Only enabled on a subset of known-working architectures.
It fails to build on some archs, like blackfin.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- Add comment about the Blackfin exception.
- Propagate the Blackfin exception to the Config.in comment.
- Fix the license, it is the LGPLv2.1+ *with* the unRAR restriction.
- Use $(INSTALL) -D -m 0755 to install the binary instead of cp.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OMXplayer uses openMAX on the RPi to play videos with hardware
acceleration.
Compared to using a gstreamer pipe, OMXplayer uses a complete
"tunnel-mode", in which the video is piped (after demuxing) into the
hardware, all the way down to the display, whereas gstreamer composes
the video using the eglgles sink, which uses mem-to-mem copies.
So, when playing a locally-stored 1080p video, OMXplayer averages 20%
(with peaks up to ~30%, depending on the complexity of the video) CPU,
while gstreamer bursts up to 40+% when playing 720p and totally chokes
on a 1080p video; all on an non-overclocked RPi-1.
Note that we have to depend on rpi-userland. rpi-userland is a GLES/EGL
provider, so it can't be selected (as all providers of a virtual package
can't).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add a depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Free software library that interfaces with selected Z-Wave PC
controllers, allowing anyone to create applications that manipulate and
respond to devices on a Z-Wave network, without requiring in-depth
knowledge of the Z-Wave protocol
[Peter: also pass DOXYGEN=, add _MAKE_OPTS and use for build+install]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package introduces batman-adv, a kernel module implementation of
the B.A.T.M.A.N. IV and V mesh network routing protocols.
While batman-adv exists in the mainline kernel tree, it can also be
built as an external out-of-tree module. This package adds the
flexibility to chose a more up to date version of the module than exists
in the official tree, and also allows for compilation against kernels
without batman-adv in-tree support.
https://www.open-mesh.org/projects/batman-adv/
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas:
- remove "default n", since it's the default
- fix indentation of Config.in help text
- license is GPLv2, not just GPL
- remove variable BATMAN_ADV_MAKE_OPTS, name it directly
BATMAN_ADV_MODULE_MAKE_OPTS as this is what is expected by the kernel
module infrastructure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: use complete license name in <pkg>_LICENSE, i.e "VOSTROM Public
License for Open Source".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- make python-flask a runtime dependency only, as noticed by Yegor
Yefremov.
- use setup.py as the license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the latest 2.12.x upstream stable branch.
Both 2.4.x and 2.12.x can live side-by-side, however only the latest
stable branch/releases are security-maintained, so add it unslotted.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package allows to build the fastboot and adb host utilities,
which can be used to interact with target devices implementing one of
these protocols.
The work behind the host utilities was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
The package also allows to build fastboot, adb and adbd daemon for the
target.
Regarding adbd, the target is required to have the FunctionFS USB Gadget
configuration. Then the following commands enable the use of adb:
# modprobe g_ffs idVendor=0x18d1 idProduct=0x4e42 \
iSerialNumber="buildroot"
# mkdir -p /dev/usb-ffs/adb
# mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
# adbd &
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- update on top of master.
- fix Config.in.host prompt, it should have been "host android-tools"
and not just "android-tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libusbgx is a C library encapsulating the kernel USB gadget-configfs
userspace API functionality.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas: adjust license information, there are included examples that
are installed by default, licensed under GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"A better i7 (and now i3, i5) reporting tool for Linux."
i7z can print out the C-states and temperature for i3, i5 and i7 based
Core processors from Intel (including Nehalems, Sandy Bridge and Ivy
Bridge).
https://github.com/ajaiantilal/i7z
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flannel is a virtual network that gives a subnet to each host for use
with container runtimes.
Cc: Brandon Philips <brandon.philips@coreos.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Don't select BR2_PACKAGE_HOST_GO since this option was removed.
- Take into account the rename of BR2_PACKAGE_GO_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS.
- Rewrap Config.in help text, it was slightly too large.
- Don't use the github function (the link was anyway incorrect), but
instead a direct link to the tarball, since the tarballs are
uploaded by the maintainers.
- Update the hash accordingly.
- Use $() to reference make variables and not ${}.
- Call the go compiler from $(HOST_DIR)/usr/bin, rather than from
HOST_GO_ROOT.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds freeswitch without any configured modules and with a
minimal set of non-optional dependencies. All other dependencies and
modules will be added by further patches in this series.
Please note that freeswitch source repo bundles some libraries which
are also available as buildroot packages. The freeswitch build system
does not allow to use system libraries in these cases:
apr, apr-util, libsrtp, libvpx, libyuv, sofia-sip, tiff
The reason are patches to these packages by the freeswitch project
which are not yet upstream. There is an open JIRA report for this
situation:
https://freeswitch.org/jira/si/jira.issueviews:issue-html/FS-353/FS-353.html
More historic infos can be found here:
http://article.gmane.org/gmane.comp.telephony.freeswitch.devel/2715https://freeswitch.org/the-missing-link/
In the 1.6.7 version bump libvpx & libyuv were also moved in-tree:
febe0f8dac44da905b4f
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
add python to MySQL connection software, written in pure python
Signed-off-by: Steve Calfee <stevecalfee@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aer-inject allows to inject PCIE AER errors on the software level into
a running Linux kernel. This is intended for validation of the PCIE
driver error recovery handler and PCIE AER core handler.
Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
[Thomas:
- tweak commit log
- rewrap Config.in help text
- remove useless AER_INJECT_MAKE_OPTS variable, use
TARGET_CONFIGURE_OPTS directly
- add missing newline at end of .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Raptor is a free software / Open Source C library that provides a set of parsers
and serializers that generate Resource Description Framework (RDF) triples
by parsing syntaxes or serialize the triples into a syntax.
http://librdf.org/raptor/
Patch added in the package:
0001-configure.ac-remove-conditional-lib-inclusion.patch
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Nitin Mendiratta <nitin.mendiratta@rockwellcollins.com>
[Thomas:
- add else clause for the three optional dependencies, as suggested
by Baruch.
