The AXS10x Platform consists of a DesignWare AXC001 CPU
Card (with ARC 770D core) in case of AXS101 or AXC003 CPU Card
(typically with ARC HS38 core) in case of AXS103 mounted on an
ARC Software Development Platform Mainboard with DesignWare peripherals:
* SD/MMC contoller
* Gigabit network contoller
* Serial ports (8250-compatible)
* USB 2.0
* SPI
* I2C
It also houses HDMI output for external monitor connection.
For stand-alone usage of the board (with only keyboard, mouse and montor
attached) kernel console and getty made available on tty0 as well as on
serial port (ttyS3).
Note there're 2 prerequisites:
[1] u-boot: 2015.07 - fix creation of .config
http://patchwork.ozlabs.org/patch/502558/
[2] binutils: fix buildng of Linux kernel for ARCv2 ISA
http://patchwork.ozlabs.org/patch/503550/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot v2015.07 is required for successful out-of-the-box
build for common Xilinx Zynq boards (including Zedboard).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a Xilinx Zynq (xc7z045) development board, based on Xilinx Zynq
(xc7z045).
This support is based on Avnet Zedboard defconfig/readme.
[Thomas:
- minor fixes in the readme.txt
- rename defconfig from zc706_defconfig to xilinx_zc706_defconfig.]
Signed-off-by: Jordi Montagne <jordi.montagne66@gmail.com>
Tested-by: Jean Burgat <jeanburgat33@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes the U-Boot's default environment to
boot Zedboard out-of-the-box from SD card.
The sdboot procedure tries to load a file system.bit into
the Zynq's PL (only if it exists). It is also possible to
alter the booting by an uEnv.txt file located on your SD card.
The uEnv.txt is a plain text file with <key>=<value> pairs
one per line.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot v2015.07 builds working SPL without a manual
intervention. The BOOT.BIN is generated from the standard
SPL so no BR2_TARGET_UBOOT_SPL_NAME redefinition is needed.
The SPL requires the u-boot-dtb.img file to boot properly.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a genimage config file and a post-image script for the
Wandboard, to generate a medium image "sdcard.img", ready to be booted.
The image contains the layout explained in the board readme.txt file:
U-Boot, its environment, and an Ext2 rootfs partition.
The defconfig has been slightly changed to enable this feature. Also
lighten the readme file since the config file is documented and simpler.
Tested on a Wandboard Solo.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: change the name of the tmp dir, and remove it before using
it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is largely the same as altera_sockit_defconfig.
It uses a fresher Linux and u-boot than SocKit. It also speeds the
serial port up to 115200.
The post-image script is generalized by adding
BR2_ROOTFS_POST_SCRIPT_ARGS and moving it up the altera directory.
Similarly, the readme is moved up and made more generic.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those scripts are executed by u-boot in order to detect the hardware
configuration (board, displays etc...), configure the bootargs and
device tree accordingly or update the bootloader located in NOR flash.
This update is necessary due to the kernel bump to version 3.10.53.
The rework consists of replacing the binaries by their text file
equivalent and generate the binaries from the post-build.sh script.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also update the dtb files to be generated.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a set of patch to add support for warpboard
(Freescale board based on imx6sl)
The patch contains :
- defconfig for warpboard
- linux patches from Fabio Estevam to fix device tree due to last change on
warpboard schematics (rev 1.12) and to fix kernel imx_v6_v7 defconfig which
use incorrect hci protocol
- specific firmware file for warpboard bluetooth
nvram : brcmfmac4330-sdio.txt
Origin of nvram config file for wifi :
https://github.com/Freescale/meta-fsl-arm-extra
[Thomas: misc rewording/improvements in the README file.]
Signed-off-by: Arthur LAMBERT <arthur@dreem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a defconfig for the Olimex A20-OLinuXino-Micro board, reusing most
of the A20-OLinuXino-Lime files.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The files in board/olimex/a20_olinuxino_lime/ work with minimal or no
modifications for the Olimex A20-OLinuXino-Micro board, whose support is
going to be added in a later commit.
Rename the directory to clarify it's not restricted to the Lime anymore.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency, rename atmel_xplained_defconfig to
atmel_sama5d3_xplained_mmc_defconfig as this configuration supports
booting the sama5d3 Xplained with an MMC card (as opposed to the NAND
flash).
