Currently, we group packages that contribute less then 1%, into the
"Other" category.
However, in some cases, there can be a lot of very comparatively small
packages, and they may not exceed this limit, and so only the "Others"
category would be displayed, which is not nice.
Conversely, if there are a lot of packages, most of which only so
slightly exceeding this limit, then we get all of them in the graph,
which is not nice either.
Add a way for the developers to pass a different cut-off limit. As for
the dependency graph which has BR2_GRAPH_DEPS_OPTS, add the environment
variable BR2_GRAPH_SIZE_OPTS to carry those extra option (in preparation
for more to come, later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout:
- remove empty base class definition from Config;
- use parser.error instead of ValueError for invalid argument.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When no filesystem is enabled, the $BINARIES_DIR is not created. Yet,
the post-image scripts are still run. When those want to generate an
image in there, they may fail as the dirctory does not exist (it did
exist before we started applying preparatory changes for top-level
parallel build, so scripts got to rely on that assumption).
Do in target-post-image as we do in the sdk rule: create the directory
before calling the scripts.
Signed-off-by: Brent Generous <bgenerous@impinj.com>
[yann.morin.1998@free.fr:
- create the directory before calling the scripts
- don't drop the creation in the sdk rule
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This rule was added back in 9429e7b698 (core: introduce an intermediate
rule before the configurators) when the kconfig-side br2-external file
was generated separately from the Makefile-side one.
Now that they are generated together very early in the Makefile, we no
longer need this intermediate rule. Drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
[Peter: also drop outdated reference in the manual]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for multiple br2-external trees, we
introduced two files, one on the Makefile side, needed very early,
and one on the kconfig side, needed later in the configuration
process. We naturally introduced a two-step generation, as it looked
like the simplest and most obvious way.
But now, we are on the verge of generating more files on the kconfig
side, and it does not make sense to add even more steps to generate
them.
And even better yet, we can generate both the Makefile-side and
kconfig-side files at the same time, in fact.
Make it so.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that all the br2-external generated files are named after the same
pattern, it gets easier to remove them all using a glob.
Furthermore, we're on the verge of introducing more such generated
files, so removing them at one fell swoop will be simpler too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the two (all of them!) br2-external related files are generated
in the same location, it makes sense they are named after the same
pattern.
When initial support for (then single) br2-external trees was added back
in a4239f7fd1 (core: introduce the BR2_EXTERNAL variable), it was not
clear-cut why that file was not named with a br2 prefix.
So rename it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, that file is generated rather late in the configuration
process, so BUILD_DIR is known (and exists) by then.
We're soon to generate that file much earlier, at a point where
BUILD_DIR is not yet known, so we have two options:
1- declare BUILD_DIR earlier;
2- generate the file in an already-known location.
We go with the second solution, as we're already generating a
br2-external related file in BASE_DIR, so we can as well generate all
br2-external files in the same place.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We export GZIP = -n so that GZIP does not record original
name and timestamps. However..
GZIP environment variable is deprecated and soon will not be
supported in future GZIP versions. GZIP suggests the use of a
wrapper to pass options globally but it might be difficult to
implement in Buildroot. For now, we don't export the variable
and fix reproducibility issues per package as they show up in
Autobuilder.
Signed-off-by: Atharva Lele <itsatharva@gmail.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
show-dependency-tree was introduced in this release cycle, as a way to
quickly and easily provide the dependency tree to graph-depends.
show-dependency-tree is no longer used, now that graph-depends has been
switched over to using the more versatile show-info.
Beside, show-dependency-tree has never been part of a release.
Drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sometimes, it is need to quickly get the metadata of a subset of
packages, without resorting to a full-blown JSON query.
Introduce a new per-package (and per-filesystem) foo-show-info rule,
that otputs a per-entity valid JSON blob.
Note that calling it for multiple packages and.or filesystems at once
will not generate a valid JSON blob, as there would be no separator
between the JSON elements:
$ make {foo,bar}-show-info
{ "foo": { foo stuff } }
{ "bar": { bar stuff } }
However, jq is able to absorb this, with its slurping ability, which
generates an array (ellipsed and manualy reformated for readability):
$ make {foo,bar}-show-info |jq -s . -
[
{ "foo": { foo stuff } },
{ "bar": { bar stuff } }
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Users are increasingly trying to extract information about packages. For
example, they might need to get the list of URIs, or the dependencies of
a package.
