Currently, enabling more than one filesystem image will make
'show-targets' list a few host packages more than once.
This is because all filesystem images add the same set of
host-packages to their dependencies, which are then added as-is
to the package list.
Thus, host-fakeroot, host-makedevs and, if needed, host-mkpasswd will
appear as many times as there are filesystem images enabled.
Fix that by sorting the package list, thus eliminating duplicates from
that list. Also sort the rootfs list for good measure. Sort the two
separately, so that rootfses are last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we do nothing about packages that touch the same file: given
a specific configuration, the result is reproducible (even though it
might not be what the user expected) because the build order is
guaranteed.
However, when we later introduce top-level parallel build, we will no
longer be able to guarantee a build order, by the mere way of it being
parallel. Reconciliating all those modified files will be impossible to
do automatically. The only way will be to refuse such situations.
As a preliminary step, introduce a helper script that detects files that
are being moified by two or more packages, and reports them and the
impacted packages, at the end of the build.
The list being reported at the end of the build will make it prominently
visible in autobuilder results, so we can assess the problem, if any.
Later on, calling that helper script can be done right after the package
installation step, to bail out early.
Thanks Arnout for the pythonist way to write default dictionaries! ;-)
Note: doing it in python rather than a shell script is impressively
faster: where the shell script takes ~1.2s on a minimalist build, the
python script only takes ~0.015s, that is about 80 times faster.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: rename script without .py extension.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'include' directive in GNU make supports wildcards, but their
expansion has no defined sort order (GLOB_NOSORT is passed to glob()).
Usually this doesn't matter. However, there is at least one case where
it does make a difference: toolchain/*/*.mk includes both the
definitions of the external toolchain packages and
pkg-toolchain-external.mk, but pkg-toolchain-external.mk must be
included first.
For predictability, use ordered 'include $(sort $(wildcard ...))'
instead of unordered direct 'include */*.mk' everywhere.
Fixes [1] reported by Petr Vorel:
make: *** No rule to make target 'toolchain-external-custom', needed by '.../build/toolchain-external/.stamp_configured'. Stop.
[1] http://lists.busybox.net/pipermail/buildroot/2017-November/206969.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: also sort the one remaining include, of the external docs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).
However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/
Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.
Abide by the rule, and only set it if not already set.
This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It is used by Kconfig's merge_config.sh.
No alldefpackageconfig is added, since it's rather pointless: it would
only enable busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules for the *config targets are all very similar, so factor them
together using $@.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some macros, soon some variables, currently defined in the skeleton are
going to be used by other packages.
Some of those variables will be used as Makefile conditions (e.g. in
ifeq() conditions), so they *must* be defined before being used.
Since the skeleton package, starting with an 's', is included quite
late, those variables would not be available to most packages.
Offload the existing macros into the new system/system.mk file, that is
included early, before any package is. Rename the macros to appropriate
names.
Future commits will add new macros and variables in that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a separate make target to build a relocatable SDK. We first
sanitize the RPATH in host tree. Next we also sanitize the
staging tree. Therefore "sdk" must depend on world.
Sanitizing staging is not really needed, in the sense that any rpath
in there is simply not going to be used. We want to sanitize staging
for the following reasons:
- To avoid leaking references to the original output directory. This
way, we can validate that the SDK is relocatable by running a simple
"grep -r ${BASE_DIR} ${HOST_DIR}". Obviously RPATH sanitization is
not sufficient (e.g. also the references to source files have to be
stripped), but it's a step in the right direction. This reason is
obviously only relevant for the SDK.
- To make sure that when an executable is copied to target that it
actually executes correctly. Since within Buildroot we never copy
stuff from staging to target, this is clearly only relevant for
the SDK.
Finally we install the script "relocate-sdk.sh" into the top directory
of the SDK (HOST_DIR) and the SDK location path is stored in the file
"HOST_DIR/share/buildroot/sdk-location"-
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We sanitize the RPATH of ELF files in the target tree to deal
with stupid packages that don't correctly use --prefix/DESTDIR
and that end up putting the full absolute build-time directory
in the RPATH.
We do it before copying the overlay and calling the post-build
script. The user is completely responsible for what happens
in the last two steps, and it should never be touched by us.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up to now we created the $(HOST_DIR)/usr compatibility symlink as part
of the creation of $(HOST_DIR) itself. However, when the user specifies
a custom BR2_HOST_DIR, it is possible that the directory already exists
so this rule will never trigger.
Therefore, add an explicit rule for creating $(HOST_DIR)/usr and add
this rule to the dependencies of the dirs target. HOST_DIR itself goes
back to the standard rule for directories. The order-only dependency of
STAGING_DIR isn't needed any more either: HOST_DIR is implicitly
created if needed by mkdir -p, and we don't need to trigger the
HOST_DIR rule any more if the directory already exists.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This silences the annoying warning that there is no hash file for our
own COPYING file.
Also change the message so that it is more obvious what we're doing.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/usr is a symlink to $(HOST_DIR), it makes no sense to
still have it in BR_PATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into $(HOST_DIR)/usr/lib without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/lib to ../lib.
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we also have to update the
check-host-rpath script to accept both $(HOST_DIR)/usr/lib and
$(HOST_DIR)/lib, because depending on how the package derives the
path, it may be different.
Since there are some dependency chains that involve $(STAGING_DIR),
$(STAGING_DIR) may in fact be created before $(HOST_DIR). Since
$(STAGING_DIR) is a subdirectory of $(HOST_DIR), it is possible that the
newly added rule for $(HOST_DIR) never triggers. To make sure that the
rule does trigger, add an order-only dependency from $(STAGING_DIR) to
$(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into
$(HOST_DIR)/usr/$(GNU_TARGET_NAME) (i.e., binutils and gcc) without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/$(GNU_TARGET_NAME) to
../$(GNU_TARGET_NAME).
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
Effectively, the usr/ part is removed from $(STAGING_SUBDIR) (and
therefore from $(STAGING_DIR)), so update the definition of that
variable right away.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will be useful when checking the hashes of the license files.
[Peter: use '.' as buildroot directory so /buildroot.hash isn't checked]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to error out instead of running menuconfig when no .config
is available broke an existing use case:
make O=output-foo; cd output-foo; br-init-conf (or similar to get a sensible .config); make
As there is no wrapper makefile in output-foo.
Fix it by ensuring the wrapper gets created if needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit improves our .gitlab-ci.yml logic to execute our runtime
tests located in support/testing/. To do so, this commit:
- Adds more Debian packages to be installed, namely the nose2 and
pexpect packages needed by the runtime testing infrastructure, as
well as the necessary Qemu emulators
- The description of how to run the runtime tests. Each test is
executed as a separate Gitlab CI job, so that the status of each
test is easily visible in the Gitlab CI web interface.
- The Makefile is improved to auto-generate .gitlab-ci.yml from
.gitlab-ci.yml.in, like we're doing for defconfigs. Since the
dependencies of .gitlab-ci.yml are no longer correct, we abandon
them and instead make it a PHONY target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: simplify .gitlab-ci.in a little, removing redundant stuff;
make .gitlab-ci.yml a PHONY target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since forever, we run 'menuconfig' automatically on an unconfigured
tree. However, this does not help users that much:
- If they read the documentation, they should already know to run
make menuconfig first.
- If they haven't read the documentation, dropping them in menuconfig
isn't very helpful.
- It's a likely that the user didn't intend to be in an unconfigured
tree (e.g. wrong O= specified), so starting menuconfig (and polluting
this wrong O= directory) is not very helpful.
