configs/friendlyarm_nanopi_r1: remove defconfig
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499056 Cc: Davide Viti <zinosat@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit is contained in:
Thomas Petazzoni
Yann E. MORIN
parent
d968cab0bd
commit
60361bfabe
@ -721,8 +721,6 @@ N: David Pierret <david.pierret@smile.fr>
|
||||
F: package/bat/
|
||||
|
||||
N: Davide Viti <zinosat@gmail.com>
|
||||
F: board/friendlyarm/nanopi-r1/
|
||||
F: configs/friendlyarm_nanopi_r1_defconfig
|
||||
F: package/flann/
|
||||
F: package/python-paho-mqtt/
|
||||
F: package/qhull/
|
||||
|
||||
@ -1,8 +0,0 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-r1.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@ -1,37 +0,0 @@
|
||||
# Minimal SD card image for the NanoPi M1
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h3-nanopi-r1.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
||||
@ -1,2 +0,0 @@
|
||||
# USB ethernet
|
||||
CONFIG_USB_RTL8152=y
|
||||
@ -1,170 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "sun8i-h3-nanopi.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPi-R1";
|
||||
compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
|
||||
|
||||
aliases {
|
||||
serial1 = &uart3;
|
||||
ethernet0 = &emac;
|
||||
ethernet1 = &emac;
|
||||
ethernet2 = &sdio_wifi;
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
|
||||
};
|
||||
|
||||
reg_gmac_3v3: gmac-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "gmac-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100000>;
|
||||
enable-active-high;
|
||||
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
leds {
|
||||
/delete-node/ status;
|
||||
/delete-node/ pwr;
|
||||
led1 {
|
||||
label = "LED1";
|
||||
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "LED2";
|
||||
gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "LED3";
|
||||
gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
};
|
||||
|
||||
r_gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
input-name = "k1";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sw_r_npi>;
|
||||
|
||||
/delete-node/ k1;
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&emac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&external_mdio {
|
||||
ext_rgmii_phy: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
vqmmc-supply = <®_vcc3v3>;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
|
||||
sdio_wifi: sdio_wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
vqmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
@ -1,29 +0,0 @@
|
||||
NanoPi R1
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the NanoPi R1. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make friendlyarm_nanopi_r1_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
@ -1,22 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_SUNXI=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_MACH_SUN8I_H3=y
|
||||
CONFIG_DRAM_CLK=408
|
||||
CONFIG_DRAM_ZQ=3881979
|
||||
CONFIG_DRAM_ODT_EN=y
|
||||
CONFIG_MACPWR="PD6"
|
||||
# CONFIG_VIDEO_DE2 is not set
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_CONSOLE_MUX=y
|
||||
CONFIG_SYS_CLK_FREQ=480000000
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
|
||||
CONFIG_SUN8I_EMAC=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
|
||||
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
|
||||
@ -1,102 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "sun8i-h3-nanopi.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyARM NanoPi R1";
|
||||
compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
|
||||
|
||||
reg_gmac_3v3: gmac-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "gmac-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100000>;
|
||||
enable-active-high;
|
||||
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
gmac_power_pin_nanopi: gmac_power_pin@0 {
|
||||
pins = "PD6";
|
||||
function = "gpio_out";
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
cap-mmc-hw-reset;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&external_mdio {
|
||||
ext_rgmii_phy: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
@ -1,49 +0,0 @@
|
||||
# Architecture
|
||||
BR2_arm=y
|
||||
BR2_cortex_a7=y
|
||||
BR2_ARM_FPU_VFPV4=y
|
||||
|
||||
# Linux headers same as kernel, a 5.0 series
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
|
||||
|
||||
# System configuration
|
||||
BR2_TARGET_GENERIC_HOSTNAME="nanopi-r1"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi R1"
|
||||
|
||||
# Bootloaders
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts"
|
||||
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
|
||||
BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig"
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-r1/boot.cmd"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
|
||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-r1/kernel/linux-extras.config"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts"
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-r1"
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r1/genimage.cfg"
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
|
||||
# Additional tools
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
Loading…
Reference in New Issue
Block a user