board: Add support for Acmesystems Arietta g25
This patch adds a minimal working configuration for Acmesystems Arietta g25. [Peter: fix whitespace, use same-as-kernel for kernel headers version] Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is contained in:
parent
d9055885e7
commit
e173aeece5
35
board/acmesystems/arietta-g25/genimage.cfg
Normal file
35
board/acmesystems/arietta-g25/genimage.cfg
Normal file
@ -0,0 +1,35 @@
|
||||
# Minimal SD card image for the Acmesystems Arietta G25
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
file zImage {
|
||||
image = "zImage"
|
||||
}
|
||||
|
||||
file acme-arietta.dtb {
|
||||
image = "at91-ariag25.dtb"
|
||||
}
|
||||
|
||||
file boot.bin {
|
||||
image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
|
||||
}
|
||||
}
|
||||
size = 16M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
16
board/acmesystems/arietta-g25/post-image.sh
Executable file
16
board/acmesystems/arietta-g25/post-image.sh
Executable file
@ -0,0 +1,16 @@
|
||||
#!/bin/sh
|
||||
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
|
||||
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
|
||||
|
||||
rm -rf "${GENIMAGE_TMP}"
|
||||
|
||||
genimage \
|
||||
--rootpath "${TARGET_DIR}" \
|
||||
--tmppath "${GENIMAGE_TMP}" \
|
||||
--inputpath "${BINARIES_DIR}" \
|
||||
--outputpath "${BINARIES_DIR}" \
|
||||
--config "${GENIMAGE_CFG}"
|
||||
|
||||
exit $?
|
45
board/acmesystems/arietta-g25/readme.txt
Normal file
45
board/acmesystems/arietta-g25/readme.txt
Normal file
@ -0,0 +1,45 @@
|
||||
Acmesystems Arietta G25
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Arietta G25. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
You can find additional informations, tutorials and a very comprehensive
|
||||
documentation on http://www.acmesystems.it/arietta.
|
||||
|
||||
Build instructions
|
||||
==================
|
||||
|
||||
To build an image for the arietta g25 choose the configuration
|
||||
corresponding to the arietta variant.
|
||||
|
||||
For 128MB RAM variant type:
|
||||
|
||||
$ make acmesystems_arietta_g25_128mb_defconfig
|
||||
|
||||
else for 256MB RAM variant type:
|
||||
|
||||
$ make acmesystems_arietta_g25_256mb_defconfig
|
||||
|
||||
then:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the microSD card
|
||||
=============================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
|
||||
Insert the microSD card into the arietta slot and power it.
|
||||
|
||||
The image just built is fairly basic and the only output
|
||||
you will get is on serial console, please consider to use a DPI
|
||||
cable (http://www.acmesystems.it/DPI)
|
31
configs/acmesystems_arietta_g25_128mb_defconfig
Normal file
31
configs/acmesystems_arietta_g25_128mb_defconfig
Normal file
@ -0,0 +1,31 @@
|
||||
# Architecture
|
||||
BR2_arm=y
|
||||
|
||||
# Toolchain
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
|
||||
BR2_LINUX_KERNEL_ZIMAGE=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
|
||||
BR2_LINUX_KERNEL_XZ=y
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_AT91BOOTSTRAP3=y
|
||||
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
|
||||
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
|
||||
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
|
||||
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
|
||||
|
||||
# Image
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
31
configs/acmesystems_arietta_g25_256mb_defconfig
Normal file
31
configs/acmesystems_arietta_g25_256mb_defconfig
Normal file
@ -0,0 +1,31 @@
|
||||
# Architecture
|
||||
BR2_arm=y
|
||||
|
||||
# Toolchain
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
|
||||
BR2_LINUX_KERNEL_ZIMAGE=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
|
||||
BR2_LINUX_KERNEL_XZ=y
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_AT91BOOTSTRAP3=y
|
||||
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
|
||||
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
|
||||
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
|
||||
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
|
||||
|
||||
# Image
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
Loading…
Reference in New Issue
Block a user