Userspace Raspberry Pi PWM/PCM/SPI library for SK6812 and WS281X LEDs.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Colorlog is a formatter for the python logging module.
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am exclusively using my Gmail address for now on. Reflect this in
the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mathieu is no longer working at Savoir-faire Linux, update his email
address in the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Keep listing the test infra so the developer is included in reviews, but
trim the list of tests to those the developer are most interested in.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lrzip is a compression utility that excels at compressing
large files (usually > 10-50 MB)
Signed-off-by: Sam Lancia <sam@gpsm.co.uk>
[Thomas: license is GPL-2.0+, not GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add basic support for the Libre Computer "La Frite" SBC.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since syslog-ng 3.11.1 eventlog has been bundled with the sources.
Remove the separate package.
We don't add Config.in.legacy handling because eventlog was only used
by syslog-ng, and was not really meant to be used by anyone else, so
there is no point in warning users who had this package enabled in
their configuration that it no longer exists, as it was only used by
syslog-ng, and syslog-ng now bundles eventlog.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
[Thomas: extend explanation about why we don't have any
Config.in.legacy handling]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Minimodem is a command-line program which decodes (or generates)
audio modem tones at any specified baud rate, using various
framing protocols. It acts a general-purpose software FSK modem,
and includes support for various standard FSK protocols such as
Bell103, Bell202, RTTY, TTY/TDD NOAA SAME, and Caller-ID.
Signed-off-by: Alexander Kurz <akurz@blala.de>
[Thomas:
- switch from a depends on to a select for the libsndfile or
pulseaudio or alsa dependency
- re-order statements in Config.in
- add missing host-pkgconf dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My email address will be deactivated in two weeks.
Signed-off-by: Refik Tuzakli <refik.tuzakli@savronik.com.tr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gerome Burlats recently took care of the Qemu defconfigs, so it makes
sense to list him as a contact for the maintenance of these
defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@smile.fr>
Acked-by: Gerome Burlats <gerome.burlats@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<Pranit.Sirsat@imgtec.com>: host mxa-00376f01.gslb.pphosted.com[91.207.212.86]
said: 550 5.1.1 User Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kevin Joly (kevin.joly@sensefly.com)<mailto:kevin.joly@sensefly.com>
Your message couldn't be delivered to the recipient because you don't have permission to send to it.
Looking at his LinkedIn profile, he left SenseFly in January 2019,
which quite certainly explains why his @sensefly.com e-mail address is
no longer working.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489410
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489367
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489328
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489329
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489325
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Andy Kennedy (andy.kennedy@adtran.com)<mailto:andy.kennedy@adtran.com>
The e-mail address you entered couldn't be found. Please check the
recipient's e-mail address and try to resend the message. If the
problem continues, please contact your helpdesk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<scjthm@live.com>: host live-com.olc.protection.outlook.com[104.47.5.33] said:
550 5.5.0 Requested action not taken: mailbox unavailable.
[HE1EUR02FT033.eop-EUR02.prod.protection.outlook.com] (in reply to RCPT TO
command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<marcin.nowakowski@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<eswierk@skyportsystems.com>: host aspmx.l.google.com[108.177.127.27] said:
550-5.1.1 The email account that you tried to reach does not exist. Please
try 550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
https://support.google.com/mail/?p=NoSuchUser 33si1105652eds.275 - gsmtp
(in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address @imgtec.com is bouncing:
<abhilash.tuse@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support to test that the root passowrd is working as expected.
- Buildtime test: Check the hash present in the generated '/etc/shadow'.
- Runtime test: Build an armv7 image and try to login with a password.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas: license is MIT, not Apache-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a minimal defconfig to build a Buildroot system for
the STM32MP157 Discovery Kit, which is the low-cost evaluation
platform for the new STM32MP157 system-on-chip from ST. This
system-on-chip features a single or dual Cortex-A7, a single
Cortex-M4, and a wide variety of peripherals.
This commit includes a custom linux configuration file, because there
is no specific defconfig for this platform in the kernel, only
multi_v7_defconfig supports it, which is really a massive
defconfig. That's why a custom linux configuration file is added.
A small U-Boot config fragment allows to disable the watchdog, so that
userspace by default doesn't need to have a watchdog daemon running.
The vendor U-Boot and Linux trees are used for the moment, but the
platform support is being upstreamed, so switching to upstream
versions will be possible in the relatively near future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter is already listed in the DEVELOPERS file for board/raspberrypi/
and configs/raspberrypi3_defconfig, and in practice contributes
regularly to all RPi defconfigs. It makes sense to have him listed in
the DEVELOPERS file for all RPi defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Acked-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rafal was the last person modifying this defconfig. Let's add him as
the contact for this defconfig, so that he receives build failure
notifications and gets Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Rafal Susz <rafal.susz@gmail.com>
Acked-by: Rafal Susz <rafal.susz@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sergio added this defconfig a while ago, and is still active
contributing to Buildroot, so let's add him as the contact for this
defconfig, so that he receives build failure notifications and gets
Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Scott Fan <fancp2007@gmail.com>
Acked-by: "Sergio Prado" <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Luca Ceresoli has de-facto been updating/maintaining the
zynq_microzed_defconfig and zynq_zc706_defconfig for the past few
years, so let's add him in the DEVELOPERS for those two defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Christophe has recently taken care of those defconfigs, so let's add
him as a contact for those defconfigs, so that he receives build
failure notifications and is Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Cc: Lee Jones <lee.jones@linaro.org>
Acked-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Alexey was the last person to make significant changes to this
defconfig, so let's add him as a contact for the maintenance of this
defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Alexey Brodkin <alexey.brodkin@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann originally contributed this defconfig, and updated it regularly
afterwards, so let's list him as contact for this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio has de-facto been maintaining this defconfig for the past few
years, so let's add him as a contact for it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
restclient-cpp is a simple REST client library for C++
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The odroidc2_defconfig has been dropped in commit
b80712a16a, do it no longer makes sense
to list it in the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Python interface to the Redis key-value store.
https://github.com/andymccurdy/redis-py
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Peter: hiredis is an optional runtime dependency, not build time]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python extension that wraps protocol parsing code in hiredis.
It primarily speeds up parsing of multi bulk replies.
https://github.com/redis/hiredis-py
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enumerates all IP addresses on all network adapters of the system.
https://github.com/pydron/ifaddr
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas: add license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bitcoin Core is an open source project which maintains and releases
Bitcoin client software called “Bitcoin Core”.
Signed-off-by: Fabio Urquiza <fabiorush@gmail.com>
[Thomas:
- Don't create a new blockchain applications sub-menu for now, put
this package in "Miscellaneous applications"
- Do not select BR2_INSTALL_LIBSTDCPP, use depends on instead, and
add the corresponding comment.
- Do not select BR2_TOOLCHAIN_BUILDROOT_USE_SSP. Instead pass
--disable-hardening, and let Buildroot pass the appropriate CFLAGS
when hardening features are enabled system-wide.
- Add missing BR2_TOOLCHAIN_HAS_ATOMIC dependency
- Add quirky !(BR2_arm || BR2_armeb) || BR2_USE_MMU because the
Cortex-M toolchains don't provide 8-byte __atomic intrinsics, but
we don't have a good way to express that today
- Add missing BR2_TOOLCHAIN_HAS_GCC_BUG_64735 due to the use of
std::future
- Use only one BITCOIN_CONF_OPTS assignment to pass all options]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new jack1 package alongside the existing jack2.
While jack1 and jack2 are two equivalent implementations of the same
protocol, they differ in a few details and both of them are being
actively used (jack2 is not considered to be a replacement of jack1).
It is not possible to enable both at the same time, so hide away jack1
when jack2 is enabled (to keep existing defconfig files working).
For more information, see:
https://github.com/jackaudio/jackaudio.github.com/wiki/Q_difference_jack1_jack2
Signed-off-by: Adam Heinrich <adam@adamh.cz>
[yann.morin.1998@free.fr:
- fix coding style
- use the release tarball, not a git clone
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Peter: add host-pkgconf dependency, reorder dependencies]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An ASCII-art game like Space Invaders using ncurses.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sshguard protects hosts from brute-force attacks against SSH and other
services.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Peter: cleanup, start init script at S49, correct license, select iptables]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for the HiFive Unleashed board. This includes
building the firmware, kernel and rootFS for the HiFive Unleashed.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- fix the directory name hifive_unleased -> hifive-unleashed
- drop from readme.txt the instructions about manually flashing each
partition, since we have a full SD card image
- drop the custom post-image.sh script]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Custom u-boot
Linux v5.1
ATF v2.0
Buildroot default packages
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1
- Use final 5.1 kernel
- Use default ext2 filesystem]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
u-boot v2019.04
Linux v5.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas: use BR2_TARGET_UBOOT_BOOT_SCRIPT to generate the U-Boot
script, instead of doing it in the post-build]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Tested-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux v5.2
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the kernel headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y
- Use the final 5.2 kernel instead of rc1.
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Piglit is an open-source test suite for OpenGL implementations.
It's an python3 script based around several tools like glxinfo,
wflinfo, dmesg.
Even though waffle support can be replaced by freeglut,
using pliglit with waffle is recommended since freeglut
will be replaced by waffle.
Add host-python-{mako,numpy,six} dependency since the build system
is checking with the host-python interpreter.
There is no comment about waffle dependency due to too complex
dependencies of waffle.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Reworked during the Buildroot summer camp 2019]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Arnout: small corrections to license info. It's messy.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
PowerPC kernel developers were after a userspace for testing 32-bit
powerpc kernels. This machine both suits that requirement and has
support in qemu. It's also a fairly common piece of 32-bit ppc hardware.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
[Peter: lock kernel/headers to 5.2.4]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds the c-capnproto package. This creates a C plugin for the regular
capnproto capnpc compiler. It supports only serialization (no RPC).
Since it depends on capnproto, the package selects capnproto and has the
same requirements as capnproto.
The host version is always needed for the code generator, which is what
gets called by packages using it. The target version is also always
needed for the library. Therefore, no Config.in.host option is needed.
We need to use the git download method because the package has
submodules. The submodule is gtest, which is not really needed, but it's
complicated to remove the dependency.
The version is the latest upstream git hash. It is version 0.3 with just
two patches applied: one to the README file, and a fix submitted by us.
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Arnout:
- use latest upstream version which has patch already applied;
- mark in Config.in that dependencies come from capnproto;
- add some newlines to .mk file;
- updated commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Email bounces:
<Qais.Yousef@imgtec.com>: host mxb-00376f01.gslb.pphosted.com[185.132.180.163]
said: 550 5.1.1 User Unknown (in reply to RCPT TO command)
Last mailing list postings date back to 2012.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A string transformation library that singularizes and pluralizes English
words, and transforms strings from CamelCase to underscored string.
