Since 0be0899bfd (mpc: bump to version 1.0.1 and license change), we
no longer patch configure.ac, so we can skip the autoreconf step.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the idea of skipping the intermediate gcc step seems to work
fine in most situations, it causes problems with the SSP
support. Until we can figure out a proper solution for this problem,
we need to revert back to the previous solution of a three stages
build.
This reverts commit 2babed4a50.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also drop sqlite-dont-force-posix-fallocate.patch because it is fixed upstream.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
text.o: In function `execute_command':
text.c:(.text+0x7f8): undefined reference to `fork'
text.o: In function `do_int_speller':
text.c:(.text+0x3480): undefined reference to `fork'
text.c:(.text+0x34f4): undefined reference to `fork'
text.c:(.text+0x3568): undefined reference to `fork'
text.o: In function `do_alt_speller':
text.c:(.text+0x3914): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [nano] Error 1
[Peter: fork() only in full version, so force tiny for !mmu]
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
exec.o: In function `zfork':
exec.c:(.text+0x150c): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [zsh] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed:
http://autobuild.buildroot.net/results/a08baf8821e3ee1fb9c36c8f74c4ced466af167b/http://autobuild.buildroot.net/results/f0c7379c1f405385d3a64c0349c3d9565065e8a7/http://autobuild.buildroot.net/results/c3de25ca52fdb8ffda7472cf9f7b64514954cbb1/
Change Log:
The target CFLAGS were getting mixed in during a manual build of some
omniorb pkg tools that could be viewed as host tools.
This manual build was a dirty workaround and created some bad
cornercases. So I converted the package over to actually using the
host pkg build and removed the need for a patch and custom mods in the build.
Also there wasn't a dependency on the target having python, just
host-python for performing the initial build. So depends were adjusted
accordingly. If python bindings are required, they can be found in a different
package called omniORBpy. The omniORB package only uses python for
the build process.
Fixed a bug with long double support. Currently leaving it disabled
as most targets won't use it. This allows greater toolchain compatibility.
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we have patches touching configure.ac and hence need to set
<pkg>_AUTORECONF = YES we also have to remember to set
HOST_<pkg>_AUTORECONF = YES if we build both host and target versions,
which is often forgotten (latest case was bison).
Fix it by making the host versions of _AUTORECONF and _AUTORECONF_OPT
default to whatever the target versions are set to, similar to how we
handle a number of the other variables.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build with gpu-viv-bin-mx6q libraries was broken since it wasn't
using "-DEGL_API_FB=1" flag which is found in egl.pc.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also switch to http gnu site instead of ftp.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove MB_CUR_MAX patch since it's unnecessary/insufficent for non-wchar
compilation since c29e01e61e
no-gets patch unnecessary also since it's been fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
/opt/test/buildroot/buildroot/output/host/usr/bin/arm-buildroot-uclinux-uclibcgnueabi-gcc inetd.o servtab.o builtins.o sig.o daemon.o setproctitle.o mysleep.o -o inetd
servtab.o: In function `loadconfigfile.clone.0':
servtab.c:(.text+0x98c): warning: gethostbyname is obsolescent, use getnameinfo() instead.
inetd.o: In function `main':
inetd.c:(.text+0x8a4): undefined reference to `fork'
inetd.c:(.text+0x974): undefined reference to `fork'
daemon.o: In function `daemon':
daemon.c:(.text+0xc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [inetd] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
./tmp./bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status.
./bin/arm/lmbench.a(lib_tcp.o): In function `tcp_connect/'cc8Ta2C2.o: Inmake[2]: function `*** [../bin/arm/bw_file_rd] Error 1
initialize':
lib_tcp.c:make[2]: (.text+0x208): warning: gethostbyname*** Waiting for unfinished jobs....
is obsolescent, use: getnameinfo
bw_pipe.c(): (instead..text
/+tmp0x134/)cc5yg1Q2.o: :undefined In referencefunction to`server_main `'fork:
'bw_tcp.c
.:.(./textbin+/0x298arm)/:lmbench.a (undefinedlib_timing.o )reference: Into function`fork '`
benchmp/'tmp:/
cc5yg1Q2.olib_timing.c:: (In.text function+0x34fc `)main: 'undefined:
bw_tcp.creference: (to. text`fork+0x370'
)collect2: : undefined reference to `fork'
../bin/armld returned 1 exit status/lmbench.a(lib_timing.o): In function
`benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_pipe] Error 1
make[2]: *** [../bin/arm/bw_tcp] Error 1
../bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_mmap_rd] Error 1
../bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_mem] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
mountd-mountd.o: In function `main':
mountd.c:(.text+0x1264): undefined reference to `fork'
mountd.c:(.text+0x1320): undefined reference to `fork'
mountd-rmtab.o: In function `ha_callout':
rmtab.c:(.text+0xa8): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [mountd] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to patchlevel 3 since 2 is gone upstream.
