Using the newly introduced 'eglibc' package, this commit enables the
option of building a toolchain using the eglibc C library in the
Buildroot toolchain backend.
In details, this commit:
* Creates a choice to select uClibc or eglibc in the Buildroot
toolchain backend (in toolchain/toolchain-buildroot/Config.in), and
removes the fact that the Buildroot toolchain backend forcefully
enables uClibc (toolchain/Config.in).
* Creates a BUILDROOT_LIBC variables, which points to the package
implementing the C library (i.e either 'uclibc' or 'eglibc').
* Modifies the gcc-final and gcc-intermediate makefiles to use the
BUILDROOT_LIBC variable instead of hardcoding the use of uclibc.
* Ensures that TLS support is always enabled when building eglibc.
[Peter: fix commit text to refer to BUILDROOT_LIBC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the introduction of the eglibc library to the
internal toolchain backend, the options that allow to enable/disable C
library features such as largefile, IPv6, RPC and so on now belong to
the uClibc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of using the 'uclibc' target for all toolchain backends,
introduce more sensible target names for the external toolchain and
Crosstool-NG toolchain backend make targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update manual to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libfloat package was removed in
accbd71154, and therefore since this
commit, the LIBFLOAT_TARGET variable is always empty. We get rid of
the stale references to this variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The GCC_STRIP_HOST_BINARIES variable was always defined to 'nope',
which means that the host binaries were never stripped. Get rid of the
corresponding code, which is not in use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The KERNEL_SOURCE configuration option no longer exists in uClibc, so
there's no point in setting it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default uClibc configurations strip the resulting binaries/libraries
and don't add debug symbols which is a problem when wanting to debug
issues.
Bind the buildroot BR2_STRIP_* option to uClibc .config DO_STRIP and
BR2_ENABLE_DEBUG to uClibc DO_DEBUG.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For certain situations, users may want to install shared FLAT
libraries to the target filesystem even if FDPIC is used as the
primary binary format, or symmetrically users may want to install FDPIC
libraries to the target filesystem even if shared FLAT is used as the
primary binary format.
This commit allows that by:
* Offering additional Kconfig options to install shared FLAT or FDPIC
libraries even when those libraries are not selected as the primary
binary format.
* Preserving all Blackfin toolchain folders under the
TOOLCHAIN_EXTERNAL_DIR, instead of keeping only the one related to
the selected binary format.
* Adding some additional install targets that do the installation of
either the shared FLAT or FDPIC libraries when requested.
[Thomas: refactored code, adjusted commit log]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper was built with a gcc that uses hash-style 'gnu' by
default, the resulting binary might be unusable on other systems. The error
in this case is "Floating point exception".
Using hash-style 'both' solves this issue.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of a long list of the ARMv7-A Cortex-A, use a conditional
based on BR2_GCC_TARGET_ARCH to hide/show toolchains that are only
usable on ARMv7-A.
However, in the comment related to Linaro toolchains, we keep
mentioning Cortex-A{5,8,9,15} because that's what users see when they
select their architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We add support for Linaro 2013.04 and Linaro 2013.05 and remove
support for Linaro 2013.01 and Linaro 2013.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove old 2011.09 release. Allow MIPS64 cores on
2013.05 release since they are supported by the toolchain.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And mark 3.8.x series as deprecated to match upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper or any symbolic link to it was resolved by PATH,
the wrapper takes the working directory to calculate the relative paths.
Now '/proc/self/exe' is used to resolve the absolute path to the toolchain
directory if the wrapper was called neither with a relative nor an absolute
path.
[Peter: fix off-by-one, swap value == var checks around]
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ADI officially supports the buildroot and related GNU toolchain for
Blackfin since ADI's 2012R1 release only. In order to avoid confusion,
it is better to remove the 2011R1 GNU toolchain for Blackfin. In
addition, the 2011R1 GNU toolchain for Blackfin doesn't support the
BF60x processors.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When thread support is disabled, the libitm and libatomic libraries
from gcc should be disabled, otherwise, the build of gcc fails.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For a reason that's fairly unclear to me, Peter added a '-lz' link
flag to the elf2flt.mk build in d5664ee99 ("elf2flt: fix link").
However, the zlib library may not necessarily be installed on the host
machine, so we should depend on host-zlib, and pass the appropriate
LDFLAGS. This is what this patch does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason (probably because the ARC changes modify some lex/yacc
files without updating their pre-generated variants, or because the
date/time of the pre-generated files is not correct), building the ARC
gcc requires host-flex and host-bison.
We have tested 4.2 for AVR, 4.3 and 4.4 for ARM, and none of those
need host-flex or host-bison to be installed, so only the 4.4 for ARC
seems to be affected.
Fixes the build failure visible at
http://autobuild.buildroot.org/results/673c6262e3dde8ee8dd28204d814097e6ba8f8e9/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since gcc doesn't use the package infrastructure, it doesn't get all
the good generic environment variables, and forgets to get
$(HOST_DIR)/usr/bin in its PATH. This prevents gcc from finding and
using host tools built by Buildroot.
This patch therefore ensures that $(HOST_MAKE_ENV) or
$(TARGET_MAKE_ENV) are passed at the appropriate locations. It will be
useful for a later patch that makes gcc depend on host-flex/host-bison
in some situations.
Original patch by Thomas Petazzoni.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Prefer xz compressed tarball so some bandwidth is saved for kernel headers
and kernel itself downloads.
Signed-off-by: Raúl Sánchez Siles <rasasi78@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain logic checks (and finds) the proper ARCH_LIB_DIR
and forcibly copies it to */lib even if it's in */lib64
This is all well until the check is done for create_lib64_symlinks which
only verifies if ARCH_SYSROOT_DIR/lib64 is a symlink, which in some
toolchain it's a real directory (like sourcery x86_64 2012.09) and thus
doesn't make the symlink in the target.
Fix this by also checking for a real directory.
Easily reproducible by running "make qemu_x86_64_defconfig", switching
to an external toolchain before build, building and then trying to run
the resulting image.
Closes bug #5054
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For the following reasons:
- it used to be broken without anyone noticing for a long time,
- it is still not fully integrated within the Buildroot set of options,
- it has not gained much traction (not even I use it),
- I've always argued that sustained development should use an external
toolchain, and not rely on building one with Buildroot,
- I did not submit any of the enhancements requested during the last
developpers' day in Brussels,
- I have neither the incentive nor the time to maintain and enhance it,
it is time to deprecate the crosstool-NG backend for the 2013.05 release.
