Commit Graph

1054 Commits

Author SHA1 Message Date
Shyam Saini
d1cd9cdf26 configs/nenopi_neo4: new defconfig
This initial support includes:
        Linux v5.2
        Custom U-Boot
        Arm Trusted Firmware v2.0
        Buildroot default packages

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
 - Use the kernel headers from the kernel, by using
   BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y
 - Use the final 5.2 kernel instead of rc1.
 - Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-03 07:46:36 +02:00
Guo Ren
6e359e26e3 configs/csky_gx6605s: bump kernel to 5.0 and use buildroot toolchain
The most important change is to use the toolchain compiled by
buildroot itself. We also bump kernel to 5.0 with kernel.org.

Gx6605s' PHYS_OFFSET if 0x10000000 and we make qemu and gx6605s the
same to ease maintaince. This PHYS_OFFSET is also OK for 610 qemu.

In this patch we add gx6605s.dts in board/csky, because linux-5.0
doesn't contain gx6605s.dts in its tree.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-02 23:42:51 +02:00
Guo Ren
2834df2b4b configs/qemu_cskyXXX_virt: new defconfig
Add C-SKY defconfig for QEMU virt machine.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-02 23:42:51 +02:00
Ludovic Desroches
285d306a58 board/atmel: genimage: remove display variant dtbs
Display variant dtbs are no longer part of the linux-at91 tree.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-08-01 20:23:25 +02:00
Joel Stanley
a8fac3fcfc board: Add PowerPC mac99
PowerPC kernel developers were after a userspace for testing 32-bit
powerpc kernels. This machine both suits that requirement and has
support in qemu. It's also a fairly common piece of 32-bit ppc hardware.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
[Peter: lock kernel/headers to 5.2.4]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-08-01 17:54:47 +02:00
Pierre-Jean Texier
340df670fa configs/warp7: Bump kernel and U-Boot versions
Bump U-Boot to 2019.07 and kernel to version 5.1.16.

Also
 - adjust the U-Boot binary name after DM conversion.
 - add missing notes about DFU

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-07-14 11:57:39 +02:00
Joris Offouga
f97d69b2ac board/freescale: Fix wrong config for u-boot.img
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-07-10 22:18:46 +02:00
Joris Offouga
be65c8f5c4 configs/imx7dpico: Bump U-Boot to 2019.07 and kernel to version 5.1.16.
Also
 - adjust the U-Boot binary name after DM conversion.
 - add missing notes about flashing U-Boot and SPL

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-07-09 20:04:58 +02:00
Joris Offouga
4f9f3a0e96 board/freescale: Introduce UBOOTBIN in spl genimage templates
For boards like imx7d-pico, u-boot.img changes to u-boot-dtb.img in
U-Boot v2019.07. Therefore, we need to pick u-boot.img or u-boot-dtb.img
depending on the board configuration.

Just like was done in commit 52344e556f for the generic genimage
template, replace the U-Boot file name with UBOOTBIN, which is set
according to the BR2_TARGET_UBOOT_FORMAT_* option. We also need to set
the correct value for this variable for the u-boot.img and
u-boot-dtb.img cases.

While we're at it, rename the partition from 'u-boot-img' to 'u-boot',
to stay consistent with the generic genimage template.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
[Arnout: correct u-boot.img condition, rework commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-07-09 20:04:52 +02:00
Yann E. MORIN
626c9705d2 board/qemu: ensure root is available before mounting it
On my machine, it happens once in a while that the virtualised machine
boots too fast for the rootfs to be available at the time the kernel
tries to mount it.

For example, board/qemu/arm-vexpress/readme.txt suggested changing
"-smp 1" up to "-smp 4". But doing so here causes a kernel panic:

    VFS: Cannot open root device "mmcblk0" or unknown-block(0,0): error -6
    Please append a correct "root=" boot option; here are the available partitions:
    1f00          131072 mtdblock0
     (driver?)
    1f01           32768 mtdblock1
     (driver?)
    Kernel panic - not syncing: VFS: Unable to mount root fs on
    unknown-block(0,0)

So, add the oh-so-useful 'rootwait' option to all kernel command lines
for qemu defconfigs.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-06-25 22:55:58 +02:00
Oleksandr Zhadan
42a172bb0e configs/arcturus_ucp1020: bump Linux and U-Boot
Bump Linux and U-Boot versions.

The Linux configuration file and patches are no longer needed.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
[Thomas: also use a tarball for U-Boot.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-06-23 17:26:55 +02:00
Alistair Francis
f999379795 configs/qemu_riscv32_virt: update to 5.1 kernel
Update the 32-bit defconfig to use the latest kernel. This requires a
patch to revert a ABI to ensure that the glibc port continues to work.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-06-20 15:56:19 +02:00
Baruch Siach
0de91e5725 configs/solidrun_clearfog_gt_8k: new defconfig
Add support for the SolidRun Armada 8040 based Clearfog GT-8K. This
board has the same processor as the Macchiatobin, so we can reuse the
Macchiatobin U-Boot and image definitions.

The kernel fragment enables drivers that are necessary to make
networking ports work (SFP, Ethernet port, and Ethernet switch).

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-06-19 13:59:21 +02:00
Gilles Talis
bb7065fbf9 configs/freescale_imx8mmevk: new defconfig
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-06-17 21:22:47 +02:00
Bartosz Bilas
9b35241663 configs/bananapro: bump Linux to 5.1.1
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-06-17 20:34:23 +02:00
Joris Offouga
095420e05a configs/imx7dpico: Add Wifi support
imx7dpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-06-10 23:45:19 +02:00
Joris Offouga
40c5aa50cf configs/imx7dpico: Bump Linux and U-Boot
Bump Linux to 5.1 and U-Boot to version 2019.01.

U-Boot patch is no longer needed, applied upstream.

U-Boot defconfig name for this board has changed to pico-pi-imx7d.

U-Boot now supports distrobootcmd for this board, so add the appropriate
extlinux.conf and use SPL+u-boot.img instead of u-boot.imx. Note that
the common freescale post-image script handles things appropriately
based on the selected options in .config.

dosfstools and mtools are no longer needed to build the image.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Arnout: remove BR2_PACKAGE_HOST_DOSFSTOOLS and BR2_PACKAGE_HOST_MTOOLS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-06-10 23:43:40 +02:00
Joris Offouga
cc1761790f boards/freescale/common: Introduce genimage.cfg.template_no_boot_part_spl
Modern U-Boot assumes a layout where the first partition is an ext2 and
the kernel and dtb can be found in /boot. In other words, a layout
without boot partition.

Add a genimage.cfg template for the freescale defconfigs with such a
layout.

For now, only the layout with SPL+u-boot.img is added. It's unlikely that
the u-boot.imx approach will be used.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-06-10 23:36:37 +02:00
Julien Olivain
19ba3c56f5 configs/imx8mmpico: new defconfig
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-06-10 20:29:01 +02:00
Julien Olivain
92ac758c40 board/freescale/common/imx: add support for i.MX8MM
For the boot image creation for the i.MX8MM, the main differences with
i.MX8M are that there is no HDMI firmware image passed, and the ATF
load address is different.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-06-10 20:22:38 +02:00
Peter Seiderer
dff08793ee board/pandaboard: replace utf-8 graphic sympols by ascii characters
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-05-18 23:34:43 +02:00
Peter Seiderer
12c0d4288b board/csky: replace utf-8 graphic sympols by ascii characters
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-05-18 23:34:36 +02:00
Peter Seiderer
03f41a853f board/beaglebone: replace utf-8 graphic sympols by ascii characters
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-05-18 23:34:30 +02:00
Peter Seiderer
61c8fcbc82 board/beagleboardx15: replace utf-8 graphic sympols by ascii characters
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-05-18 23:34:22 +02:00
Peter Seiderer
516e118e36 board/armadeus: replace utf-8 graphic sympols by ascii characters
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-05-18 23:34:18 +02:00
Bartosz Bilas
15ff8e4979 board/lemaker/bananapro/linux-wifi.fragment: add rfkill driver into kernel by default
This fixes following error:

	# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
	Successfully initialized wpa_supplicant
	rfkill: Cannot open RFKILL control device

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-05-18 23:33:20 +02:00
Thomas Petazzoni
79b8540d62 board/pc: drop unused grub-efi.cfg file
Following commit fee29b05bb
("configs/pc_x86_64_efi: use a GPT partition table"),
board/pc/grub-efi.cfg is no longer used anywhere: the
post-image-efi-gpt.sh script generates the grub configuration.

Also, since post-image-efi-gpt.sh generates a grub configuration file
that uses the root filesystem partition UUID as the root= kernel
argument, the instructions in the readme.txt file to tweak root= from
/dev/sda2 to /dev/vda2 is no longer relevant. This was noted in the
commit log of fee29b05bb:

    The root filesystem location is passed to the kernel by a partition
    UUID, so it is possible to boot on QEMU, directly from the disk image,
    or dump the image to a physical device.

Fixes: #11841
Cc: Pete Morici <pmorici@dev295.com>
Cc: Carlos A. M. dos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-05-10 10:30:15 +02:00
Peter Korsgaard
d7d82a318b config: add defconfig for orangepi-r1
Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a
2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided
through a Realtek RTL8189FTV (no mainline driver, not supported).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-05-05 21:12:04 +02:00
Pierre-Jean Texier
489a48fe63 configs/atmel_sama5d27_som1: bump to linux4sam_6.0
This commit :
	- bumps Linux & U-Boot to linux4sam_6.0.
	- bumps at91bootstrap to v3.8.12.
	- removes old in-tree dts (now in dt-overlay-at91 [1][2])
	- adapts genimage accordingly.

[1] https://github.com/linux4sam/dt-overlay-at91/tree/master/sama5d27_som1_ek
[2] http://www.at91.com/linux4sam/bin/view/Linux4SAM/DT-Overlay

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-05-01 09:04:20 +02:00
Shyam Saini
b0bae3bcc8 configs/amarula_vyasa_rk3288: adjust U-Boot config to boot larger kernel image
Default value of CONFIG_SYS_BOOTM_LEN in u-boot causes board reset for
large uImage files, so add u-boot patch to increase the maximum kernel
image size.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-04-21 12:18:00 +02:00
Matt Weber
4a12ea24ae board/freescale: single T1xxx/2xxx readme.txt
The readme.txt would contain similar content for either processor
family, so this patch consolidates the usage and adds the new
T2080 notes.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-04-17 22:46:57 +02:00
Nylon Chen
5bf75e1864 configs/andes_ae3xx: new defconfig
Add Andes 32-bit defconfig for AE3XX platform.

Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
 - fix commit title to match the defconfig name
 - use the external toolchain package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-04-17 09:20:55 +02:00
Shyam Saini
7dfcd850b9 configs/asus_tinker_rk3288: adjust U-Boot config to boot larger kernel image
Default value of CONFIG_SYS_BOOTM_LEN in u-boot causes board reset for
large uImage files, so add u-boot patch to increase the maximum kernel
image size.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-04-15 21:37:43 +02:00
Matt Flax
51d6d6c580 Fix rasberry Pi 64bit firmware overlay inclusion
This patch enables the inclusion of the Pi's overlays. Previously
the overlays were not included in the genimage configuration.
This patch ensures overlays are included in the sdcard (when
enabled) by defaulting to the inclusion of an empty
output/images/rpi-firmware/overlays directory in genimage cfg.

The Pi's overlays are built with the following config
variables:
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS=y
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="Image"
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image modules dtbs"

After building, the dtbo files are present in the
output/images/rpi-firmware/overlays directory but not added
to the sdcard because they are missing from the genimage cfg
file.

Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: fix indentation, and add comment explaining why an empty
         directory is created.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-04-14 00:09:56 +02:00
Shyam Saini
d8ba5343e6 configs/nanopi_m1_plus: bump to linux 5.0 and u-boot 2019.01
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01. The
kernel patch is no longer needed, as the Device Tree for the platform
is now upstream.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-04-10 13:39:56 +02:00
Michel Stempin
4dcb76b013 configs/licheepi_zero: new defconfig
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-28 18:05:45 +01:00
Alistair Francis
013d544212 configs/qemu_riscv*_virt: use OpenSBI by default
Use OpenSBI by default instead of riscv-pk (BBL).

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-26 14:59:55 +01:00
Alistair Francis
4359e877d3 board/qemu/riscv32-virt: simplify the linux config
Reduce the config fragment to the bare minimum to enable 32-bit
support. This means we are as close as possible to the arch
defconfig.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-26 13:26:36 +01:00
Alistair Francis
6939ea5c5d board/qemu/riscv32-virt: convert Linux defconfig into a fragment
Convert the config to the arch defconfig plus a fragment. When this
fragment is applied we will generate the same config as we previously
did.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-26 13:26:01 +01:00
Julien Olivain
367adaf091 configs/imx8mpico: new defconfig
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-17 17:35:17 +01:00
Francois Perrad
b8637d1a27 configs/olimex_a20_olinuxino_lime_legacy: remove defconfig
The old 3.4 Linux kernel used by this defconfig doesn't build with gcc
7.x.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-15 23:13:41 +01:00
Julien Olivain
332421c683 board/freescale/common/imx: fix imx8-bootloader-prepare for i.MX8M
The update of imx-mkimage in commit
c14d92d439

broke the imx8-bootloader-prepare.sh script for i.MX8M, used in
freescale_imx8mqevk_defconfig

The updated mkimage_fit_atf.sh script in imx-mkimage now needs
a ATF_LOAD_ADDR variable, which was set to 0x00910000 for i.MX8M.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-07 23:17:28 +01:00
Peter Korsgaard
da49312af9 Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-03-05 10:59:38 +01:00
André Hentschel
fdc21cddc3 configs/freescale_imx8qxpmek: new defconfig
Signed-off-by: André Hentschel <andre.hentschel@zf.com>
[Thomas: update DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-02-23 16:30:36 +01:00
André Hentschel
7aaf176aea board/freescale/common/imx: add support for i.MX8X
Signed-off-by: André Hentschel <andre.hentschel@zf.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-02-23 16:23:08 +01:00
Thomas Petazzoni
6327a8f0d6 configs/zynq_zybo: remove defconfig
This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.

On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/165766194

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-02-22 22:19:19 +01:00
Gerome Burlats
fd8a02fd75 configs/qemu: Update defconfigs to Linux 4.19.16
Linux version are changed to 4.19.16 (LTS) for all qemu defconfigs,
except for riscv. riscv defconfigs are left unchanged because they have
a custom Linux repository causing more difficulties when upgrading to
4.19 for riscv32. And for the riscv64, it has been updated recently to
Linux 4.20 by another contributor.

Patch for arm-versatile-nommu is changed into a git format

Add cache attributes for xtensa-lx60-nommu config because the commit
7bb516ca54
added a new config variable for memory cache attribute:
CONFIG_MEMMAP_CACHEATTR

All these updated configs have been built successfully.

Signed-off-by: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-02-13 08:41:29 +01:00
Grégoire Delattre
9f1256e1aa board/pc: fix typo in board/pc/post-build.sh
Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-02-12 20:01:39 +01:00
Carlos Santos
2a3ec5dc2f configs/pc: fix grub-efi.cfg permissions
It does not need the execute bits.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-02-07 22:43:44 +01:00
Michał Łyszczek
97babe5c8b configs/rock64: new defconfig
Configuration contains:
  - building tpl, spl and u-boot (forked u-boot repository)
  - booting from SD card and network via PXE
  - working ethernet, usb and uart
  - minimal rootfs with busybox
  - ready to flash SD card image

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-02-06 21:56:38 +01:00
Carlos Santos
fee29b05bb configs/pc_x86_64_efi: use a GPT partition table
Since all EFI-based systems support GPT, this commit changes
pc_x86_64_efi to use a GPT partition table. It shows an example of how
to craft a disk image with GPT partitioning instead of MBR. This is
achieved by means of a post-image script which uses
mkdosfs+mcopy+sfdisk, since genimage is unable to deal with GPT. Long
term, it would be ideal if genimage had GPT support, but until then,
this script shows how to achieve creating a GPT-based disk image.

The script was kept as simple as possible to make it easy to understand
and adapt for other purposes.

The root filesystem location is passed to the kernel by a partition
UUID, so it is possible to boot on QEMU, directly from the disk image,
or dump the image to a physical device.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-02-06 17:40:28 +01:00
Gerome Burlats
0203df36ac qemu/aarch64-virt: Emulate cortex-a53 in qemu to match Buildroot config
qemu_aarch64_virt_defconfig (implicitly) specifies cortex-a53, so adjust the
QEMU command line to also emulate a a53 instead of a57.

Also adjust the defconfig to explicitly specify a53 for consistency/clarity.

Signed-off-by: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-01-27 22:38:45 +01:00
Gwenhael Goavec-Merou
ba9b3399c1 configs/qemu_riscv64_virt_defconfig: bump Linux version
Since riscv64 works with linux default defconfig, this patch drop custom config.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Tested-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-01-22 14:46:33 +01:00
Mark Corbin
22322383a7 configs/qemu_riscv32_virt: new defconfig
Add RISC-V 32-bit defconfig for QEMU virt machine.

Tested with QEMU 2.12.1

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: regenerate .gitlab-ci.yml, update DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-01-06 14:30:11 +01:00
Baruch Siach
9727ea9978 configs/clearfog: update U-Boot and kernel
Bump U-Boot and kernel to their latest releases.

Remove the documented limitations. Recent kernels added support for the
SOM SPI flash, and the carrier SFP port.

Mention the 'dd' command in the warning text. No script is involved.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-01-03 22:46:29 +01:00
Grégoire Delattre
0b28397a9b board/pc: ensure grub.cfg is copied to target filesystem
Before this commit, the grub configuration file was copied to the
TARGET_DIR in a post-image hook, after the filesystem has been
generated. It was kinda working because the board/pc's grub
configuration and the default one are the same and the later was
copied during the build process of the grub2 package.

This commit ensures the custom board/pc grub configuration is copied at
the right time.

Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-31 18:45:53 +01:00
David Lechner
f816a35b18 configs/lego_ev3: update to Linux kernel 4.19 and U-Boot 2018.11
This updates LEGO MINDSTORMS EV3 to Linux kernel 4.19 and U-Boot
2018.11. This kernel brings Bluetooth support, so some Bluez packages
are also added. Also, we now have proper device tree support, so a few
things are rearranged in the flash and SD card images since the DTB is
no longer appended to the kernel image.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-28 11:50:11 +01:00
David Lechner
b2e5014af5 board/lego/ev3: fix max U-Boot flash size
The first stage bootloader on LEGO MINDSTORMS EV3 only loads the first
256K of the flash memory (this is hard-coded in an EEPROM). So, the
second stage bootloader (U-Boot) cannot exceed this size.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-28 11:48:34 +01:00
André Hentschel
f2c1e2e885 board/freescale/common/imx: fix typo
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-27 17:09:59 +01:00
André Hentschel
92daeae960 board/freescale/imx8mqevk: fix typos in readme
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-27 17:09:54 +01:00
Fabio Estevam
98524e573c configs/freescale_imx7dsabresd: Apply upstream U-Boot fix
NXP U-Boot tree has the following build issue:

  MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx7dsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
make[2]: *** [u-boot-dtb.imx] Error 1
Makefile:877: recipe for target 'u-boot-dtb.imx' failed

This issue has been fixed by commit  f916757300c1  ("imx: Create
distinct pre-processed mkimage config files"), so backport this
commit to the NXP U-Boot tree in order to fix the build error.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/136980027

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-12-21 14:58:35 +01:00
Julien Olivain
31f5c8561f configs/csky_gx6605s: bump gcc to 6.3.0, kernel to 4.9.56
This patch updates the csky custom external toolchain to fix a broken
host dependency of gdb on libexpat.so.0 (most hosts now ship
libexpat.so.1). gdb is required to copy and and boot the kernel (see
board/csky/readme.txt). The updated gdb no longer has this host
dependency, which solves the issue.

Since this external toolchain was built and tested with csky kernel
4.9.56, this patch also updates to that kernel version.

Finally, this 4.9.56 csky kernel changed its default bootargs. So we
add a patch to preserve the same behavior as the previous version.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-16 21:24:44 +01:00
Jagan Teki
2dd62b6d6e configs/orangepi_lite2: add WiFi support
Orangepi lite2 board has AP6356S WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6356S chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-16 15:56:53 +01:00
Jagan Teki
753052090f configs/orangepi_lite2: new defconfig
Add initial support for Orangepi Lite2 board with below features:

- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-16 15:56:17 +01:00
Jagan Teki
209f98154f configs/orangepi_one_plus: new defconfig
Add initial support for Orangepi One Plus board with below features:

- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-16 15:54:40 +01:00
Ezequiel Garcia
aacf3acb84 ci20: Fix U-Boot build with codesourcery toolchain
Currently, U-Boot is failing to build, due to some issues
with the toolchain and the U-Boot port.

Fix it.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-12-15 11:15:34 +01:00
Peter Korsgaard
13c43455a0 Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-12-02 08:16:10 +01:00
Erico Nunes
9fb2a48959 configs/aarch64_efi_defconfig: new defconfig
New generic defconfig for aarch64, to run on aarch64 servers compliant
with EFI firmware and ACPI.

