- depend and link against libexecinfo if enabled to fix linking failure
in case execinfo.h is detected for qlogging:
qt5base-5.15.2/src/corelib/global/qlogging.cpp:110 - __has_include(<execinfo.h>)
- libexecinfo already depends on !BR2_TOOLCHAIN_USES_GLIBC
- rename plain QT5BASE_CONFIGURE_ARCH_CONFIG to QT5BASE_CONFIGURE_ARCH_CONFIG_LIBATOMIC
Fixes:
- http://autobuild.buildroot.net/results/e7c685744b1f1bebb7fec9835bda534a72b7b7c2
.../riscv64-buildroot-linux-musl/bin/ld: .../build/qt5base-5.15.2/src/corelib/global/qlogging.cpp:1398: undefined reference to `backtrace_symbols'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some older versions of linux, or custom versions (like forks for some
boards), fail to build with host-gcc 10+, because of redefined symbols:
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition
of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
Since this has been fixed in recent-ish versions, we can't use an
unconditionaly patch, so we must have a conditional patch. However, a
patch may not always apply to arbitrary Linux versions or forks.
Upstream just dropped that line altogether:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e33a814e772cdc36436c8c188d8c42d019fda639
So, we use a little sed-grep combo to do the exact same change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some older versions of U-Boot, or custom versions (like forks for some
boards), fail to build with host-gcc 10+, because of redefined symbols:
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition
of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
make[4]: *** [scripts/Makefile.host:106: scripts/dtc/dtc] E
Since this has been fixed in recent-ish versions, we can't use an
unconditionaly patch, so we must have a conditional patch. However, a
patch may not always apply to arbitrary U-Boot versions or forks.
Upstream just dropped that line altogether:
018921ee79
So, we use a little sed-grep combo to do the exact same change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To support building in the wireless regulatory database files (regulatory.db*)
into the kernel using the CONFIG_EXTRA_FIRMWARE option, we need to ensure that
the database files are installed before the Linux kernel is built.
The dependency is harmless if CONFIG_EXTRA_FIRMWARE isn't actually set.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- only depend on libx11-xlib or libexpoxy if actually enabled
- simplify qt5 dependency
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to the latest libcamera commit.
This incorporates fixes and improvements for Raspberry Pi which will be
needed to go along side the new libcamera-apps package.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updating the busybox configuration files by loading and saving it back.
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
All the python packages are inside an if BR2_PACKAGE_PYTHON3, so with the
removal of python2 support, the explicit python3 dependency is redundant.
Remove it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python3-regex no longer exists, so there's no need to keep in sync with
it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-python3-setuptools was removed, we should instead use plain
host-python-setuptools.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update hostapd to the latest release v2.10. Drop all the patches
as they have already been upstreamed. Remove from .mk file all
the HOSTAPD_IGNORE_CVES records since those CVEs will not be
reported against the new version.
README's copyright year was updated.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update wpa_supplicant to the latest release v2.10. Drop all the patches
as they have already been upstreamed. Remove from .mk file all the
WPA_SUPPLICANT_IGNORE_CVES records since those CVEs will not be
reported against the new version.
README's copyright year was updated.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch:
- adds support for Xilinx ZCU102 evaluation board
- ZCU102 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu102.html
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity, add DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch:
- bumps ATF to Xilinx v2.6: mainline v2.6 requires patch to build
- bumps U-Boot to Xilinx 2022.01: important drivers not in mainline
- bumps Linux to Xilinx 5.15: important drivers not in mainline
- deletes board/zynqmp/patches directory: patches already in mainline
- modifies board/zynqmp/genimage.cfg: U-Boot 2022.01 uses u-boot.itb format
- adds extlinux.conf to vfat bootfs
- modifies U-Boot to unified xilinx_zynqmp_virt_defconfig (supports all boards)
- adds support for SPL pm_cfg_obj.c loading to PMU firmware
- enables support for host machines without OpenSSL required by U-Boot and Linux
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BL i.MX8M Mini is a baseboard that includes the SoM SL i.MX8M Mini.
https://www.kontron.com/produkte/baseboard-bl-i.mx8m-mini/p158549
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: explicitly set BR2_cortex_a53=y]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the target bpftool build out of linux-tools so that it is
up to date.
This also fixes build issues due to differences between kernel
versions. The latest version should be fully backwards compatible.
The host bpftool is needed for enabling features such as the systemd
bpf-framework (to be added in a future patch).
Use the git download method to get the libbpf submodule.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add threads dependency to avoid the following build failure raised since
bump to version 2.0.4 in commit
27d08083ed:
configure: error: unable to find pthreads, currently this is required
Fixes:
- http://autobuild.buildroot.org/results/b6065efaa722f2da911c7cf150d446da621e8c71
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Two source files had their header updated to correctly state the licence
is GPL-2.0+, not GPL-2.0. There is no real licensing change to the
project in this bump.
Release 2.4.8
-Fix Ideapad thermal shutdown issue #328
Release 2.4.7
- Fix AC/DC power limit issue in some HP TigerLake systems
- Regression fix for RAPL MSR usage in xml config file
- Added Japer Lake and Alder Lake CPU models
- Debug scripts for log collection to upload
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Old project homepage was removed, so switch to github, already in use to
download the sources.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit add a simple test checking the reported distro name and
id are Buildroot (as reported by /etc/os-release).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: drop python2 variant]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Replicate the logic used to set _PYTHON_HOST_PLATFORM in configure.ac:
https://github.com/python/cpython/blob/v3.10.2/configure.ac#L441-L446
This should correctly set the sysconfig platform for cross builds:
https://github.com/python/cpython/blob/v3.10.2/Lib/sysconfig.py#L704-L706
Not setting this appears to cause distutils/setuptools to use the
wrong build directory names for c extensions, however this doesn't
seem to cause build or runtime errors as the installation paths still
appear to be correct for staging/target installs.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop conditonal python version handling now that python2 has been
removed.
Remove python3-setuptools and replace usage with python3 only
python-setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 5ac65831d5 (package/libiio: drop python2 support) combined
two LIBIIO_CONF_OPTS lines, but forgot the backslash at the end of the line.
Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop package which is not used by anyone and can't be built since drop
of host-python in commit 2743ce00ca
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that host-python2 is gone, it makes sense to unconditionally install the
symlinks for the host, similar to how it is done for the target.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that host-python2 is gone, the custom python3 variant can be dropped and
instead host support added to python-regex.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d9bf97cf16 (package/python-cryptography: drop host
variant) dropped the dependency on host-python3-pycparser, so it is now
unused. Drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