- fix they yajl optional dependency, as noticed by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package consists of scripts that setup cgroups at boot without
doing any cgroup management or classification of tasks into cgroups
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
[Thomas:
- rename to cgroupfs-mount to match upstream
- add proper hash, since hashes should be added for github sourced
packages
- fix minor typos in the init script
- fix the license file information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was added to the networking category close to connman for the ability
to tweak connman features without going around (i.e. add support for
wifi and so on).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For wayland 1.10+ they're split from wayland core and required by
weston.
Hide it behind the wayland package since it's useless independently even
though it can be "built" and installed.
And it makes no sense to install to target since they are DTDs used at
build-time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it outside x11r7 scope since it can be built without it with a few
patches (sent upstream via github pull request).
Motivation is simple, it's a dependency for newer gtk3 versions which
can work with a wayland or broadway backend, and having a full x11 stack
is pointless for that scenario.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: split the first patch into four separate patches, since
that's how they were submitted upstream.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for a year now so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated for a year now so remove it.
[Peter: drop !samba dependency from samba4]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's not really a networking tool (if everything that does something on
the network would be called a networking tool, we wouldn't have much
else).
Since we don't really have an appropriate menu for it, put it in
Miscellaneous.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: drop unneeded wchar dependency]
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Taskwarrior is a task management suite of tools. Taskd is the
synchronization server for it.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
[Thomas:
- use 'depends on' for BR2_USE_MMU, and add a comment indicating that
the dependency is due to the use of fork()
- use 'depends on' for BR2_USE_WCHAR, and add a comment indicating
that the dependency is due to gnutls and util-linux.
- add a hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fetch a patch fixing autoreconf call.
Patch already sent and merged upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gmrender-resurrect is UPnP (DLNA) renderer based on gstreamer.
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
[Thomas:
- Fix gstreamer related dependency comments to "gstreamer1 ->
libglib2", as suggested by Arnout.
- select BR2_PACKAGE_GST1_PLUGINS_BASE as a run-time dependency, as
suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All modules are always enabled when their dependencies are satisfied.
tcl doesn't work because the tclConfig.sh installed by our tcl package
is wrong: it adds -I/usr/include.
perl doesn't work out of the box, I didn't investigate.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The MSR Tools project provides utilities to access x86 processor MSRs
and CPU ID directly.
https://01.org/msr-tools
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Thomas:
- rewrap Config.in help text
- use $(TARGET_MAKE_ENV) when calling $(MAKE).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
[Thomas: use <pkg>_STRIP_COMPONENTS = 2, which allows to get rid of
the <pkg>_SUBDIR usage, and make things a bit simpler.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
multicat is a simple and efficient multicast and transport stream manipulation
tool.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package was added in error when updating ejabberd dependencies. It
is not used.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for gr-osmosdr - a GNU Radio block for interfacing with various
radio hardware.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas:
- instead of selecting BR2_PACKAGE_GNURADIO, use "depends
on". Indeed, it is fairly obvious for a user that some GNURadio
extensions require GNURadio to be built. And it avoids the need to
replicate all the complex dependencies of GNURadio.
- remove comment that the Python support needs Python. It's fairly
obvious, no?
- remove comment about the thread dependency of
BR2_PACKAGE_GR_OSMOSDR_RTLSDR, since anyway GNURadio already need
threads. Yes, we sometimes still add such dependencies, but in the
case of GNURadio, it's highly unlikely that GNURadio will ever
loose the thread dependency.
- use "NO" instead of "no" as the value for
GR_OSMOSDR_SUPPORTS_IN_SOURCE_BUILD since we always use upper-case
letters for the value of such booleans.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a library for using the i.MX6 VPU. It is an alternative to
libfslvpuwrap, hosted on Github, and has an API that features several
improvements over libfslvpuwrap, which include:
* User-defined context information associated with input frames, which
is passed on to corresponding output frames (to be able to identify
which input frame produced which output frame)
* Groundwork for future DMA-BUF/BMM/ION/CMA allocator integration, using
file descriptors instead of physical addresses
* Indicators for when it is safe to try to decode frames, which is
critical in multi-threaded playback cases
* Simplified, higher-level JPEG en/decoding API, based on the VPU MJPEG
codec; useful for picture viewing without the extra boilerplate for
VPU-based en/decoding
Changelog 0.10.0 -> 0.10.1:
- add debian packaging files
- update waf to version 1.8.16
- add workaround in wscript to prevent stale pkg-config .pc files
- fix memory leak by adding missing IOFreeVirtMem() call in vpulib
backend
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/e519d6chttps://github.com/Freescale/meta-fsl-arm/commit/1dd6a5b
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Font Awesome is a full suite of 605 pictographic icons for easy
scalable vector graphics on websites.
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
[Thomas: fix misc minor typos.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is used by the newer versions of the ejabberd dependencies.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python-crossbar package was not added at the right location, so
this commit fixes the alphabetic ordering.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- Remove dependency on having .py files, since building/testing with
.pyc files only was successful.
- Remove the "# runtime" comment for all dependencies, and only
mention it once before all "select".
- Add missing dependencies on: BR2_PACKAGE_PYTHON_PYCPARSER and
BR2_PACKAGE_PYTHON_LMDB.
- Use AGPLv3 for the license instead of AGPL3.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: remove dependency on having .py files, since it builds fine
and imports fine with .pyc files only.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- remove python-six from the build dependencies, it is only a runtime
dependency
- add host-python-cffi in the build dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package provides the binary user-space components for the ARM Mali
Midgard T76X GPU.
Note that this package requires a kernel with the ARM Mali Midgard GPU
Kernel Drivers enabled.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license information: it is either Apache-2.0 *or* BSD-3c
- add the LICENSE file to the list of license files, since it is the
one that explains that the license is either Apache-2.0 or BSD-3c.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- switch to Github, which has a LICENSE file. The issue was reported
upstream: https://github.com/dw/py-lmdb/issues/108. Then added the
<pkg>_LICENSE_FILES variable.
