.4. And anyway, the 3.4 kernel is kind of the
official vendor kernel for Allwinner platforms.
mfld.fr@gmail.com reported in bug #7931 that commit
9a1cd034181af628d4145202289e1993c1687db6 was working for him. It is
the latest commit in the sunxi-3.4 branch. So we switch to using this
commit, which was build tested successfully.
While we're at it, remove the definition of BR2_LINUX_KERNEL_VERSION
from the defconfig: it doesn't make sense to have it defined in a
defconfig, as it's a blind option that gets defined from the value of
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION when a Git repository is used to
source the kernel.
Fixes#7931.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The at91rm9200df_defconfig configuration is really old: it builds a
2.6.38 kernel with the old days kernel patches and a 2010.06
U-Boot. It hasn't been updated since a long time, so let's get rid of
it.
The at91sam9260dfc_defconfig, at91sam9261ek_defconfig and
at91sam9263ek_defconfig refer to kernel defconfigs that no longer
exists, so they fail to build.
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SoC of the Raspberry Pi 1 is an ARM1176JZF-S, which features a VFPv2
FPU, so use the EABIhf target ABI, which is more efficient than EABI.
This is also the default on Raspbian.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-boot version to 2015.07 from the mainline repository. Since there
is SPL support for the wandboard in the U-boot 2015.07, it is now
possible to boot the same U-boot image for all wandboard variants
(solo/dual/quad).
Bump kernel version to 3.14.28_1.0.0 from the wandboard git repository.
Tested on Wandboard Solo, Wandboard Dual and Wandboard Quad.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
defconfigs that use U-Boot 2015.07 need host-dtc to build
properly.
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
olimex_a20_olinuxino_lime_defconfig and zedboard_defconfig use U-Boot
2015.07, and they need host-dtc to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Barebox, AT91Bootstrap and Linux patches for the Calao QIL A9260
board are all located in the same directory, board/calao/qil-a9260/,
with only a prefix to indicate to which component they apply.
Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR for all of Barebox, AT91Bootstrap and Linux
patches.
In addition, the defconfig was not specifying explicitly which Barebox
version to use, so right now it's trying to use Barebox 2015.09, on
which the board-specific patch does not apply. So we've forced to use
Barebox 2012.08, which was the lastest release available at the time
the defconfig was initially contributed.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Both the Barebox and AT91Bootstrap patches for the Calao USB A9G20
board are located in the same directory, board/calao/usb-a9g20-lpw/,
with only a prefix making a difference between whether they apply to
Barebox or AT91Bootstrap.
Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to fetch its kernel source code and U-Boot source
code from gitorious.org, which is not longer available. Therefore,
this defconfig has been failing to build since quite some time. Since
there's no obvious other place to grab the kernel and u-boot source
code, and the defconfig was not updated since a long time, let's
simply get rid of it.
[Peter: also drop README]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Virtualizer Development Kits (VDKs) are software development kits
containing design-specific virtual prototypes as well as debug and
analysis tools and sample software.
With this change we add support for VDK based on ARC HS38 core.
Note that FS-overlay is required to allow instantiation of console on
both serial port and LCD screen simultaneously.
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline
kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps.
[Thomas: remove ccache and optimize 2 options.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux kernel 4.2 was finally released, so bumping from 4.2-rc5 to
final release.
Updating Linux headers to 4.2 branch since they are introduced in
Buildroot as well already.
Also adding 1 back-ported patch that makes SD/MMC cards usable on AXS
boards. This patch will be a part of 4.3 (already in linux-next) and
hopefully will make its way in 4.2.1.
Once that patch appears in 4.2.x it can be removed from here.
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot version is updated to v2015.07.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This board is using the exact same kernel and u-boot revision as the
Nitrogen6x. They also share the same u-boot "autoboot" script.
The differences between the two configurations are:
- getty port is ttymxc0 instead of ttymxc1
- uImage load address is 0x80008000
- different device tree
http://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes are based on Zedboard: Xilinx does not provide a specific DTS
for Microzed in the kernel tree. It is suggested [1] to use the
zynq-zed.dts and change the RAM size
[1] https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856
[Thomas:
- extend readme.txt to indicate why the same DTB is used for Microzed
and the Zedboard.
