To update the .gitlab-ci.yml file, we run run-tests -l to list all the
tests and post-process the output in a format suitable for
.gitlab-ci.yml. However, in a pipeline, it is the last command that
gives the return value. In addition, we have to redirect stderr of
run-tests -l because nose2 prints the tests on stderr, not stdout. Thus,
when run-tests -l fails, the update of .gitlab-ci.yml silently succeeds
but no tests are included in the .gitlab-ci.yml.
To fix this, set the pipefail option. This is bash-specific, but our
Makefile ascertains that we are running with bash as the shell (if bash
is available, but if it is not, dependencies.sh will error out). The
error message is still invisible, but at least make will fail.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This adds one column to the legal-info manifest table. It contains the
dependencies of the given package and their licenses. This information
is useful when assessing license compatibility of the packages and
their libraries.
An example of the content of the new column for the MPD package is
shown below:
"alsa-lib [LGPL-2.1+ (library), GPL-2.0+ (aserver)] boost
[BSL-1.0] libid3tag [GPL-2.0+] libmad [GPL-2.0+] libogg
[BSD-3-Clause] libvorbis [BSD-3-Clause] libzlib [Zlib]
skeleton-init-common [unknown] skeleton-init-sysv [unknown] sqlite
[Public domain] toolchain-external-linaro-arm [unknown]"
[Credits to Yann E. MORIN <yann.morin.1998@free.fr> for suggesting a
few simplifications.]
Signed-off-by: Michal Sojka <sojka@merica.cz>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The last parameter {HOST|TARGET} is now first. With this change,
adding new columns to the legal manifest file (as in the next commit)
will be slightly easier to review.
Signed-off-by: Michal Sojka <sojka@merica.cz>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc does not build when the srcdir path contains a '@', because that
path is then substitued in a texi file as argument to an @include
directive. But then, the '@' in the path will start a command evaluation
of its own, thus breaking the build. For example, with a $(O) path set
to /home/ymorin/dev/buildroot/O/to@ti :
perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/invoke.texi > gcc.pod
../../gcc/doc/invoke.texi:1678: unknown command `ti'
../../gcc/doc/invoke.texi:1678: @include: could not find /home/ymorin/dev/buildroot/O/to/build/host-gcc-initial-7.3.0/build/gcc/../../gcc/../libiberty/at-file.texi
[Peter: use findstring instead of subst/compare]
Reported-by: c32 on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables a riscv64 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This configuration has been used to successfully build a qemu-bootable
riscv-linux-4.15 kernel (https://github.com/riscv/riscv-linux.git).
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- simplify arch.mk.riscv by directly setting GCC_TARGET_ARCH
- simplify glibc.mk changes by using GLIBC_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GCC_TARGET_* configuration variables are copied to
corresponding GCC_TARGET_* variables which may then be optionally
modified or overwritten by architecture specific makefiles.
All makefiles must use the new GCC_TARGET_* variables instead
of the BR2_GCC_TARGET_* versions.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: simplify include of arch/arch.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The underlying problem is that $(foreach V,1 2 3,) does not evaluate to
an empty string. It evaluates to " ", three empty strings separated by
whitespace.
A construct of this format, with a giant list in the foreach, is part of
the printvars command. This means that "@:$(foreach ....)", which is
intended to expand to a null command, in fact expands to "@: "
with a great deal of whitespace. Make chooses to execute this command
with:
execve("/bin/sh", ["/bin/sh", "-c", ": "]
But with far more whitespace. So much that it can exceed shell command
line length limits.
This solution is to move the foreach to another step in the recipe. The
"@:" is retained as the first line so the recipe is not Empty, which
would cause a change in make behavior when make builds the target. The
2nd line, all whitespace, will be skipped by make.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the wording in the manual instructs the user to generate a
tarball from "the contents of the +output/host+ directory".
This is pretty confusing, because taken literally, this would amount to
running a command like:
tar cf my-sdk.tar -C output/host/ .
This creates a tarbomb [0], which is very bad practice, because when
extracted, it creates multiple files in the current directory.
What one really wants to do, is create a tarball of the host/ directory,
with something like:
tar cf my-sdk.tar -C output host/
However, this is not much better, because the top-most directory would
have a very common name, host/, which is pretty easy to get conflict
with when it gets extracted.
So, we fix that mess by giving the top-most directory a recognisable
name, based on the target tuple, which we also use as the name of the
archive (suffixed with the usual +.tar.gz+.) We offer the user the
possibility to override that default by specifying the +BR2_SDK_PREFIX+
variable on the command line.
Since this is an output file, we place it in the images/ directory.
As some users expressed a very strong feeling that they do not want to
generate a tarball at all, and that doing so would badly hurt their
workflows [1], we actually prepare the SDK as was previously done, but
under the new, intermediate rule 'prepare-sdk'. The existing 'sdk' rule
obviously depend on that before generating the tarball.
We choose to make the existing rule to generate the tarball, and
introduce a new rule to just prepare the SDK, rather than keep the
existing rule as-is and introduce a new one to generate the tarball,
because it makes sense to have the simplest rule do the correct thing,
leaving advanced, power users use the longest command. If someone
already had a wrapper that called 'sdk' and expected just the host
directory to be prepared, then this is not broken; it just takes a bit
longer (gzip is pretty fast).
Update the manual accordingly.
[0] https://en.wikipedia.org/wiki/Tar_(computing)#Tarbomb
[1] http://lists.busybox.net/pipermail/buildroot/2018-June/thread.html#223377
and some messages in the ensuing thread...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Stefan Becker <chemobejk@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: "Yann E. MORIN" <<a href="mailto:yann.morin.1998@free.fr" target="_blank">yann.morin.1998@free.fr</a>><br>
Reviewed-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: "Yann E. MORIN" <<a href="mailto:yann.morin.1998@free.fr" target="_blank">yann.morin.1998@free.fr</a>><br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The snippet of code that runs a check-package on all
.mk/.hash/Config.in files is currently only available within
.gitlab-ci.yml, and isn't immediately and easily usable by Buildroot
users. In order to simplify this, this commit introduces a top-level
"check-package" make target that implements the same logic. The
.gitlab-ci.yml file is changed to use "make check-package".
