U-Boot 2017.09 uses SPL, so bump to this version so that we can
have a single qt5 image that supports the different imx6 sabresd
boards: imx6q, imx6dl and imx6qp.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The QT5 rootfs requires more space, so adjust it a larger size.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that SPL is supported a single image can run on the different
variants of imx6 sabresd boards: imx6q, imx6dl and imx6qp.
So drop the 'quad' prefix from defconfig, directory and readme file
to make it generic.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to 2017.09 version and kernel to 4.13.3.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.
The default architecture is set to Power8 as this was the first fully
enabled LE machine.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.07 has switched to SPL boot, which allows the same binary to
boot on imx6dl, imx6q and imx6qp sabresd boards.
Switch to the SPL mechanism.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: board is from Sinovoip, not Lemaker, move board files,
Use kernel headers from kernel, explicitly use 4.13.3,
drop eth0 dhcp config, cleanup post-build args,
disable tar output format, use u-boot custom format,
add host-dosfstools/mtools for genimage, drop unused
host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 version and kernel to 4.13.3.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 and kernel to 4.12.12 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to 4.13 kernel and remove all the dts patches as they
are part of upstream now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
minnowboard_max-graphical_defconfig has the line "BR_TARGET_GRUB2=y",
but this currently has no effect because BR_TARGET_GRUB2 cannot be
selected without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by
default.
The minnowboard max defconfig was updated to fix this problem, but the
graphical variant was not updated alongside it.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The galileo_defconfig has the line "BR_TARGET_GRUB2=y", but this
currently has no effect because BR_TARGET_GRUB2 cannot be selected
without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by default.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kernel used so far for the galileo boards would not successfully
build with GCC versions greater than 5.
See: https://github.com/mdr78/Linux-x1000/pull/2
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ts4900 defconfig is upstream in Linux since v4.9:
a2f1145 ARM: dts: TS-4900: add basic device tree
Bump kernel version to v4.12 and use the upstreamed defconfig
imx_v6_v7.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The TS-7680 is an i.MX286 ARM ARM926EJ-S board with 10/100 Ethernet,
USB port, eMMC and CAN ports.
The TS-7680 uses a 3.14.28 Linux kernel provided by Technologic Systems:
https://github.com/embeddedarm/linux-3.14.28-imx28
U-Boot is not provided as the manufacturer recommends not to update the
built-in bootloader.
For more informations please see:
https://wiki.embeddedarm.com/wiki/TS-7680
Signed-off-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com>
[Thomas: use same headers as the kernel being built, update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need to select BR2_TOOLCHAIN_BUILDROOT_GLIBC, so just remove it.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
i.MX1/L boards require an old Linux kernel version to run, which is not
compatible with latest Buildroot needs.
Will fix:
https://gitlab.com/buildroot.org/buildroot/-/jobs/27873568
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: update .gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Toradex V2.7 SDK, U-Boot image has changed from u-boot.imx to
SPL + u-boot.img.
Also fix U-Boot build error with GCC6.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx7d-pico, which is a board based on NXP
i.MX7D processor.
For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc
Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
[Thomas:
- add upstream references for the Linux kernel patches
- fix typoes in readme.txt
- remove audio-related packages in defconfig
- regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unbreak failing defconfig.
Resulting kernel and rootfs booted on ci20 device.
While at it, drop the useless BR2_TARGET_UBOOT_VERSION variable, this
variable is a hidden variable, so it is useless to mention it in a
defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: drop BR2_TARGET_UBOOT_VERSION.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Probably not noticed before because dtc was already built or it was
installed on the host.
Fixes: https://gitlab.com/arnout/buildroot/-/jobs/28979369
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linux 4.1 kernel does not compile with gcc 6.x.
The compiler version is now fixed to 5.x until a new kernel is used.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 5ffafd2353 (grub2: bump up version), grub2 needs a
toolchain with WCHAR support. However, the defconfigs that use grub2
were not updated at the time.
Add BR2_TOOLCHAIN_BUILDROOT_WCHAR=y to minnowboard_max_defconfig.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Vincent Stehlé <vincent.stehle@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes '__multi3' issue when building the kernel.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.
This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.
Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
- Add Fabio to DEVELOPERS
- Rename linux config fragment to linux_qt5.fragment
- Add comment to linux_qt5.fragment why it is needed
- Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
- Reorder defconfig entries to they match imx6q-sabresd_defconfig
- Remove strace and host-uboot-tools, neither seems to be needed
- Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
- Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
- Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to 2017.07 and kernel to version 4.12.3.
As imx_v6_v7_defconfig in 4.12 selects CONFIG_CFG80211_WEXT=y,
remove the linux.fragment file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Rebase on top of mainline 2017.03 release
- Fix sparse image flashing issues
Here are the main Linux modifications:
- Add mma8451 driver support
- Fix possible TiWi spurious interrupts issue
- Fix Ethernet interrupt parent issue
- Add USB Type C TUSB320 controller support
- Add SOM2 i.MX6DL and i.MX6QP variants
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note, that since version 2017.07 the sunxi targets needs the Python
libfdt library on the host. Therefore, additionally select the U-Boot
config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop the version number from the linux configuration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have wordexp support in uClibc-ng and nodm is available, we can
use it for the graphical defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux kernel version to 4.12.1 and U-Boot to 2017.05.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the board specific patches which has been applied upstream.
[Peter: also drop now unused BR2_GLOBAL_PATCH_DIR]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Main difference is that the drm driver now supports the hdmi output.
The gxl variant device tree has been renamed in:
commit 7eea67101b9713ae438955e8899b3c4b078419f9
Author: Kevin Hilman <khilman@baylibre.com>
Date: Fri Jan 20 07:57:52 2017 -0800
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
Since the GXL family has S905X and S905D SoCs, we're keeping the SoC
name in the DTS filename for clarity. Rename this file accordingly to
be consistent with the rest of the GXL DTS files.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
So adjust the defconfig and boot script to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rather than bundle the overlay with us, directly fetch it from its
upstream location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently, specifying a custom Xtrensa core is done with two variables:
- the core name
- the directory containing the overlay tarball
However, the core name only serves to construct the tarball name, and is
not used whatsoever to configure any of the toolchain components
(binutils, gcc or gdb), except through the files that are overlayed in
their respective source trees.
This has two main drawbacks:
- the overlay file must be named after the core,
- the tarball can not be compressed.
Furthermore, it also makes it extremely complex to implement a download
of that tarball.
So, those two variables can be squeezed into a single variable, that is
the complete path of the overlay tarball.