This can also be tested with qemu, and is useful so that we have an
arm defconfig with grub enabled. Tested with qemu 2.11.2 and AAVMF,
the aarch64 virtual machine UEFI firmware.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas: extend readme.txt with more details]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-26 21:11:08 +01:00
Peter Korsgaard
aabd7f6ad0 orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
ondemand cpufreq govenor so the frequency is dynamically adjusted - So
enable it in linux-extra.config.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-23 10:48:03 +01:00
Peter Korsgaard
91887cf778 orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
driver for the sy8106a regulator used on the board or enable the ondemand
cpufreq govenor so the frequency is dynamically adjusted - So enable these in
linux.fragment.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-23 10:48:00 +01:00
Thomas Petazzoni
c79f5a8876 board/pc: use frame pointer unwinder in linux.config
The default ORC unwinder requires libelf to be built. While we could
build libelf using BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF, we probably
don't really need the ORC unwinder in the PC defconfigs, so let's use
the frame pointer unwinder instead.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/123771107

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-23 10:43:24 +01:00
Fabio Estevam
1ad9c45a05 configs/imx6sabre: Create distinct pre-processed mkimage config files
Commit 0c4bccf9e8 ("configs/imxsabre: Fix U-Boot parallel build issue")
tried to fix the parallel build issue, but the real fix was developed
later by Trent Piepho later, so add such commit to fix Buildroot
build failures on rel_imx_4.9.x_1.0.0_ga NXP branch.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771053
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771054
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771055

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-23 10:42:42 +01:00
Baruch Siach
2ffdcbe0a5 board: macchiatobin: update readme.txt
Update the kernel and U-Boot versions to the actual versions in use.
Update the description of supported hardware features.

Add a note that the stale SPI flash environment issue only affects the
vendor BSP.

Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-11-22 17:40:33 +01:00
Baruch Siach
a5689ca365 configs/solidrun_macchiatobin_mainline: bump kernel and U-Boot
Bump U-Boot to version 2018.11. This version supports autodetection of
SD/eMMC boot source, so we can now enable environment load from SD card.
Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save
device. This avoids stale environment values from the SPI flash. That in
turn, allows to use the more convenient distro boot which is enabled in
the default environment.

Bump kernel to version 4.19.2. This version enables
CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from
the kernel kconfig fragment. Enable support for SFP modules detection
and configuration. Leave the PHY drivers for now to keep them built into
the kernel. The kernel defconfig builds these drivers as modules. But
that does not work as expected in the default configuration.

Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-11-22 17:38:35 +01:00
Jagan Teki
5e01e9442d configs/amarula_a64_relic: add WiFi support
Amarula A64-Relic board has AP6330 WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6330 chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-01 14:21:32 +01:00
Jagan Teki
acdad6d742 configs/amarula_a64_relic: new defconfig
Add initial support for Amarula A64-Relic board
with below features:
- U-Boot 2018.07
- Linux 4.17.0-rc6
- Default packages from buildroot

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y and
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-01 14:21:32 +01:00
Francois Beerten
4f56655b2b board/zynqmp/post-image.sh: support dots in DTS file names
Some ZynqMP device trees in the kernel have a dot in their name,
for example "zynqmp-zcu102-rev1.0". The post image script
left out the part after the dot and created an invalid symlink.

Signed-off-by: Francois Beerten <fbeerten.git@colabti.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-10-26 20:54:00 +02:00
Pierre CROKAERT
26034b8663 configs/odroidxu4: new defconfig
This patch provides support for the board Odroid XU4. It uses a recent
4.14 kernel released by Hardkernel, and the current u-boot 2017.05
also from Hardkernel.

Signed-off-by: Pierre CROKAERT <pct@crookies.net>
[Thomas:
 - Update DEVELOPERS file
 - Update .gitlab-ci.yml file
 - Simplify the boot.ini script
 - Add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14 option
 - Add BR2_PACKAGE_HOST_DOSFSTOOLS and BR2_PACKAGE_HOST_MTOOLS since a
   VFAT filesystem is generated
 - Keep the default root filesystem size, since it is sufficient.
 - Reduce the size of the VFAT filesystem]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-10-21 11:00:04 +02:00
Lothar Felten
a0f0b54013 configs/bananapi_m2_ultra: new defconfig
Add intial support for Bananapi M2 Ultra board based on the Allwinner
R40 SoC.

- U-Boot 2018.07
- Linux 4.18.12

Board specifications: http://www.banana-pi.org/m2u.html

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-10-14 10:10:36 +02:00
Mark Corbin
52ef63d0bd configs/qemu_riscv64_virt: new defconfig
Add RISC-V 64-bit defconfig for QEMU virt machine.

Tested with QEMU 2.12.1

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-09-25 21:40:10 +02:00
Francois Perrad
d756c736a9 configs/olimex_a20_olinuxino_lime_mali: rename to olimex_a20_olinuxino_lime_legacy
This commit renames olimex_a20_olinuxino_lime_mali to
olimex_a20_olinuxino_lime_legacy, because the upstream Linux kernel
now also supports using the Mali GPU.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-09-18 21:00:02 +02:00
Evgeniy Didin
9c6ab08cc9 board/synopsys/hsdk: remove duplicate console
This patch removes duplicate messages in Linux log on HSDK board.
For HSDK board we setup bootargs via device tree,
see https://elixir.bootlin.com/linux/latest/source/arch/arc/boot/dts/hsdk.dts#L25
"console=ttyS3" was mistakenly placed in u-boot bootargs which are
appended to Kernel bootargs in case of using buildin .dtb.

Before patch log is like:
------------------------8<-------------------------------------
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,...
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,...
mmc0: new SDHC card at address 59b4
mmc0: new SDHC card at address 59b4
blk_queue_max_segment_size: set to minimum 8192
blk_queue_max_segment_size: set to minimum 8192
------------------------>8-------------------------------------

After patch log is like:
------------------------8<-------------------------------------
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,...
mmc0: new SDHC card at address 59b4
blk_queue_max_segment_size: set to minimum 8192
------------------------8<-------------------------------------

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-09-10 22:55:55 +02:00
Nikolay Dimitrov
11f869a066 board: resurrect support for RIoTboard
Resurrect support for RIoTboard after 2018.02.x deprecation.

Signed-off-by: Nikolay Dimitrov <nikolay.dimitrov@retrohub.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-09-10 21:57:33 +02:00
Gary Bisson
f57d68a229 board/freescale/imx8mqevk: remove hardware support section from readme
At first the support for i.MX8MQ processors was minimal, hence this
section in the readme file.

Since then, GPU support was added [1] in master and VPU in next [2].

So drop this section as it is confusing people and no one maintains it.

[1] https://git.buildroot.net/buildroot/commit/?id=84afda9c
[2] https://git.buildroot.net/buildroot/commit/?id=82732071

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-08-29 21:13:34 +02:00
Peter Korsgaard
1ee626aab9 sheevaplug: add a basic readme
Describing how to update the board.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-08-17 16:51:10 +02:00
Thomas Petazzoni
f1bdb63ff4 board/technologic/ts7680: fix bogus size in genimage.cfg
512B is not a correct size to express "512 bytes", and causes a
genimage failure:

  ERROR: Invalid size suffix 'B' in '512B'

To express "512 bytes", using just "512" is sufficient. With this
commit, genimage works fine, and we indeed have a 512 bytes unused
partition:

$ fdisk -l output/images/sdcard.img
Disk output/images/sdcard.img: 60 MiB, 62915584 bytes, 122882 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000

Device                    Boot Start    End Sectors  Size Id Type
output/images/sdcard.img1          1      1       1  512B  0 Empty
output/images/sdcard.img2          2 524289  524288  256M 83 Linux

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/88314963

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-08-12 16:29:15 +02:00
Romain Naour
23aee3eac4 configs/qemu_sh4eb-r2d: restore the old sh-sci driver behaviour
As for sh4-r2d (little-endian) restore the old sh-sci driver behaviour
for sh4eb-r2d.

Tested with qemu_sh4eb_r2d_defconfig.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-08-05 14:46:29 +02:00
Romain Naour
f7a887c368 configs/qemu_sh4-r2d: restore the old sh-sci driver behaviour
This reverts commit 18e8cf159177100e69d528293f8cf6875c0b1bca (kernel)

The last Qemu kernel update [1] introduced a regresion in sh4 SCIF
serial device. Some keyboard presses are very slow to be taken into
account, perhaps not even taken into account at all. This would
explain why our test infrastructure doesn’t manage to login as root
[2][3][4].

git bisect reported a kernel patch from 4.11, increasing RX FIFO
trigger defaults value for sh-sci (H)SCIF. The kernel patch itself
looks good but the Qemu emulation is not ready to handle this new
setting.

>From Qemu (2.12.0): target/sh4/README.sh4
"Configuration of the second serial port (SCIF) is supported. FIFO
handling infrastructure has been started but is not completed yet."

We can't use the first serial port (ttySC0) because it's the second
SH UART that's emulated by Qemu.

In order to be able to test sh4 architecture with newer kernel,
revert to the old behaviour.

[1] 03fb00f217
[2] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006425
[3] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006427
[4] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006426

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-08-05 14:46:21 +02:00
Luca Ceresoli
822c34c301 uboot: zynqmp: allow to use custom psu_init files
U-Boot SPL configures pinmuxes, clocks and other low-level devices. On
the Xilinx ZynqMP SoCs the code to do this resides in a file called
psu_init_gpl.c which is initially generated by the Xilinx development
tools. Add an option to pass these files from the outside (e.g. in the
board files).

For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig using
BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_DIR. If it were in boot/uboot/ to be
applied unconditionally, it would break the build for configs using a
U-Boot version where the patch is already applied.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add comment about U-Boot version requirements to use this
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-28 19:27:38 +02:00
Luca Ceresoli
86eecc4606 configs/zynqmp_zcu106_defconfig: add Xilinx ZCU106 board (ZynqMP SoC)
This adds support the Xilinx ZCU106 development board.

[Tested on the ES2 (Engineering Sample 2) version of the board]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-28 19:18:31 +02:00
Luca Ceresoli
e865a1f03c uboot: zynqmp: generate SPL image with PMUFW binary
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a
recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the
boot.bin file together with U-Boot SPL, and the boot ROM will load
both.