Inflection is a port of Ruby on Rails' inflector to Python.
https://github.com/jpvanhal/inflection
Signed-off-by: John Faith <jfaith@impinj.com>
[Arnout: select unicodedata, add hash for license file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Email bounces:
<markos.chandras@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Last mailing list postings date back to 2015.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Python module providing bindings for the cairo graphics library.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Implements a native Python implementation of DBus for Twisted.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A protocol neutral RPC library that supports JSON-RPC and zmq.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides Python bindings for iptables.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides a simple cross-platform API for printing
colored terminal text.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the SolidRun Armada 8040 based Clearfog GT-8K. This
board has the same processor as the Macchiatobin, so we can reuse the
Macchiatobin U-Boot and image definitions.
The kernel fragment enables drivers that are necessary to make
networking ports work (SFP, Ethernet port, and Ethernet switch).
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mender-grubenv contains the boot scripts and tools used by Mender to
integrate with the Grub2 bootloader.
The user must select the following Grub modules for this package:
loadenv, hashsum, echo, halt, gcry_sha256, and test.
Because this patch also includes a grub version of fw_printenv and fw_setenv,
package/mender/Config.in must be changed as well at the same time, because if
both uboot-tools and this package are selected, during startup, mender calls
the uboot-tools version of fw_printenv and fails to start.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Mirza Krak <mirza.krak@northern.tech>
Acked-by: Mirza Krak <mirza.krak@northern.tech>
[Arnout:
- reorder depends clauses;
- add runtime tag to grub2 dependency
- remove wchar dependency from comment
- only error if BR_BUILDING
- use install instead of cp for a single file.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Force the build system to use python2 interpreter.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add docs/COPYING.MPL docs/copying.htm to the license files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libubootenv is a library that provides a hardware independent
way to access to U-Boot environment.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Matplotlib is a Python 2D plotting library
which produces publication quality figures
in a variety of hardcopy formats and interactive
environments across platforms.
More information is available at:
https://matplotlib.org/.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
[Peter: use Python-2.0 for license, fix license file, add host-pkgconf]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Creates a Cycler object much like cycler, but
includes input validation.
This package is required by matplotlib.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This basic skeleton is similar to skeleton-init-sysv.
All links in /var are same as in skeleton-init-sysv to be compatible
with current default filesystem scheme.
Exceptions:
* /dev/shm and /dev/pts dirs were removed, since they are created by
openrc devfs service
* /etc/fstab does not need /dev/shm, /dev/pts and /sys entries
becuse they are mounted by devfs and sysfs services respectively
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds openrc init system package. This performs default openrc
installation with openrc-init that acts as pid1.
MKPKGCONFIG=no:
openrc does not use pkg-config per se, if MKPKGCONFIG is enabled,
it will just install *.pc files on rootfs for other programs to
find librc and libeinfo. These libs expose C api to control openrc
(al rc-* functions use it). From the looks of it, these libs would
be usefull if user wanted to write his own programs to manage
services, and vast majority of people using openrc won't need it.
Also, that's the reason why there is not INSTALL_STAGING=yes.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Redis 5 now supports reproducible builds via SOURCE_DATE_EPOCH
* Add myself to DEVELOPERS for Redis
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a
2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided
through a Realtek RTL8189FTV (no mainline driver, not supported).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
enet will be used by supertuxkart 1.0.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Suricata is a free and open source, mature, fast and robust
network threat detection engine.
The Suricata engine is capable of real time intrusion
detection (IDS), inline intrusion prevention (IPS), network
security monitoring (NSM) and offline pcap processing.
https://suricata-ids.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
An autocompletion tool for Python that can be used for text
editors.
https://github.com/davidhalter/jedi
python-jedi is a runtime dependency of ipython 7.3.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add license for the flask theme]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Python Parser.
https://github.com/davidhalter/parso
python-parso is a runtime dependency of python-jedi
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: mention Python-2.0 and BSD-3-Clause in licenses]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Specifications for callback functions passed in to an API.
https://github.com/takluyver/backcall
No license source files are provided from current version, however
upstream added one:
https://github.com/takluyver/backcall/blob/master/LICENSE
python-backcall is a runtime dependency of python-inotify 7.3.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Andes 32-bit defconfig for AE3XX platform.
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
- fix commit title to match the defconfig name
- use the external toolchain package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new package for the Andes external toolchain for
the nds32 Little Endian architecture.
https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases/download/20180521/nds32le-linux-glibc-v3-upstream.tar.gz
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
- rename .mk and .hash files to carry the proper package name
- fix <pkg>_SITE variable, which was incorrect
- add prompt in Config.in
- add missing include of Config.in in toolchain/toolchain-external/Config.in
- add missing selects for RPC and SSP, since the toolchain supports
both
- drop BR2_TOOLCHAIN_EXTERNAL_URL option, the toolchain URL is
provided by the .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit provides basic support for the Andes 32-bit (nds32)
architecture.
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
- add missing Config.in comment
- add missing select BR2_PACKAGE_LIBDRM_INTEL, needed as the code
uses a header file installed only when libdrm-intel is enabled
- add patch to drop -fstack-protector in order to support toolchains
without SSP support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
- add missing Config.in comments
- fix minor nit in the _LICENSE variable
- add patch to drop hardening options, especially -fstack-protector,
which was causing the build to fail on toolchains without SSP
support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DaCapo benchmark suite is intended as a tool for Java benchmarking
by the programming language, memory management and computer
architecture communities.
Depends on the OpenJDK package for Java runtime environment.
Signed-off-by: Daniel J. Leach <dleach@belcan.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
--with-slang has to be given explicitly, otherwise the configure script
looks for slang.h in host directories.
Signed-off-by: Sven Oliver Moll <svolli@svolli.de>
[Arnout: add --with-slang config option]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LibHTP is a security-aware parser for the HTTP protocol and the related
bits and pieces.
https://github.com/OISF/libhtp
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: always disable SSP, let our gcc/wrapper handle that]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for Kodi 18.x-compatible version of kodi-screensaver-rsxs.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library and utility for TOTP based attestation using the tpm2-tss software
stack.
Add an upstream patch to fix format string mismatch errors when building for
32bit architectures.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I left DATACOM and will unlikely have access to the hardware required to
test the package.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current address will soon become invalid so drop it before the
messages start bouncing.
Change-Id: If631cedcaaa55d927d99b18ff299324e9d439cb0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Oniguruma is a modern and flexible regular expressions
library. It encompasses features from different regular
expression implementations that traditionally exist in
different languages.
https://github.com/kkos/oniguruma
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library for using PKCS#11, which includes an engine for OpenSSL that
lets it use PKCS#11 modules. Which is really what this package is
about, not that libp11 library itself, which has no users outside the
of OpenSSL engine.
If p11-kit is enabled, configure the engine to use that as the default
PKCS#11 module. That module is a sort of multiplexer that allows
multiple modules to be used at once, so it makes sense to use it even
if there are other modules present, e.g. softhsm2, nssckbi,
pkcs11-proxy, ykcs11, etc.
A host package is created too, with a host configuration option.
Since this a dynamically loaded module, there is no build time reason
to select it from a host package. It could be used by host openssl,
to allow host rauc to sign a software update bundle using a key from a
HSM with a PKCS#11 interface.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- add entry in DEVELOPERS file
- add missing !BR2_STATIC_LIBS dependency
- fix license information, as noticed by Frank Hunleth
- add missing dependency on host-pkgconf, needed by the configure
script to detect openssl
- explicitly pass --with-enginesdir as the value returned by
pkg-config is incorrectly prefixed by the sysroot]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
http://libcamera.org/
Cameras are complex devices that need heavy hardware image processing
operations. Control of the processing is based on advanced algorithms
that must run on a programmable processor. This has traditionally been
implemented in a dedicated MCU in the camera, but in embedded devices
algorithms have been moved to the main CPU to save cost. Blurring the
boundary between camera devices and Linux often left the user with no
other option than a vendor-specific closed-source solution.
To address this problem the Linux media community has very recently
started collaboration with the industry to develop a camera stack that
will be open-source-friendly while still protecting vendor core IP.
libcamera was born out of that collaboration and will offer modern
camera support to Linux-based systems, including traditional Linux
distributions, ChromeOS and Android.
The project has not made an official release as of yet, so we're
using the latest sha1 from master
We utilise C++ 11 but we mandate GCC5+ due to a bug [0] in earlier
versions which result in compile failures on our code base.
[0] Bug 54316 - [C++11] move constructor for stringstream
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54316
Documentation and Tests are disabled from the build.
With the following added to libcamera.config:
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_LIBCAMERA=y
./utils/test-pkg -c libcamera.config -p libcamera
br-arm-full [1/6]: SKIPPED
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: SKIPPED
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: SKIPPED
sourcery-arm [6/6]: SKIPPED
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- add missing Config.in comment
- remove empty newline at end of hash file
- adjust indentation of upstream URL in Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A bash-based automated testing system.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that the package has been removed, get-developers complains:
WARNING: 'package/lunit/' doesn't match any file
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add gettext-tiny package from the sabotage-linux project:
gettext-tiny provides lightweight replacements for tools typically used
from the GNU gettext suite, which is incredibly bloated and takes a lot
of time to build (in the order of an hour on slow devices). the most
notable component is msgfmt which is used to create binary translation
files in the .mo format out of textual input files in .po format. this
is the most important tool for building software from source, because it
is used from the build processes of many software packages.
Some files were taken from gettext-gnu (some po/* files and gettextize
script) to make possible perform gettextizing of packages.
The main purpose of gettext-tiny is to replace gettext for the "host" if
NLS support is not needed. There is no option to manually select
gettext-gnu or gettext-tiny, it is done automatically by virtual gettext
package. For the target gettext-tiny only installs gettext tool echo-wrapper
which might be called from shell scripts (i.e. ecryptfs-utils).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gst1-plugins-bayer2rgb-neon[1] is a gstreamer1 plugin which uses
bayer2rgb-neon library to decode raw camera bayer to RGB using NEON
hardware acceleration.
[1] https://git.phytec.de/gst-bayer2rgb-neon
Signed-off-by: Eloi Bail <eloi.bail@savoirfairelinux.com>
[Thomas:
- add entry to DEVELOPERS file
- add .hash file
- adjust Config.in to match bayer2rgb-neon
- add Config.in comment
- drop --prefix=/usr from CONF_OPTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bayer2rgb-neon[1] is a library which allows decoding raw camera bayer
to RGB using NEON hardware acceleration.
