It's been a while since I've even used buildroot at all and I don't
really have any spare cycles to spend on maintaining its packages.
Let's face reality and drop me from the DEVELOPERS file.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- select host-cython in Config.in
- introduce obj_path in test sample
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 85c5af46ad forgot to drop ucl from
DEVELOPERS file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for USB rtl8821cu wifi cards.
Similar to rtl8821au and rtl8812au-aircrack-ng packages.
https://github.com/morrownr/8821cu-20210118
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive2 board, a board built around the
Starfive JH7110 RISC-V 64bit SoC.
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (5.15 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[Peter: add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV Dock is a RISC-V Linux development kits with high integration,
small size and affordable price designed for opensource developer.
https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV - Nezha CM is a compute module with modular design, equipped
with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3
RAM.
Board support is based on the nezha defconfig already available in
buildroot.
https://wiki.sipeed.com/hardware/en/lichee/RV/RV.htmlhttps://linux-sunxi.org/Sipeed_Lichee_RV
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package install the required firmware for enabling the
Bluetooth device embedded in the RTL8723DS chip.
The driver is included in Linux main tree and can be enabled
with the BT_HCIUART_RTL symbol.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
[Peter: use install -D]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a separate U-Boot package that allows to build the
intermediate SPL binary for the Cortex-R5 core on TI's k3
platforms. Usually, the resulting SPL will be used for k3-image-gen to
build the full R5 boot binary tiboot3.bin.
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Bernd:
- switched to actively maintained fork
- package/Config.in: moved to "Hardware handling" (Peter)
- added toolchain dependencies (Thomas)
- added license hash
- fixed build errors related to iconv and execinfo (Peter)
- removed hook HDDTEMP_REMOVE_MAN (Thomas)
- install hddtemp.db to target
- added build/install _CMDS due to
https://github.com/vitlav/hddtemp/issues/5]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- use GETTEXTIZE=YES, drop host-gettext from _DEPENDENCIES
- drop custom build and install commands now that we gettextize
- explicitly specify the DB path, introduce HDDTEMP_DB_PATH
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
His e-mail address no longer exists:
Your message to sven.haardiek@iotec-gmbh.de couldn't be delivered.
sven.haardiek wasn't found at iotec-gmbh.de.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address no longer exists:
Your message wasn't delivered to derrick@meter.com because the address
couldn't be found, or is unable to receive mail.
Learn more here: https://support.google.com/mail/answer/6596
The response was:
The email account that you tried to reach does not exist. Please try
double-checking the recipient's email address for typos or unnecessary
spaces. Learn more at https://support.google.com/mail/answer/6596
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a package to install the additional edk2 platforms files, not
compatible with the normal licensing requirements and held in the
edk2-non-osi repository.
Only the Marvell Armada files are copied at this point, to support building
edk2 for the MACCHIATObin platform.
The referenced commit corresponds to version edk2-stable202208 of edk2,
based on the timestamps.
This package is heavily inspired from package/edk2-platforms.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The packaged version has a number of security issues, newer versions require
erlang 23+ and nobody has stepped up to maintain it since the issues were
reported:
http://lists.busybox.net/pipermail/buildroot/2022-November/656230.html
So drop the package and add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for Xilinx Versal VCK190 evaluation board.
VCK190 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vck190.html
The VCK190 is based on the Xilinx Versal family:
https://www.xilinx.com/products/silicon-devices/acap/versal.html
The VC1902 included with the VCK190 evaluation board has Xilinx
AI Engine acclerators designed for accelerating machine learning
applications. Also included is an upgrade from prior Zynq and
ZynqMP families to ARM Cortex-A72 cores.
While the Linux kernel for Versal is quite similar to ZynqMP,
the boot process has significantly changed.
Triple-redundant MicroBlaze cores are used to boot and setup
Versal devices. For this reason, current buildroot support
will download pre-built firmware images and use Xilinx bootgen
to generate the boot.bin for the vck190.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for downloading versal microblaze firmware binaries.
These are necessary for booting Xilinx versal devices.
The location of these binaries is temporary, and will soon be added to the
Xilinx firmware repository. The temporary location is using the same free
distribution license as the Xilinx firmware repository.
Once these files are available on the Xilinx repository, this package will
be updated to the new location.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package builds to fail with Linux > 5.15 and abperiasamy's
rtl8812AU_8821AU_linux repository is not maintained since 2 years and
there is now a fork where all pending patches have been upstreamed, so
let's switch to lwfinger's rtl8812au repository that is well
maintained with Linux up to version 5.18 supported. While switching
let's drop all local patches. Also add me as maintainer for this
package in DEVELOPERS file.
Fixes:
http://autobuild.buildroot.net/results/a3db3a6540b67a1f1fe31d61fe1d6824d43f59f0/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Christian Stewart<christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- i.MX Hantro V4L2 Daemon. Provides the vsidaemon, which is needed for
V4L2 nodes to work.
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SSCEP is a client-only implementation of the SCEP (Cisco System's Simple
Certificate Enrollment Protocol).
The goal of SCEP is to support the secure issuance of certificates to
network devices in a scalable manner, using existing technology whenever
possible. The protocol supports the following operations:
* CA and RA public key distribution
* Certificate enrollment
* Certificate and CRL query
Certificate and CRL access can be achieved by using the LDAP protocol,
or by using the query messages defined in SCEP.
CC: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am not really maintaining these packages, I don't follow closely
enough nor use them to take the time to make the necessary changes.
Giulio has been much more reactive than me to fix issues and he is
already listed for them anyway.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Z3, also known as the Z3 Theorem Prover, is a cross-platform
satisfiability modulo theories (SMT) solver.
https://github.com/Z3Prover/z3
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- python bindings 'depends on' python, not 'select' it
- fix check-package in test_z3.py
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a header only library which is required by the latest version
of zxing-cpp.
Include paths and pc file are based off of debian libstb package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
4e7dfe20bb ("configs/friendlyarm_nanopi_m4:
remove defconfig") forgot to fully reflect the removal of the
defconfig in the DEVELOPERS file, causing a get-developers warning:
WARNING: 'board/friendlyarm/nanopi-m4' doesn't match any file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