- bump version to 0.89 (instead of 0.88)
- indicate the proper license, following the SPDX code for the
OpenLDAP 2.8 license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for building NVME utility - a utility for interacting with
standard NVM Express (optimized PCI Express SSD interface) devices.
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- remove excessive empty new line at the end of Config.in
- specify BSD-3c as the license, since it's the variant being used,
and it's more specific than just BSD.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- rename the .mk file to carry the proper name
- rewrap Config.in help text to use the proper length and avoid a
trailing space
- remove excessive empty new line at the end of Config.in
- specify BSD-3c as the license, since it's the variant being used,
and it's more specific than just BSD.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- rewrap Config.in help text, lines were slightly too long
- remove excessive empty line at end of Config.in
- specify BSD-3c as the license, since BSD is not specific enough.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lldpd is a 802.1ab implementation (LLDP) to help you locate neighbors
of all your equipments.
LLDP is an industry standard protocol designed to supplant proprietary
Link-Layer protocols such as EDP or CDP. The goal of LLDP is to
provide an inter-vendor compatible mechanism to deliver Link-Layer
notifications to adjacent network devices.
https://vincentbernat.github.io/lldpd/
[Thomas:
- add depends on BR2_USE_MMU, since fork() is used
- rewrap Config.in help text]
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for a year now, so remove it.
While at it also remove the BR2_DEPRECATED_SINCE_2015_02 since it's now
unused.
And change the efl gif text to refer to giflib rather than libungif
which is what's used since it was deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mraa provides a unified interface for IO on Galileo, Edison,
Raspberry Pi and others.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PyXML is bitrotten and obsolete. You'll find the functionality it
previously provided is now included in the Python standard library.
So no need to keep this package in Buildroot anymore.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compiled and tested on arm (beaglebone black), aarch64 (qemu),
i386 (qemu) and x86_64 (qemu).
[Peter: limit to supported archs, disable -Werror]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libdvbpsi is a library used by vlc for decoding MPEG TS
[Thomas:
- add missing Config.in comment about the thread dependency.]
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix commit title
- change libusb back to a mandatory dependency, since even though
there is a --disable-libusb option, it has no effect, and the code
fails to build due to missing libusb.h
- add hash file, noticed by Arnout
- remove host-perl dependency, noticed by Arnout
- rewrap Config.in help text, noticed by Arnout.]
Signed-off-by: Juha Rantanen <juha@codercoded.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit e84fd04e88, Yann added a
Config.in symbol for netbsd-queue in a brand new Config.in file. But
that Config.in file was never included anywhere, making it somewhat
useless.
Let's include it under Libraries -> Other, even if its actual
inclusion location doesn't matter much since it's just a hidden
Config.in option anyway.
Fixes:
http://autobuild.buildroot.org/results/d23/d23a1c51c4d7a260364aeef576fdf5a407abc2f6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- addition of 'depends on BR2_arm' as suggested by Yann.
- addition of a comment in the Config.in help text that says that
this library is a pure abomination.
- fix the hash, since apparently upstream changes the released
tarballs after they are published.
- fix license, it's GPLv2, not GPLv2+.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- provide only libmongoose.a
- rework package description
[Peter: move under Libraries->Networking]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the mbed TLS library, formerly known as PolarSSL.
The 2.0+ version can live side-by-side with polarssl since it was
renamed, hence can be added with no conflict.
Use the Apache-2.0 license variant since it's somewhat more flexible,
the codebase is the same as the GPLv2 variant, just copyright
headers/license file changed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xdotool is a command-line X11 automation tool.
http://www.semicomplete.com/projects/xdotool
[Thomas:
- fix <pkg>_LICENSE, as noticed by Baruch
- use $(TARGET_MAKE_ENV).]
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v1 -> v2:
- use github helper (thanks to Jörg Krause)
Changes v2 -> v3:
- add c++ dependency (suggested by Thomas Petazzoni)
- fix linking problem with builtin zlib (linking code
with/without '-fpic' compiled, see e.g. [2]), workaround by selecting
buildroot zlib package (failure detected by Thomas Petazzoni [2])
[1] https://cmake.org/pipermail/cmake/2006-March/008482.html
[2] http://lists.busybox.net/pipermail/buildroot/2015-December/146859.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- move from Libraries/Crypto to System tools in menuconfig
- add patch to fix build with uClibc
- use 'select' for openssl rather than a 'depends on'
- propagate trousers dependencies
- add <pkg>_LICENSE and <pkg>_LICENSEFILES
- link against libiconv when needed, fixing !locale builds
- explicitly disable pkcs11 support, since it is not handled by
tpm-tools.mk currently.]
Signed-off-by: Al West <al.west@v-nova.com>
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use a 'select' instead of a 'depends on' for openssl
- select libiconv when locale support is not available, otherwise the
build fails due to missing iconv.h
- disable on BR2_STATIC_LIBS configurations as it doesn't build. It
could be made to build by patching the trousers Makefile.
- add missing dependency on thread support in the toolchain
- add Config.in comment about the thread and dynamic library
dependencies.
- add missing <pkg>_LICENSE and <pkg>_LICENSE_FILES variables.]
Signed-off-by: Al West <al.west@v-nova.com>
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Chocolate Doom is a set of conservative source ports for Doom, Heretic,
Hexen and Strife, with a philosophy of preserving the look, feel, and
bugs of the vanilla versions of each.
http://www.chocolate-doom.org
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: use "br" as the version suffix instead of "-br" so that the
final version string is "0.5-br" and not "0.5--br".]