[1]: https://git.phytec.de/bayer2rgb-neon/
Signed-off-by: Eloi Bail <eloi.bail@savoirfairelinux.com>
[Thomas:
- use "config" instead of "menuconfig"
- use BR2_ARM_CPU_HAS_NEON instead of BR2_ARM_ENABLE_NEON
- use BR2_INSTALL_LIBSTDCPP instead of BR2_TOOLCHAIN_BUILDROOT_CXX
- add dependency on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9, because the code
is using C++11
- add missing Config.in comment
- drop --prefix=/usr from CONF_OPTS, it is passed by the
autotools-package infrastructure
- simplify CFLAGS logic
- move from "Applications" to "Libraries" in menuconfig
- add missing .hash file
- add entry in DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PyJWT is a Python library which allows you to encode and decode
JSON Web Tokens (JWT). JWT is an open, industry-standard (RFC 7519)
for representing claims securely between two parties.
https://github.com/jpadilla/pyjwt
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: bump to 1.7.1]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds a new package for brickd. Brickd is system management daemon
for the LEGO MINDSTORMS EV3 programmable brick.
Signed-off-by: David Lechner <david@lechnology.com>
[Thomas: add missing BR2_USE_MMU dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenSBI is a much improved alternative to BBL (riscv-pk). Add OpenSBI
support to buildroot.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- disable target installation, as we install nothing
- enable staging installation
- enable images installation only when needed
- improve the comment about the staging installation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Refik Tuzakli <refik.tuzakli@savronik.com.tr>
[Thomas:
- add missing dependency on BR2_TOOLCHAIN_HAS_GCC_BUG_64735 and
corresponding Config.in comment
- add missing dependency on BR2_INSTALL_LIBSTDCPP and update
Config.in comment
- add comment to explain why -DTHREADS_PTHREAD_ARG=OFF is passed in
CONF_OPTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 0bb0f2ba84, because
using "host-binutils" is not correct as it should only be used with
internal toolchains, and not external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-artifact is a host tool to generate update images
in the Mender artifact file format.
This package uses the binary archive from github because it bundles the
external dependencies.
Example usage:
$ mender-artifact write rootfs-image \
--update rootfs.ext4 \
--output-path rootfs.mender \
--artifact-name "release-v1.0.0" \
--device-type "beaglebone"
Above will generate a Mender artifact called "rootfs.mender"
containing the "rootfs.ext4" image along with meta-data.
One can read-out the meta-data with the following command:
$ mender-artifact read rootfs.mender
Mender artifact:
Name: release-v1.0.0
Format: mender
Version: 2
Signature: no signature
Compatible devices: '[beaglebone]'
Updates:
0000:
Type: rootfs-image
Files:
name: rootfs.ext4
size: 52428800
modified: 2018-08-27 09:10:55 +0200 CEST
checksum: e70b113fb0964a810a3043586eb4fc1c48e684ba78b02ba65fead4aa3e540d87
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
aiomonitor adds monitor and python REPL capabilities for
asyncio application.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asynchronous console and interfaces for asyncio.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generate simple tables in terminals from a nested list of strings.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a simple "Hello, World" integration test of the OpenJDK
package.
It compiles the Java app on the host, then runs it on an emulated
AARCH64 target and verifies "Hello, World" is printed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenJDK is a free and open-source implementation of the Java Platform.
This package provides the option to build a client or a server JVM
interpreter.
The default option is the server option, as that is what the majority
of users use. This JVM interpreter loads more slowly, putting more
effort into JIT compilations to yield higher performance.
Unlike most autotools packages, OpenJDK is exceptionally different and
has many quirks, some of which are below:
- X11, alsa, and cups are required to build Java, even if it's a headless build.
See
http://hg.openjdk.java.net/jdk10/jdk10/raw-file/tip/common/doc/building.html#external-library-requirements
for more information.
- host-zip is needed for the zip executable.
- There is no autogen.sh file, instead, a user must call "./configure
autogen."
- OpenJDK ignores some variables unless passed via the environment.
These variables are: PATH, LD, CC, CXX, and CPP.
- OpenJDK defaults ld to the ld binary but passes -Xlinker and -z as
arguments during the linking process, which causes linking failures.
To fix this issue, ld is set to gcc.
- Make -jn is unsupported. Instead, one must use the "--with-jobs="
configure option, and use $(MAKE1).
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas:
- drop explanations about CC, LD, CXX, etc. be set to their "actual
binaries" instead of ccache: TARGET_CC/TARGET_LD/TARGET_CXX point
to the compiler wrapper, so the usage of ccache is hidden
- make sure at least one of the variants is enabled in Config.in
- drop the submenu for variant selection
- use system zlib instead of the bundled one. This works fine when
BUILD_SYSROOT_CFLAGS and BUILD_SYSROOT_LDFLAGS are passed
- fix minor nits in the Config.in comments]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prelink-cross emulates a runtime linker for a given sysroot. This is
necessary to allow gobject-introspection to build it's typelib files
during cross-compiling.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: drop Config.in.host file and visible option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library was previously a part of sunxi-mali.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package sunxi-mali-mainline is available for recent kernels.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python library to scan and decode advertised BLE info.
Uses asyncio.
https://github.com/frawau/aioblescan
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.
On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/165766194
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OP-TEE performance benchmark tools for the OP-TEE project.
This packages generates embedded Linux based OS materials used
to retrieve execution timing information on invocation of the
OP-TEE secure services.
It is added next to the OP-TEE client package in BR configuration.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate the dependency of optee-client]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE test package provide test materials as part of the OP-TEE
project helping platforms to verify their OP-TEE components
against a set of regression and performance tests.
Package is added in the BR package configuration next to the
OP-TEE client package.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0 with an added patch to fix an issue
reported by recent GCC toolchains.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate !BR2_STATIC_LIBS dependency of optee-client
- make sure BR2_TARGET_OPTEE_OS_SDK is selected
- use a patch generated by git format-patch
- simplify the construct to build the examples]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package generates embedded Linux based OS userland client
applications and OP-TEE OS trusted applications all embedded in the
file system. These applications shows how to use the APIs OP-TEE OS is
based on, both in the non secure and secure worlds.
Package is added next to the OP-TEE client package in the BR package
configuration.
This change references in Buildroot the today's latest OP-TEE revision
release tagged 3.4.0 with an added patch to fix an issue reported by
recent GCC toolchains.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate !BR2_STATIC_LIBS dependency of optee-client
- make sure BR2_TARGET_OPTEE_OS_SDK is selected
- use a patch generated by git format-patch
- simplify the construct to build the examples]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE client API library and supplicant daemon from the
OP-TEE project are packaged in package/optee-client. An init script
launches the tee-supplicant deamon. Package is added to the
Security menu of BR configuration.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- remove version selection
- add dependency on !BR2_STATIC_LIBS, as it unconditionally builds a
shared library]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Here is the list of the changes compared to the removed mongodb 3.3.4
version:
- Remove patch (not applicable anymore)
- Add patch (sent upstream) to fix openssl build with gcc 7 and
-fpermissive
- Remove 32 bits x86 platforms, removed since version 3.4:
https://docs.mongodb.com/manual/installation/#supported-platforms
- Change license: since October 2018, license is SSPL:
- https://www.mongodb.com/community/licensing
- https://jira.mongodb.org/browse/SERVER-38767
- gcc must be at least 5.3 so add a dependency on gcc >= 6
- Add a dependency on host-python-xxx modules:
https://github.com/mongodb/mongo/blob/r4.0.6/docs/building.md
- Use system versions of boost, pcre, snappy, sqlite, yaml-cpp and zlib
instead of embedded mongodb ones
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
[Thomas:
- add missing depends on BR2_HOST_GCC_AT_LEAST_4_8
- improve comments on depends on
- add missing "comment" for toolchain dependencies
- add missing "depends on BR2_PACKAGE_WPEWEBKIT_ARCH_SUPPORTS" on the
Config.in comment
- add missing "select BR2_PACKAGE_WAYLAND", which is needed to select
BR2_PACKAGE_WAYLAND_PROTOCOLS
- fix typoes in the JIT enabling code that was using
WEBKITGTK_CONF_OPTS instead of WPEWEBKIT_CONF_OPTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS is maintained by the OP-TEE project. It provides an
open source solution for development and integration of secure
services for Armv7-A and Armv8-A CPU based platforms supporting
the TrustZone technology. This technology enables CPUs to
concurrently host a secure world as the OP-TEE OS and a non-secure
world as a Linux based OS.
The OP-TEE project maintains other packages to leverage OP-TEE on
Linux kernel based OSes. An OP-TEE interface driver is available
in the Linux kernel since 4.12 upon CONFIG_OPTEE.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
https://www.op-tee.org/https://github.com/OP-TEE/optee_os
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- pass CFG_ARM32_core=y when building for ARMv7, otherwise the build
fails
- add a check that verifies that BR2_TARGET_OPTEE_OS_PLATFORM is not
empty
- minor formatting fixes/adjustements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Paradoxically, building OpenJDK requires a pre-existing JDK. This
pre-existing JDK is called the "boot JDK."
The boot JDK for building JDK major version N should be a JDK of major
version N-1, so for building JDK11, JDK10 would be needed. This
requirement is an issue when building on most distributions, as the
host JDK tends to be JDK8.
The AdoptOpenJDK project provides binaries that can act as the boot
JDK to build the target JDK, which is what this package provides.
Currently, only a x86_64 host is supported, for two reasons:
1) A 32bit x86 binary distribution is not available from AdoptOpenJDK
2) We didn't had access to a host machine using an architecture other
than x86-64
The provided unpack200 has an invalid RPATH and relies on libzlib.
When host-libzlib runs the install step, the following error is
generated:
*** ERROR: package host-libzlib installs executables without proper RPATH:
*** $(HOST_DIR)/bin/unpack200
Because unpack200 is a deprecated tool, removing it after installation
is safe and fixes the issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas:
- fix comments in the code
- use the more usual "cp -dpfr" command to copy files over]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configuration contains:
- building tpl, spl and u-boot (forked u-boot repository)
- booting from SD card and network via PXE
- working ethernet, usb and uart
- minimal rootfs with busybox
- ready to flash SD card image
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tool which allows to setup broadcom bluetooth
device via UART.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The qtuio package uses the obsolete qt4 package, which we are about to
remove, so remove qtuio as well.
CC: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The python-pyqt package uses the obsolete qt4 package, which we are about to
remove, so remove python-pyqt as well.
CC: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package adds NXP Layerscape and QoriQ reset config word
(RCW) / pre-bootloader (PBL) generation support.
The RCW is used to setup clocking and IO allocations and then launches
the next stage of boot (usually u-boot).
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GstShark leverages GStreamers newest instrumentation subsystem by
installing a set of custom hooks to the trace points. A variety of
data analytics are extracted and presented to the user in a graphical,
friendly way.
https://developer.ridgerun.com/wiki/index.php?title=GstSharkhttps://github.com/RidgeRun/gst-shark
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: João Victor Oliveira <jv.oliveirag@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Igor Miranda <igorcmiranda3110@gmail.com>
[Thomas:
- fix package prompt to be gtk1-shark in Config.in
- license is LGPL-2.1+, not LGPL-2.1
- add entry to DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A free media server.