Update the qemu-xtensa defconfig accordingly.
Note: we do not add a legacy entry for BR2_XTENSA_CORE_NAME, since it
was previously a blind option in the last release, and there's been no
release since we removed BR2_XTENSA_CUSTOM_NAME. So, we just update the
legacy comments for BR2_XTENSA_CUSTOM_NAME, since that's all the user
could have seen in any of our releases so far.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not needed to have an intermediate blind option, we can just
hide the prompt behind the same dependency as the non-blind symbol.
Update our qemu-xtensa defconfig acordingly (note: it was using
different values for both options, which is not possible; the blind
option was just set to the non-blind one in the .config).
Also remove an unneeded empty default for the BR2_XTENSA_OVERLAY_DIR
string option (strings are empty by default).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change deprecates the ext2/3/4 rootfs size in blocks symbol in
favor of one that mimic the fs-size argument behavior of mkfs (i.e.
size in a human readable format accepting k, m, g or t suffix or their
upper-case variants).
This change also updates the defconfigs that used to set
BR2_TARGET_ROOTFS_EXT2_BLOCKS symbol.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of the Atmel defconfigs to linux4sam_5.6 in commit
0f7b5d4a9f, the new U-Boot version uses
the Device Tree compiler, so we need to add BR2_TARGET_UBOOT_NEEDS_DTC
in order to build dtc before u-boot and avoid build failures.
Fixes:
>>> uboot linux4sam_5.6 Configuring
>>> uboot linux4sam_5.6 Building
[...]
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chakra Divi <chakra@openedev.com>
[Thomas: remove host-uboot-tools from defconfig, already pulled by
BR2_TARGET_UBOOT_BOOT_SCRIPT, remove trailing whitespace.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
_mmc on defconfig files in engicam need to drop and same follow on
other engicam defconfig files.
So, this patch rename engicam_imx6ul_isiot_mmc_defconfig to
engicam_imx6ul_isiot_defconfig which is missing in commit "board: Add
support for Engicam Is.IoT MX6UL SOM" (sha1:
0235bc6176)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam Is.IoT MX6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools/host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create board/engicam/icorem6 for i.CoreM6 supported files.
and update the readme.txt so-that it can list i.CoreM6 board
details.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS
board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A VFAT filesystem is described in the genimage configuration file, so
we need host-dosfstools and host-mtools enabled in the defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 DualLite/Solo board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6
variant boards, so this patch update the same along with
buildroot defconfig that reflect the common name.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of a custom post-build script, use the boot script generation
logic of the U-Boot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for a13_olinuxino board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- use full name in DEVELOPERS file
- remove parametrization of the post-build.sh script, just hardcode
the boot.cmd file used as input
- add missing dosfstools and mtools host packages in defconfig,
needed because a vfat partition is defined in the genimage.cfg
file
- minor tweaks to readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default bootargs have changed in U-Boot for this board. Build U-Boot
environment and add it to the SD card image to update bootargs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As the vendor folder friendlyarm is created, move board nanopi-neo
also under vendor folder.
Signed-off-by: Chakra Divi <chakra@openedev.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync
include/linux/compiler*.h with Linux 4.5-rc6) which was added during the
2016.03 cycle.
Fix the build by bumping u-boot to 2017.05.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The board has an ethernet interface, so enable DHCP for it.
The used flash chip uses 16K erase blocks, so use that for JFFS2:
mtdinfo -a
..
mtd5
Name: user
Type: nand
Eraseblock size: 16384 bytes, 16.0 KiB
Amount of eraseblocks: 1915 (31375360 bytes, 29.9 MiB)
Minimum input/output unit size: 512 bytes
Sub-page size: 256 bytes
OOB size: 16 bytes
Character device major/minor: 90:10
Bad blocks are allowed: true
Device is writable: true
While we're at it, add a readme explaining how to build and upload the build
to the board.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig, as the kernel doesn't contain commit cb984d101b (compiler-gcc:
integrate the various compiler-gcc[345].h files) which was added during the
4.2 cycle.
Fix the build by bumping the kernel to 4.11.5.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Zynq ZC706 defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq MicroZed defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZedBoard defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.
Instead use a custom linux config for the pc defconfigs. With this, we also
can get rid of the fragment file containing the delta fra the qemu config.
Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but
they weren't adjusted when this was updated to use linux-4.11 in 28d97609b2
(configs/qemu: bump to the latest kernel version), breaking the build.
Fix it by also moving them to linux-4.11.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Engicam i.CoreM6 Quad/Dual board
with below features:
- U-Boot 2017.05
- Linux 4.11
- Default packages from buildroot
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use kernel 4.11 for stm32f4 discovery board
(stm32f429i-disco and stm32f469i-disco).
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds basic support for orangepi-zero board.
Board support package includes the following components:
- mainline kernel v4.11
- mainline u-boot v2017.03
- extra kernel config options: spidev, spi nor flash, wifi
- dts patches to enable SPI NOR and spidev
More details about this board are available here:
- http://linux-sunxi.org/Orange_Pi_Zero
Note that at the moment networking is not supported right out of the box.
Ethernet submission to mainline kernel is a work in progress, see the
latest dwmac-sun8i branches at https://github.com/montjoie/linux
On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless
driver available at https://github.com/fifteenhex/xradio
Changes from v1:
* Send patch using proper subject
* Update xr819 kernel dts patch: add compatible property
[Peter: fix s/PC/Zero/ typo]
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.11.3 2.9.0 YES OK
arm_versatile 4.11.3 2.9.0 YES OK
arm_versatile_nommu 4.4.70 2.9.0 YES OK
arm_vexpress 4.11.3 2.9.0 YES OK
m68k_mcf5208 4.11.3 2.9.0 YES OK
m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK
microblazebe 4.11.3 2.9.0 YES OK
microblazeel 4.11.3 2.9.0 YES OK
mips32r2el_malta 4.11.3 2.9.0 YES OK
mips32r2_malta 4.11.3 2.9.0 YES OK
mips32r6el_malta 4.11.3 2.9.0 YES OK
mips32r6_malta 4.11.3 2.9.0 YES OK
mips64el_malta 4.11.3 2.9.0 YES OK
mips64_malta 4.11.3 2.9.0 YES OK
mips64r6el_malta 4.11.3 2.9.0 YES OK
mips64r6_malta 4.11.3 2.9.0 YES OK
nios2-10m50 4.11.3 2.9.0 NO OK
or1k 4.11.3 2.9.0 NO OK (5)
ppc_g3beige 4.11.3 2.9.0 YES OK
ppc_mpc8544ds 4.11.3 2.9.0 YES OK
ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3)
ppc64_pseries 4.11.3 2.9.0 YES OK
sh4 4.9.6 2.9.0 YES OK (4)
sh4eb 4.9.6 2.9.0 NO (1) OK (4)
sparc_ss10 4.11.3 2.9.0 YES OK
sparc64_sun4u 4.11.3 2.9.0 YES OK
sparc_sun4u 4.11.3 2.9.0 YES OK
x86 4.11.3 2.9.0 YES OK
x86_64 4.11.3 2.9.0 YES OK
xtensa_lx60 4.11.3 2.9.0 YES OK
xtensa_lx60_nommu 4.11.3 2.9.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change from using ext3 to ext4.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This bumps U-Boot to the current stable version (2017.05).