Since this target is oriented towards Buildroot developers, we
intentionally do not clutter the already noisy "make help" text with
this additional make target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The help text says that BR2_DEFCONFIG will be used as input, but a
BR2_DEFCONFIG specified in the existing .config file will *not* be
used. So say explicitly that it must be specified on the command line.
Note that both "BR2_DEFCONFIG=... make defconfig" and
"make defconfig BR2_DEFCONFIG=..." will work.
While we're at it, add a semicolon to separate the two statements.
Note that this overflows the help text beyond 80 characters, but that
is already the case in many other lines.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The systemd ConditionNeedsUpdate option is useful when offline updates
of the vendor operating system resources in /usr require updating of
/etc or /var on the next following boot.
Two examples of services making use of this option are
systemd-hwdb-update.service and systemd-sysusers.service.
ConditionNeedsUpdate=/etc will be true if the mtime of /etc/.updated
is older than the mtime of /usr. After services conditional on
ConditionNeedsUpdate have run, systemd-update-done.service will
synch the mtime of /usr to /etc/.updated so that the condition will
be false on subsequent boots.
For systems with writable /usr partitions where updates are done to
the running system, the update program will touch /usr as a final step.
But with Buildroot, where updates are often done by dumping a new
image onto the device, and where /usr is on a filesystem mounted
read-only, touching /usr as part of the update process is not practical.
Instead, it should be done a build time.
For testers, please note that systemd-update-done in v234 added a
regression where the mtime of /etc/.updated is set to the current time
instead of the mtime or /usr. This will be fixed in v239.
For more details, see:
http://0pointer.de/public/systemd-man/systemd.unit.htmlhttp://0pointer.de/public/systemd-man/systemd-update-done.service.html
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For reproducible builds, SOURCE_DATE_EPOCH will be set to the git commit
date if it is not defined in the environment, but this was done by
explicitly using $(TOPDIR)/.git as the git repository, which would not
give the expected result if Buildroot had been put into a subdirectory
of another repository.
This commit removes that restriction, meaning that the default date will
now be the date of the git commit that contains Makefile, regardless of
what level above Makefile the repository is at. This works because the
current directory when the 'git log' command is executed will always be
the directory containing Makefile (it must be, since TOPDIR is set from
CURDIR).
In general this should be a sensible default, and in cases where a
different date is required SOURCE_DATE_EPOCH can be defined in the
environment before invoking make.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If SOURCE_DATE_EPOCH is not defined it was given a definition that
caused 'git log' to be executed each time the variable is referenced,
which is not very efficient given that the answer cannot change.
This commit moves the definition of BR2_VERSION_GIT_EPOCH after the
inclusion of Makefile.in (so that GIT is defined) and makes it a
simply expanded variable so that it is only evaluated once.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the support for <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends which respectively show the list of all
dependencies or reverse dependencies for a given package. The existing
show-depends and show-rdepends only show the first-level dependencies,
while show-recursive-depends and show-recursive-rdepends show
recursively the dependencies.
It is worth mentioning that while show-recursive-depends really shows
all dependencies, show-recursive-rdepends is a bit limited because the
reverse dependencies of host packages are not properly accounted
for. But that's a limitation that already exists in show-rdepends, and
that cannot easily be solved.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- split from the patch that was also changing graph-depends
- rename show-rrdepends to show-recursive-rdepends
- add show-recursive-depends
- don't create GRAPHS_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was present in Yann's original patch, but got dropped when I rebased
commit 7e9870ce32 (core: introduce intermediate BASE_TARGET_DIR variable) to
fix the Makefile conflicts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each of the intermediate, per-rootfs target directories, as well as the
intermediate tarball, can take quite some place, and is mostly a
duplication of what's already in target/. The only delta, if any, would
be the tweaks made by the filesystem image generations, but those tweaks
are most probably only meaningful when seen as root.
We normally do not remove intermediate files, but those can be quite
large, and are not directly usable by, nor accessible to the user.
So, get rid of them once the filesystem has been generated.
This does not need to be done in fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... which for now still points to the base target directory, but this is
a step forward.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like we do for packages with the PKG variable, set ROOTFS to contain the
upper-case name of the rootfs currently being generated.
This will be useful in later patches, when we need more per-rootfs
variables, like a per-rootfs TARGET_DIR for example.
In Makefiles, per-rule variables trickle down the dependency chain, to
all dependencies of that rule, so we have to stop ROOTFS as soon as
we're not in a rootfs. This means we have to stop it at target-finalize
(which is a dependency of all filesystems), and for each package
individually, since some packages (host or target) can be direct
dependencies of filesystems as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new BASE_TARGET_DIR variable is set in stone to point to the real
location where packages will be installed. Its name is modelled after
its definition: it is located in $(BASE_DIR), and it is named 'target/',
hence BASE_TARGET_DIR.
The already-existing TARGET_DIR variable now simply points to the same
location, except that it is recursively expanded, so that we can later
change it depending on the context.
All locations that really need to reference the existing target/
directory, are changed to use BASE_TARGET_DIR; surprinsigly enough, they
all seem to be located in the main Makefile. :-) The rest is left with
using good-old TARGET_DIR.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If BR2_HOST_DIR is not the default, it can be difficult to find the
host directory (i.e., HOST_DIR always has to be passed explicitly in
addition to the output directory). For example, the Eclipse plugin
assumes that HOST_DIR=BASE_DIR/host.
Create a symlink from $(BASE_DIR)/host to $(HOST_DIR) if it is not the
default. Also remove it in the clean target.