- It's possible that the user really doesn't want menuconfig, but
instead needs xconfig, or some defconfig, or ...
So, instead of trying to guess what the user needs, print an error and
let the user decide what to do next.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Alessandro Power on StackOverflow [1], the behaviour
of "make toolchain" in an unconfigured tree is misleading.
When .config doesn't exist, we don't read in the package .mk files, so
"make <package>" doesn't work:
$ make busybox
make: *** No rule to make target 'busybox'. Stop.
However, for "linux" and "toolchain", the corresponding file (or
actually directory) already exists. So instead, we get:
$ make linux
make: Nothing to be done for 'linux'.
This is confusing, because it looks as if the build succeeded.
The obvious solution is to make linux and toolchain PHONY targets when
.config doesn't exist. However, that actually does the reverse, because
then a rule _does_ exist for them and since they don't have
dependencies, make will consider them to be ready.
Therefore, we also have to provide an explicit rule for them, and
explicitly error out. Thise behaviour is still different from other
packages, but at least it is much less confusing.
[1] https://stackoverflow.com/questions/44521150
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.
To avoid this, make sure there is a shell command by adding :.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:
- it is more difficult to see if a target is missing from PHONY;
- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
but some of these targets are also defined when there is no .config;
in that case, these targets are not declared as PHONY.
Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.
The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This simplifies the variable a little
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain is a package, so it is already defined as .PHONY in the
inner-generic-package macro.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When debugging hidden dependencies, the build order is very important.
Most notably, it is interesting to identify potential culprits.
Add a new top-level rule, show-biuld-order, that dumps all the packages
in the order they would get built.
Note that there are a few differences with show-targets:
- more packages are reported, becasue show-targets does not report
host packages that have no prompt;
- the output is line-based, because we're using $(info $(1)); getting
a single output line like show-targets would require we use an
actual command, like printf '%s ' $(1); but that takes a lot of
time, while $(info $(1)) is almost instantaneous (the time to parse
the Makefiles);
- rootfs targets are not reported.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the output of printvars copntains the name of the variable,
its expanded value and its un-expanded value.
However, most of the time, we need the actual, expanded value, so it can
be re-used from a (non-Buildroot) infrastructure script, like a
post-build script, or a build-farm driver (e.g. a Jenkins job...)
Add two options that a user may set to change the output of printvars:
- QUOTED_VARS, if set, will quote the value
- RAW_VARS, if set, will print the unexpanded value
The new output by default only prints the expanded value now.
So that it can be used as such:
$ make -s printvars VARS=BUSYBOX_VERSION
BUSYBOX_VERSION=1.26.2
$ make -s printvars VARS=BUSYBOX_RDEPENDENCIES QUOTED_VARS=YES
BUSYBOX_RDEPENDENCIES='ncurses util-linux'
$ make -s printvars VARS=BUSYBOX_FINAL_PATCH_DEPENDENCIES RAW_VARS=YES
BUSYBOX_FINAL_PATCH_DEPENDENCIES=$(sort $(BUSYBOX_PATCH_DEPENDENCIES))
And it is even possible to directly evaluate it in a shell script:
eval $(make -s printvars VARS=BUSYBOX_VERSION QUOTED_VARS=YES)
Backward compatibility of the output is not maintained. It is believed
that scripts that depended on the previous output were very fragile to
begin with, because they had to filter the non-formatted output
(splitting on spaces or braces was not really possible, because values
could contain either).
Document printvars and its options in the manual; list it in the output
of 'make help'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow architectures to define variables and helper macros.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildroot repository is now mirrored on
https://gitlab.com/buildroot.org/buildroot so we can use Gitlab-CI to
test Buildroot. Gitlab-CI is controlled by a .gitlab-ci.yml file
that exists in the repository.
For now, the only test is building all defconfigs (inspired on
https://travis-ci.org/buildroot/buildroot-defconfig-testing/). Since
all the defconfigs have to be specified in the .gitlab-ci.yml file,
we generate the file based on .gitlab-ci.yml.in. The generated
.gitlab-ci.yml file has to be committed into the repository, though,
otherwise Gitlab-CI doesn't see it. So there is also a test to verify
that .gitlab-ci.yml is up-to-date.
Building all the defconfigs takes a long time. Gitlab-CI will do that
every time it pulls from git.buildroot.org, which is once per hour.
That is way too often. Therefore, the defconfigs are not built on pull,
but only on explicit trigger through the API or when a tag is added.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- fix typo not -> no
- add LC_ALL=C when calling 'ls -1' to get a predictable order of the
defconfigs
- regenerate .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit teaches the generic package handling code how to extract .tar.lz
archives. When lzip is not installed on the host, host-lzip gets built
automatically.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When GCC_COLORS is set, ccache passes '-fdiagnostics-color' to GCC but
this flag requires GCC v4.9 or later. Older versions complain about the
unrecognized command line option.
Using GCC_COLORS in the context of Buildroot is seldom useful, so we
just unexport GCC_COLORS altogether.
Reported-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable fakedate for whole build process.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit f71a621d91, we are using the
SED variable in the main Makefile. However, this variable is only
defined in package/Makefile.in, which gets included only when a
configuration is defined.
This means that, if you do:
$ make menuconfig savedefconfig
without a configuration defined, it fails with:
/bin/bash: /BR2_DEFCONFIG=/d: No such file or directory
Makefile:898: recipe for target 'savedefconfig' failed
make[1]: *** [savedefconfig] Error 127
This issue affects users of the "buildroot-submodule" project, which
does menuconfig+savedefconfig automatically. They worked around this
issue in commit
d12676b608,
but really "make menuconfig savedefconfig" should work out of the box.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 173135df5b ("core: re-enter make if
$(CURDIR) or $(O) are not canonical paths") introduced the CANONICAL_O
variable, defined as:
CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
This duplicates the definition of BASE_DIR, by different means:
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
So one of these shell calls is redundant. CANONICAL_O is defined first,
so this commit replaces the BASE_DIR derivation with $(CANONICAL_O).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The distclean target no longer removes the "output" directory for
in-tree builds, because $(O) is no longer just "output" in that
case. Change the test to be against "$(CURDIR)/output", to match
the O setting, and a similar test elsewhere in the same Makefile.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make may throw an error (but ignored) trace when cleaning up the
rootfs.
The target-finalize rule intends to remove the folder
`$(TARGET_DIR)/usr/share' but this directory may still contain items
(such as the `udhcpc' helper script) and causes the rmdir to fail.
The stderr output is redirected to /dev/null but it returns and error
which is escaped by the leading `-'; but make reports an ignored-error.
See the log below:
$ make
(...)
rm -rf (...)/target/usr/share/gtk-doc
rmdir (...)/target/usr/share
rmdir: failed to remove '(...)/target/usr/share': Directory not empty
make[1]: [Makefile:650: target-finalize] Error 1 (ignored)
find /(...)/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 (...)/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
This patch apply the same rule at the instruction immediately after:
* redirecting stderr to /dev/null (already done) and
* executing true if the `rmdir' instruction fails.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a space before and after the equal sign when defining the TZ, LANG
and LC_ALL variables, as suggested by the Buildroot coding style.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default invocation to gzip include timestamp in output file. This feature is
incompatible with BR2_REPRODUCIBLE. It is possible to disable it with '-n'.
The environment variable GZIP can hold a set of default options for gzip. So
instead to find all gzip invocation in build process, we just export 'GZIP=-n'.