For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig that wishes to use
BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied
unconditionally, it would break the build for configs using a U-Boot
version higher than 2018.7-rc1 where the patch is already applied.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas:
 - indicate that this feature requires U-Boot 2018.07, since commit
   c7df098a71e05dc81cee818747759e8060b59626 is needed.
 - define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a
   variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU
   firmware]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-28 16:32:07 +02:00
Gary Bisson
bdc2246149 board/boundarydevices: add i.MX8MQ support to u-boot scripts
- Update RAM address
- Update kernel image name for ARM64
- Update U-Boot boot command for ARM64
- Remove obsolete cmd_xxx_present check
- Remove obsolete wlan.mac parameter
- Add cmd_mipi command for MIPI-DSI interface

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-19 15:43:26 +02:00
Gary Bisson
3d34f36806 board/boundarydevices: add i.MX8MQ support to post-build.sh
- Use proper ARCH for mkimage command
- Use different U-Boot binary name depending on ARCH

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-19 15:42:55 +02:00
Gary Bisson
c1f914fd43 board/boundarydevices: remove obsolete u-boot scripts
6x_bootscript/6x_upgrade have been deprecated for more than a year.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-19 15:42:40 +02:00
Gary Bisson
3ef69d8245 board/boundarydevices/common/post-build.sh: fix U-Boot naming
The upgrade.cmd script expects the binary to be named
u-boot.<uboot_defconfig>.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-19 15:42:30 +02:00
Gary Bisson
a534676dc3 board/freescale/common/imx: make imx8-bootloader-prepare more generic
Allow user to override the hardcoded dtb name by using
BR2_ROOTFS_POST_SCRIPT_ARGS.

The only user of this script, configs/freescale_imx8mqevk, is updated
accordingly.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-19 15:41:24 +02:00
Fabio Estevam
52344e556f imx/post-image: Allow flashing u-boot-dtb.imx in the SD card
Add support for flashing the u-boot-dtb.imx binary in the SD card
when a target selects BR2_TARGET_UBOOT_FORMAT_DTB_IMX.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-18 11:47:06 +02:00
Pierre-Louis Bossart
02b7fbf8fc board/minnowboard: add CONFIG_IGB in Linux kernel config
The 2017 MinnowBoard Turbot skews no longer use the Realtek 8169
Ethernet chip.  The Turbot D0 uses The Intel I211, the Turbot Dual
Ethernet has an I210 (quad-core) or I211 (dual-core).

Add CONFIG_IGB to the Linux config but keep the Realtek 8169 support
to avoid breaking older boards

Tested on Turbot D0, lspci -k shows the igb driver is used:
03:00.0 Class 0200: 8086:1539 igb

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-07-14 22:03:06 +02:00
Leon Anavi
a1a152684e configs/olimex_a10_olinuxino_lime_defconfig: new board
Add a defconfig for the Olimex A10-OLinuXino-LIME, reusing most
of the A20-OLinuXino-Lime and A13-OLinuXino files (sym links).

The configurations for Olimex A10-OLinuXino-LIME feature:
- U-Boot 2018.03
- Mainline Linux kernel 4.14.26

Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
[Arnout: remove commented-out BR2_ARM_EABIHF=y (which is default)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-07-10 22:59:22 +02:00
J. Tang
722c11ce7b board/raspberrypi: update firmware option to use 64-bit mode
As per latest Raspberry Pi firmware documentation, the option
'arm_control' has been deprecated in favor of 'arm_64bit'.

Fixes https://bugs.busybox.net/show_bug.cgi?id=11111.

Signed-off-by: Jason Tang <tang@jtang.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-06-30 22:07:01 +02:00
Baruch Siach
d9d47b20b5 configs/solidrun_clearfog: bump kernel and bootloader
Update the kernel version to 4.17.2.

Update U-Boot version to 2018.05.

Migrate to U-Boot generic distro configuration which is easier than the
hand written boot script.

Improve the 'dd' command example in readme.txt.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-06-25 21:14:15 +02:00
Evgeniy Didin
2cdfa6c849 synopsys/axs10x: Update /etc/inittab by post-build
To not maintain custom copy of inittab file lets adopt approach
used in raspberrypi adding post-build script for synopsys/axs10x
boards.

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-19 13:52:12 +02:00
Carlos Santos
a3df894e83 board/synopsys: synchronize custom inittab with BusyBox' one
Apply modifications made in recent commits:

- 456ea9871e busybox: add /dev/std{in, out, err} symlinks to inittab
- 13dbe73782 busybox: reduce number of mkdir calls in inittab
- 8a89d290d4 busybox: add an inittab entry to activate swap

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-12 14:56:17 +02:00
Jan Kraval
c7a445a58f configs/orangepi_lite: Enable HDMI and analog audio in Linux config
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-11 21:41:32 +02:00
Peter Korsgaard
a961005990 orangepi_pc_defconfig: bump linux to 4.17, u-boot to 2018.05
4.17 brings support for HDMI out, but sunxi_defconfig hasn't been updated to
enable the drivers - So add a kernel fragment to enable them.

Likewise, analog audio has been supported since 4.10, but the driver isn't
enabled in sunxi_defconfig, so enable it in the fragment.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-11 21:40:33 +02:00
Fabio Estevam
0233e7ded1 configs/imx7dpico: Bump kernel and U-Boot
Bump kernel to version 4.17 and U-Boot to 2018.05.

As the dtb file has been renamed in mainline, make the necessary
adjustments in U-Boot environment and also in
BR2_LINUX_KERNEL_INTREE_DTS_NAME.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-08 21:25:18 +02:00
Fabio Estevam
fd77f8d7f6 configs/imx6ulpico: Bump kernel and U-Boot
Bump kernel to version 4.17 and U-Boot to 2018.05.

As the imx_v6_v7_defconfig in 4.17 already selects the
CONFIG_CFG80211_WEXT option, the linux.fragment can
be simply removed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-08 21:24:58 +02:00
Jagan Teki
0bfeef6222 configs/orangepi_zero_plus2: bump linux to v4.16
Bump linux as well headers to v4.16 version, this eventually drop the
wifi patch since it has been merged to Linux v4.16.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-06-05 18:47:56 +02:00
Waldemar Brodkorb
03fb00f217 qemu: update defconfigs to Linux 4.16.7
All linux configs are renamed to a version neutral filename
to avoid further renaming on kernel bumps.

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.16.7   2.12.0           YES     OK
arm_versatile           4.16.7   2.12.0           YES     OK
arm_versatile_nommu     4.16.7   2.12.0           YES     OK (3)
arm_vexpress            4.16.7   2.12.0           YES     OK
m68k_mcf5208            4.16.7   2.12.0           YES     OK
m68k_q800               4.16.7   q800-v2.11.0     NO (2)  OK
microblazebe            4.16.7   2.12.0           YES     OK
microblazeel            4.16.7   2.12.0           YES     OK
mips32r2el_malta        4.16.7   2.12.0           YES     OK
mips32r2_malta          4.16.7   2.12.0           YES     OK
mips32r6el_malta        4.16.7   2.12.0           YES     OK
mips32r6_malta          4.16.7   2.12.0           YES     OK
mips64el_malta          4.16.7   2.12.0           YES     OK
mips64_malta            4.16.7   2.12.0           YES     OK
mips64r6el_malta        4.16.7   2.12.0           YES     OK
mips64r6_malta          4.16.7   2.12.0           YES     OK
nios2-10m50             4.16.7   2.12.0           NO      OK
or1k                    4.16.7   2.12.0           NO      OK
ppc_g3beige             4.16.7   2.12.0           YES     OK
ppc_mpc8544ds           4.16.7   2.12.0           YES     OK
ppc_virtex_ml507        4.16.7   2.12.0           NO      OK
ppc64_pseries           4.16.7   2.12.0           YES     OK
ppc64le_pseries         4.16.7   2.12.0           YES     OK
ppc64_e5500             4.16.7   2.12.0           YES     OK
sh4                     4.16.7   2.12.0           YES     OK
sh4eb                   4.16.7   2.12.0           NO (1)  OK
sparc_ss10              4.16.7   2.12.0           YES     OK
sparc64_sun4u           4.16.7   2.12.0           YES     OK
x86                     4.16.7   2.12.0           YES     OK
x86_64                  4.16.7   2.12.0           YES     OK
xtensa_lx60             4.16.7   2.12.0           YES     OK
xtensa_lx60_nommu       4.16.7   2.12.0           YES     OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel patch required, switched to devicetree usage

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-06-02 22:23:39 +02:00
Peter Korsgaard
8b0fd3cb49 Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-02 11:21:20 +02:00
Jagan Teki
82d882eef0 board: amarula: vyasa: Give raw space for falcon mode
RK3288 Vyasa board support falcon mode in U-Boot and SD layout start from
16MB offset for args and 17MB for uImage. So give full u-boot partition
space as 30M so-that it can occupy bigger uImage file and doesn't overlap
rootfs partition.

[Peter: use # as comment character, clarify comment wording]
Reported-by: Shyam Saini <shyam@amarulasolutions.com>
Tested-by: Shyam Saini <shyam@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shyam saini <shyam@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-05-27 22:05:35 +02:00
Martin Bark
fbb45f6d7f configs/raspberrypi3_64_defconfig: add support for rpi3b+
The kernel now includes the rpi3b+ device tree for aarch64

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-05-20 12:32:08 +02:00
Evgeniy Didin
89d9ca945c configs/snps_arc*_defconfig: update u-boot version
With this commit we update u-boot version to 2018.05 for
Synopsys boards. U-boot version 2018.05 was released recently
and includes significant changes for ARC boards:
 * Fix for compile-time warning for AXS10x
 * Add support of platform-specific commands for HSDK
 * Add support for on-board SPI flash on HSDK

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-05-19 22:44:21 +02:00
Fabio Estevam
e797818582 imx8mqevk: readme: Write the SoC name in capital letters
Use "i.MX8MQ" (in capital letters) for the SoC name for better
readability.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-05-17 22:21:23 +02:00
Fabio Estevam
7b5c6b2464 imx8mqevk: readme: Put switch configuration for SD card boot
Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-05-17 22:21:19 +02:00
Fabio Estevam
ed947dce16 configs/freescale_imx31_3stack: Remove target
Currently this target fails to build:

arch/arm/mach-imx/built-in.o: In function `init_mmdc_lpddr2_settings':
platform-spi_imx.c:(.text+0x8f18): undefined reference to `imx6sll_lpddr2_freq_change'
arch/arm/mach-imx/built-in.o: In function `imx6ul_cpuidle_init':
platform-spi_imx.c:(.init.text+0x195c): undefined reference to `mx6ull_lpm_wfi_end'
platform-spi_imx.c:(.init.text+0x1960): undefined reference to `mx6ull_lpm_wfi_start'
platform-spi_imx.c:(.init.text+0x1964): undefined reference to `imx6ull_low_power_idle'
arch/arm/mach-imx/built-in.o: In function `imx6sl_init_late':
platform-spi_imx.c:(.init.text+0x56f0): undefined reference to `imx6sll_cpuidle_init'
Makefile:969: recipe for target 'vmlinux' failed

NXP 4.9 kernel does not properly support mx31, so better remove this target.

mx31_3stack board is currently supported in U-Boot and kernel mainline,
so if someone is interested on this board, then a target can be introduced
later which uses these mainline components.

Currently I do not have access to this board, so remove it its defconfig
for now.

Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561688
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-05-06 08:59:45 +02:00
Thomas Petazzoni
373dac0423 configs/gdb_bfin_bf512: remove defconfig
As we are about to remove the Blackfin architecture, remove the only
defconfig that was using this CPU architecture.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-15 22:03:20 +02:00
Erik Larsson
84f15dc00e configs/freescale_imx8mqevk: new defconfig
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-12 22:48:40 +02:00
Erik Larsson
7f50b000e7 board/freescale/common/imx: add i.MX8 genimage template
This commit adds a genimage template file that is used for i.MX8
platforms in the common i.MX post-image script.

Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-12 22:39:43 +02:00
Erik Larsson
4a1ad1d135 board/freescale/common/imx: add imx8-bootloader-prepare script
This commit adds an imx8-bootloader-prepare.sh script that will be
used by i.MX8 platforms to prepare their bootloader image.

Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-12 22:38:50 +02:00
Erik Larsson
4755bf2bd4 board/freescale/common/imx: make post-image.sh arm64 compatible
This commit makes the common post-image.sh script used by Freescale
platforms compatible with arm64:

 - Support having DTBs in sub-folders

 - Support a kernel image in the 'Image' format

Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-12 22:28:25 +02:00
Prasanthi Chellakumar
b7c885ea3f atmel: add support for at91sam9g20ek to flasher.sh
Adds support for the at91sam9g20-ek board to the flasher.sh script.

Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-07 09:05:32 +02:00
Joshua Henderson
3f76d07548 board/atmel: add flasher.sh support for at91sam9260ek
Add support to the flasher.sh script for the at91sam9260-ek board which
complements the existing at91sam9260eknf_defconfig.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-07 09:04:58 +02:00
Martin Bark
012c400f9d board/raspberrypi: add support for rpi3 b+
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-06 21:49:18 +02:00
Joshua Henderson
e1452fe843 board/atmel: use correct sam-ba binary in flasher.sh script
Instead of using the install of sam-ba under host/opt directly, use the symlink
created in host/bin.  The side effect of doing this instead allows the correct
sam-ba binary to be used based on the host arch being 32 bit or 64 bit.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-06 21:34:16 +02:00
Evgeniy Didin
439826eecc Synopsys: Cleanup files related to Synopsys
Add missing entries in DEVELOPERS file for synopsys boards.
Add missing readme.txt for recently introduced synopsys/hsdk board.
Reduce size of FAT partition for HSDK image.

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-04-03 22:49:18 +02:00
Matt Weber
dcf5fafe84 qemu_ppc64_e5500_defconfig: convert quotes in readme.txt emulation example
Resolves an error in the way the bootlin toolchain-builder uses
the board/qemu/ppc64-e5500/readme.txt to generate the qemu test
command.

https://github.com/free-electrons/toolchains-builder/blob/master/build.sh#L186

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-04-03 12:51:35 +02:00
Lothar Felten
23df65e10e configs: beaglebone: bump kernel and uboot version
Switch to Linux kernel version 4.9.59 from the TI SDK 04.02.00.09
(TI SDK release date: 23.12.2017)
Updated uboot to version 2018.01
uEnv.txt corrected to boot from sd card on the ti-am335x-evm

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-02 17:23:36 +02:00
Matt Weber
dab038d1ac configs/qemu_ppc64_e5500: new defconfig
Adding basic support modeled after the Freescale/NXP T1040RDBD4 board.

This target is used to support testing of the bootlin e5500 toolchain.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-04-02 00:42:59 +02:00
Jan Kundrát
ee156ad480 New board: SolidRun ClearFog Base
My goal was to rely on upstreamed features as much as possible, which
means that some bits are only half-baked for now:

- Due to the DTS restructuring in upstream kernel, we require 4.11+. The
latest LTS or CIP kernels do not know about the -Base model.

- Linux has no generic support for SFP cages (yet). It seems that this
has hit the net-next tree in August 2017, but there's been no release
(it's probably targettting 4.14). Also, the merge only included the
required infrastructure; the mvneta driver conversion is not included.
Patches which finalize this exist in Russel King's tree and also in
random vendor trees.

- There's no access to the SPI flash in these versions of
uboot/linux/dts.

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
[Arnout:
 - rename to solidrun_clearfog_defconfig;
 - specify kernel headers version (default is now 4.15);
 - remove ext2 fs size override, the 4 extra MB are not needed;
 - U-Boot needs dtc and openssl;
 - add comments to defconfig;
 - update .gitlab-ci.yml;
 - mention in readme.txt that SFP support is missing;
 - add Jan to DEVELOPERS.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-04-01 12:52:27 +02:00
Evgeniy Didin
7f430a4e87 board: add support for ARC HS Development Kit (HSDK)
Synopsys DesignWare HSDK (which stands for ARC HS
Development Kit) is the latest and greatest development
platform that sports quad-core ARC HS38 in real silicon.

Most noticeable features of the board are:
 * Quad-core ARC HS38 CPU running at 1GHz
 * 4Gb of DDR
 * Built-in Vivante GPU (well supported via open source
   Etnaviv drivers)
 * Built-in Wi-Fi/Bluetooth module (RedPine RS-9113)

And as usual we have:
 * [micro] SD-card slot
 * 2 USB 2.0 ports
 * 1Gbit Ethernet port
 * Built-in Digilent JTAG probe
 * Serial port accessible via micro-USB port

Writing sdcard.img on SDcard creates two partitions:
 * FAT32 with uImage and uboot.env
 * EXT4 with root filesystem

We modify kernel config because in default hsdk kernel config
CONFIG_INITRAMFS_SOURCE parameter is set and when we build
rootfs separately (BR2_TARGET_ROOTFS_INITRAMFS is not set)
error appears. Also we set up CONFIG_ARC_UBOOT_SUPPORT which
enables usage of uboot variables in the boot process.

[Peter: Fix comments and rename defconfig to snps_archs38_hsdk_defconfig,
	Add defconfig to DEVELOPERS and fixup board/synopsys entry,
	Drop postimage script, rename env file in genimage.cfg and drop size
	setting for rootfs partition,
	Add "" for CONFIG_INITRAMFS_SOURCE in linux fragment]
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-31 16:04:39 +02:00
Yves Deweerdt
650818fb3a configs/raspberrypi0w_defconfig: new defconfig for Raspberry Pi Zero W
Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal
raspberrypi0_defconfig. However, then you don't have support for the
Bluetooth out-of-the-box, which makes using a W a bit pointless.

Therefore, create a separate defconfig for the W. It is a copy of
raspberrypi0_defconfig with the following changes:
 - Add DT overlays (from rpi-firmware) to support Bluetooth.
 - Pass --add-pi3-miniuart-bt-overlay to post-image.sh.

Since there is now a separate raspberrypi0w_defconfig, the W support
can be removed from raspberrypi0_defconfig.

Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com>
[Arnout:
 - Bump to same kernel version as raspberrypi0.
 - Remove redundant comment.
 - Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y.
 - Improve commit log.
 - Refresh .gitlab-ci.yml.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-03-31 12:31:32 +02:00
Oleksandr Zhadan
363505241f configs/arcturus_ucls1012a: new defconfig
The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc.
64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A
Low Power Communication Processor.  This 314 pin MXM3.0/SMARC module card
contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is
available with 1 or 2 Gig-Ethernet PHYs.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>

Changes v1 -> v2:
    - updated kernel and u-boot source repositories to github

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-03-26 22:38:16 +02:00
Fabio Estevam
0c4bccf9e8 configs/imxsabre: Fix U-Boot parallel build issue
Sometimes imximage throws the following error:

MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx6sxsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed

Later on, when running mkimage for the u-boot.imx it will succeed in
finding the IVT offset.

Looks like some race condition happening during parallel build when
processing mkimage for u-boot-dtb.imx and u-boot.imx.

A proper fix still needs to be implemented, but as a workaround let's
remove the error when the IVT offset is not found.

It is useful to have such message, especially during bring-up phase,
but the build error that it causes is severe, so better avoid the
build error for now.

The error checking can be re-implemented later when we have a proper
fix.

This workaround has already been applied in mainline U-Boot:
http://git.denx.de/?p=u-boot.git;a=commit;h=b5b0e4e351e20a606de22db6a56ad6bc1e2aa8fd

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/59015347

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-03-24 16:58:10 +01:00
Matt Weber
ad6ed6643a configs/freescale_t1040d4rdb_defconfig: new board
The T1 QoriQ from NXP has had a few varients of RDB dev boards.
This target is against the latest D4RDB version.  Any of the
other versions before D4RDB (plain RDB), may require backing off
the uboot version to SDK 1.6 and/or adjusting the kernel dtb used.

This board configuration provides an upstream kernel build which
has been verified to boot on target.

The target assumes the user still uses the NXP suggested prebuilts
in the SDK2.0 (last release for PowerPC). If a uboot rebuild is
required, the source for SDK2.0 can be found in the following repo.

http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-11 22:22:02 +01:00
Matt Weber
b98e541413 configs/freescale_p1025twr_defconfig: new board
Replacing the p1010rdb, this board is based on the tower development
system still available by NXP. The board is setup to track upstream
Linux and has been bumped from 4.1 to 4.15 (compared to p1010).

The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-11 22:19:39 +01:00
Vivien Didelot
9f17540b17 board/technologic/ts5x00: rename to ts5500
Rename the confusing and misleading ts5x00 directory to a real reference
platform name, ts5500. The readme.txt file already states the support
for both TS-5500 and TS-5400 platforms.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-11 09:48:07 +01:00
Vivien Didelot
6461d76992 board/technologic/ts5x00: bump kernel to 4.14
Bump the 3.17 kernel used for the Technologic Systems TS-5500 platform
to the latest LTS kernel 4.14.

This fixes the ts5x00_defconfig build with GCC 6.x.

The linux-3.17.config file has been renamed to linux-4.14.config to
match the new kernel version, and its changes are the result of make
linux-update-defconfig. However only comments are affected.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-11 09:47:21 +01:00
Thomas Petazzoni
f124c2f076 configs/riotboard: remove defconfig
This defconfig fails to build with gcc 6.x, even though we switched to
using gcc 6.x as the default gcc version in May 2017.

This defconfig also hasn't seen any non-mechanical update since
November 2015.

So it's time to get rid of it, in order to remove the following build
failure:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/55306938

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-09 22:54:59 +01:00
Thomas Petazzoni
13fb1c4912 configs/teliv_evk_pro3: remove defconfig
This defconfig fails to build with gcc 6.x, even though we switched to
using gcc 6.x as the default gcc version in May 2017.

It hasn't been updated since April 2017, and the original submitter,
Fabio Porcedda said:

  Unfortunately a newer kernel doesn't boot and I don't have the time
  to fix the issue. If having a defconfig that doesn't build on gcc
  6.x is unacceptable feel free to remove it.