When BR2_HOST_DIR is the default, HOST_DIR_SYMLINK will be empty so
there will be no additional dependency to dirs and nothing to remove
in clean.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10151
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
HOST_DIR is defined twice: once to its default value before .config is
included, and once more to BR2_HOST_DIR after .config is included.
However, the rule that defines the mkdir for HOST_DIR comes between
these two, so it will always use the default definition. Therefore,
if a non-default BR2_HOST_DIR is used, there will be no rule to create
that directory, while the dirs target depends on it.
This happens to work at the moment, because in the dirs target,
$(STAGING_DIR) comes before $(HOST_DIR), so $(HOST_DIR) will be created
implicitly. However, this will fail in top-level parallel builds where
both will be created in parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After commit 6729050f3a nothing creates
$(HOST_DIR)/share/buildroot anymore, causing sdk to fail with:
/bin/bash: .../output/host/share/buildroot/sdk-location: No such file or directory
Add creation of that directory to the "sdk" build steps itself.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that DEPENDENCIES_HOST_PREREQ is no longer used anywhere, we can
kill it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit moves the host-fakedate dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper regular dependency handled by the
package infrastructure.
host-fakedate is added as dependency to all packages, except
host-skeleton, because we depend on it.
In addition, we make sure that host-fakedate does not grow a
dependency on host-{tar,xz,lzip,ccache} to avoid circular
dependencies. host-fakedate does not need any extraction tool and does
not need to build C/C++ code (the source code is just a shell script
available in Buildroot).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the per-package SDK work, we want to avoid having logic
that installs files to the global HOST_DIR, and instead do it inside
packages. One thing that gets installed to the global HOST_DIR is the
minimal "skeleton" that we create in host:
- the "usr" symbolic link for backward compatibility
- the "lib" directory, and its lib64 or lib32 symbolic links
This commit moves this logic to a new host-skeleton package, and makes
all packages (except itself) depend on it.
While at it, use $(Q) instead of @ in the HOST_SKELETON_INSTALL_CMDS.
[Peter: drop host-patchelf reference in commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages really want to use an UTF-8 locale, or they break.
However, there is no guarantee that any given locale is available on a
system. For example,, while most mainstream distros (Debian and
derivatives, Fedora...) do have the generic, language-agnostic C.UTF-8
locale, Gentoo does not provide it.
So, find the first UTF-8 locale available on the system, and take any
that is available. We however do favour using the user-set current
locale, then using the language-agnostic C.UTF-8, and eventually any
random UTF-8 locale.
Note: we only need to enforce LC_ALL, because setting it implies
everything else:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
"""
1. If the LC_ALL environment variable is defined and is not null,
the value of LC_ALL shall be used.
"""
[Peter: use same regexp as in dependencies.sh]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is recommended that vendor trees store OS release information
in /usr/lib/os-release and that /etc/os-release should be a relative
symlink to /usr/lib/os-release.
For more details, see:
http://0pointer.de/public/systemd-man/os-release.html
[Peter: don't hide command, simplify ln invocation]
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This feature is not used by anyone in the core developpers and makes a
drastic simplification of the pkg-download infrastructure harder.
The future patch will move much of what's in the current pkg-download.mk
file into the dl-wrapper which is a shell script.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, enabling more than one filesystem image will make
'show-targets' list a few host packages more than once.
This is because all filesystem images add the same set of
host-packages to their dependencies, which are then added as-is
to the package list.
Thus, host-fakeroot, host-makedevs and, if needed, host-mkpasswd will
appear as many times as there are filesystem images enabled.
Fix that by sorting the package list, thus eliminating duplicates from
that list. Also sort the rootfs list for good measure. Sort the two
separately, so that rootfses are last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we do nothing about packages that touch the same file: given
a specific configuration, the result is reproducible (even though it
might not be what the user expected) because the build order is
guaranteed.
However, when we later introduce top-level parallel build, we will no
longer be able to guarantee a build order, by the mere way of it being
parallel. Reconciliating all those modified files will be impossible to
do automatically. The only way will be to refuse such situations.
As a preliminary step, introduce a helper script that detects files that
are being moified by two or more packages, and reports them and the
impacted packages, at the end of the build.
The list being reported at the end of the build will make it prominently
visible in autobuilder results, so we can assess the problem, if any.
Later on, calling that helper script can be done right after the package
installation step, to bail out early.
Thanks Arnout for the pythonist way to write default dictionaries! ;-)
Note: doing it in python rather than a shell script is impressively
faster: where the shell script takes ~1.2s on a minimalist build, the
python script only takes ~0.015s, that is about 80 times faster.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: rename script without .py extension.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'include' directive in GNU make supports wildcards, but their
expansion has no defined sort order (GLOB_NOSORT is passed to glob()).
Usually this doesn't matter. However, there is at least one case where
it does make a difference: toolchain/*/*.mk includes both the
definitions of the external toolchain packages and
pkg-toolchain-external.mk, but pkg-toolchain-external.mk must be
included first.
For predictability, use ordered 'include $(sort $(wildcard ...))'
instead of unordered direct 'include */*.mk' everywhere.
Fixes [1] reported by Petr Vorel:
make: *** No rule to make target 'toolchain-external-custom', needed by '.../build/toolchain-external/.stamp_configured'. Stop.
[1] http://lists.busybox.net/pipermail/buildroot/2017-November/206969.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: also sort the one remaining include, of the external docs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).
However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/
Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.
Abide by the rule, and only set it if not already set.
This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It is used by Kconfig's merge_config.sh.
No alldefpackageconfig is added, since it's rather pointless: it would
only enable busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules for the *config targets are all very similar, so factor them
together using $@.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some macros, soon some variables, currently defined in the skeleton are
going to be used by other packages.
Some of those variables will be used as Makefile conditions (e.g. in
ifeq() conditions), so they *must* be defined before being used.