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to 2017.05 and kernel to 4.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump u-boot version to 2017.03 and kernel version to 4.11.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump u-boot version to 2017.03 and kernel version to 4.11.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump u-boot version to 2017.03 and kernel version to 4.11.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to Linux kernel version 4.4.41 from the TI SDK 03.03.00.04
(TI SDK release date: 29.03.2017)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is finally possible to boot LEGO MINDSTORMS EV3 from the mainline
Linux kernel. This patch updates the defconfg to use the mainline kernel
instead of the custom ev3dev kernel.
[Peter: lock kernel headers version]
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_TOOLCHAIN_BUILDROOT_INET_RPC has been removed in commit
98f7de8796, following the removal from
upstream uClibc-ng of the RPC support.
However, armadeus_apf9328_defconfig was selecting this option, causing a
build failure due to the selection of a legacy option. We simply remove
it as anyway defconfigs should not needlessly enable toolchain options.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762159
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Back when galileo_defconfig was added, an explicit binutils version was
used, because only binutils >= 2.25 had support for the
-momit-lock-prefix option, necessary to workaround a CPU issue.
Support for binutils 2.25 has now been removed from Buildroot, and
therefore the option no longer exists, causing a build failure. The
oldest binutils version that can be selected in Buildroot is binutils
2.26, which has support for -momit-lock-prefix. Therefore, we simply
remove the explicit binutils version selection.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762201
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As in upstream Linux zebu_hs_smp_defconfig was renamed to
haps_hs_smp_defconfig we update Linux kernel defconfig name
respectively.
Also it fixes build failure, pointed us by Arnout:
https://gitlab.com/buildroot.org/buildroot/builds/14419271
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for pc_x86_64_efi_defconfig. Indeed, the ext2 filesystem contains the
kernel (4MB), the wireless modules (4MB), all firmware for wireless
modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB)
which brings the total to 70MB.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762234
This commit is identical to 9c393ad2fd
from Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>, except it
is done for pc_x86_64_efi_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 4b2440b7dc ("beaglebone: add DT
for BeagleBone Green"), both beaglebone_defconfig and
beaglebone_qt5_defconfig were updated to add "am335x-bonegreen" to the
list of Device Tree files to be produced.
However, beaglebone_qt5_defconfig uses an older kernel version than
beaglebone_defconfig, in which am335x-bonegreen doesn't exist.
Therefore, revert the change on beaglebone_qt5_defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762182
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration builds a 64bit image for RaspberryPi 3.
The size of the ext4 filesystem has to be extended to fit the large amount
(~60MB) of kernel modules enabled in the defconfig.
[Peter: drop gcc version selection / glibc, explain ext4 size requirement]
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We so far were using a Cortex-A7 as the CPU for the rpi3, as this was
the closest we had available, in 32-bit mode, to the real CPU used in
the rpi3.
But now we can also use the Cortex-A53 in 32-bit mode, so we use that,
which makes for an optimised build (A53 has an improved instruction set,
as compared to the A7).
Also drop the DTB overlay option, it defaults to 'y'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is just too
small for at91sam9x5ek_mmc_dev_defconfig, which has a lot of extra
packages for development.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Only 65MB is used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for firefly_rk3288_demo_defconfig. Indeed, the ext2 filesystem contains
the mali blob (90MB) and Qt5 (14MB), totalling to 125MB.
This is a bit too small to fit comfortably on a 128M flash driver, so
increase the size to 250000K (245MB).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for pc_x86_64_bios_defconfig. Indeed, the ext2 filesystem contains the
kernel (4MB), the wireless modules (4MB), all firmware for wireless
modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB)
which brings the total to 70MB.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also use "BR2_TARGET_LINUX_CONFIG_FRAGMENT_FILES" instead of
"BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this patch we add a couple of of-the-tree patches for u-boot.
We have an update in hardware that changed the kick-start slave cores
procedure. So these patches introduce fixes to work with new axs103
version correctly.
They have been already accepted in upstream u-boot so we need to get rid
of them as soon as these updates will get available in buildroot.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update axs10x defconfigs with the following changes:
- rename "snps_axs101_defconfig" and "snps_axs103_defconfig" to
"snps_arc700_axs101_defconfig" and "snps_archs38_axs103_defconfig",
to reflect the ARC core being used
- bump linux kernel version to 4.10.8
- set up host linux headers to 4.10
- bump u-boot version to 2017.01
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update snps_archs38_zebu_defconfig the following:
- bump linux kernel version to 4.10.9
- set up host linux headers to 4.10
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the default xserver_xorg-server version 1.19.x, the AIGLX option
is no longer available (cfr. commit ec502ea8e4). In fact, AIGLX is
always enabled. So remove this option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have changed the default ext2/3/4 filesystem size from automatic
to 60MB, the minnowboard_max graphical demo config doesn't fit anymore.
So increase it to double.
The exact number doesn't matter much, it has to be somewhat smaller
than 128MiB, so let's take a round number of 120000K.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit c6bca8cef0, the
auto-calculation logic of the ext4 filesystem size was removed. The
default size of 60MB is too small for the beaglebone_qt5_defconfig,
should it should be increased.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update snps_archs38_vdk_defconfig with the
following:
- bump linux kernel version to 4.10.8
- set up host linux headers to 4.10
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[Thomas: drop post-image script copying the gdbinit file, and suggest
to use gdb -x option instead to point to the gdbinit file in board/.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following nommu kernel build issue:
arch/xtensa/kernel/setup.c: In function 'cpu_reset':
arch/xtensa/kernel/setup.c:553:2: error: implicit declaration of function
'local_flush_tlb_all' [-Werror=implicit-function-declaration]
local_flush_tlb_all();
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux configs are missing memmap= option that is required for xtfpga
boards configured w/o device tree starting with linux-4.9. Add it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of downloading a *different* version of the kernel for the
headers as for the headers itself, use the same one.
