If the swupdate configuration contains CONFIG_UBOOT=y it uses
libubootenv to access the U-Boot environment.
We don't have Buildroot config options for all the different optional
dependencies of swupdate, instead we rely on the user to select the
appropriate packages and simply add the dependency in the .mk file. Do
this for libubootenv as well. swupdate doesn't have anything like
HAVE_LIBUBOOTENV, it just assumes libubootenv is available.
Fixes:
bootloader/uboot.c:23:10: fatal error: libuboot.h: No such file or directory
23 | #include <libuboot.h>
Note that libubootenv is normally built before swupdate (alphabetical
ordering), so the error only occrus with BR2_PER_PACKAGE_DIRECTORIES or
when building swupdate directly.
Note that the autobuilders don't have this error, because they only
build swupdate with a default configuration that doesn't have U-Boot
support.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
If BR2_PER_PACKAGE_DIRECTORIES is enabled and Buildroot is using
HOST_MAKE for a Kconfig package. The $(1)_KCONFIG_RULES does not work
correctly, and kconfig-package-regen-dot-config will always run the
'oldconfig' target.
This is because $(1)_KCONFIG_RULES expands before the first recipe line
of .stamp_dotconfig. $(1)_KCONFIG_RULES attempts to call $(HOST_MAKE),
which requires that the per-package/<pkg>/host directory has been setup.
But that directory is not setup until a later recipe line. This results
in $(1)_KCONFIG_RULES silently failing, and so always configuring with
'oldconfig'.
Fix the issue by calling the command as part of the recipe, so
$(HOST_MAKE) will be ready in time. As the comment on $(1)_KCONFIG_RULES
describes, we should not use backticks. Use an intermediary file to
store the output of the command, so that backticks are not needed.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This release fixes the following Security Vulnerabilities:
- CVE-2022-42898 PAC parse integer overflows
- CVE-2022-3437 Overflows and non-constant time leaks in DES{,3} and
arcfour
- CVE-2022-41916 Fix Unicode normalization read of 1 bytes past end of
array
- CVE-2021-44758 NULL dereference DoS in SPNEGO acceptors
- CVE-2021-3671 A null pointer de-reference when handling missing sname
in TGS-REQ
- CVE-2022-44640 Heimdal KDC: invalid free in ASN.1 codec
Note that CVE-2022-44640 is a severe vulnerability, possibly a 10.0
on the Common Vulnerability Scoring System (CVSS) v3, as we believe
it should be possible to get an RCE on a KDC, which means that
credentials can be compromised that can be used to impersonate
anyone in a realm or forest of realms.
Heimdal's ASN.1 compiler generates code that allows specially
crafted DER encodings of CHOICEs to invoke the wrong free function
on the decoded structure upon decode error. This is known to impact
the Heimdal KDC, leading to an invalid free() of an address partly
or wholly under the control of the attacker, in turn leading to a
potential remote code execution (RCE) vulnerability.
This error affects the DER codec for all extensible CHOICE types
used in Heimdal, though not all cases will be exploitable. We have
not completed a thorough analysis of all the Heimdal components
affected, thus the Kerberos client, the X.509 library, and other
parts, may be affected as well.
This bug has been in Heimdal's ASN.1 compiler since 2005, but it may
only affect Heimdal 1.6 and up. It was first reported by Douglas
Bagnall, though it had been found independently by the Heimdal
maintainers via fuzzing a few weeks earlier.
While no zero-day exploit is known, such an exploit will likely be
available soon after public disclosure.
- CVE-2019-14870: Validate client attributes in protocol-transition
- CVE-2019-14870: Apply forwardable policy in protocol-transition
- CVE-2019-14870: Always lookup impersonate client in DB
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds an option that allows to install the u-boot.elf file
produced when CONFIG_REMAKE_ELF=y in the U-Boot configuration.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump ATF to boundary-lf-5.15.52-2.1.0.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- U-Boot branch boundary-v2022.04 from Boundary repo.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Based on NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- i.MX Hantro V4L2 Daemon. Provides the vsidaemon, which is needed for
V4L2 nodes to work.
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an INSTALL_STAGING_CMDS define as libraries needed by
imx-vpu-hantro-daemon.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Highligts include support for MbedTLS and a serious memory leak fix to
the GnuTLS backend.