Since the skeleton package, starting with an 's', is included quite
late, those variables would not be available to most packages.
Offload the existing macros into the new system/system.mk file, that is
included early, before any package is. Rename the macros to appropriate
names.
Future commits will add new macros and variables in that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a separate make target to build a relocatable SDK. We first
sanitize the RPATH in host tree. Next we also sanitize the
staging tree. Therefore "sdk" must depend on world.
Sanitizing staging is not really needed, in the sense that any rpath
in there is simply not going to be used. We want to sanitize staging
for the following reasons:
- To avoid leaking references to the original output directory. This
way, we can validate that the SDK is relocatable by running a simple
"grep -r ${BASE_DIR} ${HOST_DIR}". Obviously RPATH sanitization is
not sufficient (e.g. also the references to source files have to be
stripped), but it's a step in the right direction. This reason is
obviously only relevant for the SDK.
- To make sure that when an executable is copied to target that it
actually executes correctly. Since within Buildroot we never copy
stuff from staging to target, this is clearly only relevant for
the SDK.
Finally we install the script "relocate-sdk.sh" into the top directory
of the SDK (HOST_DIR) and the SDK location path is stored in the file
"HOST_DIR/share/buildroot/sdk-location"-
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We sanitize the RPATH of ELF files in the target tree to deal
with stupid packages that don't correctly use --prefix/DESTDIR
and that end up putting the full absolute build-time directory
in the RPATH.
We do it before copying the overlay and calling the post-build
script. The user is completely responsible for what happens
in the last two steps, and it should never be touched by us.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up to now we created the $(HOST_DIR)/usr compatibility symlink as part
of the creation of $(HOST_DIR) itself. However, when the user specifies
a custom BR2_HOST_DIR, it is possible that the directory already exists
so this rule will never trigger.
Therefore, add an explicit rule for creating $(HOST_DIR)/usr and add
this rule to the dependencies of the dirs target. HOST_DIR itself goes
back to the standard rule for directories. The order-only dependency of
STAGING_DIR isn't needed any more either: HOST_DIR is implicitly
created if needed by mkdir -p, and we don't need to trigger the
HOST_DIR rule any more if the directory already exists.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This silences the annoying warning that there is no hash file for our
own COPYING file.
Also change the message so that it is more obvious what we're doing.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/usr is a symlink to $(HOST_DIR), it makes no sense to
still have it in BR_PATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into $(HOST_DIR)/usr/lib without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/lib to ../lib.
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we also have to update the
check-host-rpath script to accept both $(HOST_DIR)/usr/lib and
$(HOST_DIR)/lib, because depending on how the package derives the
path, it may be different.
Since there are some dependency chains that involve $(STAGING_DIR),
$(STAGING_DIR) may in fact be created before $(HOST_DIR). Since
$(STAGING_DIR) is a subdirectory of $(HOST_DIR), it is possible that the
newly added rule for $(HOST_DIR) never triggers. To make sure that the
rule does trigger, add an order-only dependency from $(STAGING_DIR) to
$(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into
$(HOST_DIR)/usr/$(GNU_TARGET_NAME) (i.e., binutils and gcc) without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/$(GNU_TARGET_NAME) to
../$(GNU_TARGET_NAME).
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
Effectively, the usr/ part is removed from $(STAGING_SUBDIR) (and
therefore from $(STAGING_DIR)), so update the definition of that
variable right away.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will be useful when checking the hashes of the license files.
[Peter: use '.' as buildroot directory so /buildroot.hash isn't checked]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to error out instead of running menuconfig when no .config
is available broke an existing use case:
make O=output-foo; cd output-foo; br-init-conf (or similar to get a sensible .config); make
As there is no wrapper makefile in output-foo.
Fix it by ensuring the wrapper gets created if needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit improves our .gitlab-ci.yml logic to execute our runtime
tests located in support/testing/. To do so, this commit:
- Adds more Debian packages to be installed, namely the nose2 and
pexpect packages needed by the runtime testing infrastructure, as
well as the necessary Qemu emulators
- The description of how to run the runtime tests. Each test is
executed as a separate Gitlab CI job, so that the status of each
test is easily visible in the Gitlab CI web interface.
- The Makefile is improved to auto-generate .gitlab-ci.yml from
.gitlab-ci.yml.in, like we're doing for defconfigs. Since the
dependencies of .gitlab-ci.yml are no longer correct, we abandon
them and instead make it a PHONY target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: simplify .gitlab-ci.in a little, removing redundant stuff;
make .gitlab-ci.yml a PHONY target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since forever, we run 'menuconfig' automatically on an unconfigured
tree. However, this does not help users that much:
- If they read the documentation, they should already know to run
make menuconfig first.
- If they haven't read the documentation, dropping them in menuconfig
isn't very helpful.
- It's a likely that the user didn't intend to be in an unconfigured
tree (e.g. wrong O= specified), so starting menuconfig (and polluting
this wrong O= directory) is not very helpful.
- It's possible that the user really doesn't want menuconfig, but
instead needs xconfig, or some defconfig, or ...
So, instead of trying to guess what the user needs, print an error and
let the user decide what to do next.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Alessandro Power on StackOverflow [1], the behaviour
of "make toolchain" in an unconfigured tree is misleading.
When .config doesn't exist, we don't read in the package .mk files, so
"make <package>" doesn't work:
$ make busybox
make: *** No rule to make target 'busybox'. Stop.
However, for "linux" and "toolchain", the corresponding file (or
actually directory) already exists. So instead, we get:
$ make linux
make: Nothing to be done for 'linux'.
This is confusing, because it looks as if the build succeeded.
The obvious solution is to make linux and toolchain PHONY targets when
.config doesn't exist. However, that actually does the reverse, because
then a rule _does_ exist for them and since they don't have
dependencies, make will consider them to be ready.
