Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.4.3
- Bump U-Boot to 2023.07.02
- Bump TF-A to v2.9
While at it, tune the documentation:
- Increase the amount of memory in the example commands to help run the
largest OS distributions.
- Update the link to the IR Guide to point at the latest version.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed to auto-load some kernel modules needed for the HW to
work.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit cbd91e89e4
we can use the default BR2_riscv_g to select IMAFD extensions and
still be able to enable additional extensions, such as the C extension
in our cse.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All defconfigs were runtime tested in Qemu 8.0.3.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's select the RVA option as Andes 45-series CPUs support IMAFDC
extensions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM62 board by introducing the
am62x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM62
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM64 board by introducing the
ti_am64x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM64
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the RISCV_ISA_RVC config option to match updated RISCV kconfig
instruction set options.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch introduces patches for the custom kernel, as it is
currently used for the Radxa Rock 5B. The patches fix two gcc
compiler warnings, which result in a build error, if the kernel
is used with gcc version 12.
Since also the code of custom board drivers for WiFi support is
affected, and no fixes are provided by the vendor, the custom WiFi
support is disabled.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the instruction sets for MPFS icicle kit to mirror the
configuration update, i.e. It is now classed as a RISC-V G core with
support for C, IMAFDC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The generic extension set 'G' is realy a base with the minimal set of
extensions needed to be comfortable (but not required) to run a
linux-bassed system. Similarly, we consider the custom to be about the
custom set of features (not about a custom core implementing such a
set).
As such, we allow that a core with the G set can have futher extensions
without requiring it to be configured as a custom set.
We drop the intermediate symbols with the prompts, and move the prompts
to the previously hidden symbols, and add a prompt for the I set.
This alows one to clearly see what the generic set is about, without
having to delve into the help and hunt the list of selected symbol.
Note however that the G set implies Zicsr and Zifencei, but we have no
prompt for thos two, because in Buildroot, we assume that they are
mandatory and always present, like the I set (which they previously were
part of).
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
[yann.morin.1998@free.fr:
- drop the intermediate symbols
- move prompt to previously hidden symbols
- add symbol for I
- update defconfigs
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Don't specify the ARCH_FLAGS of U-Boot, so both extensions can be
appended to -march when building w/ gcc-12.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/4839059655
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The issue seems to be fixed. I checked qemu and linux git repositories
but can not find any information when this is starting to work.
System gets successfully an IP, no further testing was done.
Tested with Qemu 8.0.3 and Linux 6.1.x.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The m68k Linux kernel build is broken with binutils >= 2.41 with:
arch/m68k/fpsp040/skeleton.S: Assembler messages:
arch/m68k/fpsp040/skeleton.S:502: Error: junk at end of line, first unrecognized character is `#'
arch/m68k/fpsp040/skeleton.S:508: Error: junk at end of line, first unrecognized character is `#'
This commit adds a backport from the upstream Linux kernel which fixes
this issue. Many thanks to Romain Naour for the issue investigation
and the identification of the kernel commit fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- improve 8ULP support (rev A1)
- add mmc user fastboot support
- add fastboot partconf support
- add nitrogen8mp smarc support
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- ATF v2.8 (including mainline buildroot patches)
- PMUFW xilinx_v2023.1
- Updated pm_cfg_obj.c from Vitis v2023.1
- Removed kria u-boot patch which is included with xilinx-v2023.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot 2022.05 use binutils 2.37 by default, but the binutils
version was downgraded to the previous binutils version in qemu_ppc64*
defconfigs due to a bug in binutils 2.37 [1].
Later when binutils 2.36 has been removed the binutils version has
been updated to 2.38 (even though it was already the default version
selected by Buildroot at that time) [2].
Since then, several binutils release has been added and the binutils
version 2.38 has been removed recently [3].
Since the initial bug is gone with the removal of binutils 2.37,
we can safely remove the binutils version from qemu_ppc64 defconfigs.
[1] 1e2fe860f3
[2] e461c9adc8
[3] 1391c99d62
Fixes:
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/4798047373
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel is built without network support, so network utils are useless.
This has a positive impact on the size of busybox and xipImage, making
them smaller.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiegineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 11 [1] the sparc architecture is disabled since
it produce a non working image. Buildroot now provide gcc
13.x, 12.x and 11.x and we are going to remove gcc 10
that was the last working release (thanks to a local patch).
First remove qemu_sparc_ss10_defconfig since it will no longer
be possible to build it with the internal toolchain backend.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The u-boot.stm32 image is now created by binman tool, so the
BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be
disabled, but pylibfdt is now needed.
Tested on stm32mp157f_dk2.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported in commit [1] of the U-Boot project, the config.mk file has
been suppressed in order to use binman to manage FIT
generation. Therefore, the "u-boot.stm32" make target should no longer
be used with recent versions of U-Boot.
The configuration option added by this comit allows the creation of
the u-boot.stm32 image for both recent versions of U-Boot, which use
binman, and older versions.
Legacy handling would have suggested that this new option should
"default y" to preserve existing behavior, but as moving forward all
U-Boot new versions will no longer need this u-boot.stm32 target, it
probably makes sense here to not comply with this backward
compatibility rule, as an exception.
[1] 5564b4cd4d5c69 ("stm32mp: add binman support for STM32MP15x")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: David Reaver <me@davidreaver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build the am335x-bonegreen-wireless.dtb device tree.
The genimage script which is shared between beaglebone and
beaglebone_qt5 was updated to support the bonegreen-wireless.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Regression builds failed to build uboot due to missing OpenSSL
library.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes uboot build errors:
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
|
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
