configs/qemu: bump to latest version

Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.7     2.6.0           YES     OK (3)
arm_versatile           4.7     2.5.0           YES     OK
arm_vexpress            4.7     2.5.0           YES     OK
m68k_mcf5208            4.7     2.5.0           YES     OK
m68k_q800               4.7     q800-v2.4.0     NO (2)  OK
microblazebe            4.7     2.5.0           YES     OK
microblazeel            4.7     2.5.0           YES     OK
mips32r2el_malta        4.7     2.5.0           YES     OK
mips32r2_malta          4.7     2.5.0           YES     OK
mips32r6el_malta        4.7     2.6.0           YES     OK (3)
mips32r6_malta          4.7     2.6.0           YES     OK (3)
mips64el_malta          4.7     2.5.0           YES     OK
mips64_malta            4.7     2.5.0           YES     OK
mips64r6el_malta        4.7     2.6.0           YES     OK (3)
mips64r6_malta          4.7     2.6.0           YES     OK (3)
ppc_g3beige             4.7     2.5.0           YES     OK
ppc_mpc8544ds           4.7     2.5.0           YES     OK
ppc_virtex_ml507        4.7     2.5.0           NO      OK
ppc64_pseries           4.7     2.5.0           YES     OK
sh4                     4.7     2.5.0           YES     OK
sh4eb                   4.7     2.5.0           NO (1)  OK
sparc_ss10              4.7     2.5.0           YES     OK
sparc64_sun4u           4.7     2.5.0           YES     OK
sparc_sun4u             4.7     2.5.0           YES     OK
x86                     4.7     2.5.0           YES     OK
x86_64                  4.7     2.5.0           YES     OK
xtensa_lx60             4.7     2.6.0           YES     OK
xtensa_lx60_nommu       4.7     2.6.0           YES     OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/qemu/x86/linux-4.6.config

@@ -1 +0,0 @@
-../x86_64/linux-4.6.config

board/qemu/x86/linux-4.7.config

@@ -0,0 +1 @@
+../x86_64/linux-4.7.config

configs/pc_x86_64_bios_defconfig

@@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 

configs/pc_x86_64_efi_defconfig

@@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 

configs/qemu_aarch64_virt_defconfig

@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.7.config"

configs/qemu_arm_versatile_defconfig

@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.7.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"

configs/qemu_arm_vexpress_defconfig

@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"

configs/qemu_m68k_mcf5208_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_INITRAMFS=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_m68k_q800_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_microblazebe_mmu_defconfig

@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.7.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"

configs/qemu_microblazeel_mmu_defconfig

@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.7.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"

configs/qemu_mips32r2_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips32r2el_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips32r6_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_mips32r6el_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_mips64_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips64el_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips64r6_malta_defconfig

@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_mips64r6el_malta_defconfig

@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_ppc64_pseries_defconfig

@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_DEFCONFIG="pseries"
 BR2_LINUX_KERNEL_VMLINUX=y

configs/qemu_ppc_g3beige_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_mpc8544ds_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_virtex_ml507_defconfig

@@ -6,8 +6,8 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"

configs/qemu_sh4_r2d_defconfig

@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.7.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sh4eb_r2d_defconfig

@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.7.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sparc64_sun4u_defconfig

@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.7.config"

configs/qemu_sparc_ss10_defconfig

@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.7.config"

configs/qemu_x86_64_defconfig

@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"

configs/qemu_x86_defconfig

@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.7.config"

configs/qemu_xtensa_lx60_defconfig

@@ -16,15 +16,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"

configs/qemu_xtensa_lx60_nommu_defconfig

@@ -20,15 +20,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
+# Linux headers same as kernel, a 4.7 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.6-nommu.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7-nommu.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"