Therefore, we also have to provide an explicit rule for them, and
explicitly error out. Thise behaviour is still different from other
packages, but at least it is much less confusing.
[1] https://stackoverflow.com/questions/44521150
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.
To avoid this, make sure there is a shell command by adding :.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:
- it is more difficult to see if a target is missing from PHONY;
- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
but some of these targets are also defined when there is no .config;
in that case, these targets are not declared as PHONY.
Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.
The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This simplifies the variable a little
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain is a package, so it is already defined as .PHONY in the
inner-generic-package macro.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When debugging hidden dependencies, the build order is very important.
Most notably, it is interesting to identify potential culprits.
Add a new top-level rule, show-biuld-order, that dumps all the packages
in the order they would get built.
Note that there are a few differences with show-targets:
- more packages are reported, becasue show-targets does not report
host packages that have no prompt;
- the output is line-based, because we're using $(info $(1)); getting
a single output line like show-targets would require we use an
actual command, like printf '%s ' $(1); but that takes a lot of
time, while $(info $(1)) is almost instantaneous (the time to parse
the Makefiles);
- rootfs targets are not reported.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the output of printvars copntains the name of the variable,
its expanded value and its un-expanded value.
However, most of the time, we need the actual, expanded value, so it can
be re-used from a (non-Buildroot) infrastructure script, like a
post-build script, or a build-farm driver (e.g. a Jenkins job...)
Add two options that a user may set to change the output of printvars:
- QUOTED_VARS, if set, will quote the value
- RAW_VARS, if set, will print the unexpanded value
The new output by default only prints the expanded value now.
So that it can be used as such:
$ make -s printvars VARS=BUSYBOX_VERSION
BUSYBOX_VERSION=1.26.2
$ make -s printvars VARS=BUSYBOX_RDEPENDENCIES QUOTED_VARS=YES
BUSYBOX_RDEPENDENCIES='ncurses util-linux'
$ make -s printvars VARS=BUSYBOX_FINAL_PATCH_DEPENDENCIES RAW_VARS=YES
BUSYBOX_FINAL_PATCH_DEPENDENCIES=$(sort $(BUSYBOX_PATCH_DEPENDENCIES))
And it is even possible to directly evaluate it in a shell script:
eval $(make -s printvars VARS=BUSYBOX_VERSION QUOTED_VARS=YES)
Backward compatibility of the output is not maintained. It is believed
that scripts that depended on the previous output were very fragile to
begin with, because they had to filter the non-formatted output
(splitting on spaces or braces was not really possible, because values
could contain either).
Document printvars and its options in the manual; list it in the output
of 'make help'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow architectures to define variables and helper macros.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildroot repository is now mirrored on
https://gitlab.com/buildroot.org/buildroot so we can use Gitlab-CI to
test Buildroot. Gitlab-CI is controlled by a .gitlab-ci.yml file
that exists in the repository.
For now, the only test is building all defconfigs (inspired on
https://travis-ci.org/buildroot/buildroot-defconfig-testing/). Since
all the defconfigs have to be specified in the .gitlab-ci.yml file,
we generate the file based on .gitlab-ci.yml.in. The generated
.gitlab-ci.yml file has to be committed into the repository, though,
otherwise Gitlab-CI doesn't see it. So there is also a test to verify
that .gitlab-ci.yml is up-to-date.
Building all the defconfigs takes a long time. Gitlab-CI will do that
every time it pulls from git.buildroot.org, which is once per hour.
That is way too often. Therefore, the defconfigs are not built on pull,
but only on explicit trigger through the API or when a tag is added.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- fix typo not -> no
- add LC_ALL=C when calling 'ls -1' to get a predictable order of the
defconfigs
- regenerate .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit teaches the generic package handling code how to extract .tar.lz
archives. When lzip is not installed on the host, host-lzip gets built
automatically.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When GCC_COLORS is set, ccache passes '-fdiagnostics-color' to GCC but
this flag requires GCC v4.9 or later. Older versions complain about the
unrecognized command line option.
Using GCC_COLORS in the context of Buildroot is seldom useful, so we
just unexport GCC_COLORS altogether.
Reported-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable fakedate for whole build process.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit f71a621d91, we are using the
SED variable in the main Makefile. However, this variable is only
defined in package/Makefile.in, which gets included only when a
configuration is defined.
This means that, if you do:
$ make menuconfig savedefconfig
without a configuration defined, it fails with:
/bin/bash: /BR2_DEFCONFIG=/d: No such file or directory
Makefile:898: recipe for target 'savedefconfig' failed
make[1]: *** [savedefconfig] Error 127
This issue affects users of the "buildroot-submodule" project, which
does menuconfig+savedefconfig automatically. They worked around this
issue in commit
d12676b608,
but really "make menuconfig savedefconfig" should work out of the box.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 173135df5b ("core: re-enter make if
$(CURDIR) or $(O) are not canonical paths") introduced the CANONICAL_O
variable, defined as:
CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
This duplicates the definition of BASE_DIR, by different means:
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
So one of these shell calls is redundant. CANONICAL_O is defined first,
so this commit replaces the BASE_DIR derivation with $(CANONICAL_O).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The distclean target no longer removes the "output" directory for
in-tree builds, because $(O) is no longer just "output" in that
case. Change the test to be against "$(CURDIR)/output", to match
the O setting, and a similar test elsewhere in the same Makefile.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make may throw an error (but ignored) trace when cleaning up the
rootfs.
The target-finalize rule intends to remove the folder
`$(TARGET_DIR)/usr/share' but this directory may still contain items
(such as the `udhcpc' helper script) and causes the rmdir to fail.
The stderr output is redirected to /dev/null but it returns and error
which is escaped by the leading `-'; but make reports an ignored-error.