Also switch to use http://snapshot.debian.org/ instead of BR2_DEBIAN_MIRROR to
avoid disappearing packages.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to glibc-2.18/ports/sysdeps/mips/preconfigure,
if no -mabi was passed to CFLAGS, then it defaults to -mabi=n32.
This breaks o32 and n64 builds for MIPS64. Therefore, it is
necessary to append -mabi to CFLAGS.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The source files of trace-cmd already define _LARGEFILE64_SOURCE, but
Buildroot passes it again on the build command line through CFLAGS,
which causes a build error. We fix this by filtering out our
definition of _LARGEFILE64_SOURCE from the CFLAGS before passing them
to the trace-cmd Makefile.
Fixes the warning visible at:
http://autobuild.buildroot.net/results/1c4567a230940a5287d03e2a5c2c7afbdc64cd36/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a quite old thing, latest version is from 2009
but it is useful to applications based on xmotif.
It has been tested with buildroot on ARM/iMX6.
[Peter: pass --no-recursion to not error out in test/configure]
Signed-off-by Thierry Bultel <thierry.bultel@wanadoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnupg is compiled with --enable-minimal flag. This produces a binary that only
supports ElGamal and DSA public key algorithms.
RSA has been the default for `gpg --gen-key` since 2009, so it makes sense to
be able to build a gnupg binary that supports it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The plugin infrastructure is based on shared objects so it won't build
for static-only scenarios.
And the daemon uses fork() so MMU is required.
[Peter: move below suboptions]
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
./libfindtools.a(pred.o): In function `launch':
pred.c:(.text+0x240c): undefined reference to `fork'
collect2: .ld returned 1 exit status/libfindtools.a
(pred.o): In function `launch':
pred.c:(.text+0x240c): undefined reference to `fork'
collect2: ld returned 1 exit status
make[4]: *** [oldfind] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: *** [find] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
logrotate.o: In function `switch_user_permanently':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:129: undefined reference to `fork'
logrotate.o: In function `removeLogFile':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:431: undefined reference to `fork'
logrotate.o: In function `mailLog':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:597: undefined reference to `fork'
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:615: undefined reference to `fork'
logrotate.o: In function `compressLogFile':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:533: undefined reference to `fork'
collect2: ld returned 1 exit status
make[1]: *** [logrotate] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also drop diffutils-gets-no-longer-exists-in-eglibc-2.16.patch because
gets is unconditionally undefined now so we don't need the patch.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It was missing the dependency on the toolchain features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump version to fix compile error with 1.1.7.
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the build on ARC as well, as 2.0.17+ includes a fix
that checks for existence of 'sysctl'.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/acf/acfefc4f0f23ef646094ec427c9502eab7b86736/
Corrects a number of issues with the openssl handling:
- Libraries have to be listed after the object files using them, so pass
openssl linker statements in LIBS rather than COPT
- Openssl support library is libcrypto, not libcrypt
- Openssl need zlib
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We should use our LDFLAGS when building as well. At the same time, drop the
unused CIVETWEB_LDFLAGS.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes for USB and audio; enable video capture.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to the latest cset in master for a bunch of fixes
for transconding, muxer and html5 video.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Davis <sunsetbrew@sunsetbrew.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: white space fixes]
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is required for building the 'crypto', 'odbc', 'ssh'
and 'ssl' Erlang applications. These apps are skipped
regardless of whether they're enabled and their dependencies
can be met if this environment variable isn't set.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on the list. They have been broken for a long time, and are
not commonly used in embedded systems.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt translation files are currently created and moved under
$(STAGING_DIR)/usr/translations but not installed on the target.