Stream your media to devices on your home network.
https://gerbera.io
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- fix S99gerbera to be compliant with the init script pattern
that was recently put in place
- add -l option in init script for logging
- license code is GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/afd/afdc598b80356a8301d890232466de421f7779d5/
Luacrypto fails to build with openssl 1.1.x. The package has not seen any
functional changes since it was added in 2013 and has no reverse
dependencies.
The upstream repository (https://github.com/starius/luacrypto) explicitly
states:
this project is deprecated, use luaossl
So remove the package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Utility for testing pluggable authentication modules (PAM) facility.
While specifically designed to help PAM module authors to test their
modules, that might also be handy for system administrators interested
in building a centralised authentication system using common standards
such as NIS, SASL and LDAP.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Peter: drop spelling fix patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This tool is used to send commands to imx6 based hardware using NXP's
UTP protocol.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a set of tools to manipulate RTC devices. They
are written and maintained by the RTC subsystem Linux kernel
maintainer, Alexandre Belloni.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a package for 'shim', an EFI bootloader for secure
boot chain loading.
While gnu-efi supports 32bit ARM, this is currently broken in shim.
Patches to fix this have been submitted upstream but are not included
here for now.
https://github.com/rhboot/shim/pull/162
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS, add separate depends
on to exclude ARM32 build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the Entertainment Arts Standard Template Library.
The initial version uses the latest hash so that the aarch64 support
is included vs Buildroot having to apply the aarch64 support patch.
Signed-off-by: Maury Anderson <maury.anderson@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add missing BR2_INSTALL_LIBSTDCPP dependency
- use the github helper instead of the git site method, and adjust
hash consequently
- drop INSTALL_TARGET_CMDS, the default cmake-package implementation
works fine]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ilya Averyanov <averyanovin@gmail.com>
[Thomas:
- add missing dependencies on expat and zlib
- add missing depends on C++ and dynamic library support, and the
corresponding Config.in comment
- add the missing entry to the DEVELOPERS file
- add the missing hash for the license file
- adjust indentation in the Config.in file
- use --disable-unittest instead of --enable-unittest=no.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address is no longer valid. Sending an e-mail to this
address says (yes, the actual text is in French):
Veuillez prendre note que cette adresse n'est plus valide à la suite du départ de l'employé.
which means:
Please take note that this address is no longer valid following the employee departure.
Therefore, it does not make sense to list Sebastien in our DEVELOPERS
file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vicente is no longer working at Imgtec, and his e-mail is now
bouncing:
<Vincent.Riera@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Lite2 board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi One Plus board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libpagekite is a C implementation of the backend of the PageKite relay
protocol. It allows external access to embedded devices without public
IP address.
There is a bundled version of libev but we prefer to use the global
libev library.
Although the configure script has a --without-openssl option, it
doesn't actually build without openssl.
Patch 0001-configure.ac-fix-handling-of-with.patch is needed because
we want to explicitly pass --with and --without options, even if they
are the default. The way the AC_ARG_WITH macros were used, --with and
--without both had the effect of enabling the option.
Patch 0002-configure.ac-use-AS_HELP_STRING-for-with-openssl.patch is
not needed for Buildroot, but it is part of the same upstream PR and
would generate a conflict for the next patch.
Patch 0003-configure.ac-use-pkg-config-for-openssl.patch is needed to
pass -lz (needed by openssl) in static compilation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
[Thomas:
- As noticed by Romain Naour, fix the prompt of the package in the
Config.in
- Add entry to DEVELOPERS file
- Drop the dependency on BR2_bfin, since this architecture has been
dropped from Buildroot.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- rename BR2_PACKAGE_NETSURF_FRAMEBUFFER to BR2_PACKAGE_NETSURF_SDL,
and use "sdl" everywhere instead of "framebuffer", since really SDL
can display on something else than the framebuffer
- use a "depends on BR2_PACKAGE_LIBGTK2" instead of a "depends on
BR2_PACKAGE_XORG7 + many other depends on + select
BR2_PACKAGE_LIBGTK2"
- use PKG_CONFIG_HOST_BINARY for the pkg-config path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jobs scheduler for managing background task (asyncio).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Control remote side information.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security for aiohttp.web.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Server-sent events support for aiohttp.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sessions for aiohttp.web.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erico Nunes recently contributed this defconfig, we can safely assume
he is willing to maintain it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lothar contributed this board not long ago, so let's assume he is
willing to take care of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail @rockwellcollins.com is bouncing:
<bryan.brinsko@rockwellcollins.com>: host
mail05.rockwellcollins.com[205.175.227.28] said: 550 #5.1.0 Address
rejected. (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tool allows to verify if the OpenCL environment is set up correctly
and provides information related to the supported OpenCL platforms.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
[Thomas:
- use the libopencl virtual package
- add LICENSE to the license files]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A flexible forms validation and rendering library for
Python web development.
https://wtforms.readthedocs.io/
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libtorrent is a feature complete C++ bittorrent implementation
focusing on efficiency and scalability.
https://www.libtorrent.org/
Signed-off-by: Philipp Richter <richterphilipp.pops@gmail.com>
[Thomas: license is BSD-3c, not BSD-2c]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mini SNMPd is a minimal implementation targeted at small or embedded
UNIX systems with limited resources.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
[Thomas: add hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a core Perl module (ie. included in the Perl distribution), so
there is no point in having a separate package for it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Robert Rose <robertroyrose@gmail.com>
[Thomas:
- add missing Config.in dependencies inherited from
BR2_PACKAGE_PROTOBUF, as well as the corresponding Config.in
comment
- replace spaces by tabs in grpc.mk indentation
- remove superfluous GRPC_SOURCE variable
- improved patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fail2ban scans log files (e.g. /var/log/apache/error_log)
and bans IPs that show malicious behaviours.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas: simplify $(SED) expression by using comma as a separator
instead of slash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Peter: fix alphabetical ordering as suggested by Ryan]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
paho-mqtt-c 1.3.0 is the current stable version of paho-mqtt-c.
The patch 0001-Declare-mqtt-tests-as-a-C-only-project.patch is no longer
required, a similar fix was applied upstream with:
a87450ebcefed573ad4cdac77e2c893a3c314762.
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cChardet is high speed universal character encoding detector.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Simple DNS resolver for asyncio.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am now maintaining / submitting regular patches for the Go toolchain as well.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tiago is leaving the company and is unlikely to have access to the hardware
required to test the package.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Having a host variant of this package is useful to create f2fs
filesystem images.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas: add explicit --without-blkid and --without-selinux options,
following the review from Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds davici which is an alternative implementation of the
VICI client protocal used by Strongswan. It targets better integration
with software stacks and uses a asynchronous, non-blocking API that can
be integrated in third-party main dispatching loops without the use of
threads.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
[Thomas: fix license, it's LGPL-2.1+, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Amarula A64-Relic board
with below features:
- U-Boot 2018.07
- Linux 4.17.0-rc6
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y and
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Header files from bluez utils version 5.x.
Separated headers are required to break circular dependencies
when python3 is built with bluetooth support.
This is a blind option, it will be automatically selected by python3
when bluez5_utils is enabled.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: add comment to keep versions in sync; make it a blind option]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch provides support for the board Odroid XU4. It uses a recent
4.14 kernel released by Hardkernel, and the current u-boot 2017.05
also from Hardkernel.
Signed-off-by: Pierre CROKAERT <pct@crookies.net>
[Thomas:
- Update DEVELOPERS file
- Update .gitlab-ci.yml file
- Simplify the boot.ini script
- Add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14 option
- Add BR2_PACKAGE_HOST_DOSFSTOOLS and BR2_PACKAGE_HOST_MTOOLS since a
VFAT filesystem is generated
- Keep the default root filesystem size, since it is sufficient.
- Reduce the size of the VFAT filesystem]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nss-myhostname is helpful to resolve local hostname without domain.
For instance, if we set hostname to myboard and ping myboard
without .local suffix, it fails if /etc/hosts stays unchanged.
nss-myhostname modifies /etc/nsswitch.conf file.
It set myhostname resolution just after files in hosts line,
for example:
hosts: files myhostname mdns4_minimal [NOTFOUND=return] dns
This choice comes from Debian commit [1] and Yocto recipe [2].
Also, nss-myhostname author suggests myhostname should be used as
a backup and appended at the end of hosts line. Both choices are valid.
Discussion on Debian bug tracker [3] gives some details on issue
that may occurs using nss-myhostname (see fqdn).
Note nss-myhostname is already included in systemd, so ensure is conflicts
with it.
[1] http://git.nomeata.de/?p=libnss-myhostname.git;a=commit;h=5104d7f0045df55ee8be526e8c84078750e1e0ed
[2] https://git.yoctoproject.org/cgit.cgi/poky/plain/meta/recipes-support/nss-myhostname/nss-myhostname_0.3.bb
[3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=756224
[Peter: simplify sed invocation, adjust Config.in]
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-package that is able to shorten the load time of entry_points declared
in setup.py of python packages.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides libclc, an open source implementation of the
library requirements of the OpenCL C programming language, as
specified by the OpenCL 1.1 Specification. It is intended to be used
with Clover (Mesa3D's OpenCL implementation for AMD GPUs.
It needs to be compiled with host-clang, as it generates LLVM IR bitcode
files containing device builtin functions for each target.
Currently, libclc supports AMDGCN, R600 and NVPTX targets.
As OpenCL kernels can be built dynamically on the target using libclang and
libLLVM, it is necessary to have clc headers installed on the target. Buildroot
removes /usr/include in its target-finalize step, so clc headers are installed to
/usr/share/clc.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
[Thomas:
- fix license information as noticed by Romain
- add comment to explain why --includedir=/usr/share is used]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the same toolchain that was previously distributed by Linaro. [1]
Switch default toolchain as this toolchain supersed the Linaro AArch64-BE toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the same toolchain that was previously distributed by Linaro. [1]
Switch default toolchain as this toolchain supersed the Linaro AArch64 toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.
Tested with qemu_aarch64_virt_defconfig.
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the same toolchain that was previously distributed by Linaro. [1]
Switch default toolchain as this toolchain supersed the Linaro ARM toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.
Tested with qemu_arm_vexpress_defconfig.
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cryptographic library for Python
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[Thomas: adjust license information, it's not under Apache-2.0, but a
combination of BSD-2-Clause, Public Domain and OCB License.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds the libcorrect package. Libcorrect by default builds a shared
library, so require shared libraries. We add a patch to make sure
-Wpedantic is only used if supported by the C compiler (gcc < 4.8
didn't support it).
