Fixes the following security issues:
CVE-2018-10536: An issue was discovered in WavPack 5.1.0 and earlier. The
WAV parser component contains a vulnerability that allows writing to memory
because ParseRiffHeaderConfig in riff.c does not reject multiple format
chunks.
CVE-2018-10537: An issue was discovered in WavPack 5.1.0 and earlier. The
W64 parser component contains a vulnerability that allows writing to memory
because ParseWave64HeaderConfig in wave64.c does not reject multiple format
chunks.
CVE-2018-10538: An issue was discovered in WavPack 5.1.0 and earlier for WAV
input. Out-of-bounds writes can occur because ParseRiffHeaderConfig in
riff.c does not validate the sizes of unknown chunks before attempting
memory allocation, related to a lack of integer-overflow protection within a
bytes_to_copy calculation and subsequent malloc call, leading to
insufficient memory allocation.
CVE-2018-10539: An issue was discovered in WavPack 5.1.0 and earlier for
DSDiff input. Out-of-bounds writes can occur because
ParseDsdiffHeaderConfig in dsdiff.c does not validate the sizes of unknown
chunks before attempting memory allocation, related to a lack of
integer-overflow protection within a bytes_to_copy calculation and
subsequent malloc call, leading to insufficient memory allocation.
CVE-2018-10540: An issue was discovered in WavPack 5.1.0 and earlier for W64
input. Out-of-bounds writes can occur because ParseWave64HeaderConfig in
wave64.c does not validate the sizes of unknown chunks before attempting
memory allocation, related to a lack of integer-overflow protection within a
bytes_to_copy calculation and subsequent malloc call, leading to
insufficient memory allocation.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_LTRACE option has some architecture dependencies, but
those architecture dependencies are not taken into account for the
Config.in comment.
To fix this, this commit introduces a BR2_PACKAGE_LTRACE_ARCH_SUPPORTS
hidden boolean that gets used by both the BR2_PACKAGE_LTRACE option
and the Config.in comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit dfaa18af00 ("ltrace: disable
on mips/mipsel"), ltrace was disabled on mips/mipsel due to build
issues, and a comment was added in the Config.in file to explain that
even though ltrace has mips/mipsel support, it isn't enabled because
it doesn't build.
Then, in commit d23cce19c2 ("ltrace:
enable for mips/mipsel"), the build of ltrace on mips/mipsel was
re-enabled, because it has been fixed upstream.
However, the comment in the Config.in comment was not removed in this
commit. Due to this, we have a comment that says "we don't allow
enabling ltrace on mips/mipsel" and the line right below precisely
allows to enable ltrace on mips/mipsel.
Fix this inconsistency by removing the no longer valid comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Nothing fancy, just a plain Cortex-M, armv7-M core...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6e223241e1 ("Add Transmission
package"), which added the transmission package, introduced a
BR2_PACKAGE_TRANSMISSION_REMOTE Config.in option, supposedly matching
the --enable-remote/--disable-remote transmission option.
However, transmission as of version 2.33 packaged by this initial
commit, did not have a --enable-remote/--disable-remote option, and it
was apparently never part of transmission.
Therefore, this commit removes this useless option. Since the
transmission-remote tool is automatically built when the daemon is
enabled, the Config.in.legacy handling selects
BR2_PACKAGE_TRANSMISSION_DAEMON.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0006-libsystemd.patch backports an upstream commit which renames
the systemd configure option.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use CONFIG variable to disable optimizations when or1k and gcc < 6 are
detected otherwise set CONFIG to release or debug depending on
BR2_ENABLE_DEBUG
Fixes:
- http://autobuild.buildroot.net/results/523e58eefba7ef23a09ef53160da22190ccbb098
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extract from release announcement:
- (2.9, 2.7, 2.1) Fixed an issue in the X.509 module which could lead
to a buffer overread during certificate validation. Additionally, the
issue could also lead to unnecessary callback checks being made or to
some validation checks to be omitted. The overread could be triggered
remotely, while the other issues would require a non DER-compliant
certificate to be correctly signed by a trusted CA, or a trusted CA with
a non DER-compliant certificate. Found by luocm. Fixes#825.
