NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

configs/icnova-a20-adb4006: new defconfig

Browse Source 
Add a defconfig for ICnova A20 SomPi compute module on ADB4006
development board with Allwinner A20 chip and 512MB/1GB RAM.

Board support package includes the following components:
- mainline Linux kernel 6.1.35
- mainline U-Boot 2023.04
- custom dts & uboot defconfig
- default packages from buildoot

https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006
https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM

The Linux DTS is already accepted upstream and will be part of Linux
6.5:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts?id=de2bdfb7f79d5c655eb056d459e02be2c7f13c8b

The U-Boot DTS and defconfig have been submitted:
https://lists.denx.de/pipermail/u-boot/2023-May/518688.html

Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Tested-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is contained in:
Ludwig Kormann 2023-06-28 11:58:25 +02:00 committed by Thomas Petazzoni
parent ac65841def
commit f47b5e39fb
8 changed files with 317 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
DEVELOPERS
View File

@ -1948,6 +1948,10 @@ F: package/python-simplejson/
F: package/python-versiontools/
F: package/wilc-firmware/
N: Ludwig Kormann <ludwig.kormann@ict42.de>
F: board/in-circuit/
F: configs/icnova*
N: Maeva Manuel <maeva.manuel@oss.nxp.com>
F: board/freescale/imx8qmmek/
F: configs/freescale_imx8qmmek_defconfig

5
board/in-circuit/icnova-a20-adb4006/boot.cmd Normal file
View File

@ -0,0 +1,5 @@
setenv fdt_high ffffffff
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
fatload mmc 0 $kernel_addr_r zImage
fatload mmc 0 $fdt_addr_r sun7i-a20-icnova-a20-adb4006.dtb
bootz $kernel_addr_r - $fdt_addr_r

38
board/in-circuit/icnova-a20-adb4006/genimage.cfg Normal file
View File

@ -0,0 +1,38 @@
# Minimal SD card image for the ICnova A20 SomPi on ADB4006
# Based in the Cubieboard2 genimage.cfg
image boot.vfat {
vfat {
files = {
"zImage",
"sun7i-a20-icnova-a20-adb4006.dtb",
"boot.scr"
}
}
size = 10M
}
image sdcard.img {
hdimage {
}
partition u-boot {
in-partition-table = "no"
image = "u-boot-sunxi-with-spl.bin"
offset = 8K
size = 1016K # 1MB - 8KB
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
size = 512M
}
}

1
board/in-circuit/icnova-a20-adb4006/linux.fragment Normal file
View File

@ -0,0 +1 @@
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y

137
board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006.dts Normal file
View File

@ -0,0 +1,137 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
// Copyright (C) 2023 In-Circuit GmbH
/dts-v1/;
#include "sun7i-a20-icnova-a20.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
model = "In-Circuit ICnova A20 ADB4006";
compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
"allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_YELLOW>;
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
default-state = "on";
};
led-1 {
function = LED_FUNCTION_HEARTBEAT;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
linux,default-trigger = "heartbeat";
};
};
};
&ahci {
target-supply = <&reg_ahci_5v>;
status = "okay";
};
&codec {
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&reg_ahci_5v {
status = "okay";
};
&ac_power_supply {
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

20
board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006_uboot_defconfig Normal file
View File

@ -0,0 +1,20 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-adb4006"
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SCSI_AHCI=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

62
board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20.dtsi Normal file
View File

@ -0,0 +1,62 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
// Copyright (C) 2023 In-Circuit GmbH
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
};
&i2c0 {
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};

50
configs/icnova-a20-adb4006_defconfig Normal file
View File

@ -0,0 +1,50 @@
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_FPU_NEON_VFPV4=y
# Linux headers same as kernel, a 6.1 LTS series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
# System
BR2_TARGET_GENERIC_HOSTNAME="ICnova A20 ADB4006"
BR2_TARGET_GENERIC_ISSUE="Welcome to ICnova A20 ADB4006!"
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
BR2_SYSTEM_DHCP="eth0"
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/in-circuit/icnova-a20-adb4006/genimage.cfg"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.35"
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/in-circuit/icnova-a20-adb4006/linux.fragment"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20.dtsi board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006.dts"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
# Filesystem
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
# Bootloaders
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006_uboot_defconfig"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20.dtsi board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006.dts"
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/in-circuit/icnova-a20-adb4006/boot.cmd"