Although we do have a bunch of rules to generate some of that, this is
done in ad-hoc way, with most of the output formats just ad-hoc, raw,
unformatted blurbs, mostly internal data dumped as-is.
Introduce a new rule, show-info, that provides a properly formatted
output of all the meta-information about packages: name, type, version,
licenses, dependencies...
We choose to use JSON as the output format, because it is pretty
versatile, has parsers in virtually all languages, has tools to parse
from the shell (jq). It also closely matches Python data structure,
which makes it easy to use with our own internal tools as well. Finally,
JSON being a key-value store, allows for easy expanding the output
without requiring existing consumers to be updated; new, unknown keys
are simply ignored by those (as long as they are true JSON parsers).
The complex part of this change was the conditional output of parts of
the data: virtual packages have no source, version, license or
downloads, unlike non-virtual packages. Same goes for filesystems. We
use a wrapper macro, show-info, that de-multiplexes unto either the
package-related- or filesystem-related macros, and for packages, we also
use a detailed macro for non-virtual packages.
It is non-trivial to properly output correct JSON blurbs, especially
when trying to output an array of objects, like so, where the last item
shall not be followed by a comma: [ { ... }, { ... } ]
So, we use a trick (as sugegsted by Arnout), to $(subst) any pair of
",}" or ", }" or ",]" or ", ]" with only the respective closing symbol,
"}" or "]".
The whole stuff is $(strip)ed to make it a somewhat-minified JSON blurb
that fits on a single line with all spaces squashed (but still with
spaces, as it is not possible to differentiate spaces between JSON
elements from spaces inside JSON strings).
Reported-by: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 15cb98769e (release: remove manual build files from release
tarballs) tried to remove the temporary files from the manual build from the
release tarball, but manual-clean only removes build/docs/manual and leaves
build/docs in the tarball.
Instead use 'make clean' to completely remove the build directory from the
tarball.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when we need to build the full dependency graph, we call make
to show the list of packages (make show-targets), and then call it again
and again iteratively while it returns new packages.
Since calling make will parse the whole set of our Makefiles, this takes
quite a bit of time (~4s each here), and the total can get pretty long.
However, make being make, already builds the whole dependency tree
information, so we can just ask for it.
Add a new top-level rule 'show-dependency-tree' that displays the whole
set of dependencies for all packages. For each package, its name, type
and version is displayed, then all the direct, first-level dependencies
are dumped. We choose a format that is not unlike the dot-graph format,
because it is both easy to read as a human, and easy to parse as a
machine:
foo: target 1.2.3
foo -> bar host-meh
bar: target virtual
bar -> buz
buz: target 2.3.4
buz ->
host-meh: host virtual
host-meh -> host-bleark
host-bleark: host 3.4.5
host-bleark ->
rootfs-meh: host
rootfs-meh -> host-bleark
To be noted: rootfs are currently reported as if they were 'host'
packages, to stay aligned with how graph-depends currently treats them.
Ideally, graph-depends could be enhanced to recognise them separately,
but that is another story.
For just plain defconfig, which is about the smallest config we can have
with an internal toolchain, we already have a seven-fold improvement
(with the graph-depends rule modified to not run the pdf generation, to
be able to just compare the tree generation):
$ time make graph-depends
real 0m27.344s
$ time make show-dependency-tree
real 0m3.848s
>From defconfig, C++, wchar, locales, ssp, and allyespackageconfig,
tweaked for even more packages (qt5 not qt4, luajit to avoid multi
providers, etc...), the timings are (graph-depends still modified to
not generate the pdf):
$ time make graph-depends
real 1m56.459s
$ time make show-dependency-tree
real 0m5.748s
There. I don't think those numbers need any explanation whatsoever;
they do speak on their own. OK, for maths sake, the ratio is about
twenty-fold. So, "yeah", I guess... ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Using 'make printvars' for printing all variables is not very useful.
E.g. all macros will output some bogus value. In addition, the same can
be achieved with 'make -p'.