Notice bzip2, lzma and xz are not impacted by this problem. On the other hand, lzop
does include timestamp and does not provide any way to disable it.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When reproducibility is requested, generate a global SOURCE_DATE_EPOCH
environment variable which contains either the date of Buildroot last
commit if running from a git repository, or the latest release date.
This means that all packages embedding build dates will appear to
have the same build date, so in case of new commit or release, all
packages will appear to have been changed, even though some of them
may not have changed in fact.
The meaning of SOURCE_DATE_EPOCH is specified by the following
specification:
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently some buildroot targets fails (list-defconfigs,
graph-build, etc), if there is an issue with configuration.
For example, enabling uboot package without providing custom
version name results in failing of various targets.
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: as suggested by Arnout, added printvars and savedefconfig to
nobuild_targets.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If 'lib' is a symlink (as is the case when BR2_ROOTFS_MERGED_USR=y),
'find lib' does not return the correct result. So, until now,
libpthread*.so* and ld-*.so* were not stripped when 'lib' was a symlink.
We fix this by using 'find lib/' instead of 'find lib'. For consistency
reason, we also do the same change for the 'find' that removes .a and
.la files.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: slightly improved the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't use the default implicit rules that are added by make, so
they just slow down the Makefile processing. The default implicit
rules can be removed by defining an empty .SUFFIXES: target.
This speeds up the start of the build on my machine from 5.6s to
4.9s.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The top-level Makefile contains an "override O := $(O)" statement that
is purportedly required to make sure the O flag doesn't leak into the
environment of sub-makes. However, since commit 173135d, there is
already an "override O := ..." a few lines down. Therefore, the first
override is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We reset MAKEOVERRIDES to avoid passing down variables that are
overridden on the command line to the package build systems. Indeed,
the variables overridden on the command line will be Buildroot
variables and not relevant to the package build system. In particular
the O option is used by some packages and the value passed in on the
command line is plain wrong for the individual package.
However, in commit 916e614b, MAKEOVERRIDES was moved earlier and it
was reset _before_ re-entering make in the cases when something has
to be fixed up (incorrect umask, non-absolute paths in O or CURDIR).
Therefore, if make is re-entered, any command line overrides are lost.
This particularly bites the autobuilders, because they use
O=<relative path> to specify the output directory, and they add
BR2_JLEVEL=... to avoid starting too many jobs in parallel. The
BR2_JLEVEL override is lost.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can dump the reverse dependencies of a package, add the
ability to graph those.
It does not make sense to do a full reverse graph, as it would be
semantically equivalent to the direct graph. So we only provide a
per-package reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finding the packages that select another one in a specific configuration
is not very trivial:
- when optional, the dependency is not expressed in Kconfig
- looking at the .mk files is not very nice.
Introduce a way to dump reverse dependencies of packages, i.e. the list
of packages that directly depend on that package. Like for direct
dependencies, we limit the list to the first-order reverse dependencies.
Document it in the main help; use the opportunity to also document
foo-show-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When $(CURDIR) and/or $(O) contain symlinks in their paths, they can be
resolved differently, depending on each package build-system (whether it
uses the given paths or get the absolute canonical ones).
Using absolute canonical paths will help achieving reproducible builds and
will make easier tracking down host machine paths leaking into the host,
target or staging trees.
So, this change ensures the build takes place with the CURDIR and O
variables are set to their absolute canonical paths.
In order to recall the toplevel makefile with absolute canonical paths
for $(CURDIR) and $(O), we need to:
1- Compute the absolute canonical paths for $(CURDIR) and $(O) that will
be passed to the sub-make. This is achieved using the 'realpath' make
primitive. However, some care must be taken when manipulating O:
- the out-of-tree makefile wrapper happens a trailing "/.", we need
to strip this part away to not break the comparison driving the
sub-make call;
- the user can leave a trailing '/' to $(O);
- according to [1,2], realpath returns an empty string in case of
non-existing entry. So, to avoid passing an empty O= variable to
sub-make, it is necessary to define the output directory and create
it prior to call realpath on it (because on the first invocation,
$(O) usually does not yet exists), hence the trick doing the mkdir
right before calling realpath.
2- Update EXTRAMAKEARGS with the absolute canonical $(O) and use it
when call recalling the top-level makefile with umask and paths
correctly set.
3- Lastly, update the condition for setting the CONFIG_DIR and
NEED_WRAPPER variables.
Note:
* This change takes care of the makefile wrapper installed in $(O) to
avoid unneeded make recursion.
[1] https://www.gnu.org/software/make/manual/html_node/File-Name-Functions.html
[2] http://man7.org/linux/man-pages/man3/realpath.3.html
Reported-by: Matthew Weber <matt@thewebers.ws>
Cc: Matthew Weber <matt@thewebers.ws>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change only moves things around and comments what is done in the
top-level Makefile file, in order to prepare the next changes.
Note that moving the definition of $(O) before or after re-entering make
does not change anything on the buildroot behavior.
This change also renames the variable UMASK to REQ_UMASK.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change uncorrolates the CONFIG_DIR and NEED_WRAPPER definition from
the presence of the O variable in the command line.
Now, the condition used to set these variables is the value of O itself.
This change is a preparatory work since the O definition will need to
be moved around when we will make Buildroot run with absolute canonical
paths for both its root directory and the output location.
This will be addressed in a follow-up patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, it is not possible for a br2-external tree to override a
defconfig bundled in Buildroot, nor is it possible to override one from
a previous br2-external tree in the stack.
However, it is interesting that a latter br2-external tree be able to
override a defconfig:
- the ones bundled in Buildroot are minimalist, and almost always
build a toolchain, so a br2-external tree may want to provide a
"better" defconfig (better, in the sense "suited for the project");
- similarly for a defconfig from a previous br2-external tree.
But we can't do that, as the rules for the defconfigs are generated in
the order the br2-external trees are specified, all after the bundled
defconfigs. Those rule are patten-matching rules, which means that the
first one to match is used, and the following ones are ignored.
Add a new utility macro, 'reverse', inspired from GMSL, that does what
it says: reverse a list of words.
Use that macro to reverse the list of br2-external trees, so that the
latters win over the formers, and even over bundled ones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we only support at most one br2-external tree. Being able
to use more than one br2-external tree can be very useful.
A use-case would be for having a br2-external to contain the basic
packages, basic board defconfigs and board files, provided by one team
responsible for the "board-bringup", while other teams consume that
br2-external as a base, and complements it each with their own set of
packages, defconfigs and extra board files.
Another use-case would be for third-parties to provide their own
Buildroot packaging in a br2-external tree, along-side the archives for
their stuff.
Finally, another use-case is to be able to add FLOSS packages in a
br2-external tree, and proprietary packages in another. This allows
to not touch the Buildroot tree at all, and still be able to get in
compliance by providing only that br2-external tree(s) that contains
FLOSS packages, leaving aside the br2-external tree(s) with the
proprietary bits.
What we do is to treat BR2_EXTERNAL as a colon-separated (space-
separated also work, and we use that internally) list of paths, on which
we iterate to construct:
- the list of all br2-external names, BR2_EXTERNAL_NAMES,
- the per-br2-external tree BR2_EXTERNAL_$(NAME) variables, which
point each to the actual location of the corresponding tree,
- the list of paths to all the external.mk files, BR2_EXTERNAL_MKS,
- the space-separated list of absolute paths to the external trees,
BR2_EXTERNAL_DIRS.
Once we have all those variables, we replace references to BR2_EXTERNAL
with either one of those.