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This supports:
- sama5d31ek
- sama5d33ek
- sama5d34ek
- sama5d35ek
- sama5d36ek
with or without the PDA4 or PDA7 screens.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use kernel (3.18) and u-boot (2015.01) from Atmel's repositories.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we no longer have a non-DT defconfig, and we no longer want to
advertise such a possibility (non-DT is being phased out), just rename
the DT-enabled defconfig file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The RPi is slowly but surely dropping support for booting without a DTB,
so just ditch our old defconfig now that we have up-to-date DT-enabled
defconfigs for all RPi models (save for the compute module).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version (4.0.y); build an in-tree DTB.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version; build an in-tree DTB; use
a in-tree defconfig; enable C++ (to match what we have in the non-DT
variant); do not install DTB overlays (this minimalist config does not
make use of them).
Generate the DTBs for both the "original" variant (A and B) and the
"Plus" variant (A+ and B+).
Drop our custom linux defconfig file now we use an in-tree one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 3.4.x vendor specific kernel, which allows to use
the Mali 3D acceleration for OpenGL support.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 4.x mainline kernel.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update most of the configs to the latest kernel version (4.1) except for
arm-nuri which is stuck.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#8186
Mkfs.jffs2 accepts a --pagesize parameter, which allows specifying the size
of the virtual memory page size of the target machine, where the image will
be used. (This is the value of the PAGE_SIZE macro in Linux.) In most cases
the parameter doesn't need to be set as the default value of 4 kB is usually
correct.
The parameter was used incorrectly in Buildroot -- it was set to the page
size of flash memory chip -- this commit fixes this problem. Now the
--pagesize parameter is not used at all (unless the user explicitly chooses
to use a custom value during configuration). All existing defconfigs were
corrected to match the new configuration variable names.
[Peter: reword, add Config.in.legacy handling]
Signed-off-by: Michał Leśniewski <mlesniew@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The VIA VAB-820 board (and the AMOS-820 system built around it) is
based on Freescale i.MX6 for embedded and industrial computing.
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.
So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.
Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.
Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(ARM and SH4 uClibc toolchain builds)
- Update kernel
- Add u-boot configuration
- 6q_bootscript.txt is no more needed by new version of u-boot
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
[build test only]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This brings the raspberrypi_dt_defconfig up to the same kernel used by
the raspberrypi2_defconfig. Also changed the git URL to use HTTP for
consistency.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This changes the kernel used on the Raspberry Pi 2 from the 3.19 branch
back to the 3.18 branch. This provides a couple of advantages:
1. mmc0 works again. Floris Bos found out that this was due to using
the precompiled DTB files from rpi-firmware. These DTBs were built
using 3.18.
2. The rpi-3.18.y branch is not regularly rebased like rpi-3.19.y
according to popcornmix. See
https://github.com/raspberrypi/linux/issues/915.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain IPv6 option from the only config that's got
it since it's now a non-option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use BR2_TARGET_UBOOT_PATCH now that BR2_TARGET_UBOOT_PATCH_DIR is
deprecated.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Use a custom kernel config to avoid the caveat of a huge debug-enabled
one.
And also reduce defconfig options to avoid bloat.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch kernel config to ext4, simplify to reduce bloat.
Adjust invocation to keep the framebuffer window for graphics testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch to DTB (mandatory).
And adjust invocation to use dtb and add a little more RAM for testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Remove redudant/pointless kernel options to reduce bloat.
Switch from smc9111 to rtl8139 for networking because of issues.
Enable evdev support for better x11 testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It looks like version 23c76b7 of Raspberry kernel does not exist
anymore:
$ git clone https://github.com/raspberrypi/linux.git
[...]
$ cd linux
$ git co 23c76b7f608e51258c6fca02aebeb5d588583149
fatal: reference is not a tree: 23c76b7f608e51258c6fca02aebeb5d588583149
Replace it by latest version of 3.19 branch.
[Thomas: tweak commit log.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS became ineffective in commit a5ce7590c4
(package/rpi-firmware: bump version), and was removed in commit 4e92ffdc47
(rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS).