- add a description + Signed-off-by line in the
0001-zynq-Create-microzed-specific-U-Boot-environment.patch, by
re-using the description of the same patch for the Zedboard.]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David du Colombier <0intro@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David du Colombier <0intro@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AXS10x Platform consists of a DesignWare AXC001 CPU
Card (with ARC 770D core) in case of AXS101 or AXC003 CPU Card
(typically with ARC HS38 core) in case of AXS103 mounted on an
ARC Software Development Platform Mainboard with DesignWare peripherals:
* SD/MMC contoller
* Gigabit network contoller
* Serial ports (8250-compatible)
* USB 2.0
* SPI
* I2C
It also houses HDMI output for external monitor connection.
For stand-alone usage of the board (with only keyboard, mouse and montor
attached) kernel console and getty made available on tty0 as well as on
serial port (ttyS3).
Note there're 2 prerequisites:
[1] u-boot: 2015.07 - fix creation of .config
http://patchwork.ozlabs.org/patch/502558/
[2] binutils: fix buildng of Linux kernel for ARCv2 ISA
http://patchwork.ozlabs.org/patch/503550/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot v2015.07 is required for successful out-of-the-box
build for common Xilinx Zynq boards (including Zedboard).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a Xilinx Zynq (xc7z045) development board, based on Xilinx Zynq
(xc7z045).
This support is based on Avnet Zedboard defconfig/readme.
[Thomas:
- minor fixes in the readme.txt
- rename defconfig from zc706_defconfig to xilinx_zc706_defconfig.]
Signed-off-by: Jordi Montagne <jordi.montagne66@gmail.com>
Tested-by: Jean Burgat <jeanburgat33@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes the U-Boot's default environment to
boot Zedboard out-of-the-box from SD card.
The sdboot procedure tries to load a file system.bit into
the Zynq's PL (only if it exists). It is also possible to
alter the booting by an uEnv.txt file located on your SD card.
The uEnv.txt is a plain text file with <key>=<value> pairs
one per line.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot v2015.07 builds working SPL without a manual
intervention. The BOOT.BIN is generated from the standard
SPL so no BR2_TARGET_UBOOT_SPL_NAME redefinition is needed.
The SPL requires the u-boot-dtb.img file to boot properly.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a genimage config file and a post-image script for the
Wandboard, to generate a medium image "sdcard.img", ready to be booted.
The image contains the layout explained in the board readme.txt file:
U-Boot, its environment, and an Ext2 rootfs partition.
The defconfig has been slightly changed to enable this feature. Also
lighten the readme file since the config file is documented and simpler.
Tested on a Wandboard Solo.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: change the name of the tmp dir, and remove it before using
it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is largely the same as altera_sockit_defconfig.
It uses a fresher Linux and u-boot than SocKit. It also speeds the
serial port up to 115200.
The post-image script is generalized by adding
BR2_ROOTFS_POST_SCRIPT_ARGS and moving it up the altera directory.
Similarly, the readme is moved up and made more generic.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those scripts are executed by u-boot in order to detect the hardware
configuration (board, displays etc...), configure the bootargs and
device tree accordingly or update the bootloader located in NOR flash.
This update is necessary due to the kernel bump to version 3.10.53.
The rework consists of replacing the binaries by their text file
equivalent and generate the binaries from the post-build.sh script.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also update the dtb files to be generated.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a set of patch to add support for warpboard
(Freescale board based on imx6sl)
The patch contains :
- defconfig for warpboard
- linux patches from Fabio Estevam to fix device tree due to last change on
warpboard schematics (rev 1.12) and to fix kernel imx_v6_v7 defconfig which
use incorrect hci protocol
- specific firmware file for warpboard bluetooth
nvram : brcmfmac4330-sdio.txt
Origin of nvram config file for wifi :
https://github.com/Freescale/meta-fsl-arm-extra
[Thomas: misc rewording/improvements in the README file.]