Changes:
- Add support for MbedTLS
- Add support for per-provider interface to bind to
- Use HTTP-only for api.ipify.org, default (fallback) checkip service
Fixes:
- serious memory leak in GnuTLS backend
- ca-trust-file has no effect for GnuTLS
- handle easyDNS "no update required" as OK status
- use configured server:port, don't force port 443 for HTTPS
(From https://github.com/troglobit/inadyn/releases/tag/v2.10.0)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the host-qemu package to enable testing on gitlab.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The edk2 project is licensed under the BSD-2-Clause license with a patent
grant, as per commit 304bff7223a8 ("edk2: Change License.txt from 2-Clause
BSD to BSD+Patent").
There is a BSD-2-Clause-Patent SPDX license identifier[1] for this case,
therefore refine the edk2 package to use this more specific identifier.
[1]: https://spdx.org/licenses/BSD-2-Clause-Patent.html
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The edk2-platforms project is licensed under the BSD-2-Clause license with
a patent grant, as per commit ae604e4ffe8f ("edk2-platforms: Change
License.txt from 2-Clause BSD to BSD+Patent").
There is a BSD-2-Clause-Patent SPDX license identifier[1] for this case,
therefore refine the edk2-platforms package to use this more specific
identifier.
[1]: https://spdx.org/licenses/BSD-2-Clause-Patent.html
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issue:
CVE-2022-45061: An issue was discovered in Python before 3.11.1. An
unnecessary quadratic algorithm exists in one path when processing some
inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably
long name being presented to the decoder could lead to a CPU denial of
service. Hostnames are often supplied by remote servers that could be
controlled by a malicious actor; in such a scenario, they could trigger
excessive CPU consumption on the client attempting to make use of an
attacker-supplied supposed hostname. For example, the attack payload could
be placed in the Location header of an HTTP response with status code 302.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d07e6b70 (boot/uboot/uboot.mk: add pmufw.elf support) broke
configurations where the UBOOT_ZYNQMP_PMUFW was blank. Previously it
would set the U-Boot CONFIG_PMUFW_INIT_FILE to the blank string, but now
it will set it to ".bin" which causes U-Boot to fail to build.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Brings a number of fixes: https://dev.gnupg.org/T6106
Add patch 0001 to fix undefined reference to `ks_ldap_free_state'
backported from commit 7011286ce6e1fb56c2989fdafbd11b931c489faa
Signed-off-by: Michael Fischer <mf@go-sys.de>
[Peter: add changelog info]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If a custom os_prefix directory is specified then the Raspberry Pi
firmware probes for the README file in overlays directory. If
this is not found then firmware will use the top-level overlays
directory which can be confusing if os_prefix is used in conjunction
with other filters to implement alternate boot behaviour.
In Raspberry Pi OS the README file is always included to ensure
that the relevant documentation is in sync with the overlays. Rather
that including the entire file let's just include an empty file so
that overlays directory is consistent with the Raspberry Pi OS
APT package.
From
https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix
Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared
with the main OS (i.e. os_prefix is ignored).
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable aarch64 support for rpi-userland to provide
vcmailbox and vcgencmd in 64bit builds. The are useful
for programming OTP and system debug.
The ARM64=ON parameter restricts the make targets
to only include those supported on 64-bit i.e. it
excludes the legacy Broadcom EGL drivers.
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SSCEP is a client-only implementation of the SCEP (Cisco System's Simple
Certificate Enrollment Protocol).
The goal of SCEP is to support the secure issuance of certificates to
network devices in a scalable manner, using existing technology whenever
possible. The protocol supports the following operations:
* CA and RA public key distribution
* Certificate enrollment
* Certificate and CRL query
Certificate and CRL access can be achieved by using the LDAP protocol,
or by using the query messages defined in SCEP.
CC: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Copy default $DAEMON_ARGS from systemd service to sysv init script.
Make GITLAB_RUNNER_USER home directory the same as default
--work-directory (-d) flag.
Run sysv daemon process using root user (remove -c option)
This is needed to correctly access config files as specified.
System access can still be limited with gitlab-runner `--user` flag.
Use same $DAEMON_ARGS variable name so it can be overwritten in
/etc/default/gitlab-runner environment file in both cases.
Signed-off-by: Marek Metelski <marek.metelski@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- Fix use of $DAEMON, found by check-package
- Expects DAEMON to be name of daemon controlled by script, this
causes ripple efects in rest of script
- Recommend `chmod a-x`, .mk file installs with `-m 0755`
- Fix shellcheck warnings:
- Use "$VAR" in case of spaces in filenames
- recommend not using $? in if stmt, should use `if start-stop ...`
- mismatch in indentation in case-esac
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In 5b3b2d80f4 we dropped dbus as a build
dependency, however we still need it when building with systemd so
that the service directory is available via pkg-config.