See the log below:
$ make
(...)
rm -rf (...)/target/usr/share/gtk-doc
rmdir (...)/target/usr/share
rmdir: failed to remove '(...)/target/usr/share': Directory not empty
make[1]: [Makefile:650: target-finalize] Error 1 (ignored)
find /(...)/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 (...)/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
This patch apply the same rule at the instruction immediately after:
* redirecting stderr to /dev/null (already done) and
* executing true if the `rmdir' instruction fails.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a space before and after the equal sign when defining the TZ, LANG
and LC_ALL variables, as suggested by the Buildroot coding style.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default invocation to gzip include timestamp in output file. This feature is
incompatible with BR2_REPRODUCIBLE. It is possible to disable it with '-n'.
The environment variable GZIP can hold a set of default options for gzip. So
instead to find all gzip invocation in build process, we just export 'GZIP=-n'.
Notice bzip2, lzma and xz are not impacted by this problem. On the other hand, lzop
does include timestamp and does not provide any way to disable it.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When reproducibility is requested, generate a global SOURCE_DATE_EPOCH
environment variable which contains either the date of Buildroot last
commit if running from a git repository, or the latest release date.
This means that all packages embedding build dates will appear to
have the same build date, so in case of new commit or release, all
packages will appear to have been changed, even though some of them
may not have changed in fact.
The meaning of SOURCE_DATE_EPOCH is specified by the following
specification:
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently some buildroot targets fails (list-defconfigs,
graph-build, etc), if there is an issue with configuration.
For example, enabling uboot package without providing custom
version name results in failing of various targets.
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: as suggested by Arnout, added printvars and savedefconfig to
nobuild_targets.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If 'lib' is a symlink (as is the case when BR2_ROOTFS_MERGED_USR=y),
'find lib' does not return the correct result. So, until now,
libpthread*.so* and ld-*.so* were not stripped when 'lib' was a symlink.
We fix this by using 'find lib/' instead of 'find lib'. For consistency
reason, we also do the same change for the 'find' that removes .a and
.la files.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: slightly improved the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't use the default implicit rules that are added by make, so
they just slow down the Makefile processing. The default implicit
rules can be removed by defining an empty .SUFFIXES: target.
This speeds up the start of the build on my machine from 5.6s to
4.9s.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The top-level Makefile contains an "override O := $(O)" statement that
is purportedly required to make sure the O flag doesn't leak into the
environment of sub-makes. However, since commit 173135d, there is
already an "override O := ..." a few lines down. Therefore, the first
override is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We reset MAKEOVERRIDES to avoid passing down variables that are
overridden on the command line to the package build systems. Indeed,
the variables overridden on the command line will be Buildroot
variables and not relevant to the package build system. In particular
the O option is used by some packages and the value passed in on the
command line is plain wrong for the individual package.
However, in commit 916e614b, MAKEOVERRIDES was moved earlier and it
was reset _before_ re-entering make in the cases when something has
to be fixed up (incorrect umask, non-absolute paths in O or CURDIR).
Therefore, if make is re-entered, any command line overrides are lost.
This particularly bites the autobuilders, because they use
O=<relative path> to specify the output directory, and they add
BR2_JLEVEL=... to avoid starting too many jobs in parallel. The
BR2_JLEVEL override is lost.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can dump the reverse dependencies of a package, add the
ability to graph those.
It does not make sense to do a full reverse graph, as it would be
semantically equivalent to the direct graph. So we only provide a
per-package reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finding the packages that select another one in a specific configuration
is not very trivial:
- when optional, the dependency is not expressed in Kconfig
- looking at the .mk files is not very nice.
Introduce a way to dump reverse dependencies of packages, i.e. the list
of packages that directly depend on that package. Like for direct
dependencies, we limit the list to the first-order reverse dependencies.
Document it in the main help; use the opportunity to also document
foo-show-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When $(CURDIR) and/or $(O) contain symlinks in their paths, they can be
resolved differently, depending on each package build-system (whether it
uses the given paths or get the absolute canonical ones).
Using absolute canonical paths will help achieving reproducible builds and
will make easier tracking down host machine paths leaking into the host,
target or staging trees.
So, this change ensures the build takes place with the CURDIR and O
variables are set to their absolute canonical paths.
In order to recall the toplevel makefile with absolute canonical paths
for $(CURDIR) and $(O), we need to:
1- Compute the absolute canonical paths for $(CURDIR) and $(O) that will
be passed to the sub-make. This is achieved using the 'realpath' make
primitive. However, some care must be taken when manipulating O:
- the out-of-tree makefile wrapper happens a trailing "/.", we need
to strip this part away to not break the comparison driving the
sub-make call;
- the user can leave a trailing '/' to $(O);
- according to [1,2], realpath returns an empty string in case of
non-existing entry. So, to avoid passing an empty O= variable to
sub-make, it is necessary to define the output directory and create
it prior to call realpath on it (because on the first invocation,
$(O) usually does not yet exists), hence the trick doing the mkdir
right before calling realpath.
2- Update EXTRAMAKEARGS with the absolute canonical $(O) and use it
when call recalling the top-level makefile with umask and paths
correctly set.
3- Lastly, update the condition for setting the CONFIG_DIR and
NEED_WRAPPER variables.
Note:
* This change takes care of the makefile wrapper installed in $(O) to
avoid unneeded make recursion.
[1] https://www.gnu.org/software/make/manual/html_node/File-Name-Functions.html
[2] http://man7.org/linux/man-pages/man3/realpath.3.html
Reported-by: Matthew Weber <matt@thewebers.ws>
Cc: Matthew Weber <matt@thewebers.ws>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change only moves things around and comments what is done in the
top-level Makefile file, in order to prepare the next changes.
Note that moving the definition of $(O) before or after re-entering make
does not change anything on the buildroot behavior.
This change also renames the variable UMASK to REQ_UMASK.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change uncorrolates the CONFIG_DIR and NEED_WRAPPER definition from
the presence of the O variable in the command line.