BR2_KERNEL_HEADERS_AS_KERNEL is the default, but we have to set the
custom version.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel headers version used to be default when the default was
still 4.9. Now, however, we switched the default headers version to
4.10 but the beagleboardx15 kernel is still 4.9, so we have to set
the kernel headers version explicitly.
Fixes https://gitlab.com/buildroot.org/buildroot/builds/11700987
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit:
- Adds a development rootfs defconfig for the at91sam9x5ek board for
NAND-based configurations.
- Adds SD-card based configurations for the at91sam9x5ek board, both a
minimal one and development one.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add at91sam9x5ek_mmc_defconfig to have all four combinations:
NAND minimal, NAND development, SD minimal, SD development.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This bump fix the build failure with gcc5 for barebox.
Some changes were made to the first patch to align to the latest
barebox api.
Also done the following changes:
- Use "BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES" instead of patching
the barebox sources.
- Use "BR2_GLOBAL_PATCH_DIR" instead of
"BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The board support package includes the following components:
- U-Boot 2016.11
- Linux 4.9.3
- packages:
- alsa-utils for basic audio usage of the on-board headphone jack
and microphone
- iw and wpa_supplicant for managing the wireless interface
Two Linux patches are necessary to enable audio and wifi support. Both
patches are fetched from the Linux next branch and are probably mainlined in
Linux 4.11.
A Linux configuration fragment enables the wireless device driver, which
is not enabled by default in the mainline defconfig of the board.
The wifi chip needs a NVRAM configuration file which is provided in the
rootfs overlay.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: remove e2fsprogs from the target packages, add entry in
DEVELOPERS file, remove C++ support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These defconfigs have been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. In addition, the rocketboards git
repository used by these defconfigs hasn't been reachable for more than
half a year. Finally, these defconfigs don't even use the
BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC option so they are not a
great example for this family of targets.
Remove these defconfigs, as well as the board directory. Both are
removed in a single commit to avoid having an inconsistent readme.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Jan Viktorin <viktorin@rehivetech.com>
Cc: Charles Manning <cdhmanning@gmail.com>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as it board
directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gergely Imreh <imrehg@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The scripts used for the minnowboards were generic for MinnowBoard and
MinnowBoard MAX. Since we removed the original MinnowBoard, this isn't
necessary anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as the files it
references. Update the readme to remove references to MinnowBoard.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to 2017.01 version and kernel to 4.9.13.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The imx6ul-liteboard dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And use same version for header headers as well.
[Peter: explicitly set BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10 as pointed
out by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
(quad A53), 8/16GB eMMC and 1/2GB RAM.
Both the s905 (gxbb) and s905x (gxl) variant is supported.
This defconfig uses mainline Linux. As the mainline support for s905 is
quite young, use the latest release candidate. There is currently no
support for this board in U-Boot or sources available for the vendor U-Boot,
so the defconfig doesn't build a u-boot and instead uses the existing U-Boot
available in the eMMC. This also means that we need to wrap the kernel as
uImage, which isn't suppported for aarch64. Instead this is done in the
post-build script.
Mainline aarch64 defconfig builds most drivers modular, so add mdev for
module autoloading.
[Peter: explicitly set BR2_cortex_a53=y]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- update to released kernel and U-Boot,
- move the headers config closer to the kernel ones,
- update readme.txt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.01 version and kernel to 4.9.9.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When this qemu nios2 defconfig has been added, the insternal toolchain
used for testing was build with Linux kernel headers 4.9, so
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9 was missing in the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this kernel rev has numerous bug fixes, framework upgrades and new
features added.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this version bump allows usage of hardkernel's secure signatures when
booting a system
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This updates Linux kernel for Synopsys ARC HS38 VDK so it matches real
platform and while at it bump kernel version to the latest.
Main changes:
* Linux kernel v4.9.6 (latest in 4.9.x series in buildroot)
* Add support of MMC controller which is used for rootfs
* Add support of UIO which is used to communicate with EVSS
Now with this update image built by vanilla Buildroot VDK has
working UART, MMC, LCD, Ethernet, UIO etc.
And while at it we rename defconfing so it:
1) Doesn't mention SMP any more - that's the only option anyways now
2) Matches common naming scheme: vendor_arch_platform
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Zakharov Vlad <Vladislav.Zakharov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel 4.9.7 has an important fix: a2104c7cd3b24c432 ("drm/atomic:
clear out fence when duplicating state"), which fixes a kernel
warning that triggers sometimes when starting/stopping ksmcube
application several times in a row.
So bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.9.6 2.6.0 YES OK (3)
arm_versatile 4.9.6 2.5.0 YES OK
arm_versatile_nommu 4.4.45 2.5.0 YES OK
arm_vexpress 4.9.6 2.5.0 YES OK
m68k_mcf5208 4.8.17 2.5.0 YES OK (6)
m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK
microblazebe 4.9.6 2.5.0 YES OK
microblazeel 4.9.6 2.5.0 YES OK
mips32r2el_malta 4.9.6 2.5.0 YES OK
mips32r2_malta 4.9.6 2.5.0 YES OK
mips32r6el_malta 4.9.6 2.6.0 YES OK (3)
mips32r6_malta 4.9.6 2.6.0 YES OK (3)
mips64el_malta 4.9.6 2.5.0 YES OK
mips64_malta 4.8.17 2.5.0 YES OK (6)
mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4)
mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4)
nios2-10m50 4.9.6 2.9.0 NO OK
or1k 4.9.6 2.5.0 NO OK
ppc_g3beige 4.9.6 2.5.0 YES OK
ppc_mpc8544ds 4.9.6 2.5.0 YES OK
ppc_virtex_ml507 4.9.6 2.5.0 NO OK
ppc64_pseries 4.9.6 2.5.0 YES OK
sh4 4.9.6 2.5.0 YES OK
sh4eb 4.9.6 2.5.0 NO (1) OK
sparc_ss10 4.9.6 2.5.0 YES OK
sparc64_sun4u 4.9.6 2.5.0 YES OK
sparc_sun4u 4.9.6 2.5.0 YES OK
x86 4.9.6 2.5.0 YES OK
x86_64 4.9.6 2.5.0 YES OK
xtensa_lx60 4.8.17 2.6.0 YES OK (6)
xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using
mainline U-Boot and mainline kernel.
Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and
kernel versions from NXP.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes:
* Buildroot defconfig
* Mainline Linux kernel v4.9.6
* Mainline U-Boot (current HEAD revision is used, as board support
patches are not in stable release yet)
* genimage config to create sdcard image
* Board readme.txt
[Peter: use http:// instead of git:// for u-boot]
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds yet another development platform for ARC.
This time around it is HAPS or ZeBU based prototyping platform used
widely for both ARC hardware and software bring-up and verification.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.9.6
- set up host linux headers to 4.9
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
You can bootup a OpenRISC system, networking is not working.
[Peter: drop unneeded _GETTY_PORT="ttyS0" setting]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Fix second Ethernet port for SoloX
- Fix LCD disable sequence
- Fix LVDS2 as primary display
Here are the main Linux modifications:
- Rebase on top of NXP 4.1.15_2.0.0 branch
- Fix touch screens interrupt conflicts
- Backport tw686x features from mainline
- Fix multiple ft5x06 touch instantiation
- Fix dirty cow vulnerability
- Various improvements to TC358743 driver
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to Linux kernel version 4.4.32 from the TI SDK 03.02.00.05
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches from 4.8 version don't apply. Update them by backporting
liteBoard support from Linux master branch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is already support in newest U-Boot version, so drop existing
U-Boot patches.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
[Peter: part 2, boot.scr / defconfig changed accidently got dropped]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel versio to 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use mainline 4.9 instead of a custom kernel based on NXP 4.1.
As mx7 boots in non-secure mode in mainline kernel, change the
U-Boot target to "warp7".
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which includes the gcc5+ fix for ftrace:
commit aeea3592a13bf12861943e44fc48f1f270941f8d
Author: Behan Webster <behanw@converseincode.com>
Date: Wed Sep 24 01:06:46 2014 +0100
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
With compilers which follow the C99 standard (like modern versions of gcc and
clang), "extern inline" does the wrong thing (emits code for an externally
linkable version of the inline function). In this case using static inline
and removing the NULL version of return_address in return_address.c does
the right thing.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Otherwise, the build dies with:
arch/arm/kernel/return_address.c:66:7: error: redefinition of ‘return_address’
void *return_address(unsigned int level)
^
In file included from include/linux/ftrace.h:20:0,
from arch/arm/kernel/return_address.c:12:
./arch/arm/include/asm/ftrace.h:48:21: note: previous definition of ‘return_address’ was here
extern inline void *return_address(unsigned int level)
^
For more details, see:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616889
notice: Only build tested as I don't have the hw, which is also why the
kernel is only bumped to 3.18 to make it as safe as possible.
CC: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig currently doesn't build:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616951
As u-boot needs dtc, so add that and change to kconfig mode like on our
other allwinner defconfigs as that is in fact what is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration provides a basic setup for using Buildroot
to create a sd-card image a BeagleBoard X15 board.
[Peter: use 512M ext4 partition, linux 4.9 and u-boot 2016.11]
Signed-off-by: Theo Debrouwere <Theo.Debrouwere@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline u-boot 2016.09.01
- mainline kernel 4.9
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename orangepipc files, configs, and directories:
- oragepipc_defconfig -> orangepi_pc_defconfig
- board/orangepi/orangepipc -> board/orangepi/orangepi-pc
The purpose of the patch is to improve readability before
adding other boards of orangepi family.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MX6 has a Cortex-A9 core, which supports NEON and VFP.
Add support for them.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The udoo neo files are currently placed inside udoo/neo directory.
Place the mx6qdl udoo related files inside udoo/mx6dl for consistency.
[Peter also update path in readme.txt]
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As console=ttymxc0 is passed in U-Boot we can use /dev/console to
access the serial console and then BR2_TARGET_GENERIC_GETTY_PORT
can be removed.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mx6sx udoo neo boards. For more information about these
boards, please check:
http://www.udoo.org/udoo-neo
The U-Boot and kernel dts patches will be removed when we bump U-Boot
to 2017.01 and kernel to 4.10 version as they have already been sent
upstream.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to kernel 4.9 and remove the wifi dts patch as it is already
part of 4.9.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the kernel to the next commit which fix the build with gcc6.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.11 brings commit 5f95e68daae397 ("clk: imx: fix integer overflow
in AV PLL round rate"), which fixes a PLL calculation bug, so bump to this
version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.8 brings commit 235bde1ed3f0ff ("net: fec: Call swap_buffer()
prior to IP header alignment"), which makes Ethernet functional again
on mx28.
Bump to this version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit changes the kernel version used by the
olimex_a20_olinuxino_lime_mali in order to use a version that builds
fine with gcc 5.x. This kernel repository is listed in
https://linux-sunxi.org/Linux#External_links as a possible replacement
for the aging 3.4 sunxi kernel.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously the vdk solution was using a Linaro kernel that doesn't
build with gcc 5.x.
Since there is no point in using Linaro anymore for this solution,
this patch makes the aarch64 vdk defconfig point to the 4.6 Linux
kernel.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we upgrade U-Boot version to 2016.11 in
"snps_axs101_defconfig" and "snps_axs103_defconfig".
Important fixes: new version fixes U-Boot build for arc700. Since
gcc-6.x "-marc700" option is no longer supported, "-mcpu=arc700"
should be used instead.
We haven't sent it before as we were waiting for U-Boot 2016.11
release.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas: as reported by Alexey, this commit is in fact a bug fix: it
makes the defconfig work properly. Indeed, since the ARC compiler has
moved to gcc 6.x, the ABI has changed, and a Linux 4.8+ kernel is
needed for userspace to work on ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a fragment with configs from retired linux-3.18.config.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select BR2_TARGET_ROOTFS_EXT4 so that an EXT4 rootfs can be generated.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig was mistakenly removed by commit
78ac39cb89 due to an improper conflict
detection in "git am". This commit restores it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sama5d4ek defconfig has been removed in commit
9cb0b37cbd267ec1c2beea3deeaa86846bc2d037, but the board/atmel/readme.txt
file was not updated accordingly. This commit fixes that.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Atmel sama5d4ek board is no longer sold. Since there is the Xplained
board and we won't maintain anymore the EK board, the defconfig can be
removed. In addition, the defconfig was failing to build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to linux4sam_5.5 and remove dtb variants which are no longer
supported. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The calao defconfigs no longer build with gcc 5.x, due to Linux kernel
versions used being too old. However, it is unlikely that anyone will
ever update them, since Calao Systems has gone bankrupt in April 2016.