In addition we can drop --with-dbus-datadir by unconditionally
requiring dbus as the datadir will then be fetched from pkg-config.
Fixes:
checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required
http://autobuild.buildroot.net/results/4a48676460e6ce588897598f0022ec840b4b4b8d/
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The edk2 package can be configured for platform Arm Sgi575 but this
does not build correctly:
Usage: build.exe [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]
build.exe: error: option -a: invalid choice: '-b' (choose from 'IA32', 'X64', 'EBC', 'ARM', 'AARCH64', 'RISCV64')
make[1]: *** [package/pkg-generic.mk:293: /home/thomas/buildroot/buildroot/output/build/edk2-edk2-stable202102/.stamp_built] Error 2
make: *** [Makefile:84: _all] Error 2
Add the necessary definitions to fix the build.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As stated in [1] this and future release will only be hosted on
freedesktop's gitlab.
Archives hosted on gitlab are missing the gpg signature.
1: 49bb905131
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop local patch that has been upstreamed[0] and drop the endianness
handling too since from this commit[1] on it's handled by using Linux
macro __LITTLE_ENDIAN.
[0]: 4a555ffb77
[1]: b3da33576d
Fixes:
http://autobuild.buildroot.net/results/6178fbfbe9fe762645b1907c4ceb032a00e75a89/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am not really maintaining these packages, I don't follow closely
enough nor use them to take the time to make the necessary changes.
Giulio has been much more reactive than me to fix issues and he is
already listed for them anyway.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[yann.morin.1998@free.fr: fix spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
igh-ethercat comes with a small number of patched Linux kernel network
drivers, which aim at replacing the ones available in upstream Linux
kernel. All those drivers are provided only for specific kernel
releases. For example:
r8169-2.6.24-ethercat.c
r8169-2.6.24-orig.c
r8169-2.6.27-ethercat.c
r8169-2.6.27-orig.c
r8169-2.6.28-ethercat.c
r8169-2.6.28-orig.c
r8169-2.6.29-ethercat.c
r8169-2.6.29-orig.c
r8169-2.6.31-ethercat.c
r8169-2.6.31-orig.c
r8169-2.6.32-ethercat.c
r8169-2.6.32-orig.c
r8169-2.6.33-ethercat.c
r8169-2.6.33-orig.c
r8169-2.6.35-ethercat.c
r8169-2.6.35-orig.c
r8169-2.6.36-ethercat.c
r8169-2.6.36-orig.c
r8169-2.6.37-ethercat.c
r8169-2.6.37-orig.c
r8169-3.10-ethercat.c
r8169-3.10-orig.c
r8169-3.12-ethercat.c
r8169-3.12-orig.c
r8169-3.14-ethercat.c
r8169-3.14-orig.c
r8169-3.16-ethercat.c
r8169-3.16-orig.c
r8169-3.2-ethercat.c
r8169-3.2-orig.c
r8169-3.4-ethercat.c
r8169-3.4-orig.c
r8169-3.6-ethercat.c
r8169-3.6-orig.c
r8169-3.8-ethercat.c
r8169-3.8-orig.c
r8169-4.4-ethercat.c
r8169-4.4-orig.c
Obviously, this doesn't play well with the random configuration
testing done by utils/genrandconfig. This commit avoids this issue by
making sure we never build any of those drivers as part of the
genrandconfig generated configurations.
Fixes:
http://autobuild.buildroot.net/results/07b7475d780c067d99ee5618a5fd2bb024a5b4e7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current version 1.5.2 dates back from 2013, so it is extremely
old. The latest master branch of igh-ethercat contains numerous fixes,
including fixes to ensure that it builds with recent Linux kernel
releases. Backporting the individual patches fixing those issues on a
9 year old release would be too much effort, so we propose to simply
bump the version to the latest available in the Git master branch.
Fixes:
http://autobuild.buildroot.net/results/4dc9b71c805a8156bcf8f398edd3a30f2b6ac6da/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SDL v1.2 was discovered to contain a use-after-free via the XFree function
at /src/video/x11/SDL_x11yuv.c.
https://github.com/advisories/GHSA-wr7h-5wm3-p3h4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