Now, the condition used to set these variables is the value of O itself.
This change is a preparatory work since the O definition will need to
be moved around when we will make Buildroot run with absolute canonical
paths for both its root directory and the output location.
This will be addressed in a follow-up patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, it is not possible for a br2-external tree to override a
defconfig bundled in Buildroot, nor is it possible to override one from
a previous br2-external tree in the stack.
However, it is interesting that a latter br2-external tree be able to
override a defconfig:
- the ones bundled in Buildroot are minimalist, and almost always
build a toolchain, so a br2-external tree may want to provide a
"better" defconfig (better, in the sense "suited for the project");
- similarly for a defconfig from a previous br2-external tree.
But we can't do that, as the rules for the defconfigs are generated in
the order the br2-external trees are specified, all after the bundled
defconfigs. Those rule are patten-matching rules, which means that the
first one to match is used, and the following ones are ignored.
Add a new utility macro, 'reverse', inspired from GMSL, that does what
it says: reverse a list of words.
Use that macro to reverse the list of br2-external trees, so that the
latters win over the formers, and even over bundled ones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we only support at most one br2-external tree. Being able
to use more than one br2-external tree can be very useful.
A use-case would be for having a br2-external to contain the basic
packages, basic board defconfigs and board files, provided by one team
responsible for the "board-bringup", while other teams consume that
br2-external as a base, and complements it each with their own set of
packages, defconfigs and extra board files.
Another use-case would be for third-parties to provide their own
Buildroot packaging in a br2-external tree, along-side the archives for
their stuff.
Finally, another use-case is to be able to add FLOSS packages in a
br2-external tree, and proprietary packages in another. This allows
to not touch the Buildroot tree at all, and still be able to get in
compliance by providing only that br2-external tree(s) that contains
FLOSS packages, leaving aside the br2-external tree(s) with the
proprietary bits.
What we do is to treat BR2_EXTERNAL as a colon-separated (space-
separated also work, and we use that internally) list of paths, on which
we iterate to construct:
- the list of all br2-external names, BR2_EXTERNAL_NAMES,
- the per-br2-external tree BR2_EXTERNAL_$(NAME) variables, which
point each to the actual location of the corresponding tree,
- the list of paths to all the external.mk files, BR2_EXTERNAL_MKS,
- the space-separated list of absolute paths to the external trees,
BR2_EXTERNAL_DIRS.
Once we have all those variables, we replace references to BR2_EXTERNAL
with either one of those.
This cascades into how we display the list of defconfigs, so that it is
easy to see what br2-external tree provides what defconfigs. As
suggested by Arnout, tweak the comment from "User-provided configs" to
"External configs", on the assumption that some br2-external trees could
be provided by vendors, so not necessarily user-provided. Ditto the menu
in Kconfig, changed from "User-provided options" to "External options".
Now, when more than one br2-external tree is used, each gets its own
sub-menu in the "User-provided options" menu. The sub-menu is labelled
with that br2-external tree's name and the sub-menu's first item is a
comment with the path to that br2-external tree.
If there's only one br2-external tree, then there is no sub-menu; there
is a single comment that contains the name and path to the br2-external
tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This unique NAME is used to construct a per br2-external tree variable,
BR2_EXTERNAL_$(NAME)_PATH, which contains the path to the br2-external
tree.
This variable is available both from Kconfig (set in the Kconfig
snippet) and from the .mk files.
Also, display the NAME and its path as a comment in the menuconfig.
This will ultimately allow us to support multiple br2-external trees at
once, with that NAME (and thus BR2_EXTERNAL_$(NAME)) uniquely defining
which br2-external tree is being used.
The obvious outcome is that BR2_EXTERNAL should now no longer be used to
refer to the files in the br2-external tree; that location is now known
from the BR2_EXTERNAL_$(NAME)_PATH variable instead. This means we no
longer need to expose, and must stop from from exposing BR2_EXTERNAL as
a Kconfig variable.
Finally, this also fixes a latent bug in the pkg-generic infra, where we
would so far always refer to BR2_EXTERNAL (even if not set) to filter
the names of packages (to decide whether they are a bootloader, a
toolchain or a simple package).
Note: since the variables in the Makefile and in Kconfig are named the
same, the one we computed early on in the Makefile will be overridden by
the one in .config when we have it. Thus, even though they are set to
the same raw value, the one from .config is quoted and, being included
later in the Makefile, will take precedence, so we just re-include the
generated Makefile fragment a third time before includeing the
br2-external's Makefiles. That's unfortunate, but there is no easy way
around that as we do want the two variables to be named the same in
Makefile and Kconfig (and we can't ask the user to un-quote that variable
himself either), hence this little dirty triple-inclusion trick.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we treat the case where we have no br2-external tree
(BR2_EXTERNAL is empty) differently from the case where we do have one
(BR2_EXTERNAL is not empty).
There is now no reason to treat those two cases differently:
- the kconfig snippet is always generated appropriately (i.e. it would
include the br2-external tree if set, or include nothing otherwise);
- we no longer have a dummy br-external tree either.
Also, the Makefile code to handle BR2_EXTERNAL is currently quite
readable if at least a little bit tricky.
However, when we're going to add support for using multiple br2-external
trees simultaneously, this code would need to get much, much more complex.
To keep the Makefile (rather) simple, offload all of the handling of
BR2_EXTERNAL to the recently added br2-external helper script.
However, because of Makefiles idiosyncracies, we can't use a rule to
generate that Makefile fragment.
Instead, we use $(shell ...) to call the helper script, and include the
fragment twice: once before the $(shell ...) so we can grab a previously
defined BR2_EXTERNAL value, a second time to use the one passed on the
command line, if any.
Furthermore, we can't error out (e.g. on non-existent br2-external tree)
directly from the fragment or we'd get that error on subsequent calls,
with no chance to override it even from command line.