Therefore, let's remove them. If anyone is interested again at some
point, it will be easy to revive them from the Git history.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch fixes build by GCC 5 (unsupported by the older U-Boot).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the kernel of release 4.1.15_2.0.0_ga, as it builds properly with
gcc 5.x, which is now the default.
We add a linux config fragment to disable the framebuffer, to repair the
build for imx_v6_v7_defconfig.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: adjust syntax in fragment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to have a better hierarchy for the genimage scripts used by
NXP mx25, mx51, mx53, mx6, mx7 SoCs, let's place them inside the
board/freescale/common/imx/ directory.
This helps in creating a more natural separation between the mxs scripts
that are placed inside the board/freescale/common/mxs/ directory.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original submitter and follow-up contributors to the qmx6
defconfig no longer have the hardware available or the time/interest
to update this defconfig, which currently fails to build with gcc
5.x. Due to this, this commit removes this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig no longer builds with gcc 5.x, and the original
submitter, Gustavo, no longer has the hardware to test this
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot KConfig allows to take care of CONFIG_OLD_SUNXI_KERNEL_COMPAT
in order to properly start the kernel (Error: unrecognized/unsupported machine ID)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has not been updated in any significant way since 2011,
when Peter moved it to use a mainline kernel. It's now using an
ancient 3.0 kernel, and a vendor-specific U-Boot version that fails to
build with various "undefined reference" errors:
undefined reference to `show_boot_progress'
undefined reference to `image_print_contents'
undefined reference to `wait_ms'
So it's time to get rid of the defconfig for this platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the common mxs genimage script instead of a custom one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration for the KwikByte KB9202 was added back in July 2008
(commit e27fef5183), and was never
updated since then. It still uses a 2.6.38 kernel, with the out of
tree patches from the former AT91 kernel maintainer. The board has
been discontinued according to its page at
http://www.kwikbyte.com/KB9202.html.
This defconfig no longer builds since the switch to gcc 5.x as the
default. Therefore, it's time to get rid of this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It turns out that linux-4.9-rc3 has all that is needed for the NanoPi
NEO, so use that rather than the franken-kernel I assembled.
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig is affected by bug #8516, reported more than a year ago,
and nobody has updated the defconfig since then. In addition, it should
be migrated to the genimage mechanism instead of having its own
mkcubieboard.sh script.
Therefore, let's get rid of this defconfig.
Fixes bug #8516.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump at91bootstrap to v3.8.7, U-Boot to linux4sam_5.5, Linux to
linux4sam_5.5 (based on v4.4.x).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump at91bootstrap to v3.8.7, U-Boot to linux4sam_5.5, Linux to linux4sam_5.5
(based on v4.4.x).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configs/mx6udoo_defconfig supports the quad and dual-lite variants,
so there is no need to keep udoo_quad_defconfig anymore.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
- quad-core Cortex-A7 @1.2GHz
- 256 or 512MiB of DDR
- uSDCard as only storage option
- 3x USB 2.0 host (one socket, two on expansion pin-holes)
- 1x USB 2.0 OTG (also used as power source)
- 10/100 etehrnet MAC
- GPIOs, SPI, I2c...
Support for the Nanopi NEO in U-Boot and Linux is very recent, so much
so that we have to use an -rc tag for U-Boot and a special Linux tree.
As for Linux, I pushed a git tree on Github with a single tag that
matches what is currently queued in the sunxi-next queued for 4.10,
based on 4.9-rc3. All those commits are from Maxime's tree, the
maintainer for most sunxi stuff.
This also means that we can't use the Linux headers from the kernel
being built (which is what we usually do) because those report 4.9,
while Buildroot currently knows only of 4.8 at best. So this is what we
use.
Unfortunately, support for the ethernet MAC and the USB OTG are not yet
upstream, but are being actively worked on.
The Nanopi NEO is very similar to the Orangepi PC, so I was able to
scanvenge most of its configuration. ;-)
Thanks Maxime for your help on IRC! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This uses the ev3dev linux extension to compile the ev3dev drivers for
LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a script to create SD card and flash images for LEGO MINDSTORMS
EV3 using the genimage tool.
The default kernel config had to be modified to add support for squashfs
and to add a ram disk.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds U-Boot configuration for LEGO MINDSTORMS EV3. U-Boot has
had support for LEGO MINDSTORMS EV3 since v2016.05.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the standard sdcard.img format that can be directly copied
to the SD card.
Remove the custom create-boot-sd.sh script and update the readme.txt
file accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: further tweaks to readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-Boot to 2016.09.01 and kernel to 4.8.4 version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the common board/freescale/common/post-image.sh script instead of
a custom one.
As the final image binary is called "sdcard.img" update the documentation
accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot configuration for Zynq boards have CONFIG_FIT_SIGNATURE=y,
so they need OpenSSL to be available on the host system. In order to
add OpenSSL to the build this commit adds the
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the relevant defconfigs.
Fixes#9316.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select ext4 as root file system as the genimage config expects ext4 not ext2.
Tested on beaglebone, beagleboneblack and AM335x EVM
[Peter: reworded slightly]
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 doesn't work out of the box because the
u-boot-nand.img support has been removed.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 does build successfully, but we don't have a
board anymore to test it.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel revision used by lego_ev3_defconfig to the latest tag from
ev3dev, as suggested by Peter. This is a 4.4 series kernel, which has the
added benefit of not necessitating a specific gcc to boot.
We need a patch to create an empty drivers/lego/Kconfig file for the build
to succeed though, as the ev3dev kernel normally expects a drivers tree to
be checked out there.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit
0924208839 ("configs/arm_juno: use 4.6
mainline kernel"), we're using a mainline kernel for the ARM Juno
board. But we're still fetching it from a Git repository, which is not
really efficient, so let's switch to use a tarball instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration allows out-of-the box Digilent Zybo
support. It uses mainline U-boot and Linux kernel.
This configuration generates a SD card image named sdcard.img.
[Peter: rename genimage.cfg, cleanup post-image script, enable VFP support,
use 4.6 kernel headers and add tools needed by genimage]
Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a target configuration for the beaglebone that supports the SGX530
graphics acceleration and builds the qt5 demos with the eglfs backend.
The imagination technologies demos and fbv are also included. The Linux
kernel is based on the omap2plus defconfig, a config fragment adds the
required settings for SGX accelerator support.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the target config for the beaglebone based on the
AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk.
Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone,
am335x-boneblack will be built and a sd card image is created with a
post-image script. The kernel and driver versions match the
ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm
revisions (1 bit sd card) and JTAG debugging.