This patch defines the translations directory to
/usr/share/qt/translations and defines a QT_INSTALL_TARGET_TRANSLATIONS
macro to deploy them from the staging directory to the target directory.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
luaposix includes a curses binding which is optional and auto-detected by autotools.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Releases are no longer named 5.1.X, just the X portion remains now.
Fixes autoreconf issues with the automake bump, however since the patch
is no longer required that's not an issue now.
[Peter: now needs IPv6]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There's no stated purpose and it breaks with automake 1.12+
If it breaks in some scenario ping me, i've got a patch to fix the
autoreconf issue and re-enable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
commit c798bec25 "uclibc: set MMU usage accordingly" defines UCLIBC_MMU_CONFIG,
but forgot adding it to UCLIBC_SETUP_DOT_CONFIG. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Carlos Quijano <carlos@crqgestion.es>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A python library that calculates CRC checksums of the CCITT/XModem
variant.
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libpci.so* is installed without +x permissions thus preventing
stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libiconv.so* and libcharset.so* are installed without +x permissions
thus preventing stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libintl.so* is installed without +x permissions thus preventing
stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The python language bindings for ZeroMQ.
[Peter: moved version note to .mk, single toolchain deps line]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
some CMake stuff comes from LuaDist, but CMake is not the primary build infrastructure of LuaCrypto.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mudflap library is only useful if one uses the -fmudflap gcc
option to do more checks on pointers/arrays. This commit adds an
option to enable/disable mudflap support at the gcc level. By default,
it is disabled, which saves a little bit of build time compared to the
default of gcc which consists in enabling mudflap support.
Since mudflap is now disabled by default, and ensured to never be enabled
on platforms where it is not available, some gcc.mk code that was used to
disable mudflap in problematic configurations can be removed.
Whether -fmudflap is used when building is left to the user.
[Peter: tweak commit text, fix white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit refactors how Stack Smashing Protection support is handled
in Buildroot:
*) It turns the BR2_TOOLCHAIN_BUILDROOT_USE_SSP option into an option
that only enables the SSP support in uClibc, when using the internal
toolchain backend.
*) It adds an hidden BR2_TOOLCHAIN_HAS_SSP option that gets enabled
when the toolchain has SSP support. Here we have the usual dance:
glibc/eglibc in internal/external backend always select this
option, in the case of uClibc/internal, it gets selected when
BR2_TOOLCHAIN_BUILDROOT_USE_SSP is enabled, in the case of
uClibc/external, there is a new configuration option that the user
must select (or not) depending on whether the toolchain has SSP
support.
*) It adds a new options BR2_ENABLE_SSP in the "Build options" menu,
to enable the usage of SSP support, by adding
-fstack-protector-all to the CFLAGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The HOST_GCC_CONFIGURE_SYMLINK creates a symbolic link
$(@D)/build/configure -> $(@D)/configure for each build step of
gcc. However, it was only using 'ln -s' and not 'ln -sf', which was
causing problems when doing 'make host-gcc-final-reconfigure' for
example, because the configure commands (including this macro) are
being re-executed, but the symbolic link already exists.
Changing this symbolic link creation to 'ln -sf' fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Each stage of the gcc build needs to make a small dance before the
configuration step to create a build sub-directory and a symbolic link
to the configure script. The common gcc.mk had a
HOST_GCC_CONFIGURE_SYMLINK already used by the gcc-initial and
gcc-intermediate steps, but the gcc-final step wasn't using it.
This commit fixes this inconsistency, and therefore removes the
HOST_GCC_FINAL_CONFIGURE_SYMLINK macro.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for eglibc 2.17 was added to the internal toolchain
backend for 2013.08. This commit now adds glibc 2.18 support to the
internal toolchain backend.
Since the building procedure is very similar to the one of eglibc, we
have renamed the 'eglibc' package to 'glibc', and made it capable of
handling either glibc or eglibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The option to enable C++ support was still located in
toolchain/toolchain-buildroot/Config.in.2, with misc other toolchain
options. It seems more logical to have this option with the other
options to select the languages supported by the cross-compiler, so we
move it next to the Fortran/Objective-C options in
package/gcc/Config.in.host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Objective-C support in the gcc package by making
sure that the runtime Objective-C library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_OBJC option rather than the non-existing
BR2_GCC_CROSS_OBJC option, to decide whether Objective-C support
should be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Fortran support in the gcc package by making
sure that the runtime Fortran library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text, to no longer mention gcc < 4.2 since they are no longer
supported in Buildroot, and to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_FORTRAN option rather than the non-existing
BR2_GCC_CROSS_FORTRAN option, to decide whether Fortran support should
be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When NPTL support was introduced, gcc required a three stages build
process. Since gcc 4.7, this is no longer necessary, and it is
possible to get back to a two stages build process. This patch takes
advantage of this, by doing a two stages build process when possible.