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add a patch to use -Wpedantic only if available, instead of
depending on gcc >= 4.8.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
waffle has four "backends", each having their own dependencies.
At least one "backend" must be enabled, otherwise Waffle will refuse to
build. The "backends" are:
- glx, which needs full OpenGL + x11-xcb
- wayland, which needs wayland-client, wayland-egl and EGL
- x11-egl, which needs x11-xcb and EGL
- gbm, which needs gbm, libudev and EGL
Backport an upstream patch fixing a build issue with musl toolchains.
Add a new patch fixing build with Wayand without X11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: drop GLES dependency, it is not mandatory.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No license file was found in the repo and README.md seems
to be the closest (license type was mentioned in setup.py).
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[Thomas: use the right SPDX license tag.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pigpio is a Python module for the Raspberry Pi
which talks to the pigpio daemon to allow control
of the general purpose input outputs (GPIO).
http://abyz.co.uk/rpi/pigpio/python.html
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas: use proper SPDX license tag]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pigpio is a library for the Raspberry Pi which allows
control of the General Purpose Input Outputs (GPIO).
http://abyz.me.uk/rpi/pigpio/
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas:
- Use proper SPDX tag for The Unlicense
- Add missing dependency on !BR2_STATIC_LIBS, since the Makefile is
unconditionally building a shared library
- Use BR2_arm instead of BR2_ARM_EABIHF, there's nothing that makes
it EABIHF specific.
- Use -D and full destination paths during the installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BIRD project aims to develop a dynamic IP routing daemon with full
support of all modern routing protocols, easy to use configuration
interface and powerful route filtering language
Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
[Thomas:
- Do not make ncurses/readline mandatory dependencies, since they are
not. They are only needed when building the BIRD client. Added a
Config.in sub-option to enable/disable the client. As part of this,
added ncurses/readline to <pkg>_DEPENDENCIES.
- Add a patch to fix the installation when the BIRD client is
disabled, the patch has been submitted upstream.
- Added host-flex and host-bison to <pkg>_DEPENDENCIES since
flex/bison are used during the build process.
- Add BR2_USE_MMU dependency, the code uses fork()
- Fix alphabetic ordering in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In a private e-mail, Nathan said he no longer has the time to work on
this package, and would like to be removed from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
HAProxy is a free, very fast and reliable solution offering
high availability, load balancing, and proxying for TCP and
HTTP-based applications.
http://www.haproxy.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add RISC-V 64-bit defconfig for QEMU virt machine.
Tested with QEMU 2.12.1
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the RISC-V Proxy Kernel (pk) package which provides the Berkeley
Boot Loader for booting RISC-V kernel images.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- fix prompt of option to be just "riscv-pk"
- add blank line between help text and upstream URL in Config.in file
- use $(INSTALL) instead of cp to install the generated image]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This enables a riscv64 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This configuration has been used to successfully build a qemu-bootable
riscv-linux-4.15 kernel (https://github.com/riscv/riscv-linux.git).
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- simplify arch.mk.riscv by directly setting GCC_TARGET_ARCH
- simplify glibc.mk changes by using GLIBC_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The pyasn1 library implements ASN.1 support in pure-Python.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A library for automatically generating command line interfaces.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Resurrect support for RIoTboard after 2018.02.x deprecation.
Signed-off-by: Nikolay Dimitrov <nikolay.dimitrov@retrohub.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Files list maintained by me in DEVELOPERS file is not
in proper order, fix it with ascending order.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Files list maintained by me in DEVELOPERS file is not
in proper order, fix it with ascending order.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Duktape is an embeddable Javascript engine, with a focus on
portability and compact footprint.
Duktape is easy to integrate into a C/C++ project: add duktape.c,
duktape.h, and duk_config.h to your build, and use the Duktape API
to call Ecmascript functions from C code and vice versa.
http://www.duktape.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add my entry for expat, libv4l and minizip
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
An unladen web framework for building APIs and app backends.
http://falconframework.org
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas: add missing _LICENSE variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This module provides basic functions for parsing mime-type names
and matching them against a list of media-ranges.
https://github.com/dbtsai/python-mimeparse
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bumps of perl-crypt-openssl-random and
perl-crypt-openssl-rsa, only host-package is needed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds host-checksec package support. This tool provides a
script to offline check the properties of a security hardened elf file.
REF: https://github.com/slimm609/checksec.sh
Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch added 'openresolv' package support. This tool
provides a dns management framework to track currently
available nameservers.
A key feature of this tool vs resolvconf is the ability to
manage multiple name server input configuration files and
generate the /etc/resolv.conf. This is handy when you have
multiple dynamic communication paths providing nameserver
information.
REF: https://github.com/rsmarples/openresolv
Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tini is a minimal init process to act as PID 1 for containers.
Note: it is not necessary to compile Tini statically for many
non-docker container environments, and Docker now statically links to
Tini internally (as of 1.13).
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: license is not "bsd", but some variant of MIT.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: use SPDX tag for license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A useful tool for managing and installing python packages.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds support the Xilinx ZCU106 development board.
[Tested on the ES2 (Engineering Sample 2) version of the board]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nghttp2 is an implementation of HTTP/2 and its header
compression algorithm HPACK in C.
Signed-off-by: Michaël Burtin <michael.burtin@netgem.com>
Signed-off-by: Anisse Astier <anisse.astier.ext@netgem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove the following packages from myself:
* bctoolbox
* libshout
* mp4v2
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A C++ Web Framework built on top of Qt, using
the simple approach of Catalyst (Perl) framework.
Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
[Thomas: add entry in DEVELOPERS file, move cmake-package invocation
to the end of .mk file, select BR2_PACKAGE_OPENSSL.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds the capnproto package. This also builds a host variant to generate
the capnp compiler that can be used to compile message definitions into
C++ code. Includes a patch from upstream to fix an issue with uclibc.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: only link with -latomic when BR2_TOOLCHAIN_HAS_LIBATOMIC=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig for the Olimex A10-OLinuXino-LIME, reusing most
of the A20-OLinuXino-Lime and A13-OLinuXino files (sym links).
The configurations for Olimex A10-OLinuXino-LIME feature:
- U-Boot 2018.03
- Mainline Linux kernel 4.14.26
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
[Arnout: remove commented-out BR2_ARM_EABIHF=y (which is default)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A parallel implementation of gzip for modern
multi-processor, multi-core machines.
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas: add entry to DEVELOPERS file, add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
KDE Frameworks 5 is a set of libraries built on the Qt framework
providing a lot of powerfull classes and solutions for developers
building Qt applications.
Unlike the previous KDE libraries, they are split in tiny packages,
reducing dependencies as much as possible, making them usable even for
embedded projects.
This first commit introduce the kf5 packages folder.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- Needs Qt >= 5.8, so added a dependency on
BR2_PACKAGE_QT5_VERSION_LATEST
- Update to version 5.47.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move all entries from Sven Neumann under his new e-mail address.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sven Neumann <neumann@teufel.de>
[Thomas:
- add entry to DEVELOPERS file
- add missing dependency on BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- rework comments on the dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dehydrated is an ACME client written in bash. It should be able to run
under zsh as well, but this hasn't been tested so it isn't enabled for
now.
Normally, we would want an init script to start dehydrated, and an
example configuration file. However, it is very difficult to do this
in a generic way in Buildroot:
- we normally don't have cron running;
- we have no standard location for webroot;
- we have no standard location for certificates;
- we have no standard way to restart/reload the webserver.
So instead, provide brief documentation of how to use dehydrated in the
help text.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas: drop unneeded AT_SPI2_ATK_INSTALL_STAGING_OPTS variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- drop host-meson dependency, unneeded since the meson-package
infrastructure is used
- add -Ddbus_daemon=/usr/bin/dbus-daemon, otherwise at-spi2-core
meson build system tries to find dbus-daemon on the host machine,
where it may not be available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
davfs2 is a Linux file system driver that allows to
mount a WebDAV resource. WebDAV is an extension to HTTP/1.1
that allows remote collaborative authoring of Web resources.
[Peter: Add patch to drop -fstack-protector-strong and update dependencies,
Not available on musl and nommu, fixup .hash file comments,
Fix _SITE and drop autoreconf, update DEVELOPERS]
Signed-off-by: Roman Gorbenkov <roman.gorbenkov@ens2m.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add my entry to json-c, libsoup, libsoxr, libxslt and tinymembench
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Emails bounce. The domain does not resolve.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I'm working on improving the sysvinit scripts, so it's advisable to keep
an eye on them.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add mender, an open source over-the-air (OTA) software
updater for embedded Linux devices.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas:
- add entry to DEVELOPERS file.
- drop dependency on systemd, since there is really no build
dependency, it's just that the init script integration is missing.
- add Config.in comment about the thread dependency
- don't override install commands, otherwise the mender binary is not
installed, and instead use a post install target hook.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds flatcc as a new package, pulling v0.5.1 from github. flatcc
has both a host tool (the compiler), and libraries for the target.
Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com>
Signed-off-by: Joel Carlson <joel.carlson@cosmicaes.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Shadowsocks-libev is a lightweight secured SOCKS5 proxy for
embedded devices and low-end boxes.
https://github.com/shadowsocks/shadowsocks-libev
Signed-off-by: Min Xu <xuminready@gmail.com>
[Thomas:
- drop patch adding license file for libipset
- drop --disable-documentation, it's passed by autotools-package
- add entry in DEVELOPERS file
- pass --disable-ssp because the SSP check uses AC_COMPILE_IFELSE()
so with some toolchains, it think SSP support is available, while
it's not. And anyway we want SSP to be controlled by Buildroot
global options, not on a per-package basis.
- add depends on BR2_USE_MMU, because the code uses fork().]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a new infrastructure to ease the development of packages that use Meson as
their build system.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- move global variables definition outside of the inner-meson-package
macro
- for consistency, remove double quote around value passed to meson
in the host configure step.
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Corkscrew is a tool for tunneling SSH through HTTP proxies
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas: add hash for license file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are moving from datacom.ind.br to datacom.com.br. The old domain will
still be valid for an undefined period (probably forever).
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
[Thomas:
- Do not select BR2_PACKAGE_ZLIB, because zlib is an optional
dependency.
- Handle optional dependencies in a more usual way in libgit2.mk:
group the addition in _DEPENDENCIES and in _CONF_OPTS for a given
library together.
- libgit2 can optionally use libssh2, not libssh.
- Add the optional dependency on zlib.
- Always pass USE_ICONV=ON, the detection works perfectly fine, with
both a C library providing iconv support built-in, and with
libiconv. If neither provides iconv, it gets disabled automatically
as expected.
- Add libiconv as an optional dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libidn2 is an implementation of the IDNA2008 + TR46
specifications (RFC 5890, RFC 5891, RFC 5892, RFC 5893,
TR 46).
http://www.gnu.org/software/libidn/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Use positive logic to test the BR2_PACKAGE_LIBIDN2_BINARY
condition.
