configs/amarula_a64_relic: new defconfig

Add initial support for Amarula A64-Relic board
with below features:
- U-Boot 2018.07
- Linux 4.17.0-rc6
- Default packages from buildroot

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y and
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

.gitlab-ci.yml

@@ -83,6 +83,7 @@ acmesystems_aria_g25_128mb_defconfig: *defconfig
 acmesystems_aria_g25_256mb_defconfig: *defconfig
 acmesystems_arietta_g25_128mb_defconfig: *defconfig
 acmesystems_arietta_g25_256mb_defconfig: *defconfig
+amarula_a64_relic_defconfig: *defconfig
 amarula_vyasa_rk3288_defconfig: *defconfig
 arcturus_ucls1012a_defconfig: *defconfig
 arcturus_ucp1020_defconfig: *defconfig

DEVELOPERS

@@ -959,6 +959,7 @@ F:	board/orangepi/orangepi-prime/
 F:	board/orangepi/orangepi-win/
 F:	board/orangepi/orangepi-zero-plus2/
 F:	board/pine64/
+F:	configs/amarula_a64_relic_defconfig
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
 F:	configs/bananapi_m1_defconfig

board/amarula/a64-relic/extlinux.conf

@@ -0,0 +1,4 @@
+label linux-4.17.0-rc3
+  kernel /Image
+  devicetree /sun50i-a64-amarula-relic.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p4 rootwait

board/amarula/a64-relic/genimage.cfg

@@ -0,0 +1,10 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-a64-amarula-relic.dtb",
+			"extlinux"
+		}
+	}
+	size = 64M
+}

board/amarula/a64-relic/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

board/amarula/a64-relic/readme.txt

@@ -0,0 +1,81 @@
+Amarula A64 Relic
+================
+
+Amarula A64-Relic is an Allwinner A64 based IoT device, which supports:
+- Allwinner A64 Cortex-A53
+- Mali-400MP2 GPU
+- AXP803 PMIC
+- 1GB DDR3 RAM
+- 8GB eMMC
+- AP6330 Wifi/BLE
+- MIPI-DSI
+- CSI: OV5640 sensor
+- USB OTG
+- 12V DC power supply
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Amarual+A64-Relic
+
+Build
+=====
+
+  $ make amarula_a64_relic_defconfig
+
+  $ make
+
+build files at output/images/:
+  - sunxi-spl.bin
+  - u-boot.itb
+  - Image
+  - sun50i-a64-amarula-relic.dtb
+  - boot.vfat
+  - rootfs.ext4
+
+Write eMMC
+=========
+
+The board comes with an operating system preloaded on the eMMC.
+To replace it with the Buildroot-built system, take the following
+steps
+
+1. Connect the board UART with host and open minicom(ttyUSBx/115200N8)
+
+2. Supply 12V DC for power-on the board.
+
+3. Interrupt U-Boot by pressing enter
+
+4. Create GPT partitions
+  => mmc dev 1
+  => gpt write mmc 1 $partitions
+
+5. Connect the board USB-OTG with USB slot on the host.
+
+6. Initiate fastboot
+  => fastboot 0
+
+7. Write images from host onto eMMC using fastboot
+  $ cd output/images
+  $ sudo fastboot -i 0x1f3a flash loader1 sunxi-spl.bin
+  $ sudo fastboot -i 0x1f3a flash loader2 u-boot.itb
+  $ sudo fastboot -i 0x1f3a flash esp boot.vfat
+  $ sudo fastboot -i 0x1f3a flash system rootfs.ext4
+
+Update eMMC during Development
+==============================
+
+During development, reflashing the entire filesystem image at every
+change is time consuming. A useful alternative is to directly access
+over USB the filesystem stored on the eMMC, using the USB Mass Storage
+capability of U-Boot. To achieve this:
+
+1. Build U-Boot by enabling UMS
+   $ make uboot-menuconfig
+   (select CONFIG_CMD_USB_MASS_STORAGE=y)
+
+2. Follow all 6 steps from 'Write eMMC' and mount eMMC on host
+    => mmc dev 1
+    => ums 0 mmc 1
+
+--
+Jagan Teki <jagan@amarulasolutions.com>
+29-Jun-2018

configs/amarula_a64_relic_defconfig

@@ -0,0 +1,49 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.17 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="amarula_a64_relic"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,v1.0a)/linux-amarula_v1.0a.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-amarula-relic"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Amarula A64-Relic"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/a64-relic/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/a64-relic/post-build.sh"