* Convert mpc to a proper autotargets package
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert mpfr to a proper autotargets package
* Bump to version 3.0.0-p8
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert gmp to a proper autotargets package
* Bump to version 5.0.1
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without this patch we'd need separate versioned patch directories for
target and host packages, thus having unwanted duplication.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream decided to change the file naming convention.
sqlite-amalgamation is now sqlite-autoconf
For a given version, say, 3.7.4 (W.X.Y) upstream now uses WXXYYZZ with Z
reserved for minor fix versions, all zero padded.
Thus 3.7.4 is 3070400, 3.7.4.1 would be 3070401.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
kdrive has no glx support, and mesa3d depends on libdrm which needs
largefile support (just like the modular server), so ensure mesa3d
can only be enabled in that configuration.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the gentargets conversion, the tarball is extracted directly in the
source directory, so adjust paths to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It hasn't seen any updates since it was added early 2008, upstream seems
dead and it doesn't build with modern GCC versions.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having to require svn, git or bzr unconditionally, only
require them when one package needs them to be downloaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In e6633fd2e3 I did crap, and added a
quietization inside a shell command, which was already quietized. This
was stupid, and is fixed by this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the support of custom external toolchains, we forgot to touch the
$(STAMP_DIR)/ext-toolchain-checked stamp file, which means that the
toolchain was re-checked and re-installed at everyt build.
At the same time, quietize a bit other stamp files touch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump libxml2 to version 2.7.8.
Re-enable libtool patch now that we handle libtool2 in package infra.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Bump to version 1.5
* Really configure right (or wrong depending on perspective) since we
weren't building ed for the target it was completely broken.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Patch needs a toolchain with WCHAR support
* Use real upstream gnu mirror
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert to autotargets package.
* Bump to version 7.2.446.
We fetch from svn to avoid having a ton of patch files.
This won't do us any good if we want vim 7.3 since the repository was
moved to mercurial. However 7.3 still has some cross-compile issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many small fixes, see http://www.sqlite.org/releaselog/3_7_4.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Fixed extract() to do not overwrite $GLOBALS and $this when using
EXTR_OVERWRITE.
* Fixed crash in zip extract method (possible CWE-170).
* Fixed a possible double free in imap extension.
* Fixed possible flaw in open_basedir (CVE-2010-3436).
* Fixed NULL pointer dereference in ZipArchive::getArchiveComment.
(CVE-2010-3709).
* Fixed bug #52929 (Segfault in filter_var with FILTER_VALIDATE_EMAIL
with large amount of data).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to patrick.ziegler@fh-kl.de in the mailing list for noticing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By default there is no module activated in ts.conf. According to the
ts.conf previously attached in the tslib package dir (which was never
installed) the default module of choice was the raw module.
This patch enables the raw module in the ts.conf file in the tslib
source tree, which will be installed in the target.
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Due to missing official releases, fetch directly from GitHub
repository. Many bugfixes since 1.0 and all previous patches in
Buildroot are either applied or obsoleted.
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As per the discussion at
http://lists.busybox.net/pipermail/buildroot/2010-December/040030.html,
remove the bits that forced the IPv6 configuration in the kernel
depending on the toolchain ability to support (or not) IPv6. You may
have a toolchain with IPv6 support but still don't want to have IPv6
in your kernel.
The only parameters we adjust in the kernel configuration are:
* ARM EABI, since we got a lot of bug reports regarding misconfigured
kernel compared to the ABI used by userspace applications.
* initramfs, since its contents are generated by Buildroot itself
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch imagemagick-6.6.4-add-errno-h-if-argz-h-does-not-exist.patch
was not applied anymore due to a difference in the version number, and
it didn't prevent imagemagick to be built. It was introduced several
years ago together with the ImageMagick package itself, so presumably
it is no longer needed.
The new patch allows ImageMagick to use the correct xml2-config script
to get the proper location for XML2 headers and libraries. Otherwise,
-I/usr/include/libxml2 is found in the compile flags.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2371
Bug 2371 was a Qt compilation issue when MySQL support was enabled,
because the Qt configuration tests were looking at host MySQL
libraries.
Even though I couldn't reproduce the bug with MySQL libraries
installed on my host, there was clearly a problem since
-I/usr/include/mysql and -L/usr/lib/mysql were part of the compilation
flags when building those tests.
This was caused by the fact that /usr/bin/mysql_config was used
instead of $(STAGING_DIR)/usr/bin/mysql_config. We fix this by passing
the path to the correct mysql_config script using the -mysql_config Qt
./configure argument. Since this mysql_config script returns the
correct flags for libraries and headers path, the hardcoded -I and -L
flag in qt.mk are no longer needed.
With this in place, Qt is no longer compiled with -I/usr/include/mysql
and -L/usr/lib/mysql, which presumably should fix the problem reported
in bug 2371.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
MySQL 5.1.47 is affected by a bug in one test called the "ABI check",
which does not work with recent gcc versions. This bug is referenced
as http://bugs.mysql.com/bug.php?id=52514 in MySQL bug tracker.
Since it has been fixed in newer versions of MySQL, we simply bump the
version to the latest available in the 5.1.x series.
The patches have not changed, they have only been refreshed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2965
For some odd reason, xkeyboard-config < 1.8 was creating a symbolic
link from /usr/share/X11/xkb/xkbcomp to the xkbcomp binary. But in
cross-compilation mode, this is absurd as the xkbcomp binary to which
the link is pointing is the one in $(HOST_DIR).
This symbolic link thing has been removed completely starting from
xkeyboard-config 1.9. See
http://cgit.freedesktop.org/xkeyboard-config/commit/?id=f413dff57e77e7b01461508f74b4e92d1dc8defd.
Therefore, we simply bump xkeyboard-config to the latest available
version, 2.0.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on IRC, this only needs to be disabled for very specific
configurations, and it can nowadays be done with a custom busybox
.config (CONFIG_INSTALL_APPLET_DONT), so get rid of the option.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Explicitly explain what the (default) install target does, so people who
don't know busybox details understands what the option does.
Notice: Busybox can be configured to create hard links or shell wrappers
instead, but by default symlinks are used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