Signed-off-by: Viacheslav Volkov <sv99@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List all jQuery plugins in a dedicated menu and remove
uneeded jQuery selection.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A daemon which handles passwd, group and host lookups for running
programs and caches the results for the next query. This package is
intended to replace glibc nscd. Presently, glibc nscd is not installed
by Buildroot.
unscd depends on glibc because it relies on glibc function
__nss_disable_nscd.
nscd.conf is taken from glibc with unused configurations removed.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested on i.MX6 using NFS mounts only. Not tested with DAS mounts as
of this commit.
[Thomas:
- remove the "# rpcbind" comments on the thread and mmu dependencies,
since we don't select rpcbind. The thread and mmu dependencies are
still needed though, since autofs uses pthread_*() functions and
fork().
- Remove "Requires a toolchain with native RPC." in the Config.in
help text and instead add a proper Config.in comment about the
thread and RPC dependency.
- Add patch to fix building with uClibc, taken from OpenEmbedded.]
Signed-off-by: Jonathan Ben Avraham <yba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- update to the latest github version, which has a number of
fixes/improvements compared to the latest tag.
- add a patch to fix the build of the kernel module with recent
kernel versions (>= 3.19).
- use $(INSTALL) -D with a full destination path.
- rewrap Config.in help text, lines were too long.]
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for the Openbox Windows Manager.
[Thomas:
- don't mention MMU in the Config.in comment.
- wchar was forgotten in the Config.in comment.
- the dependency of the comment on thread should be "depends on
!BR2_TOOLCHAIN_HAS_THREADS" so that the comment is shown when
thread support is *not* available.
- add missing select of BR2_PACKAGE_XLIB_LIBXFT and
BR2_PACKAGE_XLIB_LIBXRENDER which are needed for pango to have xft
support, otherwise the build fails with "configure: error: Package
requirements (pango >= 1.8.0 pangoxft >= 1.8.0) were not met:"
- remove useless empty newline in the hash file
- add missing dependency on host-pkgconf, which is needed since
the configure.ac uses PKG_CHECK_MODULES.]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package luvi version v2.3.5.
luvi extends LuaJIT with asynchronous I/O and several optional modules to run
Lua applications and build self-contained binaries.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allow to keep backward compatibility with older
defconfig files that used BR2_PACKAGE_EFL.
Don't add Config.in.legacy entry for libefl since it's
not part of any Buildroot release.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the list move the last remaining package
in package/efl subdirectory to package/ directory.
- move the efl dependency to libefl.
- Set LIBEFL_VERSION with the version number directly.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upstream name is elementary so use it.
Even if this package provide libelementary.so, it also provide
elementary_codegen, elementary_run and elm_prefs_cc tools.
Add a legacy entry.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the list the two remaining packages in
package/efl subdirectory will be moved to package/
directory.
- Add the efl dependency to libelementary.
- Set LIBELEMENTARY_VERSION with the version number
directly.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move to baseline package/
It doesn't really require x11r7 infrastructure and is in fact needed by
libepoxy which can be made x11r7-less.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- replace patch 0001 fixing autoreconf by a simpler patch that simply
drops the -Wall and -Werror flags passed to automake.
- reformat the two patches using Git
- drop the "uclibc || glibc" dependency inherited from libv4l, since
libv4l has now been fixed to build on musl.
- drop the hook work arounding a build issue around man pages, and
replace by a patch that completely disables the build/installation
of documentation.
- change license to LGPLv2.1+, as noted in the COPYING file.
- drop --enable-shared=yes, since it is already passed by the
autotools-package infrastructure]
Signed-off-by: Viacheslav Volkov <sv99@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename from comix_cursors to comix-cursors
- change prompt from comix to comix-cursors in order to match the
package name
- use <pkg>_STRIP_COMPONENTS instead of overriding the extract
commands.
- the license is GPLv3 according to the project website.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename from obsidian_cursors to obsidian-cursors
- change prompt from obsidian to obsidian-cursors in order to match
with the package name.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: change <pkg>_LICENSE to match the license identifier used for
other packages, such as 'liberation'.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for these new Kodi addons:
kodi-screensaver-asterwave
kodi-screensaver-cpblobs
kodi-screensaver-matrixtrails
kodi-screensaver-planestate
kodi-visualisation-fountain
[Thomas:
- don't pass LIBSOIL_CFLAGS since this variable no longer exists.
- pass TARGET_CONFIGURE_OPTS on the right hand side of make for the
install steps, like was done for the build step.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove dependency on musl, since libv4l can now be built without
musl
- add missing Config.in comment for the toolchain dependencies
- add hash file.
- rework commit log.
- expand Config.in help text.
- depend on jpeg and not libjpeg, as noticed by Arnout.
- fix LICENCE_FILE -> LICENSE_FILES typo.]
Signed-off-by: Viacheslav Volkov <sv99@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A backport of recent additions to the 'collections.abc' module.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This library brings functools.singledispatch from Python 3.4
to Python 2.7.x.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libgdiplus is an open source implementation of the GDI+ API.
[Thomas: remove trailing whitespace.]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- pass -DBUILD_TOOLS_DOCS=OFF in <pkg>_CONF_OPTS
- use -DBUILD_SHARED_LIBS and -DBUILD_STATIC_LIBS to enable/disable
the creation of shared/static libraries depending on the
configuration.
- remove trailing spaces.]
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename from libgtkmm30 to gtkmm3.
- add libsigc dependency.]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename to atkmm
- move next to atk in menuconfig
- add dependency to libsigc]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename to pangomm.
- move next to pango in menuconfig.
- add dependency to libsigc.]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename package from libcairomm to cairomm in order to match
upstream name.
- put the package next to cairo in menuconfig
- add missing dependency on libsigc
- add missing depends on BR2_INSTALL_LIBSTDCPP
- fix license: it's LGPLv2+, not LGPLv2.]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for new kodi-pvr-hdhomerun package.
[Thomas: use TARGET_MAKE_ENV, other minor tweaks.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch, that fixes find_library() issue on the systems
without library cache.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove bogus comment about thread dependency.]
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As for expedite package, there is no advantage for efl related
packages to share the same version number anymore
(except for efl and libelementary).