This cascades into how we display the list of defconfigs, so that it is
easy to see what br2-external tree provides what defconfigs. As
suggested by Arnout, tweak the comment from "User-provided configs" to
"External configs", on the assumption that some br2-external trees could
be provided by vendors, so not necessarily user-provided. Ditto the menu
in Kconfig, changed from "User-provided options" to "External options".
Now, when more than one br2-external tree is used, each gets its own
sub-menu in the "User-provided options" menu. The sub-menu is labelled
with that br2-external tree's name and the sub-menu's first item is a
comment with the path to that br2-external tree.
If there's only one br2-external tree, then there is no sub-menu; there
is a single comment that contains the name and path to the br2-external
tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This unique NAME is used to construct a per br2-external tree variable,
BR2_EXTERNAL_$(NAME)_PATH, which contains the path to the br2-external
tree.
This variable is available both from Kconfig (set in the Kconfig
snippet) and from the .mk files.
Also, display the NAME and its path as a comment in the menuconfig.
This will ultimately allow us to support multiple br2-external trees at
once, with that NAME (and thus BR2_EXTERNAL_$(NAME)) uniquely defining
which br2-external tree is being used.
The obvious outcome is that BR2_EXTERNAL should now no longer be used to
refer to the files in the br2-external tree; that location is now known
from the BR2_EXTERNAL_$(NAME)_PATH variable instead. This means we no
longer need to expose, and must stop from from exposing BR2_EXTERNAL as
a Kconfig variable.
Finally, this also fixes a latent bug in the pkg-generic infra, where we
would so far always refer to BR2_EXTERNAL (even if not set) to filter
the names of packages (to decide whether they are a bootloader, a
toolchain or a simple package).
Note: since the variables in the Makefile and in Kconfig are named the
same, the one we computed early on in the Makefile will be overridden by
the one in .config when we have it. Thus, even though they are set to
the same raw value, the one from .config is quoted and, being included
later in the Makefile, will take precedence, so we just re-include the
generated Makefile fragment a third time before includeing the
br2-external's Makefiles. That's unfortunate, but there is no easy way
around that as we do want the two variables to be named the same in
Makefile and Kconfig (and we can't ask the user to un-quote that variable
himself either), hence this little dirty triple-inclusion trick.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we treat the case where we have no br2-external tree
(BR2_EXTERNAL is empty) differently from the case where we do have one
(BR2_EXTERNAL is not empty).
There is now no reason to treat those two cases differently:
- the kconfig snippet is always generated appropriately (i.e. it would
include the br2-external tree if set, or include nothing otherwise);
- we no longer have a dummy br-external tree either.
Also, the Makefile code to handle BR2_EXTERNAL is currently quite
readable if at least a little bit tricky.
However, when we're going to add support for using multiple br2-external
trees simultaneously, this code would need to get much, much more complex.
To keep the Makefile (rather) simple, offload all of the handling of
BR2_EXTERNAL to the recently added br2-external helper script.
However, because of Makefiles idiosyncracies, we can't use a rule to
generate that Makefile fragment.
Instead, we use $(shell ...) to call the helper script, and include the
fragment twice: once before the $(shell ...) so we can grab a previously
defined BR2_EXTERNAL value, a second time to use the one passed on the
command line, if any.
Furthermore, we can't error out (e.g. on non-existent br2-external tree)
directly from the fragment or we'd get that error on subsequent calls,
with no chance to override it even from command line.
Instead, we use a variable in which we store the error, set it to empty
before the second inclusion, so that only the one newly generated, if
any, is taken into account.
Since we know the script will always be called from Makefile context
first, we know validation will occur in Makefile context first. So we
can assume that, if there is an error, it will be detected in Makefile
context. Consequently, if the script is called to generate the kconfig
fragment, validation has already occured, and there should be no error.
So we change the error function to generate Makefile code, so that
errors are caught as explained above.
Lastly, when the value of BR2_EXTERNAL changes, we want to 'forget'
about the previous value of the BR2_EXTERNAL_MK variable, especially in
the case where BR2_EXTERNAL is now set to empty, so that we do not try
to include it later. That's why we first generate empty version of
BR2_EXTERNAL_MK, and then assign it the new value, if any.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we generate a kconfig snippet, we can conditionally include the
BR2_EXTERNAL's Config.in only when BR2_EXTERNAL is supplied by the user,
which means our empty/dummy Config.in is no needed.
As for external.mk, we can also include it only when BR2_EXTERNAL is
supplied by the user, which means our empty/dummy external.mk is no
longer needed.
Ditch both of those files, and:
- only generate actual content in the Kconfig snippet when we actually
do have a BR2_EXTERNAL provided by the user (i.e. BR2_EXTERNAL is not
empty);
- add a variable that contains the path to the external.mk provided by
the user, or empty if none, and include the path set in that variable
(make can 'include' nothing without any problem! ;-) )
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the inclusion of br2-external's Config.in to the generated kconfig
snippet.
This will ultimately allow us to use more than one br2-external tree.
Offload the "User-provided options" menu to the generated Kconfig
snippet. We can also move the definition of the Kconfig-version of
BR2_EXTERNAL into this snippet.
We introduce an extra check that was not present in the previous code,
to check that we do have permission on that directory. Prevciously, it
was handled as a side effect of not being able to cd into there, but it
is cleaner to check it expressly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_DEPRECATED logic is a lot less useful than the legacy handling,
because the symbols just disappears without warning to the user. For
example, we had a few defconfigs that were using deprecated symbols
(which were not actually used because BR2_DEPRECATED wasn't set) so
these didn't build the expected code anymore.
Also, the idea behind BR2_DEPRECATED is that you can easily revive it
again if there is interest. However, it is relatively easy to revert
the removal of a package as well.
The deprecation is also more effort because it has to be removed twice:
once when deprecating, and once when really removing.
It doesn't make sense to add a legacy entry for BR2_DEPRECATED. Users
who actually used it will get legacy warnings instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By aggregating all the license files into a single big text-only file
means we have no way to use license files that are binary blobs (e.g.
pdf, rtf...).
Just do not generate that big file; if the user still wants it, it is
very easy to create it afterwards.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We used to do a special handling of Linux kernel modules when stripping
target binaries because there's some special precious data in modules
that we must keep for them to properly operate. This is for example true
for stack unwinding data etc.
It turned out there're cases when our existing "strip --strip-unneeded"
doesn't work well. For example this removes .debug_frame section used by
Linux on ARC for stack unwinding, refer to [1] and [2] for more details.
Now Linux kernel may strip modules as a part of "modules_install" target
if INSTALL_MOD_STRIP=1 is passed in command line. And so we'll do
allowing kernel decide how to strip modules in the best way.
Still note as of today Linux kernel strips modules uniformly for all
arches with "strip" command, so this commit alone doesn't solve
mentioned problem but it opens a possibility to add later a patch to the
kernel which will strip modules for ARC differently - and that's our
plan for mainline kernel.
[1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/86
[2] http://lists.busybox.net/pipermail/buildroot/2016-September/172161.html
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the .config contains invalid configuration *(e.g. two providers for
a same virtual package), it is not possible to run "make distclean"
because the .config file is sourced and packages interpreted in this
case.
Add distclean to the noconfig list, so that we can run it in all cases.
However, this meand that DL_DIR is no longer set, and thus the default
download location never removed. We fix that by always removing the
download location, so that if it is the one configured we still remove
it (no change) and if it is not the one configured, we remove an
non-existing location and leave the user's location intact (no change
either).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the infrastructure for adding generated kconfig snippet in the
menuconfig.