Kernel JTAG patch: By default the kernel will disable the JTAG clock,
access via the JTAG port will not work after the kernel booted. The
AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock
alive.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: remove 1-bit MMC patch, it's causing a significant performance
regression for users of BeagleBone, which are 99.99% of the users of
this defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the recent addition of the vexpress-firmware and
arm-trusted-firmware packages, this commit improves the ARM Juno
defconfig to also build a bootloader.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Useful for testing no-MMU ARM code in Qemu.
The newer Linux kernels with DT support for Qemu Versatile aren't yet
working, so use latest 4.4 kernel.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
following commit 7de5b0d2d8, bump kernel
headers to 3.14.79 to match the kernel version.
We cannot use BR2_KERNEL_HEADERS_AS_KERNEL as some of their kernel
modifications causes glibc to fail to build.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop m68k-mcf5208 kernel patch since it's upstream.
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.8.1 2.6.0 YES OK (3)
arm_versatile 4.8.1 2.5.0 YES OK
arm_vexpress 4.8.1 2.5.0 YES OK
m68k_mcf5208 4.8.1 2.5.0 YES OK
m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK
microblazebe 4.8.1 2.5.0 YES OK
microblazeel 4.8.1 2.5.0 YES OK
mips32r2el_malta 4.8.1 2.5.0 YES OK
mips32r2_malta 4.8.1 2.5.0 YES OK
mips32r6el_malta 4.8.1 2.6.0 YES OK (3)
mips32r6_malta 4.8.1 2.6.0 YES OK (3)
mips64el_malta 4.8.1 2.5.0 YES OK
mips64_malta 4.8.1 2.5.0 YES OK
mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4)
mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4)
ppc_g3beige 4.8.1 2.5.0 YES OK
ppc_mpc8544ds 4.8.1 2.5.0 YES OK
ppc_virtex_ml507 4.8.1 2.5.0 NO OK
ppc64_pseries 4.8.1 2.5.0 YES OK
sh4 4.8.1 2.5.0 YES OK
sh4eb 4.8.1 2.5.0 NO (1) OK
sparc_ss10 4.8.1 2.5.0 YES OK
sparc64_sun4u 4.8.1 2.5.0 YES OK
sparc_sun4u 4.8.1 2.5.0 YES OK
x86 4.8.1 2.5.0 YES OK
x86_64 4.8.1 2.5.0 YES OK
xtensa_lx60 4.8.1 2.6.0 YES OK
xtensa_lx60_nommu 4.8.1 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the initial support for mx6q/dl udoo boards.
For information about these boards, please visit:
http://www.udoo.org/
In linux.fragment we disable USB support for now because kernel 4.8
hangs on udoo board.
This is been addressed by Peter Chen's kernel patch series that provides
a standard way to reset a USB hub.
When such series hit mainline, then we can bump the kernel and remove
linux.fragment.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot 2016.09.01 is a bugfix release, so bump to this version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
odroidc2's kernel remains based on 3.14. This commit upgrades the kernel
to a new commit that is now based on 3.14.79, and contains a number of
ODroidC2 related bug fixes and feature additions.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
due to an issue with odroid's u-boot, compiling u-boot with
gcc 5.x will result in a non booting image.
so a gcc 4.9.x compiler must be used.
this solve bug #9326
thanks to Erico Nunes <nunes.erico@gmail.com> for pointing
to the right issue.
Reported-by: <gahabana@mail.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the final kernel 4.8 has been released, let's use it
instead of 4.8-rc5.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using the common board/freescale/common/post-image.sh can lead
to some good amount of simplification.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot 2016.09.01 is a bugfix release, so bump to this version.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot 2016.09.01 is a bugfix release, so bump to this version.
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support
Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016.09.01 is a bugfix release, so bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- configs/acmesystems_aria_g25_128mb_defconfig,
configs/acmesystems_aria_g25_256mb_defconfig :
update default configuration files for both 128MB and 256MB version
- board/acmesystems/aria-g25/genimage.cfg
board/acmesystems/aria-g25/post-image.sh :
add support for genimage in order to build sdcard.img
- board/acmesystems/aria-g25/readme.txt : update documentation
for Aria G25 and add notes about how to build sdcard.img
Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warp7 has a BRCM43430 Wifi chipset. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- enable BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS in raspberrypi3_defconfig
- add copy of rpi-firmware/overlays directory to boot partition in genimage-raspberrypi3.cfg
- enhance post-image.sh script to add 'dtoverlay=pi3-miniuart-bt' on request
- add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay" in raspberrypi3_defconfig
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The TS-4900 uses a custom Linux 4.X from Technologic Systems:
https://github.com/embeddedarm/linux-3.10.17-imx6/tree/imx_4.1.15_1.0.0_ga
Indeed, it is not supported by mainline Linux but this work is ongoing.
This patch is inspired by a previous work for the TS-4800.
A post image script is provided to generate an image that can be
directly written to an SD card. It also adds an fpga wifi module.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we use a mainline kernel for wandboard, we no longer
need to select BR2_LINUX_KERNEL_CUSTOM_GIT, so remove it.
This fixes the following warning:
make wandboard_defconfig
/configs/wandboard_defconfig:19:warning: override: BR2_LINUX_KERNEL_CUSTOM_VERSION changes choice state
#
# configuration written to /home/fabio/buildroot/.config
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's now an sun8i-h3-orangepi-pc dts, so we can use that and drop the
hack in the post-image script.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Among others, this adds support for the ethernet interface.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With kernel 4.8-rc5 we no longer need to use the "CONFIG_SMP=n" workaround
as the reboot issue has been fixed upstream by commit 059e232089e4
("irqchip/gic: Allow self-SGIs for SMP on UP configurations")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
warp7 is well supported in mainline U-Boot 2016.09, so switch
to this version.
As the current supported kernel is based on a 4.1 kernel from NXP,
use the "warp7_secure" U-Boot target as NXP kernel needs to boot
in secure mode.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot, with the default environment, is looking for a zImage.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot, with the default environment, is looking for a zImage.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Generate an sdcard image based on the common Freescale genimage
template.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd,
imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for
the sdcard image generation.
This commit:
* Removes board/freescale/create-boot-sd.sh
* Uses the common Freescale genimage template instead.
The offset of the first partition was 1MB in the script and is
modified to 8MB in the template.
* Fixes the readme.txt file accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
genimage.cfg.template because they all use the same layout. The only
difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.
Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.