Also, we usually do not have a sub-directory for a family of related
packages which doen't share the same version number, so move
libevas-generic-loaders to package directory.
Libevas-generic-loaders appear now in "Libraries" -> "Graphics" in
the Kconfig menu.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no advantage for efl related packages to share the same version
number anymore (except for Efl and Elementary).
Here are the version number used for the 1.15 stable release:
EFL 1.15.2
Elementary 1.15.2
Emotion Generic Players 1.15.0
Evas Generic Loaders 1.15.0
Python-EFL 1.15.0
Also, we usually do not have a sub-directory for a family of related
packages which don't share the same version number, so move expedite
to the package directory. Expedite now appears in the
"Graphic libraries and applications (graphic/text)" in the Kconfig menu.
In a followup patch, expedite will be downloaded directly from the 1.15
branch in the git repository since there is no new tarball release after
1.7.0.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Name Service Switch (NSS) module that allows your LDAP server to provide
user account, group, host name, alias, netgroup, and basically any other
information that you would normally get from /etc flat files or NIS. It
also provides a Pluggable Authentication Module (PAM) to do
authentication to an LDAP server.
[Thomas:
- bump to version 0.9.6
- use --disable-<foo> rather than --enable-<foo>=no.
- fix license information: there is no LICENSE file, it is named
COPYING.]
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add hash file
- fix license information: use comma as a separator in
<pkg>_LICENSE, and htable is under LGPLv2.1+ and not GPLv2.1+
(which doesn't exist)]
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
CC: Baruch Siach <baruch@tkos.co.il>
CC: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package contains some simple command line tools to help using Linux
spidev devices.
https://github.com/cpb-/spi-tools
The included version is based in a sha1 and not a tagged version as the
current master branch contains autotools support for build but there is
no tagged version with autotools support yet.
The only other quirk with the recipe is related to the VERSION define
which is normally obtained in build time via git for this package, but
that would fail within Buildroot as the package build is normally not
performed inside a git repository.
To work around that, I have added a hook which will substitute change
the VERSION to match that of the Buildroot package.
I have tested this package in an ARM target with a custom SPI device.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently have a package named "infozip" for Info-Zip's Zip.
With the upcoming addition of a package the Info-Zip's UnZip the name
is becoming ambiguous. Rename it to the more specific name "zip".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Jan Pedersen <jp@jp-embedded.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use BR2_INIT_SYSTEMD instead of BR2_PACKAGE_SYSTEMD for the
libgudev handling. This is consistent with what we do in libmbim,
modem-manager and network-manager. Only udisks is diverging from
this by using BR2_PACKAGE_SYSTEMD.
- Fix the license info: it is GPLv3 *or* BSD-3c *or* the specific
HIDAPI license. Added LICENSE-orig.txt to LICENSE_FILES.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add comment in Config.in to explain why this package depends on
glibc, and specifically why it doesn't build for uClibc and musl.
- add hash file.
- add 'COPYING' to the list of LICENSE_FILES
- add themissing <pkg>_DEPENDENCIES variable in the .mk file, to make
sure dependencies are built before netsniff-ng.
- add comment in the .mk file explain why we're using the
generic-package infrastructure even if the build procedure is
essentially ./configure, make, make install.
- fix indentation in NETSNIFF_NG_CONFIGURE_CMDS.]
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a new package for the fastd "Fast and Secure Tunneling Daemon"
which was developed for the Freifunk Gluon project in the first place.
It includes a patch to allow cross compiling with toolchains without
LTO support which fails with the unpatched version due to some ugly
cmake hacks in fastd v17, details in the patch.
[Thomas:
- Get rid of trailing spaces in Config.in
- Remove the BR2_PACKAGE_FASTD_OPENSSL, and simply rely on
BR2_PACKAGE_OPENSSL
- Remove -DWITH_CAPABILITIES=TRUE, since libcap support is anyway
mandatory.
- Use ON/OFF instead of TRUE/FALSE.]
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is a small library used for the Freifunk Gluon project
and will be used by other upcoming packages.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove dependency on libglib2, as it is not tested directly
by yad's configure script, and is anyway guaranteed to be available
since yad depends on gtk2 or gtk3, which both require libglib2.]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gauche is an R7RS Scheme implementation developed to be a handy script
interpreter, which allows programmers and systemadministrators to write
small to large scripts for their daily chores. Quick startup, built-in
system interface, native multilingual support are some of its goals.
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Irssi is a terminal based IRC client for UNIX systems.
http://irssi.org/
[Thomas: use alternate site since the official site is currently
down.]
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
x265 is a H.265 / HEVC video encoder application library, designed to encode
video or images into an H.265 / HEVC encoded bitstream.
http://x265.org
[Peter: use positive logic for CLI option]
Signed-off-by: Thijs Vermeir <thijsvermeir@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ranger is a console file manager with VI key bindings. It provides a
minimalistic and nice curses interface with a view on the directory hierarchy.
It ships with "rifle", a file launcher that is good at automatically finding
out which program to use for what file type.
http://ranger.nongnu.org
Signed-off-by: Thijs Vermeir <thijsvermeir@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Romain:
- Wrap Config.in help text at 72 columns.
- Move sdl2 package after sdl modules in Config.in. (Arnout)
- Explicitly disable dbus and wayland.
- Remove double underscore (SDL2__*).
- Unify autotools options to use --enable/--disable.
- Use x-includes and x-libraries to avoid path poisoning.
- Remove xlib_libXrender, xproto_inputproto and xproto_scrnsaverproto
dependencies since the build system doesn't depend on them.
- Add Xlib_libXi, xlib_libScrnSaver and xlib_libXxf86vm dependencies.
- Handle autotools options (--enable/--disable) for each X11
dependencies.]
[Thomas:
- Minor tweaks to Config.in
- Addition of hash file.
- Addition of SDL2_CONFIG_SCRIPTS, as suggested by Vincent Stehlé.]