We can simply remove the condition on $(VARS). If VARS is not set, the
filter expression will be empty which matches nothing, so nothing is
printed.
Note that the old behaviour can still be achieved with:
make printvars VARS=%
Update the 'make help' text to match the new behaviour.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 0db34529f4 we use rsync with the --keep-dirlinks option to
prevent overlays from accidentally overwriding /{usr,bin,sbin,lib} links
when BR2_ROOTFS_MERGED_USR option is enabled. Unfortunately this also
prevents replacing a symlink by a directory on purpose (e.g. /var/log,
to persist system logs).
Steps to reproduce:
- enable BR2_ROOTFS_MERGED_USR and BR2_PACKAGE_SKELETON_INIT_SYSV
- mkdir some_path/rootfs-overlay/var/log
- enable BR2_ROOTFS_OVERLAY="some_path/rootfs-overlay"
- run 'make'
- 'target/var/log' is still a symlink to '../tmp', not a directory
The --keep-dirlinks option can be dropped, since we run sanity checks
on overlays. Now the rsync invocation is identical to the SYSTEM_RSYNC
logic we have in system/system.mk, so use that variable.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a step to target-finalize that checks each rootfs overlay, following
the criteria established for custom skeletons and using the same script
uesd by skeleton-custom.mk.
Add a paragraph to the documentation clarifying that rootfs overlays
don't need to contain /bin, /lib or /sbin and must not contain them when
BR2_ROOTFS_MERGED_USR is enabled.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current transform changes any '.' at the start of a filename to
$(BR2_SDK_PREFIX). This also applies to the target of a symlink, when
it is relative.
We thus might end up with something like:
$(BR2_SDK_PREFIX)/bin/aarch64-linux-gnu-ar ->
$(BR2_SDK_PREFIX)./opt/ext-toolchain/bin/aarch64-linux-gnu-ar
when it should be:
$(BR2_SDK_PREFIX)/bin/aarch64-linux-gnu-ar ->
../opt/ext-toolchain/bin/aarch64-linux-gnu-ar
We fix that by making sure we always remove a known prefix, i.e. we
remove the path to host dir. The obvious solution would be to cd into
$(HOST_DIR)/.. , then tar ./host/ and finally use a --transfrom pattern
as 's,^\./$(notdir $(HOST_DIR)),$(BR2_SDK_PREFIX)'.
Since $(HOST_DIR) can point to a user-supplied location, we don't know
very well how the pattern may patch.
Instead, we cd into / and tar the full path to $(HOST_DIR).
Since tar removes any leading '/', it would spurr a warning message,
which is annoying. So we explicitly remove the leading '/' from
$(HOST_DIR) when we tar it.
Finally, we transform all filenames to replace a leading $(HOST_DIR)
(without a leading /) to the prefix to use.
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[yann.morin.1998@free.fr:
- use a single transform pattern
- use full HOST_DIR path as pattern to replace
- update commit log accordingly
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some package builds may fail when environment variables are present with the
same names as make variables in a package. This is a bigger problem for
environment variables with generic names, like 'PLATFORM' and 'OS'.
'PLATFORM' is for example a problem for host-acl.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ld-*.so and libpthread*.so* are not stripped in the same way as other
binaries because some applications need symbols in these libraries in
order to operate correctly.
However, the special handling for these binaries ignores the usual
BR2_STRIP_EXCLUDE_* rules so it is not possible to build an image which
has debugging symbols in these binaries.
Pull out the common find functionality so that we can build two find
commands that re-use the common exclusion rules.
Fix-suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For symmetry with the Kconfig-based packages offering comprehensive
targets like linux-update-defconfig, barebox-update-defconfig and so
on, add a new top level update-defconfig target to run savedefconfig.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a follow-up commit introducing per-package directory support, we
will need to define TARGET_DIR in a different way depending on the
value of a Config.in option. To make this possible, the definition of
TARGET_DIR should be moved inside the BR2_HAVE_DOT_CONFIG condition.
We have verified that $(TARGET_DIR) is only used within the
BR2_HAVE_DOT_CONFIG condition. Outside of this condition, such as in
the "clean" target, $(BASE_TARGET_DIR) is used.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, if a user runs "make" while specifying a specific package
(IE: make -p foo), the Makefile logic skips checking to see if all the
dependencies are selected in the specified packages config file. This behavior
is useful to test simple packages which do not have "complex" dependencies.