For now, the kconfig snippet is generated empty, the recipe for filling
it in will be introduced in sub-sequent patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some of those directories will be needed even during configuration, like
BUILD_DIR, where we'll store the generated kconfig snippet.
So, move the rule to create them outside the BR2_HAVE_DOT_CONFIG block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fixup commit log, as noticed by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all configurators depend on generating the out-of-tree
Makefile wrapper.
In an upcoming patch, we'll need to also generate a kconfig fragment,
so it will have to kick in before we run the configurators.
Introduce a new intermediate "prepare-kconfig" rule, so we can
commonalise the dependencies of the configurators. Move the dependency
on the Makefile wrapper to that new intermediate rule.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mark prepare-kconfig as a phony target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The code for both cases is exactly the same, and only differs in the
location where defconfig files are looked for.
We use an intermediate macro to generate the corresponding rules,
because directly generating the rules is ugly and needs lots of escaping
and double-dollar-ing for the $(eval ...) and $(foreach ...) calls to
play nicely together.
Furthermore, that will be tremendously useful when we support multiple
br2-external trees.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: move comment outside of the make target, so that it isn't
displayed on stdout when loading a defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-utils.mk contains various definitions that are used in the package
infrastructures and packages themselves.
However, those definitions can be useful in other parts of Buildroot,
and are already used in a few places that are not related to the package
infrastructure. Also, $(sep) will be needed early in the Makefile when
we eventually support multiple br2-external trees.
Since this file only contains definitions, we can include it anytime.
So, consider that file to no longer be specific to the package infras:
- move it to support and rename it,
- move a few similar definitions from the main Makefile to that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And export BR2_REPRODUCIBLE for post-build / post-image scripts.
[Peter: Extend commit message,
move export together with our other exports,
add comment explaining why we override local/timezone]
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Having a hash of the saved files can be interesting for the recipient to
verify the integrity of the files.
We remove the warning file earlier, to exclude it from the hash
list.
We generate the hash list in a temporary file that will not be matched
by the "find" expression, and once the file is generated, we remain it
to its final name.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust indentation, improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some shells' builtin umask does not print 2 leading 0's for the umask.
Switching to bash is done anyway.
This patch switches to bash before the umask test.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use the helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that the uclibc-menuconfig rule was guarded behind
BR2_TOOLCHAIN_BUILDROOT, which is wrong since we can build
glibc or musl toolchains too...
This is de facto fixed by moving the help text to the uClibc package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use the helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use the helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use a helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all our internal packages provide actions that are prefixed
with their own names. This makes it obvious what package the action
refer to.
However, the help commands are really free-form. This means that
packages (and especially packages from a br2-external tree) may provide
completely arbitrary help text.
As such, all that text can get pretty easily mixed up, and it will be
very difficult to read.
Prefix each package-specific help text with the name of the package it
refers to. This generate a "make help" that looks like:
[...]
Package-specific:
<pkg> - Build and install <pkg> and all its dependencies
<pkg>-source - Only download the source files for <pkg>
<pkg>-extract - Extract <pkg> sources
<pkg>-patch - Apply patches to <pkg>
<pkg>-depends - Build <pkg>'s dependencies
<pkg>-configure - Build <pkg> up to the configure step
<pkg>-build - Build <pkg> up to the build step
<pkg>-graph-depends - Generate a graph of <pkg>'s dependencies
<pkg>-dirclean - Remove <pkg> build directory
<pkg>-reconfigure - Restart the build from the configure step
<pkg>-rebuild - Restart the build from the build step
busybox:
busybox-menuconfig - Run BusyBox menuconfig
busybox-nconfig - Run BusyBox nconfig
barebox:
barebox-menuconfig - Run barebox menuconfig
barebox-savedefconfig - Run barebox savedefconfig
linux:
linux-menuconfig - Run Linux kernel menuconfig
linux-savedefconfig - Run Linux kernel savedefconfig
linux-update-defconfig - Save the Linux configuration to the path specified
by BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
Documentation:
manual - build manual in all formats
manual-html - build manual in HTML
[...]
(Note: busybox, barebox, linux help will be converted in followup
commits, they are represented here as an example of what this patch
does look like.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a package-variable to store the package-specific make rules.
Although this variable would be seldom used, we still document it.
However, we make sure the documentation explicitly states that this
variable should not be used (if it needs to be, the submitter of a
package will be told so during reviews).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use rsync with '--keep-dirlinks' option to prevent rootfs overlay to
overwrite /usr, /bin, /sbin and /lib links in case BR2_ROOTFS_MERGED_USR
option is enabled.
Steps to reproduce failure:
- enable BR2_ROOTFS_MERGED_USR
- mkdir some_path/rootfs-overlay/lib/firmware/some_file.txt
- enable BR2_ROOTFS_OVERLAY="some_path/rootfs-overlay"
- run 'make'
- 'target/lib' contains only the files from 'some_path/rootfs-overlay/lib' instead
of the original symlink 'lib -> usr/lib'.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a locale directory is empty, shell code like "for langdir in
$$dir/*;" will loop once with langdir set to "path/to/dir/*", rather
than not looping at all, which would obviously be the desired
behavior.
Then "grep -qx $${langdir##*/}" ungoes two shell expansions (how?)
that transform the expression from "${langdir##*/}" to "*" to "list of
all files in buildroot root dir". Which is most certainly not what
this command was supposed to do.
If one of those files happens to be an 8GB flash image, grep consumes
all available memory and crashes trying to search it.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 84c825f8e8.
Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).
Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 0a767deba0.
Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).
Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The goal is to fix the compilation of perf (from linux) when LD or AR
variables are inherited from the environment.
After the linux upstream commits 5ef7bbb09f7b ("perf tools: Allow to
specify custom linker command") and 3c71ba3f80bb ("perf tools: Really allow
to specify custom CC, AR or LD") CC, AR, and LD variables are not overridden
if they are inherited.
In case of a cross compilation, it results in an inconsistent state: CC is
overridden but not LD and AR.
Linux-patch: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5ef7bbb09f7b
Linux-patch: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3c71ba3f80bb
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch merges the custom help, introduced in the previous patch, at
the end of our internal help.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using a br2-external tree, it is possible (as stated in our manual)
to implement whatever arbitrary extra make rules (such as flashing a
board, or extracting the rootfs in an NFS export...). Some of those
extra rules might be exposed to the user as new entry points that the
user can call by itself.
However, there is no way for the br2-external to advertise those new
rules in the help text.
We add the possibility to do so, by adding a new make rule, called
help-custom, advertised in our own help info.
It is up to the br2-external tree to provide whatever help text is
deemed necessary. The format of the help is completely free-form.
Note that we need to provide an empty, dummy help-custom rule, since it
is always advertised (making it .PHONY does not work). Since this rule
is empty, make gently reports that there is "Nothing to be done for
`help-local'", which is pretty well fitting when help-local was not
provided (either because there's no br2-external tree, or when the
br2-external tree does not provide it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This changes saves a shell call and uses a variable automatically set
by make [1].
[1] http://www.gnu.org/software/make/manual/make.html#Quick-Reference
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a make target that will checks the dependencies of all packages.
This will currently only detect circular dependencies, but more tests
can be added later if need be.
This can then be used in the autobuilders to automatically report
dependency issues.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we generate the dependency graph in a single command, piping
the stdout of support/scripts/.graph-depends to the stdin of dot.
Unfortunately, this means we can't catch a failure of graph-depends, as
the shell can only treturn the exit code of the last command in a pipe.
