configs/friendlyarm_nanopi_neo4: remove defconfig
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499054 Cc: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit is contained in:
Thomas Petazzoni
Yann E. MORIN
parent
24bb610712
commit
5f7a517f5c
@ -1896,8 +1896,6 @@ F: utils/config
|
||||
F: utils/diffconfig
|
||||
|
||||
N: Marek Belisko <marek.belisko@open-nandra.com>
|
||||
F: board/friendlyarm/nanopi-neo4/
|
||||
F: configs/friendlyarm_nanopi_neo4_defconfig
|
||||
F: package/libatasmart/
|
||||
F: package/polkit/
|
||||
F: package/sg3_utils/
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
label NanoPi Neo4 linux
|
||||
kernel /boot/Image
|
||||
devicetree /boot/rk3399-nanopi-neo4.dtb
|
||||
append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
|
||||
@ -1,22 +0,0 @@
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot-tpl-spl-dtb {
|
||||
in-partition-table = "no"
|
||||
image = "idbloader.img"
|
||||
offset = 32K
|
||||
}
|
||||
|
||||
partition u-boot-dtb {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot.itb"
|
||||
offset = 8M
|
||||
size = 30M
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@ -1,5 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
|
||||
@ -1,53 +0,0 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
NanoPi Neo4 is a RK3399 SoC based ARM64 board.
|
||||
|
||||
|
||||
Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
|
||||
Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
|
||||
|
||||
Build
|
||||
=====
|
||||
|
||||
Run NanoPi Neo4 configuration
|
||||
|
||||
$ make friendlyarm_nanopi_neo4_defconfig
|
||||
|
||||
To build, run make comamnd.
|
||||
|
||||
$ make
|
||||
|
||||
Files created in output directory
|
||||
=================================
|
||||
|
||||
output/images
|
||||
|
||||
├── bl31.bin
|
||||
├── bl31.elf
|
||||
├── Image
|
||||
├── rk3399-nanopi-neo4.dtb
|
||||
├── rootfs.ext2
|
||||
├── rootfs.ext4 -> rootfs.ext2
|
||||
├── rootfs.tar
|
||||
├── sdcard.img
|
||||
├── u-boot.bin
|
||||
├── u-boot.itb
|
||||
├── u-boot-spl-dtb.bin
|
||||
├── u-boot-tpl-dtb.bin
|
||||
├── u-boot-tpl-dtb.img
|
||||
└── u-boot-tpl-spl-dtb.img
|
||||
|
||||
Creating bootable SD card:
|
||||
=========================
|
||||
|
||||
Simply invoke (as root)
|
||||
|
||||
# dd if=output/images/sdcard.img of=/dev/sdX && sync
|
||||
|
||||
Where X is your SD card device
|
||||
|
||||
Serial console
|
||||
--------------
|
||||
|
||||
Baudrate for this board is 1500000
|
||||
@ -1,55 +0,0 @@
|
||||
# Architecture
|
||||
BR2_aarch64=y
|
||||
BR2_cortex_a72_a53=y
|
||||
|
||||
# Linux headers same as kernel, a 5.4 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
|
||||
|
||||
# Firmware
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-neo4-rk3399"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.18"
|
||||
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4"
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_TARGET_ROOTFS_EXT2_SIZE="70M"
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo4/genimage.cfg"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo4/post-build.sh"
|
||||
Loading…
Reference in New Issue
Block a user