Signed-off-by: Arthur LAMBERT <arthur@dreem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a defconfig for the Olimex A20-OLinuXino-Micro board, reusing most
of the A20-OLinuXino-Lime files.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The files in board/olimex/a20_olinuxino_lime/ work with minimal or no
modifications for the Olimex A20-OLinuXino-Micro board, whose support is
going to be added in a later commit.
Rename the directory to clarify it's not restricted to the Lime anymore.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency, rename atmel_xplained_defconfig to
atmel_sama5d3_xplained_mmc_defconfig as this configuration supports
booting the sama5d3 Xplained with an MMC card (as opposed to the NAND
flash).
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This supports:
- sama5d31ek
- sama5d33ek
- sama5d34ek
- sama5d35ek
- sama5d36ek
with or without the PDA4 or PDA7 screens.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use kernel (3.18) and u-boot (2015.01) from Atmel's repositories.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we no longer have a non-DT defconfig, and we no longer want to
advertise such a possibility (non-DT is being phased out), just rename
the DT-enabled defconfig file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The RPi is slowly but surely dropping support for booting without a DTB,
so just ditch our old defconfig now that we have up-to-date DT-enabled
defconfigs for all RPi models (save for the compute module).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version (4.0.y); build an in-tree DTB.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version; build an in-tree DTB; use
a in-tree defconfig; enable C++ (to match what we have in the non-DT
variant); do not install DTB overlays (this minimalist config does not
make use of them).
Generate the DTBs for both the "original" variant (A and B) and the
"Plus" variant (A+ and B+).
Drop our custom linux defconfig file now we use an in-tree one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 3.4.x vendor specific kernel, which allows to use
the Mali 3D acceleration for OpenGL support.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 4.x mainline kernel.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update most of the configs to the latest kernel version (4.1) except for
arm-nuri which is stuck.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#8186
Mkfs.jffs2 accepts a --pagesize parameter, which allows specifying the size
of the virtual memory page size of the target machine, where the image will
be used. (This is the value of the PAGE_SIZE macro in Linux.) In most cases
the parameter doesn't need to be set as the default value of 4 kB is usually
correct.
The parameter was used incorrectly in Buildroot -- it was set to the page
size of flash memory chip -- this commit fixes this problem. Now the
--pagesize parameter is not used at all (unless the user explicitly chooses
to use a custom value during configuration). All existing defconfigs were
corrected to match the new configuration variable names.
[Peter: reword, add Config.in.legacy handling]
Signed-off-by: Michał Leśniewski <mlesniew@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The VIA VAB-820 board (and the AMOS-820 system built around it) is
based on Freescale i.MX6 for embedded and industrial computing.
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.
So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.
Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.
Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(ARM and SH4 uClibc toolchain builds)
- Update kernel
- Add u-boot configuration
- 6q_bootscript.txt is no more needed by new version of u-boot
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
[build test only]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This brings the raspberrypi_dt_defconfig up to the same kernel used by
the raspberrypi2_defconfig. Also changed the git URL to use HTTP for
consistency.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This changes the kernel used on the Raspberry Pi 2 from the 3.19 branch
back to the 3.18 branch. This provides a couple of advantages:
1. mmc0 works again. Floris Bos found out that this was due to using
the precompiled DTB files from rpi-firmware. These DTBs were built
using 3.18.
2. The rpi-3.18.y branch is not regularly rebased like rpi-3.19.y
according to popcornmix. See
https://github.com/raspberrypi/linux/issues/915.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain IPv6 option from the only config that's got
it since it's now a non-option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use BR2_TARGET_UBOOT_PATCH now that BR2_TARGET_UBOOT_PATCH_DIR is
deprecated.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Use a custom kernel config to avoid the caveat of a huge debug-enabled
one.
And also reduce defconfig options to avoid bloat.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch kernel config to ext4, simplify to reduce bloat.
Adjust invocation to keep the framebuffer window for graphics testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch to DTB (mandatory).
And adjust invocation to use dtb and add a little more RAM for testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Remove redudant/pointless kernel options to reduce bloat.
Switch from smc9111 to rtl8139 for networking because of issues.
Enable evdev support for better x11 testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It looks like version 23c76b7 of Raspberry kernel does not exist
anymore:
$ git clone https://github.com/raspberrypi/linux.git
[...]