So, let's get rid of this defconfig, which will remove the following
build error:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/55306952

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-07 22:37:51 +01:00
Thomas Petazzoni
5c5f1b0743 configs/qemu_x86_defconfig: remove kernel options that need openssl
Wireless support ends up enabling CONFIG_SYSTEM_TRUSTED_KEYRING, which
requires openssl to be available on the host, so disable wireless
support, which isn't needed in Qemu.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-06 15:25:35 +01:00
Thomas Petazzoni
248161d6fa configs/qemu_x86_64_defconfig: remove kernel options that need openssl/libelf
The ORC unwinder requires libelf to be available on the host, so use
the frame pointer unwinder instead. Using the frame pointer unwinder
is probably good enough in our default Qemu configurations.

Wireless support ends up enabling CONFIG_SYSTEM_TRUSTED_KEYRING, which
requires openssl to be available on the host, so disable wireless
support, which isn't needed in Qemu.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-06 15:25:15 +01:00
Matt Weber
9f13f8c237 freescale_p1010rdb_pa_defconfig: remove board
This defconfig currently doesn't build with GCC6 (Linux 4.1).
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306827

A maintainer w/board isn't available to make updates, so removing
this config.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-06 12:01:01 +01:00
Thomas Petazzoni
b0fd706c2f configs/firefly_rk3288: remove defconfig
The original submitter of this defconfig:

"""
Sorry, unfortunately we no longer have the firefly board,
so we can't maintain it.
"""

And this defconfig fails to build with gcc 6.x, causing breakage in
the defconfig testing.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/55306815
  https://gitlab.com/buildroot.org/buildroot/-/jobs/55306814

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-06 11:59:23 +01:00
Thomas Petazzoni
49d2638276 configs/ci40: remove defconfig
>From the original submitter of this defconfig:

"""
I no longer have access to ci40 board. It would be difficult for me to
maintain it.
"""

And this defconfig currently fails to build with gcc 6.x. Therefore,
drop it.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/55306806

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-06 11:58:57 +01:00
Alex Suykov
842138aaa5 chromebook snow: bump kernel to 4.15
No other changes necessary, 4.15 builds and boots fine.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-05 23:19:33 +01:00
Thomas Petazzoni
f08dd9f4cb configs/freescale_mpc8315erdb: remove defconfig
This defconfig currently fails to build the Linux kernel:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/55306826

In addition, the U-Boot build had already been removed in commit
12c01e4a05
("configs/freescale_mpc8315erdb: remove U-Boot build"), back in
October 2016, and nobody bothered fixing it.

This defconfig was originally contributed and maintained by Gustavo
Zacarias, but he is no longer active in Buildroot, and nobody
expressed interest in this defconfig, so let's get rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-05 21:30:30 +01:00
Peter Korsgaard
92b8bd0879 Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-05 21:04:14 +01:00
Thomas Petazzoni
11050d908d board/qemu/ppc64le-pseries: make Qemu command similar to ppc64-pseries
In particular:

 - Explicitly specify the CPU to be used, POWER8, which matches
   qemu_ppc64le_pseries_defconfig

 - Use hard disk emulation to access the root filesystem instead of an
   initrd.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-03 17:20:16 +01:00
Thomas Petazzoni
1b554aa849 board/qemu/ppc64le-pseries: put Qemu command on one line
This allows the toolchain building machinery used by
https://toolchains.bootlin.com to automatically re-use this Qemu
command line.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-03 17:19:25 +01:00
Thomas Petazzoni
62e8305358 board/qemu/ppc64le-pseries: use qemu-system-ppc64
qemu-system-ppc64le doesn't necessarily exist: it isn't installed by
Qemu, and only created as a symlink to qemu-system-ppc64 by some
distributions (Ubuntu). Other distributions (Fedora) just have
qemu-system-ppc64.

But qemu-system-ppc64 is capable of running little-endian PPC64
systems, so use this one instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-03 17:19:20 +01:00
Sergey Matyukevich
53ae154c77 configs/orange-pi-zero-plus2: enable WiFi support
Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:

- add DTS patch enabling AP6212 WiFi/BT combo support
  -- this patch is on its way to mainline Linux v4.16
- enable WiFi support in kernel config
- enable Broadcom brcmfmac kernel driver in kernel config
- add Broadcom wireless firmware package to image
- add basic wireless tools to image
- add mdev to image to enable module autoloading
- add rootfs overlay with proper NVRAM file for on-board AP6212 chip

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-02-14 22:04:25 +01:00
Sergey Matyukevich
5c5f274601 configs/orange-pi-zero-plus2: bump kernel and u-boot versions
Bump versions:
- use U-Boot 2008.01
- use Linux kernel v4.15.2

Drop patch with dts sdcard fix since it has been
merged to Linux v4.15.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-02-14 22:03:27 +01:00
Vincent Stehlé
fe563efcb1 configs/qemu_aarch64_virt_defconfig: bump kernel to 4.15.2
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-02-10 16:16:33 +01:00
Jagan Teki
98b68d08fa board: Add Tinker RK3288 board support
Add Tinker board, from rk3288 family SOC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-02-06 11:39:48 +01:00
Jagan Teki
cdbb96e0b1 board: Add Vyasa RK3288 board support
Add Vyasa board, from rk3288 family SOC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-02-06 11:39:48 +01:00
Adam Duskett
60f9c9f98b qemu_x86: use kernel 4.15
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-02-03 08:25:25 +01:00
Adam Duskett
a952d24b95 qemu_x86_64: use kernel 4.15
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-02-03 08:25:04 +01:00
Evgeniy Didin
f0c84ac9cf configs/snps_arc*_defconfig: update linux version
With this commit we update Linux kernel version to 4.15 and
Linux headers version to 4.15.
Also patches for arc vdk are removed because these
changes were applied in Linux 4.15.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-02-02 21:39:13 +01:00
Sergey Matyukevich
4b9f572668 macchiatobin: bump kernel and u-boot versions
Bump Linux to 4.15 and U-Boot to 2018.01. Remove networking dts patches
since they has landed in Linux 4.15. Update readme.txt: fix mainline BSP
versions and update boot selection for board rev 1.3.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-01-30 22:55:03 +01:00
Waldemar Brodkorb
2b232adfb0 bfin-bf512: update to latest kernel
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-01-22 22:25:56 +01:00
Peter Korsgaard
239a58a7c8 minnowboard-max: defconfigs: bump kernel to 4.14.13
Use CONFIG_UNWINDER_FRAME_POINTER as CONFIG_UNWINDER_ORC needs libelf.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-01-15 15:24:01 +01:00
Johannes Schmitz
523688ae5c board/ci20: create a SD card image
Add a genimage.cfg to create a working sdcard.img for the ci20
hardware.  We also need a uboot-env.txt to create the partition for
the uboot environment.

Update the board/ci20/readme.txt with the related information. Remove
the tftp netboot description from the readme as it is already to
complicated for a basic bootable example.

Signed-off-by: Johannes Schmitz <johannes.schmitz1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2018-01-12 22:43:19 +01:00
Sergey Matyukevich
a0eecad195 orangepi: drop custom post-build and post-image scripts
Currently in Orange Pi boards post-build script is used only to generate
U-Boot boot script and post-image script is used only to generate sdcard
image according to genimage configuration. However both those tasks can
now be handled by generic Buildroot tools:
- BR2_TARGET_UBOOT_BOOT_SCRIPT config options
- support/scripts/genimage.sh script

This patch drops custom scripts replacing them
by generic Buildroot tools.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2018-01-07 21:37:20 +01:00
Gary Bisson
505ae63b60 configs: nitrogen*: bump u-boot version to 2017.07
Also include new boot scripts to match standard distro uboot commands.

Our previous 6x_bootscript and 6x_upgrade used custom variables and
their naming don't make sense now that we target more than i.MX6 CPU.

Therefore those old scripts are marked as legacy and kept for now but
the goal is to deprecate and remove them later.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2018-01-07 15:48:56 +01:00
Gary Bisson
8d5d083ed6 configs: freescale_imx*: bump to version 4.9.x_1.0.0_ga
Also switch repository from old freescale site to codeaurora:
https://source.codeaurora.org/external/imx/

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2018-01-07 15:39:31 +01:00
Jagan Teki
4e3ac4749a board: Add Orangepi PC2 support
Add initial support for Orangepi PC2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:57:39 +01:00
Jagan Teki
dc21f8957d board: Add Orangepi Zero Plus2 support
Add initial support for Orangepi Zero Plus2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:56:19 +01:00
Jagan Teki
f093b478e1 board: Add Orangepi Prime support
Add initial support for Orangepi Prime
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:55:22 +01:00
Jagan Teki
10e76af159 board: Add Orangepi Win/Win Plus support
Add initial support for Orangepi Win/Win Plus
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:54:49 +01:00
Jagan Teki
d644b145ef board: Add Olimex A64-OLinuXino support
Add initial support for Olimex A64-OLinuXino
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: Tsvetan Usunov <usunov@olimex.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:52:28 +01:00
Jagan Teki
c7160a76c6 board: Add FriendlyARM Nanopi NEO2 support
Add initial support for FriendlyARM Nanopi NEO2 board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:51:39 +01:00
Jagan Teki
43b1dd944d board: Add FriendlyARM Nanopi A64 support
Add initial support for FriendlyARM Nanopi A64
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:46:23 +01:00
Jagan Teki
83d7a37be1 board: Add SoPine support
Add initial support for SoPine board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:43:17 +01:00
Jagan Teki
5baefdcf85 board: Add Pine64 support
Add initial support for Pine64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:39:24 +01:00
Jagan Teki
5b9ac80fef board: Add Bananapi M64 support
Add initial support for bananapi M64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 17:48:07 +01:00
Sergey Matyukevich
9ea3da06b2 configs/solidrun_macchiatobin: add new defconfigs
Add MacchiatoBin board by SolidRun. This board is based on Marvell
Armada 8040 SoC. Board support package includes the following
two options: mainline and vendor BSPs.

Mainline BSP:
- Marvell ATF v1.3-armada-17.10
- mainline U-Boot v2017.11
- mainline Linux kernel v4.14.4

Marvell BSP with more hardware support enabled:
- Marvell ATF v1.3-armada-17.10
- Marvell U-Boot based on v2017.03
- Marvell Linux kernel based v4.4.52

More details about this board are available on wiki:
- http://wiki.macchiatobin.net

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: misc tweaks in readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-12-15 09:28:47 +01:00
Peter Korsgaard
d54123d293 boards/zynq: use genimage to generate a bootable SD card image
[Run-time tested on ZedBoard, build-tested on the other boards]
[Peter: also add host-dosfstools / host-mtools to make vfat images]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-11 22:39:19 +01:00
Luca Ceresoli
6465e4d34a boards/zynq: rename the DTB to be loaded by U-Boot
We are about to introduce genimage support for the Zynq boards. For
all of them U-Boot loads the DTB from a file named "devicetree.dtb" so
we need to rename it on the SD card image.