However; if a developer uses test-pkg -p ${package_name} to check their package,
the package may pass all the checks, but would have otherwise failed with a
simple "make" because the developer may have failed to add a select line in
packages config file, even if there is a new dependency in the packages
Makefile.
Pass the environment variable "BR_FORCE_CHECK_DEPENDENCIES" to the Makefile in
the test-pkg script, and check it's value in the Makefile. If the value is
"YES" force checking for dependency issues.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GitLab has severe limitations imposed to triggers.
Using a variable in a regexp is not allowed:
| only:
| - /-$CI_JOB_NAME$/
| - /-\$CI_JOB_NAME$/
| - /-%CI_JOB_NAME%$/
Using the key 'variables' always lead to an AND with 'refs', so:
| only:
| refs:
| - branches
| - tags
| variables:
| - $CI_JOB_NAME == $CI_COMMIT_REF_NAME
would make the push of a tag not to trigger all jobs anymore.
Inheritance is used only for the second level of keys, so:
|.runtime_test: &runtime_test
| only:
| - tags
|tests.package.test_python_txaio.TestPythonPy2Txaio:
| <<: *runtime_test
| only:
| - /-TestPythonPy2Txaio$/
would override the entire key 'only', making the push of a tag not to
trigger all jobs anymore.
So, in order to have a trigger per job and still allow the push of a tag
to trigger all jobs (all this in a follow up patch), the regexp for each
job must be hardcoded in the .gitlab-ci.yml and also the inherited
values for key 'only' must be repeated for every job.
This is not a big issue, .gitlab-ci.yml is already automatically
generated from a template and there will be no need to hand-editing it
when jobs are added or removed.
Since the logic to generate the yaml file from the template will become
more complex, move the commands from the main Makefile to a script.
Using Python or other advanced scripting language for that script would
be the most versatile solution, but that would bring another dependency
on the host machine, pyyaml if Python is used. So every developer that
needs to run 'make .gitlab-ci.yml' and also the docker image used in the
GitLab pipelines would need to have pyyaml pre-installed.
Instead of adding the mentioned dependency, keep using a bash script.
While moving the commands to the script:
- mimic the behavior of the previous make target and fail on any
command that fails, by using 'set -e';
- break the original lines in one command per line, making the diff for
any patch to be applied to this file to look nicer;
- keep the script as simple as possible, without functions, just a
script that executes from the top to bottom;
- do not perform validations on the input parameters, any command that
fails already makes the script to fail;
- do not add an usage message, the script is not intended to be called
directly.
This patch does not change functionality.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Thomas: make the script output on stdout rather than take the output
file name as second argument.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 7e9870ce32 ("core: introduce
intermediate BASE_TARGET_DIR variable"), the definition of
TARGET_DIR_WARNING_FILE was changed to use $(BASE_TARGET_DIR) instead
of $(TARGET_DIR).
However, this change is incompatible with per-package directories, and
is in fact not needed.
With per-package directories, using $(BASE_TARGET_DIR) means that
TARGET_DIR_WARNING_FILE is
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM. Due to this, when
skeleton-init-common or skeleton-custom attempt to install it, it
fails, because it should be installed to their package per-package
target directory, and not the global output/target directory that doesn't
exist yet. The failure looks like this:
/usr/bin/install -m 0644 support/misc/target-dir-warning.txt /home/thomas/projets/buildroot/output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
/usr/bin/install: cannot create regular file '/home/thomas/projets/buildroot/output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM': No such file or directory
make[1]: *** [package/pkg-generic.mk:336: /home/thomas/projets/buildroot/output/build/skeleton-init-common/.stamp_target_installed] Error 1
TARGET_DIR_WARNING_FILE is used in three places:
- In skeleton-custom.mk and skeleton-init-common.mk, where as
explained above, using $(TARGET_DIR) fixes the use of
$(TARGET_DIR_WARNING_FILE) in the context of per-package target
directories.