$ cd linux
$ git co 23c76b7f608e51258c6fca02aebeb5d588583149
fatal: reference is not a tree: 23c76b7f608e51258c6fca02aebeb5d588583149
Replace it by latest version of 3.19 branch.
[Thomas: tweak commit log.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS became ineffective in commit a5ce7590c4
(package/rpi-firmware: bump version), and was removed in commit 4e92ffdc47
(rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS).
Remove it from the Pi configs.
Also, remove the now obsolete comment in these config files.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a manually specified custom version 3.19.2 of the linux kernel
for i.MX28, but linux-headers defaults to a 2.6.x family.
Select custom headers family 3.19.x explicitely, to repair
linux-headers "build".
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX28 Evaluation Kit (or EVK) is Freescale's evaluation board based on the
i.MX287 Applications Processor.
This defconfig is based on mainline u-boot and Linux kernel.
Also, we add an SD card creation script and documentation, shamelessly based on
the ones for i.MX5/6 by Luca Ceresoli.
[Arnout: fixate U-Boot and kernel (headers) versions]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SABRE Board for Automotive Infotainment (SABRE Auto, a.k.a. SABRE-AI) is
Freescale's evaluation board based on the i.MX 6 ARM Cortex-A9 applications
processor.
Those defconfigs are an adaptation of freescale_imx6{q,dl}sabresd_defconfig for
SABRE Auto, and are thus based on Freescale "official" git repo on
git.freescale.com and SW release 3.10.17_1.0.0_ga.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rename imx6sabresd board folder to imx6sabre, to prepare for Sabre Auto
addition. Update doc, link and defconfigs accordingly.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Eric Bénard <eric@eukrea.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain non-largefile support option since it's
being removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX31 Product Development Kit (or PDK) is Freescale development board
based on the i.MX31 application processor.
This defconfig is based on mainline kernel v3.15.10, and is aimed at a PDK in
"3 stack" configuration, with CPU engine board, personality board and debug
board.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a small development board, based on Freescale IMX6 Solo SoC
(single core ARM Cortex-A9). The board has excellent support in mainline
U-Boot and Linux.
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update configuration to use the 3.18.8 kernel and update U-Boot to
2015.01. With the switch to 2015.01. use the U-Boot SPL image for the
first stage bootloader instead of the at91bootstrap. The U-Boot SPL
requires that the U-Boot image format be u-boot.img in order to load
from the SD card.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for BR2_KERNEL_HEADERS_3_17 deprecation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's not required, the toolchain options should handle that.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qemu_arm_vexpress_defconfig is broken for 3.19 so keep it with 3.18.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lock to 3.18 headers; add comment about installing DTBs;
bump kernel sha1.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lock to 3.19 kernel headers; and comment about installing DTBs; bump
kernel sha1.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: James Hebden <james@hebden.net.au>
[yann.morin.1998@free.fr: fix commit log; further bump]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Guillermo A. Amaral" <g@maral.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sha1 used for the DT enabled kernel is no longer available
(presumably, the rpi-3.18.y branch was rebased recently.) This updates
it to the lastest sha1 in the rpi-3.18.y branch.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added defconfig for UDOO Quad board. Used official (manufacturer) kernel 3.0.35.
Kernel is patched in order to use gcc version 4.8 and above, according to
mailing list at
https://lists.yoctoproject.org/pipermail/meta-freescale/2013-July/003531.html
Bootloader is also downloaded from official (manufacturer) repository.
Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
[ThomasDS: use explicit commits instead of 'master'; clarify source for
kernel and u-boot as 'manufacturer']
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(compile-tested only)
[Thomas P: remove glibc, C++ and mdev selection, added some comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
i.MX6 SoloLite SoC has a different external memory base address
than the other i.MX6 family SoCs:
- 0x80000000 for i.MX6 SoloLite (see i.MX6 SoloLite Reference Manual [1])
- 0x10000000 for the others (see i.MX6Quad/Dual Reference Manual [2])
[1] http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6SLRM.pdf?fasp=1
Table 2-1 System Memory Map, MMDC - DDR Controller
[2] http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf?fasp=1
Table 2-1 System Memory Map, MMDC - DDR Controller
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