Then, it will be entirely removed early in the 2013.08 cycle, to let some
time for those that rely on it to voice their opinions. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 8d929f4b ("toolchain/gcc: Only enable --with-float when it makes
sense") restricted the --with-float use to only MIPS, ARM and SPARC,
while it seems that powerpc needs it as well.
Fixes the qemu_ppc_virtex_ml507_defconfig build.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adds the possibility to have a free-form CPU revision string and append it
to the target CPU. Only Blackfin actually uses this option.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just introduce the symbol and options in arch generic Config.in.
Append FLAT format link flags to external toolchain wrapper.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also make sure that older kernels are not selected for ARC.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
According to gcc/config.gcc, only ARM, MIPS and SPARC have the
"--with-float" option when configuring gcc.
[Peter: sort list]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For ARC, libgcc is always included, even when -nostdlib is given. This is
related to some small pieces of code that are not always generated by the
compiler; a call to libgcc is used in those cases instead.
During the initial stages of building the toolchain, this is a problem, as
libgcc does not exist yet. The ARC compiler supports -really-nostdlib to
override the default behavior.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ARC needs a specific GCC for now, while we wait for ARC support to get
upstreamed.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a FOO_SITE variable ends in a slash and gets joined with a
FOO_SOURCE variable like $(FOO_SITE)/$(FOO_SOURCE), the resulting URI
has a double slash. While double-slashes are fine in unix paths, they
are reserved in URIs - the part following '//' must be an authority.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 79828fc01d (toolchain-external:
update ARM Linaro toolchains) accidently broke the URL for the Linaro
2013.01 toolchain by replacing a .bz2 extension by .bz. This patch
fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The x86/x86-64 CodeSourcery toolchains use some weird locations for
the gdbserver binary:
$ find . -name 'gdbserver'
./i686-pc-linux-gnu/libc/atom/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/atom/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/lib64/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib64/bin/gdbserver
Notice that it's sometimes hidden in a usr/{lib,lib64}/bin
directory. This patch changes the gdbserver logic to also try in this
location.
Originally based on work done by Daniel Nilsson, visible at
http://patchwork.ozlabs.org/patch/155767/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Add Faraday FA526/626 as suggested on bug #1291
Note however that these cores are v4 and NOT v4t.
* Make the sa110 & sa1110 cores -> strongarm since they're the same.
* Drop all of the ARM variants lower than v4 including generic, there's
no point in supporting obsolete targets.
* Fix uClibc USE_BX logic, it was always on, this would break the new
FA526/626 support and broke StrongARM since it's a v4 core.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
git.xilinx.com is no longer available (moved to github), and github
doesn't allow downloading the tarball blobs directly, so use a local
mirror on sources.buildroot.net instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the AArch64 Linaro toolchains 2013.02 and 2013.03, remove 2012.11
and 2012.12.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ARM Linaro toolchains 2013.02 and 2013.03, remove 2012.11 and
2012.12.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 3.7.x series is EOLed upstream so match that marking it as
deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With 4.8.x released, it makes sense to update our default gcc version
before 4.6.x becomes unmaintained.
At the same time simplify the kconfig logic a bit.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer versions of texinfo (>=5) break the gcc makeinfo routine, so just
disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For each version of gcc, we need to check whether it requires mpc as a
dependency. Since this is true for 4.5, 4.6, 4.7, snapshots and now
4.8, let's factorize this code a bit by using a Kconfig symbol that
tells us whether we are using a gcc version that requires mpc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds support for the recently released gcc 4.8. We re-add
the same patch series as the one used for 4.7.x, after refreshing the
patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gcc snapshots are now located at
ftp://gcc.gnu.org/pub/gcc/snapshots/. This has been tested with a
recent 4.8.0-RC snapshot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Previously, the crosstool-NG backend did depend on the top-level
Buildroot's .config to detect changes in the toolchain options,
using a tentatively-clever heuristic, which also included the full
Buildroot's version string to push down to set the components' versions
strings.
In doing so, any commit in the Buildroot tree would imply a complete
rebuild of the toolchain, even in the case the toolchain options did
not change, thus being a large annoyance (to say the least).
As Buildroot never guaranteed that toolchain options would be detected,
even less handled, and that the internal backend does neither detect nor
act on toolchain options changes, and delegate that to the user, there
is no point in individualising the crosstool-NG backend's behaviour.
This reasoning also applies to the depdency on the crosstool-NG's bundled
.config file, too.
So, just drop the not-so-clever heuristic, and just build the toolchain
once, leaving to the user the responsibility to explictly ask Buildroot
to rebuild the toolchain.
Reported-by: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also mark 3.6.x as deprecated to match upstream EOL.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_KERNEL_HEADERS_2_6_35 symbol no longer exists since some time,
so get rid of code that was specific to this kernel version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing Microblaze toolchains that we have have the annoying
property of being based on a very old glibc version: 2.3.6. Xilinx
provides newer toolchains with glibc 2.14, generated by Crosstool-NG,
but they are only available as part of a huge Git repository that
contains the gcc, Linux, binutils, glibc sources unpacked (4.4 GB
total), which makes is very unpractical.
I contacted the Xilinx person who did those toolchains, but they
apparently didn't intend to change that anytime soon.
So, we have created a tarball for those toolchains, adding a
README.txt file in the tarball that points back to the original
location that contains the source code for them. Those tarballs are
hosted on sources.buildroot.net.
This commit then adds support for those two new external toolchains,
one for little endian Microblaze, another one for big endian
Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 1d8c3e6caf
The forward port breaks compilation at least for SPARC NPTL toolchains:
LD libuClibc-0.9.33.2.so
libc/libc_so.a(pipe.os): In function `__GI_pipe':
(.text+0x38): undefined reference to `__GI___errno_location'
collect2: ld returned 1 exit status
Easily triggered by a "make qemu_sparc_ss10_defconfig && make".
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without this patch programs using libglib2 (libsoup, etc.. ) and pthread
may be broken.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The manual linux headers option may specify versions other than the 2.6
series, so drop the "2.6"
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain wrapper sets sysroot etc. to an absolute path.