- In fs/common.mk, where it is used as argument to $(notdir ...) to
retrieve just the name of the warning file. So in this case, we
really don't care about the path of the file, just its name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a follow-up commit, we will make the .NOTPARALLEL statement
conditional on a Config.in option, so we need to move it further down.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the current code, the creation of the main output directories
(BUILD_DIR, STAGING_DIR, HOST_DIR, TARGET_DIR, etc.) is done by a
global "dirs" target. While this works fine in the current situation,
it doesn't work well in a context where per-package host and target
directories are used.
For example, with the current code and per-package host directories,
the output/staging symbolic link ends up being created as a link to
the per-package package sysroot directory of the first package being
built, instead of the global sysroot.
This commit reworks the creation of those directories by having the
package/pkg-generic.mk code ensure that the build directory, target
directory, host directory, staging directory and binaries directory
exist before they are needed.
Two new targets, host-finalize and staging-finalize are added in the
main Makefile to create the compatibility symlinks for host and
staging directories. They will be extended later with additional logic
for per-package directories.
Thanks to those changes, the global "dirs" target is entirely removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are going to move to per-package SDK, the location of CCACHE and
therefore the definitions of HOSTCC and HOSTCXX need to be evaluated
at the time of use and not at the time of assignment. Indeed, the
value of HOST_DIR changes from one package to the other.
Therefore, we need to change from := to =.
In addition, while doing A := $(something) $(A) is possible, doing A =
$(something) $(A) is not legal. So, instead of defining HOSTCC in
terms of the current HOSTCC variable, we re-use HOSTCC_NOCCACHE
instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we do a release, we know only of a set of gcc versions that the
host may have. But in the future, distributions with newer gcc versions
may show up.
Currently, we do not recognise those versions, and thus we do as if they
were older than the oldest we know of. This means that a set of packages
become unselectable, when they should be.
We fix that by capping the detected version to the highest we know of.
Reported-by: gargar_ on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To update the .gitlab-ci.yml file, we run run-tests -l to list all the
tests and post-process the output in a format suitable for
.gitlab-ci.yml. However, in a pipeline, it is the last command that
gives the return value. In addition, we have to redirect stderr of
run-tests -l because nose2 prints the tests on stderr, not stdout. Thus,
when run-tests -l fails, the update of .gitlab-ci.yml silently succeeds
but no tests are included in the .gitlab-ci.yml.
To fix this, set the pipefail option. This is bash-specific, but our
Makefile ascertains that we are running with bash as the shell (if bash
is available, but if it is not, dependencies.sh will error out). The
error message is still invisible, but at least make will fail.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This adds one column to the legal-info manifest table. It contains the
dependencies of the given package and their licenses. This information
is useful when assessing license compatibility of the packages and
their libraries.
An example of the content of the new column for the MPD package is
shown below:
"alsa-lib [LGPL-2.1+ (library), GPL-2.0+ (aserver)] boost
[BSL-1.0] libid3tag [GPL-2.0+] libmad [GPL-2.0+] libogg
[BSD-3-Clause] libvorbis [BSD-3-Clause] libzlib [Zlib]
skeleton-init-common [unknown] skeleton-init-sysv [unknown] sqlite
[Public domain] toolchain-external-linaro-arm [unknown]"
[Credits to Yann E. MORIN <yann.morin.1998@free.fr> for suggesting a
few simplifications.]
Signed-off-by: Michal Sojka <sojka@merica.cz>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The last parameter {HOST|TARGET} is now first. With this change,
adding new columns to the legal manifest file (as in the next commit)
will be slightly easier to review.
Signed-off-by: Michal Sojka <sojka@merica.cz>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc does not build when the srcdir path contains a '@', because that
path is then substitued in a texi file as argument to an @include
directive. But then, the '@' in the path will start a command evaluation
of its own, thus breaking the build. For example, with a $(O) path set
to /home/ymorin/dev/buildroot/O/to@ti :
perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/invoke.texi > gcc.pod
../../gcc/doc/invoke.texi:1678: unknown command `ti'
../../gcc/doc/invoke.texi:1678: @include: could not find /home/ymorin/dev/buildroot/O/to/build/host-gcc-initial-7.3.0/build/gcc/../../gcc/../libiberty/at-file.texi
[Peter: use findstring instead of subst/compare]
Reported-by: c32 on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables a riscv64 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This configuration has been used to successfully build a qemu-bootable
riscv-linux-4.15 kernel (https://github.com/riscv/riscv-linux.git).