Still, we do want to keep the output of graph-depends, and we in fact do
keep it by mean of a tee.
graph-depends has just gained the ability to generate its output to a
file, so we break the pipe in two differnet commands, so we can bail out
on graph-depends errors.
Do that for the two call sites.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At least with French user's locale HOSTARCH is empty since
'Target' is not present in gcc output.
gcc -v 2>&1
Utilisation des specs internes.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/5.3.1/lto-wrapper
Cible : x86_64-redhat-linux
Override the user's local with LC_ALL=C.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 7a6b83a211 introduced the skeleton
package, which took over the lib32/lib64 -> lib symlink creation from the
main Makefile.
However, the definition of the LIB_SYMLINK variable did not move along, for
no real reason.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we set HOSTARCH to the output of `uname -m`. This gives us
the architecture as seen by the running kernel. For example, we would
end up with 'x86_64' for a 64-bit kernel running on an x86_64 processor.
We use that value to determine whether we can run some binary tools,
like our pre-configured external toolchains.
However, one may be running a userland in a different bitness than that
of the running kernel. For example, one may run in a 32-bit chroot, even
though the kernel is running in 64-bit.
Up until recently, this was not an issue because the pre-configured
external toolchains were all requiring an i386 (x86 in Buildroot
parlance).
But since we introduced the latest Linaro toolchains, we now have
toolchains that require a 64-bit userland.
So, when running on a 64-bit kernel, we believe those toolchains are
available, even when the user is running a 32-bit userland. This causes
build failures for our autobuilders, like so:
http://autobuild.buildroot.org/results/9cd/9cdf10ec5b31144b2e03ea09cf128702339895b3/
with the following symptoms:
>>> toolchain-external undefined Configuring
Cannot execute cross-compiler '/home/test/autobuild/instance-3/output/host/opt/ext-toolchain/bin/aarch64-linux-gnu-gcc'
So, instead of relying on the output of `uname -r`, look for the host
gcc and extract the target it was configured to generate code for.
Fixes:
http://autobuild.buildroot.org/results/9cd/9cdf10ec5b31144b2e03ea09cf128702339895b3/ (aarch64)
http://autobuild.buildroot.org/results/888/8889aa7d9fb48370e4760a6edbc6d3ae945f02f2/ (arm)
and many more...
Besides fixing those issues, it will also allow us to add the 64-bit
variants of toolchains when they exist, like the upcoming Codescape
MTI and IMG toolchains for MIPS from Imagination Technologies.
[Peter: use HOSTCC_NOCCACHE]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the check that packages we build are indeed enabled is done
at the time a package is configured.
This can come quite late in the build process, and does not provide
direct knowledge of the real culprit for the incorrect dependency.
However, we can improve these two issues quite easily, albeit at the
expense of a very slightly more complicated make code.
First, the check can not be done at the time we define the package, i.e.
in the inner-generic-pacakge, because all its dependencies might have
not been parsed yet, so we can't yet know whether it is enabled or not
(because we can't match the package name of the dependency to its
Kconfig variable yet).
But then, we know we have all packages definitions after we scanned the
the bundled packages, kernel, bootloaders and toolchains, as well as the
br2-external tree (if any).
So, at this location, we iterate through the list of enabled packages,
and check that the packages they each depend on are indeed enabled.
This allows us to:
1- do the check very early, before any build action,
2- report on the exact offending package very easily.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ldconfig handling in the main Makefile is utterly broken, as it
calls the build machine ldconfig to generate the ld.so.cache of the
target. Unfortunately, the format of the ld.so.cache is architecture
specific, and therefore the build machine ldconfig cannot be used
as-is.
This patch therefore simply drops using ldconfig entirely, and removes
/etc/ld.so.conf.d/ from the target skeleton. The idea is that all
libraries that should be loaded by the dynamic linker must be
installed in paths where the dynamic linker searches them by default
(typically /lib or /usr/lib).
This might potentially break a few packages, but the only way to know
is to actually stop handling ldconfig.
In order to be notified of such cases, we add a check in
target-finalize to verify that there is no /etc/ld.so.conf file as
well as no /etc/ld.so.conf.d directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some host packages need a recent gcc version. Add symbols to Config.in
to specify the HOSTCC version. The values are passed through the
environment, and this environment is generated in a new support script.
Also update the documentation to mention the new symbols.
[Thomas: simplify by using only make logic instead of an external
shell script.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If RANLIB is set and we're trying to build binutils, binutils will pick
this up and potentially fail to build.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following valgrind error (tested on freescale imx6):
valgrind: Fatal error at startup: a function redirection
valgrind: which is mandatory for this platform-tool combination
valgrind: cannot be set up. Details of the redirection are:
valgrind:
valgrind: A must-be-redirected function
valgrind: whose name matches the pattern: strcmp
valgrind: in an object with soname matching: ld-linux-armhf.so.3
valgrind: was not found whilst processing
valgrind: symbols from the object with soname: ld-linux-armhf.so.3
valgrind:
valgrind: Possible fixes: (1, short term): install glibc's debuginfo
valgrind: package on this machine. (2, longer term): ask the packagers
valgrind: for your Linux distribution to please in future ship a non-
valgrind: stripped ld.so (or whatever the dynamic linker .so is called)
valgrind: that exports the above-named function using the standard
valgrind: calling conventions for this platform. The package you need
valgrind: to install for fix (1) is called
Note that we can still strip the dynamic linker, but only strip the
debugging symbols and nothing else.
[Thomas: slightly adjust comment in the code.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Dumping our 176164 variables can take quite some time (~12s here). What
takes the most time is sorting the variables (~9s), followed by the
parsing of our Makefiles (~3s), with the actual printing in the noise.
However, sometimes only one or a few variables are needed. For example,
one may want to retrieve the Linux build dir from a post-build hook (to
get the Linux' actual .config after our fixups and check for various
features).
Add the possibility to only dump the variables listed in $(VAR) which
must be passed as a make argument, like so:
$ make -s printvars VARS="LINUX_DIR TOPDIR O"
LINUX_DIR=/home/ymorin/dev/buildroot/O/build/linux-4.3 ($(BUILD_DIR)/$(LINUX_BASE_NAME))
O=/home/ymorin/dev/buildroot/O/. (/home/ymorin/dev/buildroot/O/.)
TOPDIR=/home/ymorin/dev/buildroot/buildroot (/home/ymorin/dev/buildroot/buildroot)
It is also possible to use make-appterns, like:
$ make -s printvars VARS="BUSYBOX_%"
This is much faster (the time is just about the time it takes to parse
our Makefiles, 3s here) and easier to parse.
[Thomas: improve comment above the printvars target.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the target uses a merged /usr setup, gdbserver will only report
paths in /lib to the remote gdb, which in turn will only look for
libraries in staging/lib and never in staging/usr/lib.
So. the merged (or non-merged) /usr setup must be replicated in the
staging.
The best solution where to do so is in the skeleton package, since it
is guaranteed to come before any package that installs things in the
staging, and even before the (internal or external) toolchain as well.
Reported-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
distclean is supposed to return the current directory, whether in-tree
or out-of-tree, into pristine conditions, which means we should also
forget about any br2-external tree on distclean.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One of the selling points for br2-external is to provide a mean to add
new packages. However, it is not supported that a package be defined by
Buildroot and then redefined in a br2-external tree.
This situation may occur without the user noticing or even willing to
redefine the package, for example:
- br2-external is first created against a version of Buildroot
- a package (missing in Buildroot) is added to that br2-external tree
- upstream Buildroot adds this package
- user updates to the new Buildroot
In this case, the result in undefined, and we can't make any guarantee
on the result (working or not).