By changing this to a relative path, it is possible to move the host
directory to a different location and still have a working build
system.
This only works for a downloaded external toolchain. For a pre-installed
external toolchain, it is possible to move the host directory to a
different location, but not the external toolchain directory (it does work
if the external toolchain directory lies within the host directory). For
an internal or crosstool-ng toolchain, there is no wrapper so updating the
sysroot path should be done in a different way.
See http://lists.busybox.net/pipermail/buildroot/2012-February/050371.html
for information about others things to do to make the host directory
relocatable.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the exact same problem than
21a0c11a90, but for the gdbserver
build. The problem is that when you use the Crosstool-NG toolchain
backend, gawk gets built as a dependency of Crosstool-NG. So the gdb
configure scripts detects it, and assumes it is in the PATH (because
the gdb configure step gets run with TARGET_MAKE_ENV).
But then, the build fails, because it tries to run gawk, but gawk
isn't in the PATH, because we forget to use this TARGET_MAKE_ENV
variable when building gdbserver.
Fixes http://autobuild.buildroot.org/results/d0173de533b5e2fffed2eff7327a502ed2d787cd/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a uClibc patch from OpenWRT, and tweak an existing patch to cope with
the lack of a dup3 Linux syscall on avr32. This allow uClibc 0.9.33.2 to be
built for avr32.
[Peter: add upstream url for openwrt patch]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the old 2010RC1 toolchain and add the new 2012R2-RC2 toolchain.
On related good news the new toolchain fixes:
http://autobuild.buildroot.net/results/eac5bd4f4766d98431e72a3c81492a962c85fa98/
since it's got unshare() support now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
At the same time, remove two debug echoes (Arnout).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Eclipse plugin at
https://github.com/mbats/eclipse-buildroot-toolchain-plugin allows
users of Eclipse to easily use the toolchain available in
Buildroot. To do so, this plugin reads
~/.buildroot-eclipse.toolchains, which contains the list of Buildroot
toolchains available on the system, and then offer those toolchains to
compile Eclipse projects.
In order to interface with this plugin, this commit adds an option
that allows the user to tell whether (s)he wants the Buildroot project
toolchain to be visible under this Eclipse plugin. It simply adds a
line in this ~/.buildroot-eclipse.toolchains file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
No need to recreate a path we already have.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some users seem to interpret:
make ctng-menuconfig
as being a value that can be fit for the ct-ng config file.
Clarify that it is a command to run, not a possible value.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All supported pre-built external toolchains are built for x86 Linux,
so we add the BR2_HOSTARCH_NEEDS_IA32_LIBS select.
[Peter: microblaze toolchains are 64bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The pre-build external toolchains are all built for x86, so they are
only available if the build machine is a x86 or x86-64 machine.
[Peter: microblaze toolchains are 64bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using the crosstool-ng toolchain option, the libc libraries were not
installed to target. Buildroot calls the show-tuple function to determine
the directory to copy from, and it seems that outputs the result to stderr
instead of stdout
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version of glibc to be used, since older versions are
broken with the currently-used binutils versions.
Fixes build issues ending with:
tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without
previous .cfi_startproc
This new version does not have RPC support, so update the Config.in.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have updated our Crosstool-NG configuration to gcc 4.6.x, but the
PPL and CLoog versions were not updated accordingly. With gcc 4.6.x,
at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL
0.11.
Fixes:
http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the arm processor types: add the cortex A5 & A15 variants.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the powerpc processor types.
Remove the 801, it's the original IBM experimental implementation.
Add the 464, 464fp, 476 and 476fp cores.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This bumps the GCC version from 4.4.6 to 4.6.3 to for
*.config-eglibc
*.config-glibc
*.config-uClibc
be equal to the default GCC setting in buildroot as well in addition to
commit b855154ee8.
Signed-off-by: Carsten Schoenert <c.schoenert@t-online.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Whatever the gdbserver source, as long as it's installed on the target,
assume it requires libthread_db.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building gdb for the host, we properly pass the PATH (through
HOST_CONFIGURE_OPTS) during the configure step, but we forget to do so
for the compilation step.
The result of this is that when the Crosstool-NG backend is used, gawk
is built and installed in $(HOST_DIR), as a dependency of the
crosstool-ng package.
Then, the host gdb configure script detects this gawk binary
($(HOST_DIR) is in the PATH), and assumes gawk is
available. Unfortunately, during the compilation step, it fails to
find the expected gawk binary, because $(HOST_DIR) is no longer in the
PATH. This causes the following build failure:
http://autobuild.buildroot.org/results/067d0c2ea01673ba98ec11de2426f1ab92dac800/build-end.log
In order to fix this, we simply call the compilation step of gdb for
the host with $(HOST_MAKE_ENV), as it should have been done from the
beginning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On ARM, Linaro external toolchains are only visible if the user
selects Cortex-A8 or Cortex-A9. Therefore, we add a comment that tells
the user that the Linaro toolchains are only available under those
conditions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix build breakage, use the version of the ptrace header file in asm
instead of sys. Also, fix GDB running on 64 bit hosts. GDB was using
unsigned long for 32-bit registers, but unsigned long is 64 bit on
64-bit hosts.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed during the ELCE 2012 Buildroot Developers Meeting, we no
longer want to support the possibility of building a toolchain for the
target. None of the core developers have any use for this, it has been
known to be broken or cause problems for a long time without anyone
providing fixes for it.