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- simplify arch.mk.riscv by directly setting GCC_TARGET_ARCH
- simplify glibc.mk changes by using GLIBC_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GCC_TARGET_* configuration variables are copied to
corresponding GCC_TARGET_* variables which may then be optionally
modified or overwritten by architecture specific makefiles.
All makefiles must use the new GCC_TARGET_* variables instead
of the BR2_GCC_TARGET_* versions.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: simplify include of arch/arch.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The underlying problem is that $(foreach V,1 2 3,) does not evaluate to
an empty string. It evaluates to " ", three empty strings separated by
whitespace.
A construct of this format, with a giant list in the foreach, is part of
the printvars command. This means that "@:$(foreach ....)", which is
intended to expand to a null command, in fact expands to "@: "
with a great deal of whitespace. Make chooses to execute this command
with:
execve("/bin/sh", ["/bin/sh", "-c", ": "]
But with far more whitespace. So much that it can exceed shell command
line length limits.
This solution is to move the foreach to another step in the recipe. The
"@:" is retained as the first line so the recipe is not Empty, which
would cause a change in make behavior when make builds the target. The
2nd line, all whitespace, will be skipped by make.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the wording in the manual instructs the user to generate a
tarball from "the contents of the +output/host+ directory".
This is pretty confusing, because taken literally, this would amount to
running a command like:
tar cf my-sdk.tar -C output/host/ .
This creates a tarbomb [0], which is very bad practice, because when
extracted, it creates multiple files in the current directory.
What one really wants to do, is create a tarball of the host/ directory,
with something like:
tar cf my-sdk.tar -C output host/
However, this is not much better, because the top-most directory would
have a very common name, host/, which is pretty easy to get conflict
with when it gets extracted.
So, we fix that mess by giving the top-most directory a recognisable
name, based on the target tuple, which we also use as the name of the
archive (suffixed with the usual +.tar.gz+.) We offer the user the
possibility to override that default by specifying the +BR2_SDK_PREFIX+
variable on the command line.
Since this is an output file, we place it in the images/ directory.
As some users expressed a very strong feeling that they do not want to
generate a tarball at all, and that doing so would badly hurt their
workflows [1], we actually prepare the SDK as was previously done, but
under the new, intermediate rule 'prepare-sdk'. The existing 'sdk' rule
obviously depend on that before generating the tarball.
We choose to make the existing rule to generate the tarball, and
introduce a new rule to just prepare the SDK, rather than keep the
existing rule as-is and introduce a new one to generate the tarball,
because it makes sense to have the simplest rule do the correct thing,
leaving advanced, power users use the longest command. If someone
already had a wrapper that called 'sdk' and expected just the host
directory to be prepared, then this is not broken; it just takes a bit
longer (gzip is pretty fast).
Update the manual accordingly.
[0] https://en.wikipedia.org/wiki/Tar_(computing)#Tarbomb
[1] http://lists.busybox.net/pipermail/buildroot/2018-June/thread.html#223377
and some messages in the ensuing thread...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Stefan Becker <chemobejk@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: "Yann E. MORIN" <<a href="mailto:yann.morin.1998@free.fr" target="_blank">yann.morin.1998@free.fr</a>><br>
Reviewed-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: "Yann E. MORIN" <<a href="mailto:yann.morin.1998@free.fr" target="_blank">yann.morin.1998@free.fr</a>><br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The snippet of code that runs a check-package on all
.mk/.hash/Config.in files is currently only available within
.gitlab-ci.yml, and isn't immediately and easily usable by Buildroot
users. In order to simplify this, this commit introduces a top-level
"check-package" make target that implements the same logic. The
.gitlab-ci.yml file is changed to use "make check-package".
Since this target is oriented towards Buildroot developers, we
intentionally do not clutter the already noisy "make help" text with
this additional make target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The help text says that BR2_DEFCONFIG will be used as input, but a
BR2_DEFCONFIG specified in the existing .config file will *not* be
used. So say explicitly that it must be specified on the command line.
Note that both "BR2_DEFCONFIG=... make defconfig" and
"make defconfig BR2_DEFCONFIG=..." will work.