We introduce a few hidden kconfig options:
* BR2_GCC_VERSION_NEEDS_THREE_STAGE_BUILD, which is set by the gcc
Config.in logic to indicate that the compiler might need a three
stages build. Currently, all versions prior to 4.7.x are selecting
this kconfig option.
* BR2_TOOLCHAIN_LIBC_NEEDS_THREE_STAGE_BUILD, which indicates whether
the C library might need a three stages build. This is the case for
eglibc, and uClibc when NPTL is enabled.
* BR2_TOOLCHAIN_NEEDS_THREE_STAGE_BUILD finally is enabled when both
of the previous options are enabled. It indicates that a three
stages build is actually needed.
In addition to those options, the uClibc/gcc build logic is changed to
use only a two stages build process when possible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason, the eglibc.mk file was trying to install libstdc++.so
from eglibc to the target. But the C++ standard library is provided by
GCC, not by the C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The TARGET_{CC,CXX,LD,...} variables no longer contain any --sysroot
option, since we're now using a toolchain wrapper for external
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Automatic IPv6 Connectivity Configuration Utility for users of a
IPv6 tunnel broker, developed by sixxs.net
[Peter: drop strip patch, pass TARGET_CONFIGURE_OPTS]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix C++ dependency and trailing spaces, drop ';' from fixup hook]
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
tcping does a TCP connect to the given ip/port combination. The user can
specify a timeout in seconds. This is useful in shell scripts running in
firewalled environments. Often SYNs are just being dropped by firewalls,
thus connection establishment will be retried several times (for minutes)
until a TCP timeout is reached. With tcping it is possible to check first
if the desired port is reachable and then start connection establishment.
http://www.linuxco.de/tcping/tcping.html
[Peter: wrap help text, pass TARGET_LDFLAGS]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upgrade to the latest uclinux CVS snapshot, gives us blackfin support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The plugin infrastructure is based on shared objects so it won't build
for static-only scenarios.
And the daemon uses fork() so MMU is required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building for nommu flat targets the CFLAGS/CXXFLAGS/LDFLAGS must be
adjusted accordingly.
For gcc this means passing along -Wl,-elf2flt to signal the linker.
For ld this means -elf2flt.
Also correct the error in STACKSIZE settings from commit 9edf482d which
is setting gcc flags as ld flags and will surely fail (no package uses
it at the moment so it was never seen).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add host-elf2flt to the gcc common dependencies so we get it built after
binutils but before gcc/uclibc since it's required for all packages and
in some uClibc configuration scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support is for pserver mode anonymous CVS.
source-check is based on login since many servers don't support or have
ls/rls disabled.
Usage is pretty straightforward.
PKG_SITE defines the site hostname and remote directory.
The module is defined by the bare package name.
Version is date based.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A port knocking implementation with daemon and user application.
[Peter: drop trailing newline in Config.in]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop libusb-compat since it's no longer required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 2eb995759 "vsftpd: needs mmu" adds "depends on BR2_TOOLCHAIN_HAS_THREADS".
The build error is:
sysutil.c:(.text+0x37ac): undefined reference to `fork'
Thus it should depend on BR2_USE_MMU rather than BR2_TOOLCHAIN_HAS_THREADS.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is required to build custom port drivers/NIFs or code that
uses erl_interface.
Signed-off-by: Hans Bulfone <hans@nil.at>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/955/955ed1af28f6ff9912adddc0342d1f3ca65e5b4d/
Commit 62146ea3ad (change package tarball compression to xz whenever possible)
changed a number of packages to use .xz format tarballs. Unfortunately this
doesn't work for packages from github, as it delivers gzip compressed tarballs
even when a .xz is requested.
Fix it by reverting this change for the packages using github.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Parallel 'make install' seems to deadlock here (make 3.81). Work around it
by disabling parallel make for the install step.