In addition to this, Buildroot is inherently a cross-compilation tool,
so the usage of a native toolchain on the target is not really
useful. Many newcomers are tempted to use this possibility even though
it is clearly not the intended usage of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch has since a long time been merged upstream in uClibc, so it
cannot apply on any of the recent uClibc snapshots.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Basically, the BR2_TOOLCHAIN_EXTERNAL_GLIBC option no longer
unconditionally selects BR2_TOOLCHAIN_HAS_NATIVE_RPC since there are
glibc toolchains that don't have RPC support. All the predefined
toolchain profiles are updated to take into account this change: for
the moment, all glibc toolchains that have pre-defined toolchains have
RPC support, but further patches in the series add pre-defined glibc
toolchains that don't have RPC support. In the case of custom glibc
toolchains, a question is asked to the user so that he can say whether
the external glibc toolchain has RPC support or not. The validity of
this configuration option is checked by the new
check_glibc_rpc_feature function in helpers.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are some day going to finally rename the badly named common
toolchain options (BR2_USE_WCHAR, BR2_ENABLE_LOCALE, BR2_INET_RPC,
etc.) into something more logical, let's start using the Crosstool-NG
toolchain options in the Crosstool-NG code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are some day going to finally rename the badly named common
toolchain options (BR2_USE_WCHAR, BR2_ENABLE_LOCALE, BR2_INET_RPC,
etc.) into something more logical, let's start using the Buildroot
toolchain options in the uClibc code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain without thread debug is used, the gdb
package can be selected, but no version can be choosen, since none
match any of the requirements. This leads Buildroot to try to build
gdb for the target without a version being defined, as in the
following build log:
http://autobuild.buildroot.org/results/84e8fd2df0cc22448052a572c2e9a6e03dd137eb/build-end.log
To fix this, we adjust the dependencies of the BR2_PACKAGE_GDB option
so that the package as a whole is not selectable when the required
conditions are not met. Basically, we have the choice of:
* Having a toolchain that supports thread debugging, which is needed
for gdb >= 7.x
* Having BR2_DEPRECATED enabled, which allows gdb 6.8 to be selected,
which doesn't require thread debugging
* Using bfin, since this architectures has a special old gdb version
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our internal toolchain backend does not yet have support for AArch64,
and Crosstool-NG also does not have support for AArch64 at the moment
(though it should be coming quickly since the Linaro AArch64 toolchain
is generated with a modified Crosstool-NG version).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ld-linux*.so may not be present in lib/ directory, it could be
in lib32 and/or lib64 only. But check_glibc reports
"Incorrect selection of the C library" in this case, which is
not true.
Fixed by extending the search to SYSROOT/*/*.
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 11017f081f, the Crosstool-ng
backend generates toolchains that have a prefix inconsistent with what
Buildroot expects. Buildroot expects a "buildroot" vendor name, while
Crosstool-NG builds toolchain with the "unknown" vendor name.
This is causing build failure such as:
http://autobuild.buildroot.org/results/15b2c0e50a81b86dd13af684c9254df2bc0df8de/build-end.log
Fix this by changing the vendor part of the tuple used by Crosstool-NG
to "buildroot".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Yann E. MORIN says:
"Although eglibc can be configured to include/exclude parts of the
features, it seems to not be in wide use, if at all."
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_SPARC_TYPE is a hidden configuration option that is only used for
the configuration of uClibc, therefore, we move it from
target/Config.arch.in to toolchain/uClibc/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_ARM_TYPE is a hidden configuration option that is only used for
the configuration of uClibc, therefore, we move it from
target/Config.arch.in to toolchain/uClibc/Config.in.
We also add a comment that explains that this stuff is only useful for
uClibc <= 0.9.32. Starting from 0.9.33, uClibc build process simply
uses the compiler flags to find the ARM processor that should be
used. So, someday, we'll be able to remove this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Practically speaking, MIPS has three useful ABIs:
* o32 is for 32-bits CPUs, or 64-bit CPUs running only a 32-bit subset
of the instruction set.
* n32 is for 64-bits CPUs only. It has 32-bits pointers and long
integers.
* n64 is for 64-bits CPUs only. It has 64-bits pointers and long
integers.
See http://www.linux-mips.org/wiki/MIPS_ABI_History and
http://www.linux-mips.org/wiki/WhatsWrongWithO32N32N64 for more
details.
So, this commit reworks the Buildroot MIPS support by:
* Add separate mips64/mips64el top-level architectures.
* Renaming the n32 ABI option to BR2_MIPS_NABI32, for consistency
with BR2_MIPS_OABI32.
* Renaming the n64 ABI option to BR2_MIPS_NABI64, for consistency
with BR2_MIPS_OABI32.
* Make the n32 and n64 ABI selections select the BR2_ARCH_IS_64,
since those ABIs are valid on 64-bits CPUs only.
* Removing the o64 ABI, which is practicaly never used.
* Removing the "none" ABI, which really doesn't make sense.
* Introduce the mips64 and mips64el architecture names when a 64-bits
MIPS ABI is choosen. This will fix build issue like
http://autobuild.buildroot.org/results/9b8c5ea86c953a89e85e7b67e9221de41773f652/build-end.log
where gmp was confused by the fact of having a 32 bits architecture
(detected by the mips- architecture part of the tuple) but 64 bits
integer size when compiling.
* Adjust the uclibc.mk logic to support the new mips64/mips64el
architecture names, and take into account the renaming of the ABI
options.
This has been build tested by generating Buildroot toolchains and
compiling a few packages for MIPS o32, MIPS n32 and MIPS n64.
This work is originally based on prior work done by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Introduced by 68973cca2 (adjust logic to support Linaro 2012.05)
Reported-by: R Zhong <rzhong@hotmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit ba92d6ef68 made hard float the
default when Cortex-A8 and Cortex-A9. The problem it was trying to fix
is that the newer Linaro toolchains (2012.05 and 2012.06) are
hard-float, so the default selection of soft-float enabled on ARM
doesn't work for those toolchains.
Unfortunately, not selecting soft-float causes problems with
the Crosstool-NG backend at the moment.
As an intermediate solution, make the soft float option disappear when
using external toolchain: the toolchain will decide by itself whether
to generate hard float or soft float code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of having two separate list of choices for select the target
architecture variant for i386 and x86_64, with many CPU choices
duplicated (because all modern x86 CPUs can be both used as i386 or
x86_64), merge them into a single list. In the x86_64 case, all the
x86 CPUs that do not support the 64 bits instruction set are hidden.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the defconfig files used by the autobuilders that use
pre-installed external toolchains are making the assumption that the
default for a custom external toolchain is "pre-installed". We keep
this default for now, since changing it breaks the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cortex-A8 and Cortex-A9 ARM cores are guaranteed to provide a hardware
floating point unit, so there's no reason to default to software
floating point for them.
More importantly, the newest Linaro toolchains are hard float
toolchains, so basically an user choosing those toolchains and leaving
the default option of software float would run in compilation issues.