Signed-off-by: Guillaume GARDET <guillaume.gardet@oliseo.fr>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
syslog-ng is an enhanced log daemon, supporting a wide range of input
and output methods: syslog, unstructured text, queueing, SQL & NoSQL.
[Thomas:
- Rewrap Config.in.help text
- Pass --pidfile option when starting syslog-ng so that its PID file
is created in /var/run/syslog-ng.pid, which allows
start-stop-daemon to actually stop syslog-ng. Without this,
S01logging was not able to stop syslog-ng.
- Pass the executable path at stop time in S01logging, so that
start-stop-daemon can check we're not incorrectly stopping
something completely different.
- Add busybox as a dependency of syslog-ng if busybox is enabled,
since we want to override Busybox's S01logging init script.
- Simplify the python condition, since python and python3 are
mutually exclusive.
- Rewrap the comment above SYSLOG_NG_FIXUP_CONFIG.]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
DVBlast is a simple and powerful MPEG-2/TS demux and streaming
application.
[Thomas:
- add missing hash file.
- rewrap Config.in help text
- remove unneeded "DVBLAST_INSTALL_TARGET = YES", since this is the
default behavior
- pass TARGET_MAKE_ENV in the environment when calling make.
- use TARGET_CONFIGURE_OPTS instead of just CC/LD.]
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BiTStream is a set of headers to ease processing of mpeg ts
streams. It is used by dvblast.
[Thomas:
- add missing hash file.
- add missing BITSTREAM_LICENSE_FILES information.
- rewrap Config.in help text.
- use lowercase name for the package in the comment header in
bitstream.mk.]
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
eventlog is a library for creating structured events from
applications, and is the workhorse behind syslog-ng's own messages.
[Thomas:
- fix alphabetic ordering in package/Config.in, as noticed by
Vicente.
- rewrap Config.in help text and add some URL as a reference (though
the eventlog project doesn't seem to have a real web page)
- remove useless slash at the end of EVENTLOG_SITE
- make the license info more specific: it's a BSD-3c license
- add a hash file.]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PCI support needs to be checked since this driver is based
on it. Otherwise the build fail with:
#error "This driver requires PCI support to be available"
But this message is concealed by several occurrence of this
one:
error: implicit declaration of function 'pci_find_bus' [-Werror=implicit-function-declaration]
[Thomas:
- fix minor typo in Config.in: s/Enthernet/Ethernet/
- license is "GPLv2, BSD-3c", not "GPLv2 or BSD-3c"
- remove IQVLINUX_PCI_CHECK, until a proper generic solution is
implemented.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- replicate the ffmpeg "depends on" related to the broken NIOS2
toolchains to the BR2_PACKAGE_SQUEEZELITE_FFMPEG option.
- use the github helper function.
- add hash file.]
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add patch to fix autoreconf issue, and use LIQUID_DSP_AUTORECONF =
YES instead of an horrible hack calling aclocal/autoconf manually.
- use the github macro instead of hand-coding <pkg>_SITE and
<pkg>_SITE_METHOD. This allows to remove <pkg>_SITE_METHOD
entirely.
- use a full hash as the <pkg>_VERSION
- remove trailing whitespace everywhere.
- use one single assignment of LIQUID_DSP_CONF_OPTS
- fix the comment about the eglibc/musl dependency (it was only
mentioning eglibc, and the condition was inverted)
- add the musl/glibc dependency on the package option itself
- make the package depend on dynamic library support, since the
makefile unconditionally builds a shared library.
- add hash file.]
Signed-off-by: Guillaume William Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package media-ctl is out-dated, source (and developement) have been moved
to v4l-utils since June 2014. Up-to-date version is available in
the libv4l package (BR2_PACKAGE_LIBV4L/BR2_PACKAGE_LIBV4L_UTILS).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ZXing was hosted on Google Code, which is a closing. The current link
was already redirecting to the github repo.
But upstream is no longer supporting the cpp bindings, it's now a Java
library/application.
A fork has been created from the latest cpp source of the original
upstream. So this commit creates a new package, zxing-cpp, and adds
Config.in.legacy handling for the old zxing pakcage that is removed.
[Thomas:
- add a patch that improves the CMakeLists.txt file to add
installation rules. This allows to remove the manual installation
logic from zxing-cpp.mk.
- make libiconv a normal optional dependency. No need to involve
BR2_ENABLE_LOCALE in the condition, since libiconv can only be
enabled when !BR2_ENABLE_LOCALE.
- bump to the latest upstream version.
- add hash file.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed by Kodi 16.x-Jarvis:
6f8171f539
[Peter: needs GCC >= 4.7 for C+11, no need to install in target,
Drop TARGET_CONFIGURE_OPTS, add TARGET_CXXFLAGS, wrap long lines]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Inspired by jMock, EasyMock, and Hamcrest, and designed with C++'s
specifics in mind, Google C++ Mocking Framework (or Google Mock for
short) is a library for writing and using C++ mock classes.
Google Mock:
* lets you create mock classes trivially using simple macros,
* supports a rich set of matchers and actions,
* handles unordered, partially ordered, or completely ordered
expectations,
* is extensible by users, and
* works on Linux, Mac OS X, Windows, Windows Mobile, minGW, and
Symbian.
http://code.google.com/p/googlemock/
There are both host and target packages. The target one has include
files required to compile the tests and the static libraries required
to link/run them. The host package installs gmock_gen, a Python script
used to generate code mocks.
Notice that GMock 1.7.0 requires the Python 2 host package even if
Python 3 is selected as a target package.
Signed-off-by: Marcelo Barbosa <marcelo.barbosa@datacom.ind.br>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
swupdate provides a reliable way to update the software on an embedded system.
Note that swupdates has a reworked Kbuild/Kconfig system. It has now support
for the 'option' and 'env' symbols as well for the 'savedefconfig' target.