We could use genimage itself to rename files while creating the
image. But this would require a different genimage.cfg for each board,
leading to duplicate code.

Instead let's create a "devicetree.dtb" symlink pointing to the dtb
listed in the configuration. Currently all the Zynq-based boards have
only one DTS configured, but if one had two or more of them, the
symlink would point to the first one.

[Peter: only create symlink if dtb option is available]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-11 22:35:12 +01:00
Jan Kraval
7cfafb2a6b board/orangepi: add support for orangepi-lite board
This board is quite similar to orangepi-one board. Instead of ethernet, it
has RTL8189FTV SDIO WiFi chip.

Board support package includes the following components:
 - mainline u-boot 2017.09
 - mainline kernel 4.13.11

Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-07 22:21:08 +01:00
Sergey Matyukevich
289c172068 board/orangepi: add support for orangepi-pc-plus board
This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek
RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot
and kernel. So it makes sense to create a separate entry
for this board in buildroot.

Board support package includes the following components:
 - mainline u-boot 2017.09
 - mainline kernel 4.13.11

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-12-03 23:22:30 +01:00
Thomas Petazzoni
1c8dda3e43 Merge branch 'next'
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.

A few conflicts had to be resolved:

 - In the DEVELOPERS file, because Fabrice Fontaine was added as a
   developer for libupnp in master, and for libupnp18 in
   next. Resolution is simple: add him for both.

 - linux/Config.in, because we updated the 4.13.x release used by
   default in master, while we moved to 4.14 in next. Resolution: use
   4.14.

 - package/libupnp/libupnp.hash: a hash for the license file was added
   in master, while the package was bumped into next. Resolution: keep
   the hash for the license file, and keep the hash for the newest
   version of libupnp.

 - package/linux-headers/Config.in.host: default version of the kernel
   headers for 4.13 was bumped to the latest 4.13.x in master, but was
   changed to 4.14 in next. Resolution: use 4.14.

 - package/samba4/: samba was bumped to 4.6.11 in master for security
   reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-12-01 21:56:44 +01:00
Waldemar Brodkorb
913c822e01 qemu-or1k: update to 4.14.x
Or1k support improved, f.e. musl can be tested inside qemu.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-30 11:37:41 +01:00
Thomas Petazzoni
c191e24c33 board/qemu/x86*: use quotes around -append Qemu option value
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-27 22:37:34 +01:00
Thomas Petazzoni
e4648f2888 board/qemu/ppc64-pseries: adjust Qemu command line
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-27 22:37:31 +01:00
Fabio Estevam
475fb214c5 configs/imx6ulevk: Add new defconfig
Add support for imx6ulevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-23 21:12:20 +01:00
Julien BOIBESSOT
f56422d7a0 configs/armadeus_apf28: bump kernel version to latest 4.9 LTS
As there is now a defconfig inside kernel sources for mxs platforms, use it.

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-23 20:58:58 +01:00
David Lechner
bd61874919 board/lego/ev3: update to 4.14 kernel and 2017.11 U-Boot
This updates the LEGO MINDSTORMS EV3 board to Linux kernel 4.14 and
U-Boot 2017.11.

* Kernel patches are dropped because they are in mainline now.
* This caused the kernel image to be >3M so some adjustments to the image
  sizes/layout needed to be made in U-Boot.
* Updated U-Boot version bumped since we are touching this config anyway

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-22 21:47:48 +01:00
Fabio Estevam
459e3320dc configs/imx6sx-sdb: Add new defconfig
Add support for imx6sx-sdb_defconfig that allows booting a mainline
kernel and mainline U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-22 21:37:54 +01:00
Fabio Estevam
f86d5e1cf6 configs/imx6slevk: Add new defconfig
Add support for imx6slevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-22 21:37:28 +01:00
Jagan Teki
b4245aef53 board: bananapi-m1: Fix to use dtb instead of dts
boot.cmd using dts file instead of dtb which was
added in below commit, so fix the same.

"board: Add Bananapi M1 support"
(sha1: 5f50fb8d1d)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-18 21:03:04 +01:00
Joshua Henderson
eb7e90bf68 configs/at91: refactor to use genimage.sh
Prefer the commom genimage.sh instead of a custom post-image.sh script.

Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-11 23:29:23 +01:00
Joshua Henderson
9957d2c89d configs/atmel: refactor to use genimage.sh
Prefer the commom genimage.sh instead of a custom post-image.sh script.

Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-11-11 23:29:06 +01:00
Erico Nunes
dd37663161 board/pc: add documentation for testing with qemu
Add some documentation about running the pc defconfigs in qemu.
In particular, document the use of the -bios parameter to use the OVMF
firmware to test the UEFI image.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-22 16:29:07 +02:00
Erico Nunes
6fab243237 configs/pc: refactor to use genimage and grub.cfg
This simplifies the pc configs and respective post image scripts to use
the shared genimage script and separate grub config files.
Separate grub files are cleaner to maintain and easier to copy and
modify, for example to support booting the pc defconfigs in qemu.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-22 16:27:53 +02:00
Jagan Teki
5f50fb8d1d board: Add Bananapi M1 support
Add initial support for bananapi M1 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot

Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-21 22:37:28 +02:00
Gaël PORTAY
d0b055239e raspberrypi: post-image.sh fix gpu_mem option
The gpu_mem option is not using the proper option argument which causes sed to
fail.

	+ case "${arg}" in
	+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
	+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
	sed: -e expression #1, char 8: extra characters after command
	+ case "${arg}" in
	+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
	+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
	sed: -e expression #1, char 8: extra characters after command

The issue comes from the use of $1 instead of $arg to extract the gpu_mem
value. $1 is the $(BINARIES_DIR) which leads to a sed expression error.

Also, it adds the error flag to the shell script to prevent from such situation
and terminate the build in error.

Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-21 21:37:10 +02:00
Fabio Estevam
7bc38e794b configs/mx6udoo: Bump kernel and U-Boot versions
Bump the kernel to version 4.13.5 and U-Boot to 2017.09.

While at it, remove the custom scripts for generating the SD card image
and use the standard scripts instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-15 15:54:04 +02:00
Peter Korsgaard
c74a484fd1 configs/qemu_aarch64_virt_defconfig: build and use ext4 rootfs
The "virt" machine supports disk emulation, so use a ext4 rootfs instead of
initramfs for consistency with the other qemu defconfigs.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-12 22:49:21 +02:00
Peter Korsgaard
8eeb0564f8 configs/qemu_aarch64_virt_defconfig: bump kernel to 4.13.6
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-12 22:49:19 +02:00
Fabio Estevam
444afad615 configs/imx6-sabresd: Add VPU decoding support
Mainline kernel is able to decode video via the coda driver.

Add support for it and also add some explanation on how VPU decoding
can be tested with Gstreamer.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-10 22:43:04 +02:00
Fabio Estevam
dd20bbdaaf configs/imx6-sabreauto: Add a new defconfig
Introduce imx6-sabreauto_defconfig that uses mainline U-Boot and
mainline kernel.

As mainline U-Boot supports SPL, it is possible to boot the same
sdcard.img in the three mx6sabreauto variants: imx6q, imx6dl and imx6qp.

Also update the readme.txt file to explain how to build an image for
mx6sabreauto boards using mainline U-Boot and kernel.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: regenerate gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-08 15:54:43 +02:00
Fabio Estevam
f99636a044 imx6-sabresd: Improve the explanation of the fragment file
Improve the explanation of the need for using the performance governor.

This problem is specific to mx6sabresd board and the Egalax touchscreen
running a mainline kernel, so make this clear.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-08 15:31:09 +02:00
Arnout Vandecappelle (Essensium/Mind)
f934856638 boarde: icorem6: clarify the common vs. board-specific things in readme.txt
The parts of the readme.txt that specify the board-specific aspects
(DTB files, KMS config json file) were a bit confusing. For the DTB
files this is solved by putting the board it applies to after the DTB
file name. For the json files, this is solved by adding an extra line,
so the CinematicExperience-demo is clearly separated from the setting
of QT_QPA_EGLFS_KMS_CONFIG.

Also remove the 'for all boards' line in the beginning, it doesn't add
any value.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-10-06 22:14:07 +02:00
Jagan Teki
02408a54c7 board: icorem6: Add Qt5 configs for 1280x480 LVDS display
i.CoreM6 OF C.TOUCH 12 Kit has 1280x480 LVDS display, this patch adds
relevant qt5 configs with supports opensource Etnaviv graphical stack.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-10-06 22:12:17 +02:00
Jagan Teki
7a4eedfcf3 engicam: icorem6: Add OF C.TOUCH 12 Kit
This patch add support for Open Frame C.TOUCH 12 Kit.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-10-06 22:12:03 +02:00
Jagan Teki
a7940cf1a0 board: icorem6: Add Qt5 configs for 1280x800 LVDS display
i.CoreM6 OF C.TOUCH 10.1 Kit has 1280x800 LVDS display, this patch adds
relevant qt5 configs with supports opensource Etnaviv graphical stack.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-10-06 22:11:19 +02:00
Jagan Teki
b0026bd5ac engicam: icorem6: Add OF C.TOUCH 10.1 Kit
This patch add support for Open Frame C.TOUCH 10.1 Kit.

Since the defconfig is no longer only for the starter kit, remove that
from BR2_TARGET_GENERIC_ISSUE.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-10-06 22:10:35 +02:00
Jagan Teki
c5813f2b79 board: icorem6: Add Qt5 configs for 800x480 LVDS display
i.CoreM6 Starter Kit has 800x480 LVDS display, this patch adds
relevant qt5 configs with supports opensource Etnaviv graphical stack.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout: mention the qt5 defconfig in readme.txt, otherwise the demo
 applications don't exist]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-10-06 22:08:10 +02:00
Nicolas Ferre
95cb1465f0 configs/atmel: addition of the sama5d27 som1 ek board
Add the new SAMA5D27 SOM1 Evaluation Kit with linux4sam_5.7 components.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-10-06 12:34:32 +02:00
Gaël PORTAY
f9ccd2a186 raspberrypi: post-image.sh add new gpu_mem option
The amount of GPU memory can be set using the new option --gpu_mem_XXX
(where XXX is the total amount of memory available on the board).

Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-27 22:08:03 +02:00
Erik Stromdahl
39576d0f73 board/raspberrypi/post-image.sh: add multi arg support
Add possibility to supply multiple arguments to
post-image.sh

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
[Arnout: indent esac, suggested by Gaël PORTAY]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-27 22:08:03 +02:00
Fabio Estevam
fceb81781e imx6-sabresd/readme: Add an entry for glmark benchmark
Add an entry to explain how to run the glmark benchmark.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-27 00:33:15 +02:00
Fabio Estevam
e2945559a8 configs/imx6-sabresd_qt5: Bump kernel to 4.13.3
Bump the kernel version to 4.13.3.