So let's make hard float the default for Cortex-A8 and Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_glibc function verifies that the C library of the external
toolchain is glibc. To do so, it verified that a file matching
ld-linux*.so.* or ld.so.* was found in the lib/ directory of the
toolchain's sysroot. However, with the Linaro 2012.05 toolchain, the
lib/ directory contains two links named ld-linux-armhf.so.3 and
ld-linux.so.3, which means that the first ld-linux*.so.* wildcard
expression expands to two files, which generates a syntax error for
the "test" program. We replace that with a more elaborate find+wc
combination to determine whether at least one matching file is
present.
The check_arm_abi function verifies the ABI of an ARM toolchain. For
EABI, it tested that the target name ends with eabi. However, with
Linaro 2012.05, the tuple is now arm-linux-gnueabihf (for hard float),
so we have to adjust the logic to accept this additional "hf"
specification in the tuple.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Line-up with changes from commit 3367d5ce77
"external-toolchain: run checks even on extracted toolchains"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the possibility to download a custom external
toolchain, in addition to the existing support of preinstalled custom
external toolchains.
With the modified configuration, the user is presented with the
following options:
- Toolchain type: Buildroot toolchain | External toolchain | Ct-ng toolchain
In case of External toolchain:
- Toolchain: the CodeSourcery toolchains | Custom toolchain
- Toolchain origin: Toolchain to be downloaded and installed | Pre-installed toolchain
In case of Toolchain to be downloaded, the user is presented with:
- Toolchain URL
In case of Pre-installed toolchain, the users sees:
- Toolchain Path
For CodeSourcery toolchains, the toolchain URL field is not used (the
URLs are directly coded in ext-tool.mk).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the indentation of the external toolchain Config file, where tabs
and spaces are mixed as indentation even within the same block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS EABI is a bare-metal ABI so remove it.
Also fix uClibc to really work with N32 ABI, which used the EABI knob
previously.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Block unsupported processors according to gcc version.
Also remove the comments since we now hide them according to this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump default snapshot gcc version to 4.8-20120429 so that it is newer
than our latest supported version (4.7.0 release).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Decimal floats were introduced circa gcc-4.2 or -4.3, and requires
the floating-point environement fenv.h in the C library.
The uClibc .config file used by crosstool-NG to build uClibc is the
same as used by the internal buildroot mechanism, and explcitly
disables fenv support.
The quick workaround is to simply disable decimal floats in all
crosstool-NG config files.
In the long run, it might be better to check this situation, and/or
add code and/or options in crosstool-NG to handle this (but it is
much more involved, and this workaround is sane).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SUPPORT_LIB_DIR would get resolved to the main buildroot directory for
external toolchains without C++ support, as:
- gcc -print-file-name=<nonexisting-file> returns <nonexisting-file>
- readlink -f <nonexisting-file> returns $PWD/<nonexisting-file>
So fix it by ensuring output of gcc -print-file-name actually exists
before using it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version of crosstool-Ng used, bump to 1.15.2.
Also, update the bundled config files to match the new version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 0729b544b3 (Improve external toolchain logic to support IA32
Sourcery CodeBench toolchain) and e1f0804cc (external-toolchain: add
support for recent Linaro toolchains) changed the interface of
copy_toolchain_lib_root, but ctng wasn't updated so libraries weren't
copied to the target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to use locale support on a Linux system, you need locale data
to be present:
* on a (e)glibc based system, this data is typically in the
/usr/lib/locale/locale-archive file, which can be created and
extended using the localedef program
* on an uClibc based system, the set of supported locales is defined
at build time by an uClibc configuration option.
This patch implements generating locale data for the following cases:
* Internal toolchain
* External toolchain based on (e)glibc. uClibc external toolchains
are not supported, because with uClibc, the set of supported
locales is defined at build time. CodeSourcery and Linaro
toolchains have been tested, Crosstool-NG toolchains are believed
to work properly as well.
* Toolchains built using the Crosstool-NG backend, but only (e)glibc
toolchains.
This feature was runtime tested with internal uClibc toolchain,
CodeSourcery ARM toolchain and Linaro ARM toolchain, thanks to a
simple C program that shows the data and a gettext translated message.
Note that this option differs from the "purge locales" option, which
is responsible for removing translation files and other locale stuff
installed by packages. At some point in the future, we may want to
clarify the respective roles of those options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the crosstool-ng backend is used, host-gawk is built as a
dependency of the crosstool-ng package, and therefore an host 'gawk'
binary is installed in $(HOST_DIR).
When the target gdb package is also selected, this unfortunately leads
to a build failure, as reported on
http://buildroot.humanoidz.org/results/f19c0499d08212d8b5100fa9434e1197092957db/build-end.log.
The problem is that the ./configure of gdb detects gawk in the PATH,
but at compile time, it fails to find gawk. This is due to the fact
that the gdb compilation process is started without the correct path.
This patch fixes this by passing $(TARGET_MAKE_ENV) in the environment
of the gdb compilation process.
A better fix would be to switch gdb to the AUTOTARGETS infrastructure
in the future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Starting from 2012.03, the Linaro toolchains have separated the GCC
support libraries (libstdc++, libgcc_s) from the sysroot itself. So we
no longer have the case where all libraries are inside the sysroot, as
we had for all the previously supported toolchains.
Therefore, we add some logic to detect if such a separate directory is
used for GCC support libraries, and if it's the case, we make sure
that we take into account this directory when creating our own
sysroot, and when copying libraries to the target filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable uClibc 0.9.33.1 for the SH architecture.
Builds and works fine with the qemu sample config.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable AI_ADDRCONFIG support in uClibc otherwise we don't get the
ifaddrs.h header installed and thus lack getifaddrs support.
Quite useful for samba for example so we can use interfaces=eth0 statements in
the configuration file rather than klunkier
interfaces=192.168.1.1/255.255.255.0 ones.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for mklibs has been marked broken since more than a year
and nobody cared to bring it up to a working state.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Re-integrate in gcc-uclibc-4.x.mk things from
toolchain/gcc/Makefile.in that were completely gcc-specific. There was
no reason to pull that when building with other backends than the
internal one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_CONFIGURE_DEVEL_SYSROOT, BR2_CONFIGURE_STAGING_SYSROOT and
BR2_CONFIGURE_BUILD_TOOLS were used only in a few places, and it is in
fact clearer to just use their value in the various places they are
used.
The ultimate goal is to get rid of the toolchain/Makefile.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.7.0 to the toolchain options.