We only disable parallel make for the install step, as the build step works
with parallel make, and webkit is a huge package, so build time goes up
significantly with make -j1.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also apply the following patches:
- upstream fix for 32-bit autotools
- upstream fix for conditional gstreamer build of gtklauncher
- upstream fix for detecting the latest harfbuzz
- Update existing patch for disabling docs
- Update existing patch for execinfo_h
- upstream patch for the MIPS DFG support. This fixes
compilation problems on MIPS.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding configuration options that if libssh2 is selected, compile libcurl
with --with-ssh config flag.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also cleaned the package makefile up by removing explicitly naming
the source along with moving the configure of the package down below
the standard package declarations.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Lua website says:
"Like most names, it should be written in lower case with an initial capital,
that is, "Lua". Please do not write it as "LUA", which is both ugly and
confusing, because then it becomes an acronym with different meanings for
different people."
http://www.lua.org/about.html
So, let's honor this request in buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, $(PKG)_PATCH allow only to download patches from same URL than tarball.
This patch allow to detect when plain URL are used in $(PKG)_PATCH and correctly
handle them.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If xzcat is not present on the host system, buildroot bails out early asking
the developer to install it (xzcat is now a DL_TOOLS_DEPENDENCY)
Conversely, when BR2_TARGET_ROOTFS_CPIO_XZ is enabled, then host-xz is a
build dependency, and no manual action is required from the developer.
Because the second approach is nicer, also build host-xz when xzcat is not
available, using the host-prerequisite and suitable-host-pkg mechanisms,
already used for tar.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to simplify determining the right extractor tool for a given
file type, this patch introduces a make function 'suitable-extractor'.
Its usage is $(call suitable-extractor,filename), and it returns the
path to the suitable extractor.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream has a large number of patches lined up for the next 0.9.33.x bugfix
release;
http://git.uclibc.org/uClibc/log/?h=0.9.33
Add them here, as atleast some of them are quite critical (E.G. the eventfd
issue gets triggered by recent glib versions).
I've skipped the microblaze and xtensa fixes as we don't currently support
those with 0.9.33.2.
Drop uclibc-0002-Add-definition-of-MSG_WAITFORONE-and-MSG_CMSG_CMSG_CLOEXE.patch
as that is a subset of uclibc-0035-socket.h-pull-socket_type.h-from-eglibc.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Removed patches that were are now in version 2.23 of util-linux along with
fixed up other patches so they apply cleanly.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes and improvements for USB, audio sync, camera support,
codecs, HDMI framerate and audio, and GPU freezes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gnutls, nss and polarssl backends.
Add support for libidn and zlib.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build issue with the avr32 toolchain:
http://jenkins.free-electrons.com/job/buildroot/config=atngw100_defconfig/104/
Invalid configuration `MAKEINFO=missing': machine `MAKEINFO=missing' not
recognized
Instead pass it in the environment of ./configure, similar to how it was
done originally in 62322acb2c (toolchain/gcc: disable makeinfo).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So we don't end up pulling in host-busybox (which doesn't exist) if
KMOD_TOOLS is enabled.
Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And deprecate 3.9.x series to match upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Looks like this was lost in 20d4792e.
[Peter: use _INSTALL_INIT_SYSV, explicitly delete script on uninstall]
Signed-off-by: Peter Sanford <psanford@nearbuysystems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
PCRE C++ unit tests fails to build properly for static scenarios since
it's not taken account for properly in the build system.
Just disable them, they're never installed to the target.
Fixes:
http://autobuild.buildroot.net/results/970/97027b981659502ff12c345c3caef4933cddb354/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When libgcrypt support is enabled the configure script will try to
find libgcrypt-config in the PATH. If the host distribution has it then
brokeness ensues. Fixes:
http://autobuild.buildroot.net/results/eca/eca10b8360354e7e51406f7ac942d343987bde5e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation of older GCC versions (E.G. 4.3.x) contain constructs
that are no longer accepted by recent (5.x) versions of makeinfo, breaking
the build.
The documentation isn't really needed, and takes up extra space/build time,
so work around it by disabling documentation, like we had before the
conversion of the toolchain to the package infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.