While we're at it, add a semicolon to separate the two statements.
Note that this overflows the help text beyond 80 characters, but that
is already the case in many other lines.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The systemd ConditionNeedsUpdate option is useful when offline updates
of the vendor operating system resources in /usr require updating of
/etc or /var on the next following boot.
Two examples of services making use of this option are
systemd-hwdb-update.service and systemd-sysusers.service.
ConditionNeedsUpdate=/etc will be true if the mtime of /etc/.updated
is older than the mtime of /usr. After services conditional on
ConditionNeedsUpdate have run, systemd-update-done.service will
synch the mtime of /usr to /etc/.updated so that the condition will
be false on subsequent boots.
For systems with writable /usr partitions where updates are done to
the running system, the update program will touch /usr as a final step.
But with Buildroot, where updates are often done by dumping a new
image onto the device, and where /usr is on a filesystem mounted
read-only, touching /usr as part of the update process is not practical.
Instead, it should be done a build time.
For testers, please note that systemd-update-done in v234 added a
regression where the mtime of /etc/.updated is set to the current time
instead of the mtime or /usr. This will be fixed in v239.
For more details, see:
http://0pointer.de/public/systemd-man/systemd.unit.htmlhttp://0pointer.de/public/systemd-man/systemd-update-done.service.html
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For reproducible builds, SOURCE_DATE_EPOCH will be set to the git commit
date if it is not defined in the environment, but this was done by
explicitly using $(TOPDIR)/.git as the git repository, which would not
give the expected result if Buildroot had been put into a subdirectory
of another repository.
This commit removes that restriction, meaning that the default date will
now be the date of the git commit that contains Makefile, regardless of
what level above Makefile the repository is at. This works because the
current directory when the 'git log' command is executed will always be
the directory containing Makefile (it must be, since TOPDIR is set from
CURDIR).
In general this should be a sensible default, and in cases where a
different date is required SOURCE_DATE_EPOCH can be defined in the
environment before invoking make.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If SOURCE_DATE_EPOCH is not defined it was given a definition that
caused 'git log' to be executed each time the variable is referenced,
which is not very efficient given that the answer cannot change.
This commit moves the definition of BR2_VERSION_GIT_EPOCH after the
inclusion of Makefile.in (so that GIT is defined) and makes it a
simply expanded variable so that it is only evaluated once.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the support for <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends which respectively show the list of all
dependencies or reverse dependencies for a given package. The existing
show-depends and show-rdepends only show the first-level dependencies,
while show-recursive-depends and show-recursive-rdepends show
recursively the dependencies.
It is worth mentioning that while show-recursive-depends really shows
all dependencies, show-recursive-rdepends is a bit limited because the
reverse dependencies of host packages are not properly accounted
for. But that's a limitation that already exists in show-rdepends, and
that cannot easily be solved.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- split from the patch that was also changing graph-depends
- rename show-rrdepends to show-recursive-rdepends
- add show-recursive-depends
- don't create GRAPHS_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was present in Yann's original patch, but got dropped when I rebased
commit 7e9870ce32 (core: introduce intermediate BASE_TARGET_DIR variable) to
fix the Makefile conflicts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each of the intermediate, per-rootfs target directories, as well as the
intermediate tarball, can take quite some place, and is mostly a
duplication of what's already in target/. The only delta, if any, would
be the tweaks made by the filesystem image generations, but those tweaks
are most probably only meaningful when seen as root.
We normally do not remove intermediate files, but those can be quite
large, and are not directly usable by, nor accessible to the user.
So, get rid of them once the filesystem has been generated.
This does not need to be done in fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... which for now still points to the base target directory, but this is
a step forward.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like we do for packages with the PKG variable, set ROOTFS to contain the
upper-case name of the rootfs currently being generated.
This will be useful in later patches, when we need more per-rootfs
variables, like a per-rootfs TARGET_DIR for example.
In Makefiles, per-rule variables trickle down the dependency chain, to
all dependencies of that rule, so we have to stop ROOTFS as soon as
we're not in a rootfs. This means we have to stop it at target-finalize
(which is a dependency of all filesystems), and for each package
individually, since some packages (host or target) can be direct
dependencies of filesystems as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new BASE_TARGET_DIR variable is set in stone to point to the real
location where packages will be installed. Its name is modelled after
its definition: it is located in $(BASE_DIR), and it is named 'target/',
hence BASE_TARGET_DIR.
