DROPBEAR_DSS is now disabled by default. Enable only when
BR2_PACKAGE_DROPBEAR_LEGACY_CRYPTO is enabled.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If BR2_PER_PACKAGE_DIRECTORIES is enabled and Buildroot is using
HOST_MAKE for a Kconfig package. The $(1)_KCONFIG_RULES does not work
correctly, and kconfig-package-regen-dot-config will always run the
'oldconfig' target.
This is because $(1)_KCONFIG_RULES expands before the first recipe line
of .stamp_dotconfig. $(1)_KCONFIG_RULES attempts to call $(HOST_MAKE),
which requires that the per-package/<pkg>/host directory has been setup.
But that directory is not setup until a later recipe line. This results
in $(1)_KCONFIG_RULES silently failing, and so always configuring with
'oldconfig'.
Fix the issue by calling the command as part of the recipe, so
$(HOST_MAKE) will be ready in time. As the comment on $(1)_KCONFIG_RULES
describes, we should not use backticks. Use an intermediary file to
store the output of the command, so that backticks are not needed.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch adds an option that allows to install the u-boot.elf file
produced when CONFIG_REMAKE_ELF=y in the U-Boot configuration.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump ATF to boundary-lf-5.15.52-2.1.0.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- U-Boot branch boundary-v2022.04 from Boundary repo.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Based on NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- i.MX Hantro V4L2 Daemon. Provides the vsidaemon, which is needed for
V4L2 nodes to work.
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an INSTALL_STAGING_CMDS define as libraries needed by
imx-vpu-hantro-daemon.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v39.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Highligts include support for MbedTLS and a serious memory leak fix to
the GnuTLS backend.
Changes:
- Add support for MbedTLS
- Add support for per-provider interface to bind to
- Use HTTP-only for api.ipify.org, default (fallback) checkip service
Fixes:
- serious memory leak in GnuTLS backend
- ca-trust-file has no effect for GnuTLS
- handle easyDNS "no update required" as OK status
- use configured server:port, don't force port 443 for HTTPS
(From https://github.com/troglobit/inadyn/releases/tag/v2.10.0)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If a custom os_prefix directory is specified then the Raspberry Pi
firmware probes for the README file in overlays directory. If
this is not found then firmware will use the top-level overlays
directory which can be confusing if os_prefix is used in conjunction
with other filters to implement alternate boot behaviour.
In Raspberry Pi OS the README file is always included to ensure
that the relevant documentation is in sync with the overlays. Rather
that including the entire file let's just include an empty file so
that overlays directory is consistent with the Raspberry Pi OS
APT package.
From
https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix
Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared
with the main OS (i.e. os_prefix is ignored).
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable aarch64 support for rpi-userland to provide
vcmailbox and vcgencmd in 64bit builds. The are useful
for programming OTP and system debug.
The ARM64=ON parameter restricts the make targets
to only include those supported on 64-bit i.e. it
excludes the legacy Broadcom EGL drivers.
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SSCEP is a client-only implementation of the SCEP (Cisco System's Simple
Certificate Enrollment Protocol).
The goal of SCEP is to support the secure issuance of certificates to
network devices in a scalable manner, using existing technology whenever
possible. The protocol supports the following operations:
* CA and RA public key distribution
* Certificate enrollment
* Certificate and CRL query
Certificate and CRL access can be achieved by using the LDAP protocol,
or by using the query messages defined in SCEP.
CC: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- Fix use of $DAEMON, found by check-package
- Expects DAEMON to be name of daemon controlled by script, this
causes ripple efects in rest of script
- Recommend `chmod a-x`, .mk file installs with `-m 0755`
- Fix shellcheck warnings:
- Use "$VAR" in case of spaces in filenames
- recommend not using $? in if stmt, should use `if start-stop ...`
- mismatch in indentation in case-esac
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As stated in [1] this and future release will only be hosted on
freedesktop's gitlab.
Archives hosted on gitlab are missing the gpg signature.