[Peter: drop 0001-toolchain-gcc-add-4.7.x-series.txt]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch from the strict UCLIBC_HAS_CTYPE_ENFORCED=y to the less
restrictive UCLIBC_HAS_CTYPE_CHECKED=y since it breaks dialog under
certain circumstances (bug #5018).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The big-endian microblaze external toolchain is missing vital
characteristics being set, such as LARGEFILE support, IPV6 and so on.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 3.3 kernel headers define the umode_t type within a __KERNEL__
preprocessor ifdef region. This results in a broken kernel header in the
buildroot toolchain.
[Peter: This is discussed upstream here:
https://bugzilla.kernel.org/show_bug.cgi?id=42986
Long term socat/syslinux should stop using this header, but this hasn't
been fixed upstream yet]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It adds very little size overhead as the functions are just wrappers
around utmp, and E.G. systemd needs it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While there's some microblaze support in mainline gcc from 4.6.x,
there still seems to be something missing with the uClibc support, so
disable these for now.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When binutils was converted to the package infrastructure (commit
009407e6b), the variable that elf2flt uses to find the binutils
libraries disappeared. So use HOST_BINUTILS_DIR instead of
BINUTILS_DIR1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, it is very likely that it contains
a pre-built version of a gdbserver that has the same version as the
cross-gdb included in the external toolchain. So, we now provide an
option that allows to copy this pre-built gdbserver to the target.
As the location of the gdbserver in the external toolchain is not
standardized, we only support the CodeSourcery and Crosstool-NG
layouts for the moment. Other locations can be added later.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without the -m64, choosing the x86_64 architecture with a Sourcery external
toolchain will result in a 32-bit rootfs.
Also simplified the help text to reflect this change.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Linaro has just released a new pre-built toolchain, available as a
tarball, which is a pure toolchain (only the C library is
included). This makes this new Linaro 2012.01 toolchain usable in
Buildroot, so let's integrate the support for it.
In addition to simply adding the new external toolchain at the usual
locations, this patch allows need to adapt a few things to support
Linaro toolchains. Most toolchains store their libraries in the "lib/"
or "usr/lib" directories relative to the toolchain. Buildroot
toolchains on the other hand, store the libraries in the
"usr/<target-name>/lib" directory. And the Linaro toolchain has
choosen to use the "lib/<target-name>" directory. Therefore, this
patch adjust:
* The logic to search a particular library when that library needs to
be copied to the target directory
* The logic to deduce the sysroot directory from the libc.a file
location in the toolchain: removing "(usr/?)lib(64?)" is no longer
sufficient, we need to take into account the "lib/<target-name>/"
case.
Since the Linaro toolchain generates code for Cortex-A processors
only, the selection of this toolchain is limited to Cortex-A8 and
Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current check for uClibc toolchain was verifying that a
ld-uClibc.so dynamic loader was present. However, with static-only
uClibc toolchains, this does not work. Instead, we check for an
uClibc-specific header file in the sysroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the mechanism that allows Buildroot to download external
toolchains automatically was added, all the sanity checks on the
external toolchains were not performed. This commit re-enables those
checks that we already do on external toolchains that are not
downloaded/extracted by Buildroot. This makes the toolchain checks
more consistent accross various configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Each multilib variant need to be selected using a special combination
of flags, requiring specific choices of the Buildroot options. This
commit documents those configuration choices to make it easier to use
the various multilib variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to add one more ARM Sourcery toolchain version, so it's
time to remove the oldest version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TARGET_OPTIMIZATION flags were not used by the external
toolchain wrapper, which broke the multilib selection logic of
multilib external toolchains. It also simplifies the compilation of
external programs since all flags are properly passed automatically by
the toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When an external toolchain has multiple variants organized in
sub-directories, Buildroot only copies the selected sysroot and not
all sysroots. In order to make this work, Buildroot creates a symbolic
link of the name of the original selected sysroot to the main sysroot
to trick the compiler so that it finds its libraries at the expected
location.
I.e, if the toolchain as the following organization (example take on
the ARM CodeSourcery toolchain) :
. for ARMv5T
armv4 for ARMv4T
thumb2 for ARMv7-A/Thumb
and ARMv4T is selected, then Buildroot will copy the contents of
armv4t/ from the toolchain into its $(STAGING_DIR) and then create a
$(STAGING_DIR)/armv4t symbolic link to $(STAGING_DIR).
However, our logic to do so only works when there was one directory
level for multilib sysroots. But in the MIPS CodeSourcery toolchain
there are multiple levels. For example, the MIPS16 soft-float
little-endian sysroot variant is in mips16/soft-float/el/ compared to
the main sysroot.
This patch improves our logic to support this case. The logic is a bit
more complicated as we don't want to create a symbolic link to an
absolute path, but a symbolic link to a relative path, because we want
the host/ directory to be relocatable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The IA32 Sourcery CodeBench toolchain has a relatively special
structure, with the following multilib variants:
* Intel Pentium 4, 32 bits, the multilib variant is in ./ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Xeon Nocona, 64 bits, the multilib variant is in ./ relative
to the main sysroot, with the libraries in the lib64/ directory.
* Intel Atom 32 bits, the multilib variant is in atom/ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Core 2 64 bits, the multilib variant is in core2/ relative to
the main sysroot, with the libraries in lib64/ directory.
So the first two variants are in the same sysroot, only the name of
the directory for the libraries is different.
Therefore, we introduce a new ARCH_LIB_DIR variable, which contains
either 'lib' or 'lib64'. This variable is defined according to the
location of the libc.a file for the selected multilib variant, and is
then used when copying the libraries to the target and to the staging
directory.
In addition to this, we no longer use the -print-multi-directory to
get the ARCH_SUBDIR, since in the case of the 64 bits variants of this
toolchain, it returns just '64' and not a real path. Instead, we
simply compute the difference between the arch-specific sysroot and
the main sysroot.
We also take that opportunity to expand the documentation on the
meaning of the different variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout Vandecappelle, move toolchain/dependencies to
support/dependencies, as it really is not toolchain-specific anymore.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With default values so it doesn't stop build and ask user. Also disable
2.4 modules support by default like upstream does.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to how we do for target (ee39d53ce3ee (Fix GDB BFD test linking)).
Gdb comes with an embedded copy of libiberty, but binutils also installs
libiberty.a into HOST_DIR. The gdb configure script tries to link against
this one rather than the gdb version when it checks for ELF support.