With this method the uboot-env.txt file is no longer needed, so it is
removed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Wandboard is well supported in the mainline kernel, so let's switch
from the 3.14 vendor kernel to 4.7.3 mainline kernel version.
As mainline use more dts files to support both B1 and C1 versions of the
board, adjust the dts entries accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches the galileo_defconfig to use the orignal Linux
kernel repo, which was used prior to commit
fc8cac962b.
Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for warp7, which is a board based on NXP i.MX7S processor.
More information about warp7 can be found at:
https://www.element14.com/community/docs/DOC-79058
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the kernel for Galileo board BSP from 3.8 to 3.14.
Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent U-Boot adopts Kconfig for its configuration system.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adding the '-m4' device tree blobs which allow to disable the
peripherals that are used by the Cortex-M4.
The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled
u-boot variable is set to 1.
The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here:
https://github.com/boundarydevices/freertos-boundary
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
- bump u-boot version to 2016.07
- "snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
Also we delete "snps_hs38_vdk_defconfig" as we doesn't support
uni-processor HS38 configuration for vdk any longer.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imx6ulpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.
The dts patch has already been sent to the linux-arm-kernel list
and we can remove it once it reaches a mainline kernel (in
version 4.9 probably).
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the wireless packages be selected by default to make the
usage of Wifi a bit simpler.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. It includes proper ps7_init_gpl.c/h
in it, so builds working SPL without any manual intervention.
BR2_TARGET_UBOOT_BOARD_NAME should be changed to zynq_zc706 since
U-Boot now has separate defconfig files for ZC702 and ZC706 boards.
BR2_TARGET_UBOOT_SPL_NAME should be changed to spl/boot.bin since
the Zynq image support for the mkimage tool was upstreamed and it
now generates boot.bin under spl/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. To sync with the Zedboard updates,
switch over to the Xilinx GitHub repository.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline.
Commit 46d6a561be ("zedboard: Generate BOOT.BIN automatically")
switched from the Xilinx GitHub repository to the U-Boot mainline,
but this commit gets it back to the Xilinx GitHub repository for the
following reasons:
- This defconfig still relies on the Xilinx's local repository for
the kernel. The vendor does the best test for the combination of
U-Boot and the kernel with the same release tag (xilinx-v2016.2
in this case).
- At the time of commit 46d6a561be, the u-boot-xlnx still needed
manual copy of ps7_init(_gpl).c/h in order to build a working SPL
image. So, the mainline U-Boot had advantage in that point of
time. However, the improvement in the mainline U-Boot was merged
into the u-boot-xlnx at the xilinx-v2015.3 release. Now, the
mainline and the u-boot-xlnx are even in this point of view.
- The mainline U-Boot defaults to boot FIT, so something must be
done; either patch environments around with a local patch to
switch to uImage booting (current solution), or build an FIT
with a post build script (chromebook snow does this). On the
other hand, the Xilinx repository defaults to uImage booting,
so it is straightforward, and needs no addition care.
This commit does:
- Switch to the Xilinx custom git repository, and stick to the
xilinx-v2016.2 tag.
- Delete the local patch board/avnet/zedboard/uboot/0001...
since the Xilinx custom repository can boot uImage by default.
- Enable BR2_TARGET_UBOOT_FORMAT_IMG instead of ..._FORMAT_DTB_IMG
since all the Zynq boards in U-Boot enable CONFIG_OF_EMBED.
- Replace BR2_TARGET_UBOOT_ZYNQ_IMAGE with BR2_TARGET_UBOOT_SPL_NAME
since U-Boot can natively generate the Zynq boot image now. The
Zynq image support for mkimage tool was upstreamed at v2016.01
(so xilinx-v2016.1 as well), so no additional tool is needed
any more.
- Update readme.txt
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.7 2.6.0 YES OK (3)
arm_versatile 4.7 2.5.0 YES OK
arm_vexpress 4.7 2.5.0 YES OK
m68k_mcf5208 4.7 2.5.0 YES OK
m68k_q800 4.7 q800-v2.4.0 NO (2) OK
microblazebe 4.7 2.5.0 YES OK
microblazeel 4.7 2.5.0 YES OK
mips32r2el_malta 4.7 2.5.0 YES OK
mips32r2_malta 4.7 2.5.0 YES OK
mips32r6el_malta 4.7 2.6.0 YES OK (3)
mips32r6_malta 4.7 2.6.0 YES OK (3)
mips64el_malta 4.7 2.5.0 YES OK
mips64_malta 4.7 2.5.0 YES OK
mips64r6el_malta 4.7 2.6.0 YES OK (3)
mips64r6_malta 4.7 2.6.0 YES OK (3)
ppc_g3beige 4.7 2.5.0 YES OK
ppc_mpc8544ds 4.7 2.5.0 YES OK
ppc_virtex_ml507 4.7 2.5.0 NO OK
ppc64_pseries 4.7 2.5.0 YES OK
sh4 4.7 2.5.0 YES OK
sh4eb 4.7 2.5.0 NO (1) OK
sparc_ss10 4.7 2.5.0 YES OK
sparc64_sun4u 4.7 2.5.0 YES OK
sparc_sun4u 4.7 2.5.0 YES OK
x86 4.7 2.5.0 YES OK
x86_64 4.7 2.5.0 YES OK
xtensa_lx60 4.7 2.6.0 YES OK
xtensa_lx60_nommu 4.7 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently warpboard uses a 4.0.5 kernel version from github.
Move to version 4.4.15, which is a long term supported kernel version.
With 4.4.15 we no longer need the extra two kernel patches as they have
already been upstreamed.
Use a linux fragment file, so that wireless can be functional by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generate an sdcard.img image to make it easier the deployment of a
Buildroot image.
[Peter: drop unneeded exit statement in post-image script]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Technexion's i.MX6UL Pico board running U-boot 2016.07
and kernel 4.7.
For information about this board, please visit:
http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
System on Modules product featuring a Freescale P1020 CPU,
optionally populated with 1 or 2 Gig-Ethernet PHYs,
DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot 2016.07 works well on warpboard, so bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig file for at91bootstrap was false:
s/sama5d4_xplainedsnf_uboot_secure/sama5d4_xplainednf_uboot_secure.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The TS-4800 is supported by mainline Linux as of 4.5 and by U-boot
as of v2016-07.
The package requires the custom ts4800-mbrboot routine.
A post-image script is provided to generate an image that can be
directly written to an SD card.
More details on the board here:
http://wiki.embeddedarm.com/wiki/TS-4800
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