Add a sanity check so that a package redefinition gets caught.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'quiet' variable is set and exported, but it is not used. We can safely
remove it.
This variable is inherited from the Makefile of the Linux kernel, and
is not used in Buildroot.
In support/scripts/mkmakefile, 'quiet' value is checked, but the test
is always true ('quiet' is never set to silent_), so the test can be
removed as well.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: "James Knight" <james.d.knight@live.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow the BR2_CCACHE_DIR .config option to be overriden by the
BR2_CCACHE_DIR env variable.
This is useful for big projects where in some cases the developers home
directory might be a NFS mount (slow) and real production builds aren't.
Update documentation accordingly as well.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit implements a graph-size target that calls the script of
the same name to generate the graph and CSV files related to package
and file sizes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By moving the ccache call to the toolchain wrapper, the following
scenario no longer works:
make foo-dirclean all BR2_CCACHE=
That's a sometimes useful call to check if some failure is perhaps
caused by ccache.
We can enable this scenario again by exporting BR_NO_CCACHE when
BR2_CCACHE is not set, and by handling this in the toolchain wrapper.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The FOO_SITE/FOO_SOURCE variables usually point to a tarball containing
source code.
For the downloaded external toolchains this is not true, the "source"
tarball actually contains binaries. This is fine for making Buildroot
work, but for legal-info we really want to ship real source code, not
binaries.
Luckily, some (hopefully all) toolchain vendors publish a downloadable
tarball containing the source code counterpart for their binary
packages.
Here we allow the user to declare the URL of this other tarball in the
pair of variables FOO_ACTUAL_SOURCE_TARBALL (by default equal to
FOO_SOURCE) and FOO_ACTUAL_SOURCE_SITE (by default equal to FOO_SITE).
If the "actual source" package can be downloaded from the same
directory as the binary package, then only FOO_ACTUAL_SOURCE_TARBALL
needs to be set.
Note this change is not strictly toolchain-specific: it might be useful
for other packages that happen to ship binaries in the same way.
[Thomas:
- remove "the source code has not been saved" warning that could
never be triggered due to how the conditions were
organized. Discussed with Luca live during the meeting.]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages, sudo for instance, install .a and .la files in
$(TARGET_DIR)/usr/libexec. These files are not needed on target.
This patch refactors the existing "find" invocations in
target-finalize into a single one removing all .a and .la files from
lib, usr/lib and usr/libexec.
[Thomas: rework to use a single "find" invocation, and adjusted the
commit log accordingly.]
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The <pkg>-legal-info target is only a component of the top-level
legal-info target, it is not meant to be used alone.
For example, calling twice 'make busybox-legal-info' produces duplicate
entries in licenses.txt and manifest.csv.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After bee5745ccc ("Makefile: don't depend on the umask"), any use
of "make O=<dir>" would leak $O into the enviroment for submakes,
and it's inherited by package makefiles. Some package makefiles have
protections to make sure they don't use the value of $O if it comes from
the enviroment (Linux), but some don't (uClibc).
This caused build failures when using a different output dir.
Fix this by unconditionally unexporting the O variable, since we never
need to have it set in the environment for packages, it should be only
internally used by BR.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit bee5745c introduced an extra level of 'make' when the umask is
different from 0022. However, when several targets were specified on
the command line, a new make instance would be called for each target.
This introduces a huge performance overhead when many targets are
specified on the command line.
To fix this, use the same approach as used in the mkmakefile script:
an addition target on which the MAKECMDGOALS depend, so that this
target is run only once.
Note that the mkmakefile script contains a special exception for
Makefile, because the Makefile in the output directory is generated.
Since the top-level Makefile is not generated, this exception is not
needed here.
While we're at it, also fix the whitespace in the UMASK assignment.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: aggregate patches from Arnout and Guido]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Buildroot release tarballs inadvertently contain a build/docs directory,
containing the manual sources, the generated lists, and manual.text and
manual.pdf (but excluding manual.html).
This directory is populated as $(BUILD_DIR) (==$(O)/build), while O is
set explicitly from the release target to a subdirectory
buildroot-xxxx.yy-git/ which was populated with 'git archive'.
Since the generated manuals are available in docs/manual, which is
also referred to from the README, the build directory is not needed and
should be removed from the release tarball.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Save MAKE_VERSION as RUNNING_MAKE_VERSION since this is later clobbered
by the make package.
It will be used by the webkitgtk24 package to check for older make
versions which have a bug building it with parallel jobs (it hangs).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create a proper package for the skeleton.
The main Makefile is modified to remove the skeleton support.
The 'dirs' target, will create the $(TARGET_DIR).
The file 'output/target/.root' doesn't exists anymore, as there's no
Make rule to statisfy.
The infrastructure are modified to filter host-skeleton.
It's needed becauses the host-dependencies are derived from the
dependencies of the target package where 'host-' is preprended to the
depedency name.
In the pkg-generic we add skeleton as a dependency to every package.
The whole system/system.mk is now removed at the profit of
package/skeleton/skeleton.mk
[Thomas:
- rebase on top of master and fix some minor conflicts
- remove the 'select BR2_PACKAGE_SKELETON' in
BR2_ROOTFS_SKELETON_DEFAULT and BR2_ROOTFS_SKELETON_CUSTOM, since
anyway the skeleton package is always enabled.
- fixup a few mistakes in the getty handling due to misnamed
variables.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The /usr/share/X11/locale/locale.dir file is needed by libX11.
Removing it breaks locale support in X11. However, make removes
not only directories but also all files, which are not listed
in the BR2_ENABLE_LOCALE_WHITELIST.
This re-creates locale.dir database file where needed.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: use a separate loop, and add some explanatory comments]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the man paths have been removed, it is no longer necessary to
grep them out and the loop can be simplified.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These directories are going to be removed anyway, so no point purging
their locales.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use 'rsync -a' to copy the skeleton and overlays, so the target ends
up with the exact same permissions as on the repo. The problem is we
don't track these permissions, since Git doesn't allow for that (except
for the exec bit). This means users with different umasks at the time of
cloning could end up with different target permissions.
Fix this by using --chmod on rsync calls so we don't depend on the
current permission set for the skeleton and overlays. We do depend on
the exec bit, but that's fine since that one is tracked by Git.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages and BR itself create files and directories on the target
with cp/mkdir/etc which depend on the umask at the time of building.
To fix this, use a trick inside the Makefile which wraps all rules when
the umask is not 0022. This sets the umask at the top level, and then
the building process continues as usual.
[Thomas: add --no-print-directory, as suggested by Arnout.]
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of doing a removal of the completion file package per package,
do it all at the finalize stage so it's done once and for all.
Note: This fixes an issue with systemd where passing a --bashcompletiondir
or --zshcompletiondir would be evaluated to '.' by the autotools macro.
This would create a 'target./' directory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add aarch64_be support. Note that CONFIG_CPU_BIG_ENDIAN should be
defined in kernel config when building a big endian kernel.
Signed-off-by: Zhang Jian(Bamvor) <bamvor.zhangjian@huawei.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost and jack2 packages fail to build when PARALLEL_JOBS is empty
so instead of using an empty PARALLEL_JOBS don't use it in the MAKE
variable when top-level parallel make is being used.
To simplify the use of top-level parallel make, check the MAKEFLAGS
variable to know automatically if the -j option is being used, also use
the "=" operator instead of the ":=" operator because the MAKEFLAGS
variable can be checked only in a "recursively expanded variable".
