- Same version as NXP release 5.15.52_2.1.0
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39
- No official changelog but the main addition is the support of skipped
h.264 frames
- Add patch to fix kernel version test from the package
- Yocto doesn't need that workaround as it installs the kernel headers
- This is needed for NXP 5.15+ kernels (using DMABUF)
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch which was applied upstream:
be887135b8
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a maintained fork instead of the abandoned dicttoxml.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
DROPBEAR_DSS is now disabled by default. Enable only when
BR2_PACKAGE_DROPBEAR_LEGACY_CRYPTO is enabled.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If BR2_PER_PACKAGE_DIRECTORIES is enabled and Buildroot is using
HOST_MAKE for a Kconfig package. The $(1)_KCONFIG_RULES does not work
correctly, and kconfig-package-regen-dot-config will always run the
'oldconfig' target.
This is because $(1)_KCONFIG_RULES expands before the first recipe line
of .stamp_dotconfig. $(1)_KCONFIG_RULES attempts to call $(HOST_MAKE),
which requires that the per-package/<pkg>/host directory has been setup.
But that directory is not setup until a later recipe line. This results
in $(1)_KCONFIG_RULES silently failing, and so always configuring with
'oldconfig'.
Fix the issue by calling the command as part of the recipe, so
$(HOST_MAKE) will be ready in time. As the comment on $(1)_KCONFIG_RULES
describes, we should not use backticks. Use an intermediary file to
store the output of the command, so that backticks are not needed.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch adds an option that allows to install the u-boot.elf file
produced when CONFIG_REMAKE_ELF=y in the U-Boot configuration.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump ATF to boundary-lf-5.15.52-2.1.0.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- U-Boot branch boundary-v2022.04 from Boundary repo.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Based on NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- i.MX Hantro V4L2 Daemon. Provides the vsidaemon, which is needed for
V4L2 nodes to work.
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an INSTALL_STAGING_CMDS define as libraries needed by
imx-vpu-hantro-daemon.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Highligts include support for MbedTLS and a serious memory leak fix to
the GnuTLS backend.
Changes:
- Add support for MbedTLS
- Add support for per-provider interface to bind to
- Use HTTP-only for api.ipify.org, default (fallback) checkip service
Fixes:
- serious memory leak in GnuTLS backend
- ca-trust-file has no effect for GnuTLS
- handle easyDNS "no update required" as OK status
- use configured server:port, don't force port 443 for HTTPS
(From https://github.com/troglobit/inadyn/releases/tag/v2.10.0)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If a custom os_prefix directory is specified then the Raspberry Pi
firmware probes for the README file in overlays directory. If
this is not found then firmware will use the top-level overlays
directory which can be confusing if os_prefix is used in conjunction
with other filters to implement alternate boot behaviour.
In Raspberry Pi OS the README file is always included to ensure
that the relevant documentation is in sync with the overlays. Rather
that including the entire file let's just include an empty file so
that overlays directory is consistent with the Raspberry Pi OS
APT package.
From
https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix
Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared
with the main OS (i.e. os_prefix is ignored).
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable aarch64 support for rpi-userland to provide
vcmailbox and vcgencmd in 64bit builds. The are useful
for programming OTP and system debug.
The ARM64=ON parameter restricts the make targets
to only include those supported on 64-bit i.e. it
excludes the legacy Broadcom EGL drivers.
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SSCEP is a client-only implementation of the SCEP (Cisco System's Simple
Certificate Enrollment Protocol).
The goal of SCEP is to support the secure issuance of certificates to
network devices in a scalable manner, using existing technology whenever
possible. The protocol supports the following operations:
* CA and RA public key distribution
* Certificate enrollment
* Certificate and CRL query
Certificate and CRL access can be achieved by using the LDAP protocol,
or by using the query messages defined in SCEP.
CC: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- Fix use of $DAEMON, found by check-package
- Expects DAEMON to be name of daemon controlled by script, this
causes ripple efects in rest of script
- Recommend `chmod a-x`, .mk file installs with `-m 0755`
- Fix shellcheck warnings:
- Use "$VAR" in case of spaces in filenames
- recommend not using $? in if stmt, should use `if start-stop ...`
- mismatch in indentation in case-esac
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As stated in [1] this and future release will only be hosted on
freedesktop's gitlab.
Archives hosted on gitlab are missing the gpg signature.
1: 49bb905131
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[yann.morin.1998@free.fr: fix spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Z3, also known as the Z3 Theorem Prover, is a cross-platform
satisfiability modulo theories (SMT) solver.
https://github.com/Z3Prover/z3
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- python bindings 'depends on' python, not 'select' it
- fix check-package in test_z3.py
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This adds a separate opencv4_contrib package to manage
downloading/unpacking that repository. These extra modules
are useful for a lot of applications, but not necessary
for minimal installs, so they are all given dedicated Kconfig
options
It's important to note that the opencv4-contrib package
downloads extra source that is compiled as a part of
the opencv4 package. This is why it is a dependency
of opencv4, and not the other way around
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
commit e37c110 ("package/gnuradio: bump version to 3.10.4.0")
included two numbered patches. Those are generating
"make check-package" warnings.
Fixes:
make check-package
package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch:4: generate your patches with 'git format-patch -N'
package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch:4: generate your patches with 'git format-patch -N'
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a header only library which is required by the latest version
of zxing-cpp.
Include paths and pc file are based off of debian libstb package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Current python-automat version 20.2.0 no longer work with Python 3.11
updated in commit 738500c296.
Running package runtime test with command:
support/testing/run-tests \
-d dl \
-o output_folder \
tests.package.test_python_automat.TestPythonPy3Automat
Fails with output:
Traceback (most recent call last):
File "/root/sample_python_automat.py", line 27, in <module>
led.turn_on()
^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/automat/_methodical.py", line 232, in __get__
File "/usr/lib/python3.11/site-packages/automat/_introspection.py", line 43, in decorator
File "/usr/lib/python3.11/site-packages/automat/_introspection.py", line 35, in copyfunction
File "/usr/lib/python3.11/site-packages/automat/_introspection.py", line 23, in copycode
TypeError: code() argument 13 must be str, not int
This commit fixes this issue by updating the package to the latest
version.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replaced patches with upstream patch which fixes both problems.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for new optional bluez5-backend-native-mm and readline
config options.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