[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit removes the module-init-tools package and adds the
relevant Config.in.legacy entries to ease the migration for users.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since module-init-tools is deprecated, we now want to use kmod instead
for the installation of modules during the kernel build process. In
order to do this, we need to be able to build a host variant of kmod,
which is want this patch allows to do.
Note that only the depmod tool is installed on the host, since that's
the only one likely to be used on the host in a cross-compilation
context.
[Peter: needs AUTORECONF for the host as well. Fix comment while we're at it]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The KMOD_INSTALL_TOOLS macro uses a non-conventional indentation. This
commit fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to be sure that we just deal with the includes related with
the actual package described into libffi.mk it is better to explicitly
specify the version of the libffi we deal with into the post install
hook.
As dev files are deprecated in target rootfs target post install
hook was also deleted.
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libsecret is a library for storing and retrieving passwords
and other secrets. It communicates with the "Secret Service"
using DBus. gnome-keyring and ksecretservice are both
implementations of a Secret Service.
libsecret replaces libgnome-keyring.
https://wiki.gnome.org/Libsecret
[Peter: also needs host-intltool]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Updating revision of libcurl to version 7.32.0
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There is a simple typo in package/ti-gfx/ti-gfx.mk, which the
following patch corrects.
Signed-off-by: Martin Creutziger <buildroot@martin.creutziger.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It requires OpenSSL and IPv6 support and it should probably be an
option since SSL support uses GnuTLS thus making a huge target
footprint with 2 SSL/TLS libraries for full support.
But most of all it's considered experimental.
Fixes:
http://autobuild.buildroot.net/results/836/836c39c11cecbcf9399675ba3ab01202417b9642/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 9169810a9b ("neon: replace
'choice' for XML library with two options") the option
BR2_PACKAGE_NEON_NOXML no longer exists. However, it was not taken
into account properly within neon.mk, as this option was still used to
disable webdav support when no XML library has been selected.
Fixes:
http://autobuild.buildroot.org/results/7ed/7ed657570d83b28389dd8c01ffdd895d2e8d145f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make it use external instead of bundled libevent - it's better for size
reasons (avoiding possible duplication) and security reasons (easier to
upgrade one global library than possibly two or more, and generally
upstream would probably be more responsive to those).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The strongswan configure.in uses the AC_LIB_PREFIX macro, which adds
--with-lib-prefix and --without-lib-prefix options, and which, by
default assumes that adding ${prefix}/lib to LDFLAGS and
${prefix}/include to CPPFLAGS is a good idea. Obviously, when
cross-compiling, it is definitely not a good idea.
In the specific case of strongswan, the result is that when testing if
the backtrace() function was available, the small C program was being
built and linked with -L/usr/lib. So when the host architecture and
target architecture are identical, it may find the backtrace()
function in the host C library, without looking at the target C
library:
configure:16457: /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/usr/bin/x86_64-unknown-linux-uclibc-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -L/usr/lib conftest.c >&5
/home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/bin/ld: warning: libc.so.0, needed by /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/lib/../lib64/libgcc_s.so, may conflict with libc.so.6
Passing --without-lib-prefix prevents this default behavior from
happening, and no stupid value is added to CPPFLAGS or LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Restore missing mips->mipsel symlink. It appears ltrace was
packaged incorrectly and the symlink got lost. See
http://lists.alioth.debian.org/pipermail/ltrace-devel/2013-August/000938.html
[Peter: add a comment explaining why]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The MesaLib 7.10.3 tarball has been moved on ftp.freedesktop.org from
pub/mesa/7.10.3/ to pub/mesa/old_versions/7.x/7.10.3/.
A bump to a newer release is only coming after Buildroot 2013.08, so for now
let us just change URL to let the download work properly.
Reported-by: Ryan Wilkins <ryan@deadfrog.net>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces a patch to kmod that ensures _Static_assert()
is only used if available. The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/9daf0f46642020591731e20d3bf9041ff6259846/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reorder the entries in the top-menu, in a more significant order.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of redis fail to build when ccache is enabled, due to one of our
own patches. The construct
make CC=$(CC) target1 target2
would result in
make CC=ccache <tuple>-gcc target1 target2
and here <tuple>-gcc would be treated as a target and the compiler used
would be just 'ccache'.
