board: Add Vyasa RK3288 board support
Add Vyasa board, from rk3288 family SOC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is contained in:
Jagan Teki
Peter Korsgaard
parent
30daaed193
commit
cdbb96e0b1
@ -67,6 +67,7 @@ acmesystems_aria_g25_128mb_defconfig: *defconfig
|
||||
acmesystems_aria_g25_256mb_defconfig: *defconfig
|
||||
acmesystems_arietta_g25_128mb_defconfig: *defconfig
|
||||
acmesystems_arietta_g25_256mb_defconfig: *defconfig
|
||||
amarula_vyasa_rk3288_defconfig: *defconfig
|
||||
arcturus_ucp1020_defconfig: *defconfig
|
||||
arm_foundationv8_defconfig: *defconfig
|
||||
arm_juno_defconfig: *defconfig
|
||||
|
||||
@ -782,8 +782,10 @@ N: Ismael Luceno <ismael@iodev.co.uk>
|
||||
F: package/axel/
|
||||
|
||||
N: Jagan Teki <jagan@amarulasolutions.com>
|
||||
F: board/amarula/
|
||||
F: board/bananapi/
|
||||
F: board/engicam/
|
||||
F: configs/amarula_vyasa_rk3288_defconfig
|
||||
F: board/friendlyarm/nanopi-a64/
|
||||
F: board/friendlyarm/nanopi-neo2/
|
||||
F: board/olimex/a64-olinuxino/
|
||||
|
||||
4
board/amarula/vyasa/extlinux.conf
Normal file
4
board/amarula/vyasa/extlinux.conf
Normal file
@ -0,0 +1,4 @@
|
||||
label Vyasa linux-next
|
||||
kernel /boot/uImage
|
||||
devicetree /boot/rk3288-vyasa.dtb
|
||||
append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
|
||||
21
board/amarula/vyasa/genimage.cfg
Normal file
21
board/amarula/vyasa/genimage.cfg
Normal file
@ -0,0 +1,21 @@
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot-tpl-spl-dtb {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-tpl-spl-dtb.img"
|
||||
offset = 32K
|
||||
}
|
||||
|
||||
partition u-boot-dtb {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-dtb.img"
|
||||
offset = 8M
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
3
board/amarula/vyasa/linux_gmac.fragment
Normal file
3
board/amarula/vyasa/linux_gmac.fragment
Normal file
@ -0,0 +1,3 @@
|
||||
# Currently mainline kernel exhibits issues when running rockchip gmac
|
||||
# on the board, so enable it as loadable module and insert it later
|
||||
CONFIG_DWMAC_ROCKCHIP=m
|
||||
9
board/amarula/vyasa/post-build.sh
Executable file
9
board/amarula/vyasa/post-build.sh
Executable file
@ -0,0 +1,9 @@
|
||||
#!/bin/sh
|
||||
|
||||
MKIMAGE=$HOST_DIR/bin/mkimage
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
|
||||
cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
|
||||
31
board/amarula/vyasa/readme.txt
Normal file
31
board/amarula/vyasa/readme.txt
Normal file
@ -0,0 +1,31 @@
|
||||
Vyasa RK3288
|
||||
============
|
||||
|
||||
Vyasa is RK3288 based Single board computer with fully supported opensource software.
|
||||
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
$ make amarula_vyasa_rk3288_defconfig
|
||||
|
||||
Then you can edit the build options using
|
||||
|
||||
$ make menuconfig
|
||||
|
||||
Compile all and build rootfs image:
|
||||
|
||||
$ make
|
||||
|
||||
Prepare your SDCard
|
||||
===================
|
||||
|
||||
Buildroot generates a ready-to-use SD card image that you can flash directly to
|
||||
the card. The image will be in output/images/sdcard.img.
|
||||
You can write this image directly to an SD card device (i.e. /dev/xxx):
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/xxx
|
||||
$ sudo sync
|
||||
|
||||
Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.
|
||||
46
configs/amarula_vyasa_rk3288_defconfig
Normal file
46
configs/amarula_vyasa_rk3288_defconfig
Normal file
@ -0,0 +1,46 @@
|
||||
# Architecture
|
||||
BR2_arm=y
|
||||
BR2_cortex_a17=y
|
||||
BR2_ARM_FPU_NEON_VFPV4=y
|
||||
|
||||
# Linux headers same as kernel, a 4.14 series
|
||||
BR2_KERNEL_HEADERS_4_14=y
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vyasa-rk3288"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
||||
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/openedev/linux-openedev"
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d127129e85a020879f334154300ddd3f7ec21c1e"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
|
||||
BR2_LINUX_KERNEL_UIMAGE=y
|
||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-vyasa"
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/amarula/vyasa/linux_gmac.fragment"
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_GENERIC_HOSTNAME="vyasa-rk3288"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to VYASA RK3288!"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/vyasa/genimage.cfg"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/vyasa/post-build.sh"
|
||||
Loading…
Reference in New Issue
Block a user