configs/rock_pi_n10: remove defconfig

This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/3259671399

Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is contained in:
Thomas Petazzoni 2022-11-02 21:18:57 +01:00
parent 707938d684
commit 66653be5b8
6 changed files with 0 additions and 166 deletions

View File

@ -2731,9 +2731,7 @@ N: Suniel Mahesh <sunil@amarulasolutions.com>
F: board/friendlyarm/nanopi-m4
F: board/pine64/rockpro64
F: board/radxa/rockpi-n8
F: board/radxa/rockpi-n10
F: configs/rock_pi_n8_defconfig
F: configs/rock_pi_n10_defconfig
F: configs/rockpro64_defconfig
F: package/arm-gnu-toolchain/

View File

@ -1,4 +0,0 @@
label RK3399_ROCK_PI_N10 linux
kernel /Image
devicetree /rk3399pro-rock-pi-n10.dtb
append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait

View File

@ -1,39 +0,0 @@
image boot.vfat {
vfat {
files = {
"Image",
"rk3399pro-rock-pi-n10.dtb",
"extlinux"
}
}
size = 112M
}
image sdcard.img {
hdimage {
partition-table-type = "gpt"
}
partition loader1 {
image = "idbloader.img"
offset = 32K
}
partition loader2 {
image = "u-boot.itb"
offset = 8M
}
partition boot {
partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext4"
}
}

View File

@ -1,5 +0,0 @@
#!/bin/sh
BOARD_DIR="$(dirname $0)"
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

View File

@ -1,61 +0,0 @@
RADXA ROCKPI-N10
================
https://wiki.radxa.com/RockpiN10
Build:
======
$ make rock_pi_n10_defconfig
$ make
Files created in output directory
=================================
output/images
.
├── bl31.elf
├── boot.vfat
├── extlinux
├── idbloader.img
├── Image
├── rk3399pro-rock-pi-n10.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
└── u-boot.itb
Creating bootable SD card:
==========================
Simply invoke (as root)
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
Where X is your SD card device.
Booting:
========
Serial console:
---------------
RockPi-N10 has a 40-pin GPIO header. The pin layout is as follows:
pin 6: gnd
pin 8: tx
pin 10: rx
Baudrate for this board is 1500000.
The boot order on rockpi-n10 is emmc, sd. If emmc contains a valid Image, the board
always boots from emmc. To boot from SD, erase emmc as per the guide:
https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html
Login:
------
Enter 'root' as login user, and the prompt is ready.
wiki link:
----------
https://wiki.amarulasolutions.com/bsp/rockchip/rk3399pro/rock-pi-n10.html

View File

@ -1,55 +0,0 @@
# Architecture
BR2_aarch64=y
BR2_cortex_a72_a53=y
# Linux headers same as kernel, a 5.7 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y
# Firmware
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
# Bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="cf2747360fdd1eb0d51dd01a984c7c62c7f714fe"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-n10-rk3399pro"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.2"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399pro-rock-pi-n10"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
# Filesystem
BR2_TARGET_GENERIC_HOSTNAME="rockpi-n10"
BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N10"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="160M"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-n10/genimage.cfg"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-n10/post-build.sh"