This may fail if those versions are not compatible, leading to obscure
error messages from gdb at runtime such as:
I'm sorry, Dave, I can't do that. Symbol format `elf32-$ARCH' unknown.
Fix it by forcing ELF support.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump 3.0.x series to 3.0.17, 3.1.x series to 3.1.9 and 3.2.x series to
3.2.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Has been marked as broken since July 2010 (39e6ba1b), and nobody has
stepped up to support it, so now finally remove it completely.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ability for buildroot to build an SPE ABI enabled toolchain.
This is mandatory for e500v1/v2 cores since they don't support classic
FPU mode as the e500mc does.
Useful for Freescale's PowerQUICC III and single/dual-core QorIQ
line of processors.
The new TARGET_ABI variable is used rather than TARGET_CFLAGS for
uclibc's UCLIBC_EXTRA_CFLAGS to avoid breakish CFLAGS leaking in, a
good example being -mthumb for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: rename headers_install patch so it gets applied]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 4.3.x series is getting quite old, so let's use 4.5 instead.
There were reports of problems in the past, which is why this is done
early in the cycle.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the uClibc build procedure to accomodate for the new build
system, otherwise it breaks with snapshot versions.
As pointed by linuxjacques on IRC.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add unshare() syscall support for uClibc 0.9.31 and 0.9.32 series.
This is required by newer versions of iproute2.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Most of the extract tools (gzip/bzip/..) we already check for explicitly
in dependencies.sh (as they are used outside GENTARGETS), but not for
xzcat.
The .xz format is used fairly rarely, and it is likely to not be available
on build hosts, so an explicit (hardcoded) check for it isn't optimal.
Instead, add the inflate tools used to DL_TOOLS_DEPENDENCIES, similar to
how we do it for svn/git/bzr/...
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Modern versions of patch (2.6.1.81 / 85 tested) gets confused by the empty
git trailer referencing uClibc_errno.h (from when patch was forward ported
from 0.9.31), so drop it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer versions of GDB need pthread debugging support if threads are
enabled, which is always the case for glibc but is a configure option
for uClibc.
We have solved this for internal toolchains by selecting the
BR2_PTHREAD_DEBUG option from the GDB selection if needed, but as this
option isn't available when ctng/external toolchains are used, mconf
prints ugly warnings and the build may fail if an external uClibc
toolchain without pthread debugging support is used.
Fix it by introducing 2 more hidden config options:
- BR2_TOOLCHAIN_HAS_THREADS_DEBUG
- BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED
The first tells us if the toolchain HAS pthreads debugging support,
and is checked by check_uclibc_feature in helper.mk for external uClibc
based toolchains.
The second tells us if the toolchain is ABLE TO provide pthreads debugging
support if threads are enabled, either because it's an internal toolchain
where we can force enable it or an external glibc/eglibc toolchain or
uClibc with the option enabled.
Crosstool-ng forcibly enables this support, so those will always work.
The preconfigured uClibc-based toolchains we have also all enable it.
Finally, show a comment if this isn't the case so the (external toolchain)
user knows why. This is placed outside the choice option, as menuconfig
has a bug where it doesn't show choice selections which only contain
comments.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Files package/lzma/lzmacheck.sh and toolchain/dependencies/check-host-lzma.sh
are present since the very beginning of buildroot, but do not appear to be
used (anymore). Let's remove them.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, the dependencies target (that runs dependencies.sh) depends on
DEPENDENCIES_HOST_PREREQ. This means that the dependencies listed in
DEPENDENCIES_HOST_PREREQ (currently host-sstrip if sstrip is selected) are
built *before* the dependencies.sh script is run.
As a result, if e.g. there is no gcc compiler present on the build system, the
dependencies in DEPENDENCIES_HOST_PREREQ will fail to build, and buildroot
will fail non-gracefully.
This patch makes sure that the DEPENDENCIES_HOST_PREREQ are checked *after* the
dependencies.sh script, so that any problem in the build system is reported in
a clean way by dependencies.sh.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4021
Fix build breakage for sparc as reported in bug #4021
Patches from Konrad Eisele <konrad@gaisler.com>
Submitted in the uclibc mailing list.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Compiling gdb for the target requires thread support in the C library,
otherwise:
/home/test/outputs/test-888/toolchain/gdb-7.3.1/gdb/gdb_thread_db.h:37:21: fatal error: pthread.h: No such file or directory
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gdb debugger does not have support for running as the native
debugger on the SuperH architecture:
configure: error: "*** Gdb does not support native target sh4-unknown-linux-gnu"
See also http://lists.debian.org/debian-superh/2010/04/msg00000.html.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original name uclibc-update is confusing as it only updates a
configuration file.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using a CT-NG toolchain as external toolchain (not with the
integration) and said toolchain has u-w directories rsync fails.
So instruct rsync to chmod u+w directories in the target copy to avoid
the issue.
[Peter: notice that this is a workaround for a rsync 3.0.8 bug]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Permit to define the mcpu of the external toolchain wrapper, based on
BR2_GCC_TARGET_CPU.
Signed-off-by: Stany MARCEL <stanypub@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the external tools chain is installed in a path that match one of
the first case test, all symlink are created to the external
wrapper. The proposed solution is to test only the base name not the
full path.
Signed-off-by: Stany MARCEL <stanypub@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version in the package description. Update the default
configuration files for the three different C libraries.
[Peter: Removed unneeded changes as noticed by Baruch Siach]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the user has Perl local::lib installed, its environment contains
a PERL_MM_OPT variables which defines
INSTALL_BASE="/some/location". Unfortunately, having this makes the
build of libxml-parser-perl (and probably other Perl related packages)
fail, because it complains that both PREFIX (passed in our .mk file)
and INSTALL_BASE (passed from the PERL_MM_OPT environment variable)
are defined. Since in Buildroot we want our PREFIX to be considered,
we error out when the user has PERL_MM_OPT defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The copy_toolchain_lib_root helper searches the entire sysroot, but is
only interested in files in certain subdirs. So rather than waste time
in walking the entire tree, walk the few subdirs at the depth level we
are actually going to be poaching files from.