This makes dependency handling much easier. We're now able to pass which
dependencies are available through the environment, as suggested by Arnout
Vandecappelle [1].
In previous version of this patch we had a configuration setting where all
package dependencies except Lua were selected by default. This has changed with
v7 as we are now able to pass dependencies to the swupdate build system through
the environment. For useful operation swupdate requires a parser which depends
by default on libconfig, but can be replaced by a json-c or Lua parser.
To provide a reasonable firmware update system we enable the embedded webserver
based on mongoose (also see notes about mongoose below), a parser as stated
above and a handler for raw NAND or NOR flash.
The user can modify this configuration by selecting the appropriate dependencies
before running `make swupdate-menuconfig`. The help text contains information
about which packages may be of interest for the user.
The embedded web server requires a website for proper operation. We install the
included website by default, however the user may choose to install a custom
website on the post-build scripts.
Note, swupdate includes some old versions of mongoose and lsqlite3:
- mongoose is version 3.8 from year 2013
- lsqlite3 is version 0.8 from year 2011
Currently, swupdate does not provide a way to replace these with external
packages.
This patch is based on a WIP version submitted by Romain Naour, commented by
Arnout Vandecappelle [2].
[1]
http://lists.busybox.net/pipermail/buildroot/2015-March/122981.html
[2]
https://patchwork.ozlabs.org/patch/401270/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In favor of imx-kobs maintained by Freescale.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- tweak description of the patch
- turn the doc/test removal hook as a post patch hook rather than a
pre-configure hook.]
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libuv bindings for LuaJIT and Lua.
[Thomas:
- Move the package to the sub-menu of Lua modules.
- Remove no longer needed dependency on
BR2_PACKAGE_HAS_LUAINTERPRETER.
- Propagate dependencies of libuv (mmu, !static, threads)
- Update to upstream version 1.7.4-4.
- Add hash file.]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"xxHash is an extremely fast hash algorithm, running at RAM speed
limits."
[Thomas:
- tweak commit log title
- add correct license and license files information, using the
suggestion from Yann E. Morin
- add $(TARGET_MAKE_ENV) in the environment in the build step.]
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Micro Python is a lean and fast implementation of the Python 3
programming language that is optimised to run on a microcontroller.
[Thomas: fix minor typo in Config.in noticed by Vicente.]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GUPnP A/V reference manual https://developer.gnome.org/gupnp-av/
says latest available stable version is 0.11.2 but there are
couple of bug fixes releases after that in same series. It looks
like manual is not up-to-date. Use latest version 0.11.6
of series 0.11 instead.
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also update legacy as well.
And remove the BR2_DEPRECATED_SINCE_2014_08 symbol since it's unused
now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the sawman package, since the corresponding
functionality has been merged in DirectFB itself since 1.7.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the divine package, since the corresponding
functionality has been merged in DirectFB itself since 1.7.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow the `dos2unix` utility to be built and installed on the target
system.
[baruch: properly handle target gettext]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package was previously in the 'Development' section
Signed-off-by: Francesco Nwokeka <francesco.nwokeka@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libssh2 and libssh both implement SSH and provide a library API for apps.
Both support SSH, SFTP, auth, channels etc. Both are 25K-30K lines of code.
[libssh2 vs libssh - A comparison]
http://www.libssh2.org/libssh2-vs-libssh.html
[Peter: add sha256 hash, fix typo in help text]
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ebf3a6117c (package/libyuv: new package, 2015-08-11) added a
reference to the libyuv Config.in file at the wrong place. Fix that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A tool for extracting OOPS/panic logs from MTD.
Tested using arm-buildroot-linux-gnueabihf toolchain.
[Thomas:
- use sp-oops-extract instead of sp_oops_extract as the Config.in
prompt and in the .mk file comment
- remove @ in front of the build and install commands.
- use $(TARGET_CONFIGURE_OPTS) instead of manually passing CC, AR,
LD, CFLAGS and LDFLAGS.]
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- include package/ibrdtn-tools/Config.in from package/Config.in
- fix the Config.in option name: we don't use - in option names, it
should be replaced by _. Also do the same change in the .mk file.
- from Config.in, don't select BR2_PACKAGE_IBRDTND (it's not a
dependency of ibrdtn-tools), but instead select
BR2_PACKAGE_IBRCOMMON and BR2_PACKAGE_IBRDTN.
- in the Config.in file, fix the comment dependency logic (we want
the comment to be shown when either thread support *or* C++
support is missing)
- add hash file.
- do not install to staging, since the package does not install any
library
- remove IBRDTN_TOOLS_SOURCE variable, since it's equal to the
default value
- add ibrcommon, ibrdtn and host-pkgconf as mandatory dependencies,
and handle libdaemon and libarchive as optional dependencies.
- remove custom INSTALL_STAGING_OPTS and INSTALL_TARGET_OPTS:
automake is used, so there's no need for any hack.]
Signed-off-by: Tom Sparks <tom_a_sparks@yahoo.com.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add package to package/Config.in
- remove "select" on libdaemon, libcurl, sqlite and openssl from
Config.in, since those are optional dependency.
- add "select" on ibrcommon, since it is a mandatory dependency.
- remove bogus includes of package/ibrcommon/Config.in and
package/ibrdtn/Config.in, those are directly from
package/Config.in.
- fix Config.in comment dependency and indentation.
- remove INSTALL_STAGING = YES, since ibrdtnd does not install a
library.
- remove libdaemon, libcurl, sqlite and openssl as mandatory
dependencies, and handle them as optional dependencies.
- add ibrcommon in the dependencies (even if ibrdtn already depends
on it)
- remove custom INSTALL_STAGING_OPTS and INSTALL_TARGET_OPTS, they
are not needed, since the Makefiles are properly generated by
automake.
- explicitly disable features for which Buildroot doesn't have the
necessary dependencies (dtndht, wifip2p, vmime)
- add hash file.]
Signed-off-by: Tom Sparks <tom_a_sparks@yahoo.com.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add missing include in package/Config.in to make the package
appear in menuconfig.