Kernel 4.13.3 uses the /dev/dri/card0 device as rendering node, so
adjust it accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-27 00:32:35 +02:00
Fabio Estevam
b15dd57f50 configs/imx6q-sabresd_qt5: Switch to SPL
U-Boot 2017.09 uses SPL, so bump to this version so that we can
have a single qt5 image that supports the different imx6 sabresd
boards: imx6q, imx6dl and imx6qp.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-27 00:31:56 +02:00
Fabio Estevam
d5935bf70d configs/imx6q-sabresd: Drop the 'quad' notation
Now that SPL is supported a single image can run on the different
variants of imx6 sabresd boards: imx6q, imx6dl and imx6qp.

So drop the 'quad' prefix from defconfig, directory and readme file
to make it generic.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-27 00:26:50 +02:00
Fabio Estevam
82c1445fc4 wandboard: genimage: Pass an offset for the rootfs
Pass an offset of 1MB for the start of the rootfs.

Otherwise we get rootfs corruption when the bootloader is manually
written to the SD card.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-26 23:52:15 +02:00
Joel Stanley
9d5b5b7bfb configs: Add qemu_ppc64le_pseries
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.

The default architecture is set to Power8 as this was the first fully
enabled LE machine.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-26 23:50:14 +02:00
Fabio Estevam
8e2b8e1b42 imx: Introduce an SPL genimage template
Introduce a genimage template for booting SPL + u-boot.img U-Boot
binaries.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-09-24 17:04:24 +02:00
Peter Korsgaard
9fcb309472 configs/qemu_arm_versatile: bump kernel to 4.13.3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-09-22 23:12:31 +02:00
Mike Harmony
cef57c9642 Added support for Sinovoip BananaPi M2 Plus board.
[Peter: board is from Sinovoip, not Lemaker, move board files,
	Use kernel headers from kernel, explicitly use 4.13.3,
	drop eth0 dhcp config, cleanup post-build args,
	disable tar output format, use u-boot custom format,
	add host-dosfstools/mtools for genimage, drop unused
	host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-09-22 23:11:01 +02:00
Fabio Estevam
f396d1310b configs/imx7dpico: Bump to 4.13 kernel
Bump to 4.13 kernel and remove all the dts patches as they
are part of upstream now.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-09-07 21:59:14 +02:00
Nicholas Sielicki
3b7d75748b configs/galileo: add CONFIG_LBDAF=y in the kernel configuration
Kernel help-text states, "The ext4 filesystem requires that this feature
be enabled <...> otherwise, it will refuse to mount in the read-write
mode any filesystems that use the huge_file feature, which is enabled by
default by mke2fs.ext4."

If the rootfs is to be (re)mounted rw at boot, this must be set for the
system to successfully come up.

Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-09-02 20:14:14 +02:00
Thomas Petazzoni
29ace1e216 Merge branch 'next' 2017-09-02 15:10:48 +02:00
Julien Grossholtz
9a56487c63 configs: add defconfig for TS-7680
The TS-7680 is an i.MX286 ARM ARM926EJ-S board with 10/100 Ethernet,
USB port, eMMC and CAN ports.

The TS-7680 uses a 3.14.28 Linux kernel provided by Technologic Systems:
https://github.com/embeddedarm/linux-3.14.28-imx28

U-Boot is not provided as the manufacturer recommends not to update the
built-in bootloader.

For more informations please see:
https://wiki.embeddedarm.com/wiki/TS-7680

Signed-off-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com>
[Thomas: use same headers as the kernel being built, update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-24 23:15:26 +02:00
Julien BOIBESSOT
7fc336b28a board: remove Armadeus's APF9328 support
i.MX1/L boards require an old Linux kernel version to run, which is not
compatible with latest Buildroot needs.
Will fix:
https://gitlab.com/buildroot.org/buildroot/-/jobs/27873568

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: update .gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-21 23:23:16 +02:00
Gary Bisson
d257a25c9c board/boundarydevices: add mac parameter for BD-SDMAC in bootscript
Our new WiFi 802.11ac BT4.1 module (BD-SDMAC [1]) driver allows to
override the wlan MAC address using a module parameter.

Since its driver is now included in our external repository [2], update
the bootscript so it sets the parameter for that driver too.

As a FYI, $wlmac is based on Ethernet MAC address located in fuses.

[1] https://boundarydevices.com/product/bd_sdmac_wifi/
[2] https://github.com/boundarydevices/buildroot-external-boundary

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-19 15:18:32 +02:00
Vanessa Maegima
384ba85777 configs: Add support for imx7dpico board
Add support for imx7d-pico, which is a board based on NXP
i.MX7D processor.

For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
[Thomas:
 - add upstream references for the Linux kernel patches
 - fix typoes in readme.txt
 - remove audio-related packages in defconfig
 - regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-14 22:59:26 +02:00
Lothar Felten
f121eeb645 board/beaglebone: skip bonegreen.dtb if not built
The beaglebone_qt5_defconfig uses an older kernel version which does not
provide a device tree for the beagle bone green.
post-image.sh now selects genimage_linux41.cfg if am335x-bonegreen.dtb is
not build and genimage.cfg otherwise.

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-11 22:36:39 +02:00
Fabio Estevam
a8480e3b2a imx6q-sabresd: Add a qt5 defconfig variant
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.

This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.

Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
 - Add Fabio to DEVELOPERS
 - Rename linux config fragment to linux_qt5.fragment
 - Add comment to linux_qt5.fragment why it is needed
 - Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
 - Reorder defconfig entries to they match imx6q-sabresd_defconfig
 - Remove strace and host-uboot-tools, neither seems to be needed
 - Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
 - Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
 - Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-08-03 00:16:41 +02:00
Michał Łyszczek
f82bd2c9df configs/socrates_cyclone5: new defconfig
Configuration contains:
  - building uboot (and spl) from altera's github
  - booting from SD card
  - working ethernet, serial, i2c, fpga_manager
  - minimal rootfs with busybox
  - ready to flash SD card image

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[Thomas:
 - add entry to DEVELOPERS file
 - refresh .gitlab-ci.yml
 - fix commit title]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-02 21:45:26 +02:00
Philippe Reynes
fed07953de configs/armadeus_apf27: bump to kernel 4.12.4
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/23508534

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-31 19:35:19 +02:00
Fabio Estevam
e4ceb3e078 configs/warp7: Bump U-Boot and kernel versions
Bump U-Boot to 2017.07 and kernel to version 4.12.3.

As imx_v6_v7_defconfig in 4.12 selects CONFIG_CFG80211_WEXT=y,
remove the linux.fragment file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-25 20:44:27 +02:00
Chakra Divi
b0a9ee07e4 board: Add support for nanopi-m1-plus
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
    nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot

Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-07-23 11:30:14 +02:00
Peter Korsgaard
d4afb3288b minnowboard_max: bump to kernel 4.12.2
And drop the version number from the linux configuration.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-16 09:59:15 +02:00
Jörg Krause
ea8aec0c26 configs/bananapro: bump Linux kernel to 4.12.1
Drop the board specific patches which has been applied upstream.

[Peter: also drop now unused BR2_GLOBAL_PATCH_DIR]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-07-15 17:34:25 +02:00
Oleksandr G Zhadan
0aa8612dc4 board/arcturus/ppc-ucp1020: add patch to fix build with gcc 6.x.
This commit adds a Linux kernel patch to solve a build failure with
the arcturus_ucp1020_defconfig with gcc 6.x:

arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
        offsetof(struct thread_fp_state, fpr[32][0]));
                        ^

The patch is upstream in Linux, and can be dropped when
arcturus_ucp1020_defconfig is updated to use a new Linux kernel
version.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-15 10:14:59 +02:00
Peter Korsgaard
80dacdaa47 configs: nexbox_a95x_defconfig: bump to kernel 4.12
Main difference is that the drm driver now supports the hdmi output.

The gxl variant device tree has been renamed in:

commit 7eea67101b9713ae438955e8899b3c4b078419f9
Author: Kevin Hilman <khilman@baylibre.com>
Date:   Fri Jan 20 07:57:52 2017 -0800

    ARM64: dts: meson-gxl: rename Nexbox A95x for consistency

    Since the GXL family has S905X and S905D SoCs, we're keeping the SoC
    name in the DTS filename for clarity.  Rename this file accordingly to
    be consistent with the rest of the GXL DTS files.

    Cc: Neil Armstrong <narmstrong@baylibre.com>
    Reviewed-by: Andreas Färber <afaerber@suse.de>
    Signed-off-by: Kevin Hilman <khilman@baylibre.com>

So adjust the defconfig and boot script to match.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-12 18:38:32 +02:00
Yann E. MORIN
6e69eabe43 configs/qemu-xtensa: use overlay from the github repository
Rather than bundle the overlay with us, directly fetch it from its
upstream location.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-09 16:58:30 +02:00
Chakra Divi
7de984bdbc board: Add nanopi-m1 Support
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot

Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 18:15:54 +02:00
Arnout Vandecappelle
6999e61394 board/csky: remove host/usr reference from readme.txt
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 16:06:36 +02:00
Arnout Vandecappelle
23671c2f4c board/gdb/bfin-bf512: remove host/usr reference from readme.txt
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 16:06:34 +02:00
Arnout Vandecappelle
6e9c98a838 stm32f469-disco: replace $HOST_DIR/usr with $HOST_DIR in flash script
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 16:06:25 +02:00
Arnout Vandecappelle
3dc8e8a97b stm32f429-disco: replace $HOST_DIR/usr with $HOST_DIR in flash script
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 16:06:24 +02:00
Arnout Vandecappelle
471252feea warpboard: remove $(HOST_DIR)/usr reference from README
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 16:06:23 +02:00
Arnout Vandecappelle
85d35c6d3d chromebook snow: remove $(HOST_DIR)/usr reference from README
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 16:06:21 +02:00
Arnout Vandecappelle
31be2ec220 boards: replace $HOST_DIR/usr/ with $HOST_DIR/ in scripts
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.

This is a mechanical change with
git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g'

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 15:23:13 +02:00
Francois Perrad
20b3f646b0 olimex_a20: refactor with genimage.sh
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-02 00:37:59 +02:00
Francois Perrad
7a794e1143 olimex_a20: refactor with U-Boot boot script
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-02 00:37:11 +02:00
Chakra Divi
bd22ae58fa board: add orangepi-plus support
Signed-off-by: Chakra Divi <chakra@openedev.com>
[Thomas: remove host-uboot-tools from defconfig, already pulled by
BR2_TARGET_UBOOT_BOOT_SCRIPT, remove trailing whitespace.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-01 16:52:40 +02:00