- (2.9, 2.7, 2.1) Fixed the buffer length assertion in the
ssl_parse_certificate_request() function which could lead to an
arbitrary overread of the message buffer. The overreads could be caused
by receiving a malformed algorithms section which was too short. In
builds with debug output, this overread data was output with the debug
data.
- (2.9, 2.7, 2.1) Fixed a client-side bug in the validation of the
server's ciphersuite choice which could potentially lead to the client
accepting a ciphersuite it didn't offer or a ciphersuite that could not
be used with the TLS or DTLS version chosen by the server. This could
lead to corruption of internal data structures for some configurations.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update several of the licenses annotated in the gst1-plugins-bad.mk file.
1. Specify GPL-2.0 in license info.
* All of the *.[ch] that specify GPL also specify version 2 or later.
2. Remove GPL from audiovisualizers.
* Changlog notes move from GPL to LGPL. (2015-04-25)
* docs/plugins/inspect/plugin-audiovisualizers.xml claims "LGPL".
* All *.[ch] files under ./gst/audiovisualizers say "GNU Library General Public License".
3. Add GPL to yadif.
* Changelog notes that yadif is "GPL". (2013-02-07)
* docs/plugins/inspect/plugin-yadif.xml claims "GPL".
* All *.[ch] files under ./gst/yadif say "GNU General Public License" except for one "GNU Library General Public License".
4. Remove UNKNOWN from fdk_aac.
* docs/plugins/inspect/plugin-fdkaac.xml claims "LGPL".
* All *.[ch] files under ./ext/fdkaac say "GNU Lesser" or "GNU Library General Public License".
5. Add BSD-2c to dtls.
* docs/plugins/inspect/plugin-dtls.xml claims "BSD".
* All *.[ch] files under ./gst/dtls have BSD-2c text.
6. Add BSD-2c to openh264.
* Changelog notes that openh264 is "BSD-2". (2014-10-03)
* docs/plugins/inspect/plugin-openh264.xml claims "BSD".
* All *.[ch] files under ./ext/openh264 have BSD-2c text.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patch, fixes [1]:
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp: In member function 'void QtWaylandClient::QWaylandXCompositeEGLWindow::createEglSurface()':
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:124:82: error: invalid conversion from 'Window {aka long unsigned int}' to 'EGLNativeWindowType {aka void*}' [-fpermissive]
m_surface = eglCreateWindowSurface(m_glxIntegration->eglDisplay(), m_config, m_xWindow,0);
^~~~~~~~~
In file included from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglclientbufferintegration.h:57:0,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.h:46,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:40:
.../host/arm-buildroot-linux-musleabihf/sysroot/usr/include/EGL/egl.h:265:31: note: initializing argument 3 of 'void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)'
EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
[1] http://autobuild.buildroot.net/results/9bcc76ed9e23c0d525f20b4da7f3bb5efe3083d4
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The gdb configure script is given --enable-gdbserver when
BR2_PACKAGE_GDB_SERVER is set, but it is not given --disable-gdbserver
when BR2_PACKAGE_GDB_SERVER is unset.
gdb gdb/configure.ac defaults to enabling gdbserver in "native"
(host=target) cases, which is always the case when buildroot builds a
gdb which runs on the target hardware. The gdbserver will overwrite
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY gdbserver, if any.
Fix that by passing --disable-gdbserver when BR2_PACKAGE_GDB_SERVER is
unset.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux-nfs project switched to a new homepage. Update the help text
link.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
faketime currently doesn't build on host machines that use gcc 8.x due
to stricter checks done by gcc, and the fact that it is built with
-Werror.
As a simple stop-gap measure, this commit patches the faketime
Makefile to not use -Werror anymore.
The actual fixes for the gcc 8.x issues have been submitted upstream
at https://github.com/wolfcw/libfaketime/pull/161, but disabling
-Werror is a much smaller fix.