- Put the definition of LIBIDN2_REMOVE_BINARY inside the
BR2_PACKAGE_LIBIDN2_BINARY condition, as suggested by Arnout.
- Adjust license details: library is under GPL-2.0+ or LGPL-3.0+,
while the command line tool is under GPL-3.0+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libopusenc library provides a high-level API for encoding opus audio files
and live streams.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add missing select on opus in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Merge my two entries in the DEVELOPERS file, because the mail address
<sven.haardiek@greenbone.net> is outdated.
Signed-off-by: Sven Haardiek <sven.haardiek@iotec-gmbh.de>
[Thomas: fix alphabetic ordering.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Freescale specific alsa-lib plugins for the i.MX processor family.
For now, the only provided plugin is:
* Rate Converter Plugin Using Freescale ASRC Resampler
The ASRC hardware resampler can be found on i.MX53 and most i.MX 6
processors.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- Remove the mention "This package is provided by Freescale as-is and
doesn't have an upstream." from the Config.in help text, since
according to Gary Bisson, there is a Git repository for such
projects, and therefore some form of upstream.
- Add missing entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
InfluxDB client.
Signed-off-by: Sven Haardiek <sven.haardiek@iotec-gmbh.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: as suggested by Yegor, add entry in the DEVELOPERS file, and
fix commit title.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The VTE package contains a termcap file implementation for
terminal emulators.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: fix encoding of license name.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: use BUILD_SHARED, BUILD_STATIC and INSTALL_STATIC options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides Clang tools and libraries for the host and
libclang for the target.
host-clang is needed to build libclc, which is provided in a follow-up
patch.
We need libclang for the target because it is used by most of OpenCL
implementations.
A later patch in this series will enable Clover, the OpenCL
implementation part of Mesa3D, which requires libclang.
clang-tblgen must be copied to HOST_DIR as it is not installed by
default but is needed for cross-compilation:
http://lists.llvm.org/pipermail/cfe-dev/2015-June/043318.html
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- Add Config.in comment about BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- Minor reformatting/rewrapping of comments in .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A backport of the Python 3 subprocess module for use on Python 2.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A tiny library to facilitate visitor implementation in Python
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library to enable your code run as a daemon process on Unix-like
systems.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the same version as tcl package.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The email address of Philipp Claves bounces.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
configure.ac can fail the build when there's no dynamic library support,
since it cannot find dladdr which is needed only when we have libunwind.
Therefore, configure.ac was patched to check for dladdr only in the libunwind
check section. As a consequence of the patch, ZEROMQ_AUTORECONF was set.
The patch was applied to the zeromq master branch, see:
c971445025
Fixes:
http://autobuild.buildroot.net/results/2b1aaf7e35651f04a9e9d0269e49c1b0bd87ae29/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pixie WPS is a C based tool to audit networks against so called "Pixie
Dust" attacks.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- fix license, it's GPL-3.0+
- use PREFIX= instead of prefix= to actually have an effect, and
install in /usr and not /usr/local
- remove reference to PIXIEWPS_SUBDIR, which was never defined, and
was not needed anyway]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reaver is a tool to audit networks against brute WPS pins attacks.
We use the github.com/t6x fork at the moment because other
versions/repos of this project won't cross-compile, and this fork is
the only one regularly updated and maintained.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Eugene is project lead of Eclipse TCF project
Signed-off-by: Eugene Tarassov <eugene@largest.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package add support for imx-mkimage for iMX8M.
Currently the only hardware it's tested for.
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a kernel module from Intel, which could only be
used together with Intel userspace tools provided under NDA, which
also come with the same kernel module. The copy of the kernel module
available on SourceForge is only provided to comply with the GPLv2
requirement. Intel engineers were even surprised it even built and
were not willing to make any effort to fix their tarball naming to
contain a version number. Therefore, it does not make sense for
Buildroot to provide such a package.
See https://sourceforge.net/p/e1000/bugs/589/ for the discussion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove double "only" noticed by Carlos
- fix typo packaged -> package noticed by Romain
- fix check-package warning noticed by Ricardo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Psycopg is the most popular PostgreSQL database adapter for the Python
programming language. Its main features are the complete implementation of the
Python DB API 2.0 specification and the thread safety (several threads can
share the same connection). It was designed for heavily multi-threaded
applications that create and destroy lots of cursors and make a large number of
concurrent INSERTs or UPDATEs.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch installs LLVM tools and libraries for the host and
libLLVM.so for the target.
In order to cross-compile LLVM for the target, LLVM
must be installed on the host, or at least llvm-tblgen.
This is necessary as the path to host's llvm-tblgen must
be specified when cross-compiling using the LLVM_TABLEGEN option.
Also, a version of llvm-config that can run on the host will
be required by packages that link with LLVM libraries, so we
need to generate it and install it in STAGING_DIR/usr/bin.
It is important to remark why we need llvm-config(host variant)
installed in STAGING dir. This tool is necessary to build
applications that use LLVM, as it prints the compiler flags,
linker flags and object libraries needed to link against LLVM libs.
More info: https://bugs.chromium.org/p/chromium/issues/detail?id=219369
The original idea was to compile only llvm-tblgen and llvm-config
for the host, as they are the only necessary components. However,
llvm-config tool does not work as expected if it is not linked with
libLLVM.so, so we must also enable LLVM_LINK_LLVM_DYLIB, what builds
LLVM as a single shared library and links LLVM tools with it.
More info: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224847
in comment #11.
If we don't build full LLVM for the host, it would be necessary to
patch configure.ac from mesa3d if we want dynamic linking, because it
uses llvm-config (host variant installed in STAGING_DIR) to get the
necessary LLVM libraries to link with, which has the following problems:
- llvm-config --shared mode outputs static (even if LLVM is built as
one shared library) which leads to link issues with libgallium.
- llvm-config --libs outputs all LLVM tiny libs: -lLLVMLTO,
-lLLVMPasses,etc instead of the single shared library containing
all LLVM components (-lLLVM-5.0)
Mesa tries to execute: llvm-config --link-shared --libs, but this outputs
llvm-config: error: libLLVM-5.0.so is missing.
Given that these problems may arise with other packages that use LLVM,
it is preferable to do a full build for the host. Also, having a
complete installation of LLVM on the host will also facilitate the
integration of Clang front-end, which is going to be added in a future
patch.
As option LLVM_BUILD_LLVM_DYLIB is enabled for the llvm target variant,
a single shared library containing all LLVM components is built.
This option is not compatible with BUILD_SHARED_LIBS, which generates
one .so per library and is only recommended for use by LLVM developers.
Tools and utils are not built for the target. The patch aims to provide
LLVM support for other packages.
The main options needed to cross-compile LLVM are the following ones:
LLVM_TABLEGEN
CMAKE_CROSSCOMPILING
LLVM_DEFAULT_TARGET_TRIPLE
LLVM_HOST_TRIPLE
LLVM_TARGET_ARCH
LLVM_TARGETS_TO_BUILD
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- add dependency on thread and C++ and update the Config.in comment
accordingly.
- make the Config.in comment depend on BR2_PACKAGE_LLVM_ARCH_SUPPORTS
so that it isn't disabled on architectures where LLVM is anyway not
supported.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A backport of the `yield from` semantic from Python 3.x to Python 2.7.
Can be useful for both host and target packages.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding basic support modeled after the Freescale/NXP T1040RDBD4 board.
This target is used to support testing of the bootlin e5500 toolchain.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
i2pd (I2P Daemon) is a full-featured C++ implementation of I2P
client.
I2P (Invisible Internet Protocol) is a universal anonymous
network layer.
All communications over I2P are anonymous and end-to-end
encrypted, participants don't reveal their real IP addresses.
http://i2pd.website
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Add third patch to not install the license file in /usr/LICENSE and
the source code in /usr/src instead of using a post-install-target
hook to remove /usr/LICENSE and /usr/src. Indeed, we're not sure if
/usr/src contains only stuff installed by this package.
- Clarify the comment that explains why -DTHREADS_PTHREAD_ARG=OFF is
passed, especially because it's only needed for older versions of
CMake, and causes a warning with newer versions of CMake.
- Propagate architecture dependencies to the Config.in comment about
the exception_ptr requirement.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CD paranoia on top of libcdio
http://www.gnu.org/software/libcdio/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: use a normal config option instead of menuconfig, update DEVELOPERS]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Romain Naour, use
QUOTATOOL_INSTALL_TARGET_OPTS to avoid installing man pages, as it
fails due to a bug in the upstream package Makefile]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My goal was to rely on upstreamed features as much as possible, which
means that some bits are only half-baked for now:
- Due to the DTS restructuring in upstream kernel, we require 4.11+. The
latest LTS or CIP kernels do not know about the -Base model.
- Linux has no generic support for SFP cages (yet). It seems that this
has hit the net-next tree in August 2017, but there's been no release
(it's probably targettting 4.14). Also, the merge only included the
required infrastructure; the mvneta driver conversion is not included.
Patches which finalize this exist in Russel King's tree and also in
random vendor trees.
- There's no access to the SPI flash in these versions of
uboot/linux/dts.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
[Arnout:
- rename to solidrun_clearfog_defconfig;
- specify kernel headers version (default is now 4.15);
- remove ext2 fs size override, the 4 extra MB are not needed;
- U-Boot needs dtc and openssl;
- add comments to defconfig;
- update .gitlab-ci.yml;
- mention in readme.txt that SFP support is missing;
- add Jan to DEVELOPERS.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- remove LIBKRB5_VERSION_MAJOR
- minor tweaks to commit title and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Synopsys DesignWare HSDK (which stands for ARC HS
Development Kit) is the latest and greatest development
platform that sports quad-core ARC HS38 in real silicon.
Most noticeable features of the board are:
* Quad-core ARC HS38 CPU running at 1GHz
* 4Gb of DDR
* Built-in Vivante GPU (well supported via open source
Etnaviv drivers)
* Built-in Wi-Fi/Bluetooth module (RedPine RS-9113)
And as usual we have:
* [micro] SD-card slot
* 2 USB 2.0 ports
* 1Gbit Ethernet port
* Built-in Digilent JTAG probe
* Serial port accessible via micro-USB port
Writing sdcard.img on SDcard creates two partitions:
* FAT32 with uImage and uboot.env
* EXT4 with root filesystem
We modify kernel config because in default hsdk kernel config
CONFIG_INITRAMFS_SOURCE parameter is set and when we build
rootfs separately (BR2_TARGET_ROOTFS_INITRAMFS is not set)
error appears. Also we set up CONFIG_ARC_UBOOT_SUPPORT which
enables usage of uboot variables in the boot process.