Reported-by: Johan Sagaert <sagaert.johan@skynet.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5628776c4a
"toolchain-external: fix lib64 symlinks"
lib64 is a symlink to lib so there is no reason to copy the libraries
to lib64 anymore. This fixes multiple building problems
for buildroot toolchains:
[...]
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libuClibc-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libuClibc-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil.so.0'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil.so.0'
are the same file
rmdir: failed to remove
'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64': Not a directory
[...]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
fix bad escape sequences in init script and add correct lib for pc file.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON library can either be compiled without XML support, with XML
support provided by Expat, or with XML support provided by
libxml2. Until now, to represent this, a Kconfig 'choice..endchoice'
was used. Unfortunately, another package cannot 'select' one of the
possible choices. So for example, a package such as 'rpm', or the
to-be-added 'subversion' package could not select their dependencies,
they had to do a 'depends on !BR2_PACKAGE_NEON_NOXML', which is not
how Buildroot handles library dependencies in general.
So, this commit replaces the 'choice...endchoice' block with simply
two configuration options that are mutually exclusive. The option
names are not changed, so no Config.in.legacy addition is needed.
An hidden option BR2_PACKAGE_NEON_XML is provided, so that packages
that need XML support in NEON but don't care whether it's provided by
Expat or libxml2 can simply select BR2_PACKAGE_NEON_XML.
The rpm package is updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
minidlna will detect and use the libiconv library if
the package is selected. In that case, we need to link
against -liconv.
Fixes the following linking problem:
tagutils/tagutils.o: In function `do_iconv.constprop.6':
tagutils.c:(.text+0x4d5c): undefined reference to `libiconv_open'
tagutils.c:(.text+0x4da0): undefined reference to `libiconv'
tagutils.c:(.text+0x4e08): undefined reference to `libiconv_close'
[Peter: wrap COMMON_LIBS line]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON intrinsics used by Pulseaudio are only available in either
-mfloat-abi=softfp or -mfloat-abi=hard, not in
-mfloat-abi=soft. Therefore having NEON support in the processor is
not sufficient, we also should *not* be using soft-float.
Moreover, looking at BR2_ARM_ENABLE_NEON to know if the processor has
NEON support is incorrect. This option is only here to allow the user
to tell whether the processor has NEON support or not, for the ARM
cores that only have optional NEON support. Instead, the
BR2_ARM_CPU_HAS_NEON option really indicates whether NEON is available
or not (it is either set automatically by the ARM cores that always
have NEON support, or when BR2_ARM_ENABLE_NEON is enabled by the user
to confirm that his ARM processor has NEON support).
This fixes build failures such as
http://autobuild.buildroot.org/results/675/675c96059be348b594cc92980bef391126931c83/build-end.log
[Peter: add comment about reason for soft abi check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code to set ABI on ARM does the following:
ifeq ($(BR2_arm)$(BR2_armeb),y)
... set ABI without 'hf' suffix ...
else ifeq ($(BR2_ARM_EABIHF),y)
... set ABI with 'hf' suffix ...
endif
But since $(BR2_arm)$(BR2_armeb) will always be 'y' in the cases where
BR2_ARM_EABIHF is 'y', it means that the 'else' part of the condition
will never be used.
Fix this by appending 'hf' to the ABI variable when BR2_ARM_EABIHF is
selected.
[Peter: put EABIhf handling under arm/armeb conditional for consistency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several of the lines in S50sshd script have a strange mix of spaces
and tabs, that at least do not look consistent with neighboring lines.
This patch makes the spacing consistent, and also strips the trailing
spaces.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(TARGET_DIR) variable is required when building
python-setuptools for the target otherwise the build system detects
the host installation which leads to permission error problems
like these:
Setuptools installation detected at /usr/lib64/python2.7/site-packages
Renaming /usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info to
/usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info.OLD.1377005697.88
OSError: [Errno 13] Permission denied
Moreover, remove the PYTHONPATH variable for host variant since it's
not needed.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
HarfBuzz is an OpenType text shaping engine
http://www.freedesktop.org/wiki/Software/HarfBuzz/
[Peter: Move to libraries/graphics, needs C++ support]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like 'attr', 'acl' doesn't use automake to control the
build/installation of its components, and the static-only installation
process was not installing libacl.a. We add a patch that fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
When attr is built static-only, it forgets to install its libattr.a
file, which leads to the build failure of packages such as 'acl' that
rely on attr.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