Some simplification suggested by Yann E. MORIN
<yann.morin.1998@anciens.enib.fr> and Arnout Vandecappelle
<arnout@mind.be>, added by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some CodeSourcery toolchains contain a huge number of locales that are
not useful, even though they account for 70-80% of the total toolchain
size. By skipping the extraction of those useless locales, we make the
toolchain extraction process slightly faster, and also make the output
directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB
with a 2010.09 ARM CodeSourcery toolchain).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that CodeSourcery has been bought by Mentor Graphics, the
toolchains are named "Sourcery CodeBench". We rename the config short
description and adjust the help text, but we keep the option name in
order not to break existing configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Custom toolchains may provide extra libraries that need to be copied to the
target. This patch adds a configuration option for this.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The sysroot of an ARM CodeSourcery toolchain takes about 1.4 GB of
space, but 1.1+ GB of this space consists in locale-related
information which Buildroot doesn't use. By skipping the copy of those
unused files, we save quite a bit of time while importing the
toolchain sysroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gdb tarballs have been re-released after a GPL compliance
issue was found:
http://sourceware.org/ml/gdb/2011-09/msg00030.html
So all versions were re-packaged.
In the process, an 'a' was appended to the version strings, and
unlike the binutils people, the gdb folks are not inclined in
providing legacy symlinks:
http://sourceware.org/ml/gdb/2011-09/msg00036.html
So, this patch fixes the issue by renaming version strings. It is to be
noted that, although the versions got bumped to include an 'a' at the end,
the directory contained in the tarball is still named after the version
string without the 'a'. For example:
- old version : 6.6
- new version : 6.6a
- tarball name : gdb-6.6a.tar.bz2
- directory name : gdb-6.6/
In fact, it does not pose any problem for buildroot, as the extract process
explicitly mkdirs the directory to extract into, *and* strips the first level
of the tree extracted from the tarball.
[Peter: fixup patch to apply to head, don't rename config symbols]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some tarballs of gdb (see next patch), the extracted directory is
*not* named after the version string (eg. gdb-6.6a extract into gdb-6.6/)
Create the appropriate directory first, then use --strip-{components,path}
when extracting gdb (the same way it is done for the generic package
infrastructure).
At the same time, get rid of the snapshot special case, because:
1- it's no longer available in the menu
2- it would be handled by the above change
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
this version fixes compilation issue on some old build systems like
openSUSE 10.3 saying some host libraries were too old
[Peter: drop bugfix number from config name, similar to kernel-headers]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
rsync can now be used for overriden package, and will also be used for
other purposes in the future (optimization of toolchain copy time,
etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes E.G. mtd/ubi-user.h, which otherwise breaks busybox 1.9 builds
with ubi applets.
Upstream post 3.0 and discussed here: https://lkml.org/lkml/2011/6/22/25
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CONFIG_UPDATE macro is no longer defined in
package/gnuconfig/gnuconfig.mk, but instead in
package/Makefile.autotools.in. It it also changed a little bit to take
the directory of the package sources as argument, and the AUTOTARGETS
infrastructure is updated to use this macro.
[Peter: drop echo in CONFIG_UPDATE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name "patch-kernel.sh" is a bit stupid, since this script is used
to patch everything in Buildroot, not only kernel trees.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The website for downloading the toolchain has changed from
http://www.codesourcery.com to http://sourcery.mentor.com
Signed-off-by: Subramaniam C.A <subramaniam.ca@ti.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The prefix is not set when selecting this toolchain, resulting in a
build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bundled config files have architecture-specific values in them,
which may break if buildroot is configured with another architecture
that does not forcibly set these option.
For example, the bundled config files are for x86_64, and define:
CT_ARCH_TUNE="generic"
This comes from the BR2_GCC_TARGET_TUNE config option (in buildroot) that
is set accordingly to the selected (arch,sub-arch).
But if someone configures buildroot for, say, generic ARM, then the
BR2_GCC_TARGET_TUNE config option is not set, and the crosstool-NG backend
Makefile believes it should not be pushed down to the crosstool-NG config
file.
BUT...
The crosstool-NG backend Makefile can not forcibly push BR2_GCC_TARGET_TUNE
down to the CT-NG config file. If BR2_GCC_TARGET_TUNE is empty, the user can
still set CT_ARCH_TUNE by running ctng-menuconfig.
The backend Makefile already passes such values only if they are set.
In the end, we can't push options as-is to the crosstool-NG config, but we
MUST provide sane bundled config files, which this patch does.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the crosstool-NG libc-specific config files to match the
new set of options coming with the updated crosstool-NG.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CodeSourcery toolchain for SH2-A platforms provide largefile
support, inet RPC, wide char and threads, so adjust the configuration
accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The internal toolchain defaults to thread support enabled (and
most external toolchains have thread support as well), so enable
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow the user to specify additional options for the target LDFLAGS.
I use this to pass the -te500v2 option to the linker, when using the
CodeSourcery toolchain for PowerPC. This chooses the correct CRT for e500 hard
float. Otherwise I get errors like
undefined reference to `_save32gpr_31'
undefined reference to `_rest32gpr_31_x'
at final link time.
[Peter: fixup, use qstrip]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sh2eb and sh2a_nofpueb gnuconfig targets are no longer supported
in Buildroot. This patch replaces these Buildroot targets with sh2
and sh2a respectively, and adds sh4a targets as these are widely
used.
To build for devices without an fpu, the relevant toolchain flags
will have to be specified.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move crosstool-NG to package/ and make it an autotarget package.
This requires a new patch (now upstream).
Now, the crosstool-NG toolchain backend only contains enough to build
the toolchain, there's no more reference to building crosstool-NG as
a package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On "make source", just download the required sources, and do not
build the entire toolchain. This requires a new patch against
crosstool-NG (got from upstream).
The "uclibc-source" rule requires an installed and configured
crosstool-NG, so it has to be after the variables declaration.
For consistency, move down the main rule "uclibc".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added the CodeSourcery uCLinux/uClibc toolchain for the SH2A big
endian devices.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
0.9.29 doesn't seem to build anymore with the toolchain versions in BR
and is very old, so remove it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though MAXARGS 1000 seems large, it wasn't enough for at least
QtWebKit package. This new version does not have any predefined limits.
Closes#3907
Many thanks to Thomas for tracing the source of the build error.
[Peter: Return rather than abort()]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Reported-by: Thomas Björk <thomas.bjork@home.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