The already-existing TARGET_DIR variable now simply points to the same
location, except that it is recursively expanded, so that we can later
change it depending on the context.
All locations that really need to reference the existing target/
directory, are changed to use BASE_TARGET_DIR; surprinsigly enough, they
all seem to be located in the main Makefile. :-) The rest is left with
using good-old TARGET_DIR.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If BR2_HOST_DIR is not the default, it can be difficult to find the
host directory (i.e., HOST_DIR always has to be passed explicitly in
addition to the output directory). For example, the Eclipse plugin
assumes that HOST_DIR=BASE_DIR/host.
Create a symlink from $(BASE_DIR)/host to $(HOST_DIR) if it is not the
default. Also remove it in the clean target.
When BR2_HOST_DIR is the default, HOST_DIR_SYMLINK will be empty so
there will be no additional dependency to dirs and nothing to remove
in clean.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10151
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
HOST_DIR is defined twice: once to its default value before .config is
included, and once more to BR2_HOST_DIR after .config is included.
However, the rule that defines the mkdir for HOST_DIR comes between
these two, so it will always use the default definition. Therefore,
if a non-default BR2_HOST_DIR is used, there will be no rule to create
that directory, while the dirs target depends on it.
This happens to work at the moment, because in the dirs target,
$(STAGING_DIR) comes before $(HOST_DIR), so $(HOST_DIR) will be created
implicitly. However, this will fail in top-level parallel builds where
both will be created in parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After commit 6729050f3a nothing creates
$(HOST_DIR)/share/buildroot anymore, causing sdk to fail with:
/bin/bash: .../output/host/share/buildroot/sdk-location: No such file or directory
Add creation of that directory to the "sdk" build steps itself.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that DEPENDENCIES_HOST_PREREQ is no longer used anywhere, we can
kill it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit moves the host-fakedate dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper regular dependency handled by the
package infrastructure.
host-fakedate is added as dependency to all packages, except
host-skeleton, because we depend on it.
In addition, we make sure that host-fakedate does not grow a
dependency on host-{tar,xz,lzip,ccache} to avoid circular
dependencies. host-fakedate does not need any extraction tool and does
not need to build C/C++ code (the source code is just a shell script
available in Buildroot).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the per-package SDK work, we want to avoid having logic
that installs files to the global HOST_DIR, and instead do it inside
packages. One thing that gets installed to the global HOST_DIR is the
minimal "skeleton" that we create in host:
- the "usr" symbolic link for backward compatibility
- the "lib" directory, and its lib64 or lib32 symbolic links
This commit moves this logic to a new host-skeleton package, and makes
all packages (except itself) depend on it.
While at it, use $(Q) instead of @ in the HOST_SKELETON_INSTALL_CMDS.
[Peter: drop host-patchelf reference in commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages really want to use an UTF-8 locale, or they break.
However, there is no guarantee that any given locale is available on a
system. For example,, while most mainstream distros (Debian and
derivatives, Fedora...) do have the generic, language-agnostic C.UTF-8
locale, Gentoo does not provide it.
So, find the first UTF-8 locale available on the system, and take any
that is available. We however do favour using the user-set current
locale, then using the language-agnostic C.UTF-8, and eventually any
random UTF-8 locale.
Note: we only need to enforce LC_ALL, because setting it implies
everything else:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
"""
1. If the LC_ALL environment variable is defined and is not null,
the value of LC_ALL shall be used.
"""
[Peter: use same regexp as in dependencies.sh]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is recommended that vendor trees store OS release information
in /usr/lib/os-release and that /etc/os-release should be a relative
symlink to /usr/lib/os-release.
For more details, see:
http://0pointer.de/public/systemd-man/os-release.html
[Peter: don't hide command, simplify ln invocation]
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This feature is not used by anyone in the core developpers and makes a
drastic simplification of the pkg-download infrastructure harder.
The future patch will move much of what's in the current pkg-download.mk
file into the dl-wrapper which is a shell script.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