The "override" keyword must be used in order to change the automatic
variable "MAKE".
When the top-parallel make is being used the sub-make are called without
specifying the "-j" option in order to let GNU make share the job slots
specified in the top make. This is done because GNU make is able
to share the job slots available between each instance of make so if you
want to increase the number of jobs you just need to increase the <jobs>
value in the top make -j<jobs> command.
If we specify the -j<jobs> option in each instance of make, it is less
efficient, e.g. in a processor with 8 cores we specify -j9 in each instance:
the number of processes goes up to 81 because each sub-make can execute
9 processes. The excessive number of processes is not a good thing
because in my tests even -j16 is slower than -j9.
Instead if we don't specify the -j<jobs> option in the sub-make, the top
make share the job slots automatically between each instance, so the
number of process in this examples goes up to 9 that is faster than
using up to 81 processes.
e.g. when the -j3 option is specified only in the top make:
possible state n. 1:
process 1 - <packagea>-build
process 2 - <packagea>-build
process 3 - <packagea>-build
possible state n. 2:
process 1 - <packagea>-extract
process 2 - <packageb>-configure
process 3 - <packagec>-build
possible state n. 3:
process 1 - <packagea>-build make -j1
process 2 - <packageb>-build make -j1
process 3 - <packagec>-build make -j1
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMake verbose mode is based on VERBOSE environment variable.
* If VERBOSE is exported but empty, only "Dependee ... is newer than
depender ..." messages are shown.
* If VERBOSE is exported and set (whatever the value), all compilation
commands are shown.
VERBOSE is currently systematically exported by Buildroot, even if it
is empty, in the root Makefile, which implies that the "light" verbose
mode - with "Dependee ... is newer than depender ..." messages - is
always enabled.
VERBOSE should only be exported when V=1, which is the standard way to
enable verbose mode in Buildroot.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_DEFCONFIG should not be present in saved defconfig file.
The use case is:
make qemu_arm_versatile
make savedefconfig BR2_DEFCONFIG=my_custom_defconfig
BR2_DEFCONFIG is set in my_custom_defconfig with an absolute path
to qemu_arm_versatile (value present in .config) and set in
my_custom_defconfig as it is different from default mentioned in
config.in (default is BR2_DEFCONFIG from environment).
On savedefconfig recipe, simply remove BR2_DEFCONFIG from generated file
[Peter: fixup typos and use SED as noted by Arnout]
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is possible to end up with a path containing spaces if the kernel
localversion contains spaces.
Be it good practice or not, there are third party vendors which
distribute kernel configuration files for reference platforms which have
quoted strings containing whitespaces in the localversion.
There was already a fix to handle paths with whitespaces or other
special characters when running strip, which consists of using the find
-print0 and xargs -0 pair of arguments, but the kernel module stripping
wasn't included in the fix.
This commit includes the same fix to the kernel module stripping line.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit, one can now execute the source-check, external-deps
and legal-info targets regardless of the checks normally being done by
packages on the configuration.
Note that we intentionally do not go down the road of adding %-source,
%-legal-info, and the miryad of other targets that could work in such
situations. We only whitelist a few targets that are really useful to
have as nobuild_targets.
[Thomas: also add 'clean' and 'distclean' to the nobuild_targets, as
suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages do some sanity checks on their configuration, for
example linux checks that the defconfig string is not empty when a
defconfig is used. Such checks are currently always performed, except
when the 'source' target is part of make goals.
This is problematic for two reasons:
- Other targets such as 'source-check', 'external-deps' or
'legal-info', that do not consist in doing a build, cannot be
executed in such situations.
- The current code removes the check as soon as one of the targets is
source. But if there are other non-source targets called at the
same time, the checks are ignored.
This commit therefore introduces an internal variable called
BR_BUILDING, which tells packages if we are actually building or
not. A variable nobuild_targets indicates the targets that we do not
consider as being build targets.
For the moment, nobuild_targets only contains 'source', to be
completely iso-functional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that all the external-deps, source-check and source targets are
properly implemented based on the package infrastructure, the
PACKAGES_SOURCE, TARGET_HOST_DEPS, HOST_DEPS and HOST_SOURCE variables
are no longer needed. This is a good thing since they were anyway
incorrect, as they were only doing a two level recursion in the
dependencies of host packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[tested with a randpackageconfig]
Now that all the bits are in place, switch the global 'source' target
to use the package infrastructure logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[with 'make source' (actually together with the next patch).]
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[tested with a randpackageconfig]
This commit switches the implementation of the global source-check
target to use a package infrastructure based mechanism, using the
$(1)-all-source-check target added in the previous commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
make source-check is here to check whether the remote sources for the
current selection of packages are still available. In its current
implementation, since it simply calls recursively a sub-make with the
source target, it can be a noconfig_targets. However, a follow-up
change will make source-check not use a sub-make, which will require
it to no longer be a noconfig_targets.
Therefore, as a preparation, this commit moves source-check outside of
noconfig_targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit changes the global 'external-deps' target to use the newly
introduced per-package <pkg>-all-external-deps, instead of relying on
the 'source' target with a custom DL_MODE.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When listing defconfig files was moved to its own make target, it was
not added to the general help text.
However, this is a very important topic, so list it.
[Peter: drop ':' character]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some systems (e.g. Fedora 20), the build breaks when parsing include
directives in our /etc/ld.so.conf, with error messages as thus:
/sbin/ldconfig: need absolute file name for configuration file
when using -r
So, enforce the path to the ld.so.conf file to point to our own, in the
target/ directory.
Reported-by: Al West <al.west@v-nova.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first dependency of these targets is
$(BUILD_DIR)/buildroot-config/*conf
so the $(BUILD_DIR)/buildroot-config directory certainly exists.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
show-targets is only used currently by the graph-depends script, which
already recurses into the dependencies of the selected packages to
build the dependency graph. Therefore, dumping the contents of
$(PACKAGES) and $(ROOTFS_TARGETS) is sufficient: $(HOST_DEPS) and
$(TARGET_HOST_DEPS) will contain packages that are dependencies of
packages already listed in $(PACKAGES), which graph-depends will
discover by itself.
This allows to remove one more usage of $(HOST_DEPS) and
$(TARGET_HOST_DEPS), which is one more step towards their removal.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit changes the implementation of the global 'legal-info'
target to use the newly introduced per-package <pkg>-all-legal-info
target. This allows to avoid using the $(TARGET_HOST_DEPS) and
$(HOST_DEPS) variables that we are trying to remove.
It is worth mentionning that this commit might change the output of
'make legal-info' by making it more correct than it was. With the
existing implementations, we could be missing packages if they were
host packages, or target packages not properly selected in terms of
Config.in dependencies, and with a more than a two-level deep
dependency from a target package properly selected at the Config.in
level. This is because our previous logic was simply taking all
packages in the "TARGETS" (now called "PACKAGES") variable, which are
only the target packages explicitly selected in the .config file, and
doing a two-level deep recursion in the dependencies.
With this commit, we switch legal-info to use proper make-based
dependencies, so we no longer have the limitations we used to
have. For this reason, the output of 'make legal-info' after this
patch may contain *more* entries than before this patch, but it is
really because it is now correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The main Makefile was declaring a subset of the per-package targets as
being PHONY, but not all of them. Now that the pkg-generic package
infrastructure is taking care of that in a much more systematic
fashion, this commit gets rid of the unneeded code from the main
Makefile.
[Thomas: re-add list-defconfigs to the list of PHONY targets, as
noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