Remove it from the Pi configs.
Also, remove the now obsolete comment in these config files.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a manually specified custom version 3.19.2 of the linux kernel
for i.MX28, but linux-headers defaults to a 2.6.x family.
Select custom headers family 3.19.x explicitely, to repair
linux-headers "build".
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX28 Evaluation Kit (or EVK) is Freescale's evaluation board based on the
i.MX287 Applications Processor.
This defconfig is based on mainline u-boot and Linux kernel.
Also, we add an SD card creation script and documentation, shamelessly based on
the ones for i.MX5/6 by Luca Ceresoli.
[Arnout: fixate U-Boot and kernel (headers) versions]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SABRE Board for Automotive Infotainment (SABRE Auto, a.k.a. SABRE-AI) is
Freescale's evaluation board based on the i.MX 6 ARM Cortex-A9 applications
processor.
Those defconfigs are an adaptation of freescale_imx6{q,dl}sabresd_defconfig for
SABRE Auto, and are thus based on Freescale "official" git repo on
git.freescale.com and SW release 3.10.17_1.0.0_ga.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rename imx6sabresd board folder to imx6sabre, to prepare for Sabre Auto
addition. Update doc, link and defconfigs accordingly.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Eric Bénard <eric@eukrea.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain non-largefile support option since it's
being removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX31 Product Development Kit (or PDK) is Freescale development board
based on the i.MX31 application processor.
This defconfig is based on mainline kernel v3.15.10, and is aimed at a PDK in
"3 stack" configuration, with CPU engine board, personality board and debug
board.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a small development board, based on Freescale IMX6 Solo SoC
(single core ARM Cortex-A9). The board has excellent support in mainline
U-Boot and Linux.
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update configuration to use the 3.18.8 kernel and update U-Boot to
2015.01. With the switch to 2015.01. use the U-Boot SPL image for the
first stage bootloader instead of the at91bootstrap. The U-Boot SPL
requires that the U-Boot image format be u-boot.img in order to load
from the SD card.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for BR2_KERNEL_HEADERS_3_17 deprecation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's not required, the toolchain options should handle that.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qemu_arm_vexpress_defconfig is broken for 3.19 so keep it with 3.18.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lock to 3.18 headers; add comment about installing DTBs;
bump kernel sha1.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lock to 3.19 kernel headers; and comment about installing DTBs; bump
kernel sha1.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: James Hebden <james@hebden.net.au>
[yann.morin.1998@free.fr: fix commit log; further bump]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Guillermo A. Amaral" <g@maral.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sha1 used for the DT enabled kernel is no longer available
(presumably, the rpi-3.18.y branch was rebased recently.) This updates
it to the lastest sha1 in the rpi-3.18.y branch.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added defconfig for UDOO Quad board. Used official (manufacturer) kernel 3.0.35.
Kernel is patched in order to use gcc version 4.8 and above, according to
mailing list at
https://lists.yoctoproject.org/pipermail/meta-freescale/2013-July/003531.html
Bootloader is also downloaded from official (manufacturer) repository.
Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
[ThomasDS: use explicit commits instead of 'master'; clarify source for
kernel and u-boot as 'manufacturer']
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(compile-tested only)
[Thomas P: remove glibc, C++ and mdev selection, added some comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
i.MX6 SoloLite SoC has a different external memory base address
than the other i.MX6 family SoCs:
- 0x80000000 for i.MX6 SoloLite (see i.MX6 SoloLite Reference Manual [1])
- 0x10000000 for the others (see i.MX6Quad/Dual Reference Manual [2])
[1] http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6SLRM.pdf?fasp=1
Table 2-1 System Memory Map, MMDC - DDR Controller
[2] http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf?fasp=1
Table 2-1 System Memory Map, MMDC - DDR Controller
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.
We have to use a 3.18-based kernel for that, but there are a few
limitations:
- we can not use the minimalist RPi defconfig bundled with the kernel,
namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;
- most importantly, the rpi-3.18.y branch is constantly rebased, so
there is no guarantee that the sha1 I use today will still be usable
in the long term. Using the name of hte branch is not better either.
So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Used to test the new default binutils 2.24 (all passed).
Also update the virtex readme since the dtb is in output/images as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