- Fix the comment dependencies: the comment should be shown either
if C++ is not available *or* if threads are not supported.
- Add a hash file.
- Add missing dependency on host-pkgconf, since pkg-config is used
to detect the availability of ibrcommon.
- Remove the custom INSTALL_STAGING_OPTS and INSTALL_TARGET_OPTS:
they are not needed since automake is used.
- Make --with-compression conditional on whether zlib is available.
- Add optional dependency on libglib2.
- Add missing final newlines in .mk and Config.in files.]
Signed-off-by: Tom Sparks <tom_a_sparks@yahoo.com.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add package in package/Config.in, to make it visible in menuconfig
- make the openssl, libnl and libxml2 dependencies optional, since
they are definitely not mandatory
- add README to the license files, since it contains useful
licensing related information.
- remove custom INSTALL_STAGING_OPTS and INSTALL_TARGET_OPTS since
the package uses automake.
- add missing final newline in Config.in and .mk file.]
Signed-off-by: Tom Sparks <tom_a_sparks@yahoo.com.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- make the license info more specific: it's BSD-2c, not just BSD.
- use a single conditional block to test the architecture, instead
of multiple separate conditions.
- add missing arm/armeb handling in the architecture condition.
- make the host-nasm dependency only used on x86/x86-64, since it's
not used for other architectures
- group the ARCH= and ENABLE64BIT= make variable definitions in a
LIBOPENH264_MAKE_OPTS variable, and use them at install time (in
addition to build time) to avoid build issues.
- wrap too long lines in the .mk file.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- replace patches from Bernd by patches that are Git formatted and
have a chance of being upstream.
- remove the no longer necessary post configure hook to build
generate_cookbook for the host
- pass --disable-unittests to disable unit tests.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
http-parser provides a simple C API to parse HTTP responses and
requests.
This packaging uses the official Joyent repository.
[Thomas:
- since we're always building the shared library, depend on
!BR2_STATIC_LIBS in Config.in. We could build only the static
library, but then we would have to do all the lib installation
manually.
- indent using tabs in Config.in
- use 'make install' instead of handcoding the library installation.
- use $(TARGET_CONFIGURE_OPTS) instead of just CC= and LD=.
- use tabs for indentation in commands instead of spaces
- add patch to fix reinstallation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The changes brought by this commit should have been part of the
previous commit, but were not due to a mistake. This commit implements
the following changes to the scrypt package:
- move from "Libraries -> Crypto" to "System tools", since it only
installs one binary, scrypt, and no library.
- bump from 1.1.6 to 1.2.0
- add comment in the .hash file explaining where the hash is coming
from.
- add missing dependency on OpenSSL
- use BSD-2c as the license code, instead of BSD2
- use 'main.c' as the license file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- move from "Libraries -> Crypto" to "System tools", since it only
installs one binary, scrypt, and no library.
- bump from 1.1.6 to 1.2.0
- add comment in the .hash file explaining where the hash is coming
from.
- add missing dependency on OpenSSL
- use BSD-2c as the license code, instead of BSD2
- use 'main.c' as the license file.]
Signed-off-by: Parnell Springmeyer <parnell@digitalmentat.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- change the inclusion location in package/Config.in to be with the
other linux-pam plugins.
- fix indentation of the Config.in file.
- fix build of the package when a toolchain without SSP support is
used.
- fix installation location of the PAM module: it was installed in
/usr/lib/security, while all other PAM modules are in
/lib/security.
- adjust the ordering of the variables in the .mk file to be a bit
more logical.
- remove passing of $(TARGET_CONFIGURE_OPTS) in <pkg>_CONF_ENV as it
is not needed: it is already done by the autotools-package
infrastructure.]
Signed-off-by: Giovanni Zantedeschi <giovanni.zantedeschi@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- make libpam-radius-auth depend on linux-pam (since it's a
linux-pam plugin, it needs some header files from linux-pam) by
adding a "if BR2_PACKAGE_LINUX_PAM...endif" block in
package/Config.in. This way, we will be grouping all the Linux PAM
plugins together.
- Fix the indententation in the Config.in file.
- Use a better Config.in help text, copy/pasted from the website.
- Use a tarball instead of github. This allows to remove
AUTORECONF=YES.
- Add linux-pam as a dependency.
- Use $(TARGET_CONFIGURE_OPTS) instead of passing just CC/LD, but
pass it in the environment rather than as options so that the
CFLAGS/LDFLAGS added by the package Makefile are still taken into
account.
- Use mkdir -p + cp -dpfr instead of $(INSTALL) -D since we are
copying multiple files.
- Add a hash file.]
Signed-off-by: Giovanni Zantedeschi <giovanni.zantedeschi@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will give us a shorter URL, that we can more easily refer to in the
documetation itself, in help texts, on IRC...
[Peter: Use buildroot.org everywhere]
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As libgudev recently was split from the main systemd/udev source, this
library is now required to build certain packages.
This library is only relevant to systemd, as the code it contains is
still contained in eudev.
[Thomas:
- don't show the dependency comment when systemd is not available,
since libgudev is anyway useless when you're not using systemd.
- fix the license, it's LGPLv2.1+ and not GPLv2+
- remove useless empty lines in the .mk file.]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As Jonathan noticed in [1], users' applications may depend on opencv-2.4
APIs removed in opencv-3.0.
So, re-introduce opencv package as it was right before the bump to
opencv-3.0 (i.e.: commit bf00b5a9ea).
We do not support both OpenCV-2.4 and OpenCV-3 at the same time, so make
OpenCV-3 depend on !OpenCV-2.4.
[1] http://lists.busybox.net/pipermail/buildroot/2015-August/135270.html
Cc: Jonathan Ben Avraham <yba@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr:
- remove legacy symbols, now
- make opencv3 depends on !opencv, not the other way around
- slitghly reword the commit log (opencv/opencv3 dependency)
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