[Peter: Fix comments and rename defconfig to snps_archs38_hsdk_defconfig,
Add defconfig to DEVELOPERS and fixup board/synopsys entry,
Drop postimage script, rename env file in genimage.cfg and drop size
setting for rootfs partition,
Add "" for CONFIG_INITRAMFS_SOURCE in linux fragment]
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 0.28 ncmpc only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Add a hash for the license file.
Add a nmpc entry for myself in DEVELOPERS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc.
64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A
Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card
contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is
available with 1 or 2 Gig-Ethernet PHYs.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Changes v1 -> v2:
- updated kernel and u-boot source repositories to github
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the woff2 package to Builroot. This is needed by webkitgtk from
version 2.20.0 onwards. WebKitGTK+ used to bundle a copy of the library,
but it stopped doing so now that the upstream is has been making
releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the brotli package to Buildroot. This is needed by woff2, which in
turn is needed by webkitgtk from version 2.20.0 onwards. WebKitGTK+ used
to bundle a copy of the library, but it stopped doing so now that the
upstream has started making releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add docker-proxy package to Buildroot. Needed by docker-engine at
runtime, and previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The T1 QoriQ from NXP has had a few varients of RDB dev boards.
This target is against the latest D4RDB version. Any of the
other versions before D4RDB (plain RDB), may require backing off
the uboot version to SDK 1.6 and/or adjusting the kernel dtb used.
This board configuration provides an upstream kernel build which
has been verified to boot on target.
The target assumes the user still uses the NXP suggested prebuilts
in the SDK2.0 (last release for PowerPC). If a uboot rebuild is
required, the source for SDK2.0 can be found in the following repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replacing the p1010rdb, this board is based on the tower development
system still available by NXP. The board is setup to track upstream
Linux and has been bumped from 4.1 to 4.15 (compared to p1010).
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new entry for myself listing the TS-5500 board directory and
defconfig file.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python based multi-container orchestration for Docker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport of the functools module from Python 3.2.3 for use on 2.7 and PyPy.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Library to use the pseudo-tty of a docker container.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python library for the Docker Engine API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssl.match_hostname() function from Python 3.5.
This function IS available in python 2.7 since 2.7.9, but it doesn't support
matching on IP addresses which is needed for some use cases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python bindings for the docker credentials store API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Daniel's address is bouncing and my touch on fbgrab is now the most
recent one.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package to create and handle json structures in Python,
with very easy and convenient API.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I would like to help maintaining the following defconfigs:
imx23evk_defconfig
imx6-sabreauto_defconfig
imx7dpico_defconfig
mx25pdk_defconfig
mx51evk_defconfig
mx53loco_defconfig
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are spacial RF calibration utilities for TI Wilink 18xx
modules.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am leaving Xilinx so to avoid future bounces update my email address
to my personal email address.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add allwinner mali kernel driver package. Used in combination with
userspace Allwinner openGL libraries, it gives possibility to use 3D openGL
SoC acceleration.
[Peter: Rename to sunxi-mali-mainline-driver. Use revision selection from
sunxi-mali-mainline package. Depend on that package and default to
y if dependencies are met. Tweak Linux config]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Allwinner Mali openGL userspace driver r6p2.
Used combined with kernelspace Mali driver,
it gives possibility to use 3D openGL SoC acceleration.
It provides fbdev libraries and headers.
It is compatible with Linux >= 4.4 as sunxi-mali-driver-mainline.
[Peter: Move version logic to Config.in, ensure directories exists]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Free Electrons is being renamed to Bootlin. While the
@free-electrons.com e-mail addresses still work, it is not guaranteed
to be the case in the future. Hence, this patch updates the DEVELOPERS
file to use the @bootlin.com addresses for all Bootlin engineers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Perier is no longer at Free Electrons, and his e-mail address
@free-electrons.com no longer exists, especially with the rename to
Bootlin. Romain is no longer maintaining the amd-catalyst package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Flask-SQLAlchemy is a Flask microframework extension which adds support for
the SQLAlchemy SQL toolkit/ORM.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that
gives application developers the full power and flexibility of SQL.
It provides a full suite of well known enterprise-level persistence
patterns, designed for efficient and high-performing database access,
adapted into a simple and Pythonic domain language.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new package provides Cargo, the Rust official package manager.
Cargo is written in Rust and uses Cargo as its build system. It also
depends on other Rust packages.
Normally, a previously installed version of Cargo would be used to:
1. Fetch the dependencies.
2. Build the new version of Cargo, using the available Rust compiler.
But the fetching step prevents offline builds. So instead two features
of Cargo are leveraged: vendoring [1] and local registry.
First, a tarball of the build dependencies generated using `cargo
vendor` is fetched along with Cargo source code.
Then, the build process is as follows:
1. The tarball of the build dependencies is uncompressed in a local
registry.
2. A snapshot of Cargo, provided by cargo-bin, builds the final
version of Cargo.
3. A configuration file telling Cargo how to cross-compile programs for
the target is generated and installed.
Currently, only the host variant is provided.
[1] https://github.com/alexcrichton/cargo-vendor
[Peter: use src.fedoraproject.org, fix comment]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides rustc, the compiler for the Rust programming
language, built from source.
Currently, only the host variant is built.
The Rust compiler uses LLVM as its backend: a copy of LLVM source code
is provided and CMake is used to build it. It is possible to use a
pre-built external copy. When LLVM/clang will be available in Buildroot,
it would be possible to benefit from this feature and thus decrease
build time.
LLVM is configured to generate code for x86, ARM, PowerPC and MIPS
architectures.
The Rust compiler uses Cargo as its build system and is written in Rust.
Therefore this package depends on cargo-bin and rust-bin.
The internal build process is as follows:
1. stage0 compiler, provided by rust-bin, is used to build stage1
compiler.
2. stage1 compiler builds the final Rust compiler (stage2 compiler)
and the standard library for the host architecture.
3. the standard library for the target architecture is built.
The target architecture to support is given by the GNU/LLVM target
triple. Rust supports some predefined targets [1]. As the build system
expects the triple to be in the form of <arch>-unknown-<system> and
Buildroot toolchain wrapper uses <arch>-buildroot-<system>, the package
Makefile uses $(RUST_TARGET_NAME) defined in the rustc package and uses
it instead of $(GNU_TARGET_NAME).
When compiling Rust code with this compiler, the generated program only
depends on the target C library, as it is statically linked to the Rust
standard library and any other code from Rust packages (a.k.a.
"crates").
If the jemalloc package is selected, support for this memory allocator
will be enabled in the target standard library.
The menuconfig entry for rustc is also updated to expose this provider.
[1] https://forge.rust-lang.org/platform-support.html
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package fetches a binary version of Cargo, suitable to
bootstrap the host variants of the Rust compiler and Cargo, the package
manager.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides a pre-built version of rustc, the compiler for the
Rust programming language, fetched from the upstream project.
A pre-built version of the standard library for the host as well as one
for the chosen target are also fetched and installed.
Only the host variant is provided to allow the user to cross-compile
Rust programs and run them on the target.
This package could also be used to provide a bootstrap compiler when building
Rust from source. So, in order to add it as a build dependency, the compiler and
standard libraries are only installed in $(HOST_DIR) if the package is
explicitly selected.
The menuconfig entry for rustc is also updated to expose this provider.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remi is a GUI library for Python applications which transpiles an
application's interface into HTML to be rendered in a web browser.
This removes platform-specific dependencies and lets you easily
develop cross-platform applications in Python!
https://github.com/dddomodossola/remi/tree/master
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
safec fork with all C11 Annex K functions
This library implements the secure C11 Annex K functions on
top of most libc implementations, which are missing from them.
https://rurban.github.io/safeclib/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lldpad package comes with utilities to manage an LLDP interface with
support for reading and configuring TLVs. TLVs and interfaces are individual
controlled allowing flexible configuration for TX only, RX only, or TX/RX
modes per TLV.
http://open-lldp.org/
Signed-off-by: Laurent Charpentier <laurent_pubs@yahoo.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The C++ REST SDK is a Microsoft project for cloud-based client-server
communication in native code using a modern asynchronous C++ API design.
This project aims to help C++ developers connect to and interact with
services.
This package is licensed under the MIT package and depends on BOOST
and OpenSSL/LibreSSL.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FlatBuffers is an efficient cross platform serialization
library for C++, C#, C, Go, Java, JavaScript, PHP, and
Python. It was originally created at Google for game
development and other performance-critical applications.
http://google.github.io/flatbuffers/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The aoetools are programs for users of the ATA over Ethernet (AoE)
network storage protocol, a simple protocol for using storage over an
ethernet LAN.
Tested on Beaglebone Black.
Build tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- fix check-package warnings
- use SPDX license code, GPL-2.0
- use github helper
- pass TARGET_CONFIGURE_OPTS instead of just CC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Partially fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/47806089
And add myself to the list of devloppers for it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
zlib-ng, a fast Zlib replacement
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: drop host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Thomas: rename to tcf-agent, add missing dependency on BR2_USE_MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To support transparent (de)compression in iso9660, we need mkzftree,
which comes from zisofs_tools, biundled with cdrkit.
However, cdrkit is a cmake package, but zisofs_tools is an autotools
package, so we need a separate package just to get mkzftree, but it is
pretty lightweight.
We just need the host variant for now,so we just add that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add entry to DEVELOPERS file, rename to zisofs-tools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i2c-tools package has adopted the code of eeprog.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Additionally added myself to ffmpeg, rpi-firmware and rpi-userland as
changes to mpv may require updates or other changes to these packages
and vice-versa.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- propagate dependencies of selected packages in Config.in
- add missing Config.in comment about dependencies
- add missing upstream URL in Config.in
- add missing comment header in .mk file
- remove --disable-nls from configuration options, it is taken care
of by the package infrastructure
- remove --disable-dependency-tracking, it is taken care of in the
package infrastructure
- add $(TARGET_NLS_DEPENDENCIES) to <pkg>_DEPENDENCIES, since gconf
has optional NLS support
- add host-intltool to <pkg>_DEPENDENCIES, since gconf needs
intltool-update
- fix license: it's LGPL-2.0+, not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nilfs-utils provides the user-space utilities for the nilfs2
filesystem.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A json library that aims to make json feel like a first class data
type using C++11, json for modern c++ is a easy to use, flexible,
modern json library.
Design goals include:
- Intuitive syntax. In languages such as Python, JSON feels like a
first class data type. All the operator magic of modern C++ is used
to achieve the same feeling in c++.
- Trivial integration. The whole code consists of a single header file
json.hpp. That's it. No library, no subproject, no dependencies, no
complex build system. The class is written in vanilla C++11. All in
all, everything should require no adjustment of compiler flags or
project settings.