Instead, we use a variable in which we store the error, set it to empty
before the second inclusion, so that only the one newly generated, if
any, is taken into account.
Since we know the script will always be called from Makefile context
first, we know validation will occur in Makefile context first. So we
can assume that, if there is an error, it will be detected in Makefile
context. Consequently, if the script is called to generate the kconfig
fragment, validation has already occured, and there should be no error.
So we change the error function to generate Makefile code, so that
errors are caught as explained above.
Lastly, when the value of BR2_EXTERNAL changes, we want to 'forget'
about the previous value of the BR2_EXTERNAL_MK variable, especially in
the case where BR2_EXTERNAL is now set to empty, so that we do not try
to include it later. That's why we first generate empty version of
BR2_EXTERNAL_MK, and then assign it the new value, if any.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we generate a kconfig snippet, we can conditionally include the
BR2_EXTERNAL's Config.in only when BR2_EXTERNAL is supplied by the user,
which means our empty/dummy Config.in is no needed.
As for external.mk, we can also include it only when BR2_EXTERNAL is
supplied by the user, which means our empty/dummy external.mk is no
longer needed.
Ditch both of those files, and:
- only generate actual content in the Kconfig snippet when we actually
do have a BR2_EXTERNAL provided by the user (i.e. BR2_EXTERNAL is not
empty);
- add a variable that contains the path to the external.mk provided by
the user, or empty if none, and include the path set in that variable
(make can 'include' nothing without any problem! ;-) )
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the inclusion of br2-external's Config.in to the generated kconfig
snippet.
This will ultimately allow us to use more than one br2-external tree.
Offload the "User-provided options" menu to the generated Kconfig
snippet. We can also move the definition of the Kconfig-version of
BR2_EXTERNAL into this snippet.
We introduce an extra check that was not present in the previous code,
to check that we do have permission on that directory. Prevciously, it
was handled as a side effect of not being able to cd into there, but it
is cleaner to check it expressly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_DEPRECATED logic is a lot less useful than the legacy handling,
because the symbols just disappears without warning to the user. For
example, we had a few defconfigs that were using deprecated symbols
(which were not actually used because BR2_DEPRECATED wasn't set) so
these didn't build the expected code anymore.
Also, the idea behind BR2_DEPRECATED is that you can easily revive it
again if there is interest. However, it is relatively easy to revert
the removal of a package as well.
The deprecation is also more effort because it has to be removed twice:
once when deprecating, and once when really removing.
It doesn't make sense to add a legacy entry for BR2_DEPRECATED. Users
who actually used it will get legacy warnings instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By aggregating all the license files into a single big text-only file
means we have no way to use license files that are binary blobs (e.g.
pdf, rtf...).
Just do not generate that big file; if the user still wants it, it is
very easy to create it afterwards.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We used to do a special handling of Linux kernel modules when stripping
target binaries because there's some special precious data in modules
that we must keep for them to properly operate. This is for example true
for stack unwinding data etc.
It turned out there're cases when our existing "strip --strip-unneeded"
doesn't work well. For example this removes .debug_frame section used by
Linux on ARC for stack unwinding, refer to [1] and [2] for more details.
Now Linux kernel may strip modules as a part of "modules_install" target
if INSTALL_MOD_STRIP=1 is passed in command line. And so we'll do
allowing kernel decide how to strip modules in the best way.
Still note as of today Linux kernel strips modules uniformly for all
arches with "strip" command, so this commit alone doesn't solve
mentioned problem but it opens a possibility to add later a patch to the
kernel which will strip modules for ARC differently - and that's our
plan for mainline kernel.
[1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/86
[2] http://lists.busybox.net/pipermail/buildroot/2016-September/172161.html
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the .config contains invalid configuration *(e.g. two providers for
a same virtual package), it is not possible to run "make distclean"
because the .config file is sourced and packages interpreted in this
case.
Add distclean to the noconfig list, so that we can run it in all cases.
However, this meand that DL_DIR is no longer set, and thus the default
download location never removed. We fix that by always removing the
download location, so that if it is the one configured we still remove
it (no change) and if it is not the one configured, we remove an
non-existing location and leave the user's location intact (no change
either).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the infrastructure for adding generated kconfig snippet in the
menuconfig.
For now, the kconfig snippet is generated empty, the recipe for filling
it in will be introduced in sub-sequent patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some of those directories will be needed even during configuration, like
BUILD_DIR, where we'll store the generated kconfig snippet.
So, move the rule to create them outside the BR2_HAVE_DOT_CONFIG block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fixup commit log, as noticed by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all configurators depend on generating the out-of-tree
Makefile wrapper.
In an upcoming patch, we'll need to also generate a kconfig fragment,
so it will have to kick in before we run the configurators.
Introduce a new intermediate "prepare-kconfig" rule, so we can
commonalise the dependencies of the configurators. Move the dependency
on the Makefile wrapper to that new intermediate rule.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mark prepare-kconfig as a phony target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The code for both cases is exactly the same, and only differs in the
location where defconfig files are looked for.
We use an intermediate macro to generate the corresponding rules,
because directly generating the rules is ugly and needs lots of escaping
and double-dollar-ing for the $(eval ...) and $(foreach ...) calls to
play nicely together.
Furthermore, that will be tremendously useful when we support multiple
br2-external trees.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: move comment outside of the make target, so that it isn't
displayed on stdout when loading a defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-utils.mk contains various definitions that are used in the package
infrastructures and packages themselves.
However, those definitions can be useful in other parts of Buildroot,
and are already used in a few places that are not related to the package
infrastructure. Also, $(sep) will be needed early in the Makefile when
we eventually support multiple br2-external trees.
Since this file only contains definitions, we can include it anytime.
So, consider that file to no longer be specific to the package infras:
- move it to support and rename it,
- move a few similar definitions from the main Makefile to that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