1: 49bb905131
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[yann.morin.1998@free.fr: fix spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Z3, also known as the Z3 Theorem Prover, is a cross-platform
satisfiability modulo theories (SMT) solver.
https://github.com/Z3Prover/z3
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- python bindings 'depends on' python, not 'select' it
- fix check-package in test_z3.py
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This adds a separate opencv4_contrib package to manage
downloading/unpacking that repository. These extra modules
are useful for a lot of applications, but not necessary
for minimal installs, so they are all given dedicated Kconfig
options
It's important to note that the opencv4-contrib package
downloads extra source that is compiled as a part of
the opencv4 package. This is why it is a dependency
of opencv4, and not the other way around
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
commit e37c110 ("package/gnuradio: bump version to 3.10.4.0")
included two numbered patches. Those are generating
"make check-package" warnings.
Fixes:
make check-package
package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch:4: generate your patches with 'git format-patch -N'
package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch:4: generate your patches with 'git format-patch -N'
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a header only library which is required by the latest version
of zxing-cpp.
Include paths and pc file are based off of debian libstb package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Current python-automat version 20.2.0 no longer work with Python 3.11
updated in commit 738500c296.
Running package runtime test with command:
support/testing/run-tests \
-d dl \
-o output_folder \
tests.package.test_python_automat.TestPythonPy3Automat
Fails with output:
Traceback (most recent call last):
File "/root/sample_python_automat.py", line 27, in <module>
led.turn_on()
^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/automat/_methodical.py", line 232, in __get__
File "/usr/lib/python3.11/site-packages/automat/_introspection.py", line 43, in decorator
File "/usr/lib/python3.11/site-packages/automat/_introspection.py", line 35, in copyfunction
File "/usr/lib/python3.11/site-packages/automat/_introspection.py", line 23, in copycode
TypeError: code() argument 13 must be str, not int
This commit fixes this issue by updating the package to the latest
version.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replaced patches with upstream patch which fixes both problems.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for new optional bluez5-backend-native-mm and readline
config options.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- remove all no more required patches
- backport 2 patches to fix failures induces by missing headers
- add dependency to SPDLOG
- add pybind dependency where python is set
Note:
- Since gnuradio 3.10 swig was replaced by pybind. Now python libraries,
bindings and python wrappers are produces using pybind: this
why python-pybind is a buildtime dependency. As mentionned in [1], this one
is a stagging only package: headers must be into staging directory, so it
can't be host and at the same time since this package provides only headers
and .cmake files nothing has to be installed into the target directory. A
select is required because it's not an host package and
GNURADIO_DEPENDENCIES is updated with python-pybind to have pybind present
before gnuradio's build.
- host-python-numpy is now required since some cpp bindings uses numpy's
functions directly. python-numpy (target package) is left required because
python blocks and wrappers needs this library at runtime.
[1] http://lists.busybox.net/pipermail/buildroot/2022-October/653030.html
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libsndfile is only needed by the sbctester utility and the library can
be built without this dependency.
Add a config option to cover not just sbctester but the command-line
utilities as well. While the utilities may be useful for debugging,
normal usage will only need libsbc and these applications can be
omitted.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the latest point release in the stable 2.13 branch (currently
the latest stable branch available).
Cc: Clément Léger <clement.leger@bootlin.com>
Reported-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The build of lttng-modules will fail if the kernel does not have
CONFIG_TRACEPOINTS enabled. However, CONFIG_TRACEPOINTS is a
prompt-less option, and the most generic option that does enable
CONFIG_TRACEPOINTS is CONFIG_FTRACE.
In addition, CONFIG_FTRACE will also enable CONFIG_STACKTRACE, which
is needed on CPU architectures that don't provide the STACKWALK
mechanism in the kernel, as is the case on ARM 32-bit for example.
Therefore, let's enable CONFIG_FTRACE when building lttng-modules.
Cc: Clément Léger <clement.leger@bootlin.com>
Reported-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