- Serious testing. The class is heavily unit-tested and covers 100% of
the code, including all exceptional behavior. Furthermore, it is
checked with Valgrind that there are no memory leaks. To maintain
high quality, the project is following the Core Infrastructure
Initiative (CII) best practices.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas:
- use "json-for-modern-cpp" everywhere as the name of the package
- add <pkg>_INSTALL_TARGET = NO since it's a header only library]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The wolfSSL embedded SSL library is a lightweight and portable
SSL/TLS library.
Tested on Beaglebone Black using a tool called testsuite that
comes with wolfssl source code inside the testsuite/ directory.
To build it, we have to pass --enable-examples in the configure,
and then manually copy the binary to the rootfs. Also, to use
this tool, you will we need to copy the certs/* directory to the
rootfs.
Build-tested with test-pkg script.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox-lib build-depends on xlib_libXext, but forgets to select it.
It also build-depends on expat without selecting it, but it does need
it.
Fix that: select xlib_libXext, remove expat.
Add myself to developpers for matchbox packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add instructions for adding a package which uses the Meson build system.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides the host variant of the Meson Build System, an
open source build system meant to be both extremely fast, and as user
friendly as possible.
More precisely, Meson creates configuration files for the Ninja build
system.
Besides building Meson, it generates a configuration file
("$(HOST_DIR)/etc/meson/cross-compilation.conf") to be used when
cross-compiling a Meson-based project.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Orangepi PC2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Zero Plus2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Prime
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Win/Win Plus
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Olimex A64-OLinuXino
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Tsvetan Usunov <usunov@olimex.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for FriendlyARM Nanopi NEO2 board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for FriendlyARM Nanopi A64
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for SoPine board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Pine64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for bananapi M64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Mario Lang <mlang@blind.guru>
[Thomas:
- wrap too long CONF_OPTS line that disables all the language
bindings
- use an intermediate BRLTTY_TEXT_TABLE variable to store the
qstripped version of BR2_PACKAGE_BRLTTY_TEXT_TABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- switch to the autotools build system, which supports static linking
properly
- add <pkg>_LICENSE_FILES
- add sha256 hash for the tarball, in addition to the md5 one
- add license file hash
- squash DEVELOPERS file addition]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested on Beaglebone Black.
Build-tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- remove file removal in install command
- use DESTDIR and prefix instead of just prefix in install command.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add MacchiatoBin board by SolidRun. This board is based on Marvell
Armada 8040 SoC. Board support package includes the following
two options: mainline and vendor BSPs.
Mainline BSP:
- Marvell ATF v1.3-armada-17.10
- mainline U-Boot v2017.11
- mainline Linux kernel v4.14.4
Marvell BSP with more hardware support enabled:
- Marvell ATF v1.3-armada-17.10
- Marvell U-Boot based on v2017.03
- Marvell Linux kernel based v4.4.52
More details about this board are available on wiki:
- http://wiki.macchiatobin.net
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: misc tweaks in readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gstreamermm provides C++ bindings for gstreamer.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mario Lang <mlang@blind.guru>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
[Thomas: invert ncurses/slang select to avoid a circular dependency,
add BR2_USE_MMU dependency inherited from slang.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Paul Cercueil's address @analog.com is bouncing, so let's use his
personal e-mail address instead for the libiio package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Marvell Armada 7k/8k SoCs support to arm-trusted-firmware package.
Marvell ATF needs two additional dependencies:
DDR training code and SCP_BL2 image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: adjust to previous ATF changes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream Commit:
2017-11-03 16:19:58 +0000
irq.h: fix compilation error due to missing bool type
The following patches were updated/removed.
- 0001-avoid-redefining-PAGE_SIZE.patch is removed, as
it has been merged upstream as of commit 4095fac8
- 0002-x86-kvm-cpu.c-don-t-include-asm-msr-index.h.patch is
removed, as it has been merged upstream as of commit
1cc05b24
- 0003-use-poll.h-instead-of-sys-poll.h.patch is removed,
as it has been merged upstream as of commit 52c22e6e
- 0004-check-for-and-use-C-library-provided-strlcpy-and-str.patch
is removed, as it has been merged upstream as of commit
8f22adc4
- 0005-Fix-call-to-connect.patch is removed, as it has been
merged upstream as of commit d77bd4f4
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some systems, including Marvell Armada 7k/8k SoCs, have a separate
System Control Processor (SCP) for power management, clocks, reset
and system control. ATF Boot Loader stage 2 (BL2) loads optional
SCP_BL2 image into a platform-specific region of secure memory.
This package adds SCP_BL2 firmware for Marvell Armada 7040 and 8040 SoCs.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas:
- Use "binaries-marvell" in the Config.in prompt and in the .mk file
header.
- Change the license information.
- Adjust license information: it is GPL-2.0 with the FreeRTOS
exception, and therefore can be redistributed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package adds Marvell Armada SoC DDR training algorithms.
This code is not built separately, it is needed as dependency
to build ATF firmware for Marvell Armada SoCs.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas:
- Remove MV_DDR_MARVELL_SRC_SYMLINK, ATF will directly pick up the
mv-ddr-marvell code from where it is.
- Use "mv-ddr-marvell" as the Config.in prompt, and in the comment
header of the .mk file.
- Add upstream URL in Config.in help text
- Adjust license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This board is quite similar to orangepi-one board. Instead of ethernet, it
has RTL8189FTV SDIO WiFi chip.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package adds the rtl8189fs WiFi driver. The driver is sourced
from jwrdegoede's and icenowy's work on GitHub:
repo: https://github.com/jwrdegoede/rtl8189ES_linux.git
branch: rtl8189fs
Driver is known to support Realtek RTL8189FTV chip.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek
RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot
and kernel. So it makes sense to create a separate entry
for this board in buildroot.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001-Makefile-remove-Werror-to-avoid-build-failures.patch is
adjusted to apply to the new version of kvm-unit-tests
- 0001-x86-hyperv_clock-be-explicit-about-mul-instruction-d.patch is
removed, as it has been merged upstream as of commit
45276b5860522921c77fb3ccc1458ff5f223c3c6.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OSTree is an upgrade system for Linux-based operating systems
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Thomas: use SPDX license code, fix license, it's GPL-2.0+ not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 940bfe2f43 with the
following changes:
- new hashes for 5.6.3 and 5.9.1 (there is no 5.9.2).
- BR2_PACKAGE_QT5BASE_LICENSE_APPROVED has been removed
- add GPL-3 to licences
- uses SPDX identifier for licences
- add missing dependencies (qt5base, qt5webkit, qt5declarative)
- removes /usr when qmake host-tools is invoked at configure
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Thomas: add entry in the DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sample quest and testing quest are not included in SOLARUS_LICENSE
since it's notinstalled by default.
Remove Werror when building with debugging symbols.
Add libpng runtime dependency since solarus games require png image
support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rygel is a home media solution (UPnP AV MediaServer) that allows you to
easily share audio, video and pictures to other devices.
Additionally, media player software may use Rygel to become a
MediaRenderer that may be controlled remotely by a UPnP or DLNA
Controller.
Rygel achieves interoperability with other devices in the market by
trying to conform to the very strict requirements of DLNA and by
converting media on-the-fly to formats that client devices can handle.
Most Rygel functionality is implemented through a plug-in mechanism.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- use SPDX license codes
- add hashes for license files
- move Config.in comment at the end of the Config.in file to not
break the indentation of the sub-options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffconfig is a simple utility for comparing two configuration files.
See usage in the script for more info.
Borrowed from the Linux kernel source code and adapted to Buildroot.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since kernel drivers for Realtek wireless chips use non-standard
interfaces, upstream hostapd does not support them. One have to apply
an external patch for hostapd to work with these chips. See:
https://github.com/pritambaral/hostapd-rtl871xdrv
A configuration option is added to enable support for Realtek chips,
and it's turned off by default.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The addition of a new defconfig in commit
459e3320dc ("configs/imx6sx-sdb: Add new
defconfig") introduced changes in the DEVELOPERS file and
.gitlab-ci.yml file that were not matching the defconfig name. This
commit fixes those issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building waylandpp for the target requires a wayland-scanner++ binary
built for the host.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: use 'depends on BR2_PACKAGE_WAYLAND' instead of a select.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Branch 1.8.x of libupnp is not compatible with branch 1.6.x so add a
dedicated package and make it depends on !BR2_PACKAGE_LIBUPNP as
suggested by Thomas Petazzoni and Arnout Vandecappelle during review
of "libupnp: add 1.8.3 version" patch.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: fix the dependencies of the Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6ulevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes since v2:
- remove newlines from Config.in
- add LICENSE hash
Changes since v1:
- reword commit to match upstream style
- fold the DEVELOPERS modifications into the same commit
- add Config selections for required python core modules
- bump version to 6.3.0
Tested in a clean chroot, events are generated for exceptions, and
reported to the server configured for the client.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6sx-sdb_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6slevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-----BEGIN PGP SIGNATURE-----
iHAEABECADAWIQSrB9gG0s50H7iG7lCwJbqLWcNjGQUCWgoOuBIcamFjbWV0QHVj
bGliYy5vcmcACgkQsCW6i1nDYxk3BACgoEfYuoacjRfkauSnpqK2hoUwJ0EAn211
meekIKU8LLE+mRzozp90x+sT
=mJ5n
-----END PGP SIGNATURE-----
Merge tag '2017.11-rc2' into next
master has gained a number of autobuilder bugfixes since rc1, so merge these
to next to also fix them there.
Make WiFi work out of the box on orange-pi-zero:
- add xr819 firmware to image
- add mdev for module autoloading
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package enables access to firmware blobs from Armbian firmware
repository: https://github.com/armbian/firmware
That repository contains multiple firmware blobs grouped by vendor.
For the sake of convenience each group can be independently selected
using Kconfig options. This commit enables the following options:
- firmware blobs for XR819 SDIO WiFi chip
- firmware blobs for AP6212 WiFi/BT combo
Armbian firmware repository does not include any specific licenses.
Most part of those firmware blobs belongs to various Android/Linux
SDK packages provided by board vendors. As a result, this package
makes use of the following conservative approach for all the
selected firmware binaries:
FIRMWARE_LICENSE = PROPRIETARY
FIRMWARE_REDISTRIBUTE = NO
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: add license hash, fix Config.in, correct license as pointed out by
Yegor]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rfkill program has been incorporated to the util-linux package.
The new implementation is based upon, and backward compatible with, the
original rfkill from Johannes Berg and Marcel Holtmann.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Open-source software for volunteer computing and grid computing.
Use the idle time on your computer to cure diseases, study global
warming, discover pulsars, and do many other types of scientific
research.
https://boinc.berkeley.edu
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Bernd:
- bumped to version 7.8.3
- removed patches which where applied upstream
- added myself to DEVELOPERS as well]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I've been using this packages to test changes in the grub package, so
I can maintain them.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for bananapi M1 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