Also, it is worth mentioning that removing -Werror makes the existing
patch 0001-Disable-the-non-null-compare-warning-error.patch (which was
just disabling one specific warning). We nonetheless keep this patch
around as it is a backport from upstream.
Fixes:
http://autobuild.buildroot.net/results/bd223dfa1c4baa68e427d4941bd2e9917e22da84/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch.
This release fixes the security issues listed below.
CVE-2018-1000300: curl might overflow a heap based memory buffer when
closing down an FTP connection with very long server command replies.
https://curl.haxx.se/docs/adv_2018-82c2.html
CVE-2018-1000301: curl can be tricked into reading data beyond the end
of a heap based buffer used to store downloaded content.
https://curl.haxx.se/docs/adv_2018-b138.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use "i.MX8MQ" (in capital letters) for the SoC name for better
readability.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel used is from 4.16 version, so adjust the comment.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The existing patch 0001-Build-buildconfig-for-the-host.patch changes
the exim build system to use the host compiler to build the
"buildconfig" program instead of the cross-compiler.
However, it still uses $(LIBS) which lists the target libraries to
link with, which shouldn't be used. Since buildconfig doesn't use any
library beyond the C library, we can simply drop using $(LIBS).
This will fix build failures of exim on Fedora 28, where libnsl is no
longer provided by the C library, causing build failures such as:
/usr/bin/gcc buildconfig.c
/usr/bin/ld: cannot find -lnsl
Fixes:
http://autobuild.buildroot.net/results/ac78fe18657558b3c12c03c08bf1081d7c06ca85/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kconfig uses either pkg-config or hard-coded /usr/include paths to find
the ncurses or ncursesw library. If ncursesw is found, it will include
<ncursesw.h>. Since Buildroot's host-ncurses doesn't install a .pc file,
and linux.mk anyway doesn't pass the pkg-config options to find the host
pkg-config files, Kconfig will always find the system's ncursesw.h.
However, since commit dde090c299 (linux: fix passing of host CFLAGS and
LDFLAGS) HOST_LDFLAGS is passed to the linux build system. Thus, if
host-ncurses was already built before 'make linux-menuconfig' is called,
the build will pick up libncurses from the host directory, which is NOT
widechar. Thus, two different ncurses configurations are mixed into the
final mconf program. This will result in serious breakage in the
rendering of the menus (lots of @ and question mark characters).
As a workaround (suggested by Yann), don't pass HOST_CFLAGS and
HOST_LDFLAGS when running kconfig commands. For kconfig, we should never
need host packages anyway. This way, the kconfig calls will always use
the system's ncurses and never our host-ncurses.
Note that the same problem could pop up for other kconfig packages as
well if we ever pass HOST_CFLAGS/HOST_LDFLAGS to them. We could force
HOSTCC=$(HOSTCC) directly in kconfig-package. However, for now there
are no other packages that exhibit this problem, so this can be
revisited when they do.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: David De Grave <david.degrave@essensium.com>
Cc: Scott Fan <fancp2007@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
5.0.2 is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
5.0.2 is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use "GST1_PLUGINS_BAD_LICENSE := $(GST1_PLUGINS_BAD_LICENSE), xxxx" construct
so that the list of licenses is presented as a comma-separated list.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When json-c is enabled but libcurl is disabled, clamav tries to build
the clamsubmit program, which fails with:
CC clamsubmit.o
clamsubmit.c:6:23: fatal error: curl/curl.h: No such file or directory
#include <curl/curl.h>
This is due to an incorrect curl-config detection logic, leading to
/bin/curl-config being present making the configure script believe
that curl is available, even when --without-libcurl is explicitly
passed.
This commit adds a patch, submitted upstream, which fixes this
problem.
Fixes:
http://autobuild.buildroot.net/results/c43d2ebd8ab30016969d642dbd71c297dc5f6bab/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ClamAV is using Git upstream
(https://github.com/Cisco-Talos/clamav-devel), so it makes sense to
use Git-formatted patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
