configs: add a DT-enabled Raspberry Pi defconfig
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.
We have to use a 3.18-based kernel for that, but there are a few
limitations:
- we can not use the minimalist RPi defconfig bundled with the kernel,
namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;
- most importantly, the rpi-3.18.y branch is constantly rebased, so
there is no guarantee that the sha1 I use today will still be usable
in the long term. Using the name of hte branch is not better either.
So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is contained in:
Yann E. MORIN
Thomas Petazzoni
parent
bc13478bd2
commit
23da43ae12
204
board/raspberrypi/linux-3.18-rpi-dt.defconfig
Normal file
204
board/raspberrypi/linux-3.18-rpi-dt.defconfig
Normal file
@ -0,0 +1,204 @@
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_KERNEL_XZ=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_IKCONFIG=m
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=21
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_IPC_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_NET_NS is not set
|
||||
CONFIG_RELAY=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_JUMP_LABEL=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_BCM2708=y
|
||||
CONFIG_BCM2708_DT=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_KSM=y
|
||||
CONFIG_UACCESS_WITH_MEMCPY=y
|
||||
# CONFIG_ATAGS is not set
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_STAT=m
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=m
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
|
||||
CONFIG_VFP=y
|
||||
CONFIG_BINFMT_MISC=m
|
||||
# CONFIG_SUSPEND is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_PACKET_DIAG=m
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_UNIX_DIAG=m
|
||||
CONFIG_INET=y
|
||||
CONFIG_SYN_COOKIES=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
CONFIG_INET_DIAG=m
|
||||
CONFIG_INET_UDP_DIAG=m
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_NETLINK_DIAG=y
|
||||
CONFIG_BPF_JIT=y
|
||||
# CONFIG_WIRELESS is not set
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_FIRMWARE_IN_KERNEL is not set
|
||||
CONFIG_CONNECTOR=y
|
||||
CONFIG_BLK_DEV_LOOP=m
|
||||
CONFIG_BLK_DEV_RAM=m
|
||||
CONFIG_SCSI=m
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=m
|
||||
# CONFIG_ETHERNET is not set
|
||||
CONFIG_USB_USBNET=m
|
||||
# CONFIG_USB_NET_AX8817X is not set
|
||||
# CONFIG_USB_NET_AX88179_178A is not set
|
||||
# CONFIG_USB_NET_CDCETHER is not set
|
||||
# CONFIG_USB_NET_CDC_NCM is not set
|
||||
CONFIG_USB_NET_SMSC95XX=m
|
||||
# CONFIG_USB_NET_NET1080 is not set
|
||||
# CONFIG_USB_NET_CDC_SUBSET is not set
|
||||
# CONFIG_USB_NET_ZAURUS is not set
|
||||
# CONFIG_WLAN is not set
|
||||
CONFIG_INPUT_SPARSEKMAP=m
|
||||
CONFIG_INPUT_EVDEV=m
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_HW_RANDOM_BCM2708=m
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
CONFIG_I2C_BCM2835=m
|
||||
CONFIG_I2C_BCM2708=m
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BCM2835=m
|
||||
CONFIG_SPI_BCM2708=m
|
||||
CONFIG_SPI_BITBANG=m
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_BCM2835=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_SOFT_WATCHDOG=m
|
||||
CONFIG_BCM2708_WDT=m
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=m
|
||||
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
|
||||
CONFIG_FB=y
|
||||
CONFIG_FIRMWARE_EDID=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_BCM2708=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_SOUND=m
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_SEQUENCER=m
|
||||
CONFIG_SND_SEQ_DUMMY=m
|
||||
CONFIG_SND_MIXER_OSS=m
|
||||
CONFIG_SND_PCM_OSS=m
|
||||
CONFIG_SND_SEQUENCER_OSS=y
|
||||
CONFIG_SND_HRTIMER=m
|
||||
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||
CONFIG_SND_DUMMY=m
|
||||
CONFIG_SND_BCM2835=m
|
||||
# CONFIG_SND_SPI is not set
|
||||
CONFIG_SND_USB_AUDIO=m
|
||||
CONFIG_HIDRAW=y
|
||||
CONFIG_UHID=y
|
||||
CONFIG_HID_PID=y
|
||||
CONFIG_USB_HIDDEV=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_DYNAMIC_MINORS=y
|
||||
CONFIG_USB_DWCOTG=y
|
||||
CONFIG_USB_STORAGE=m
|
||||
CONFIG_USB_STORAGE_REALTEK=m
|
||||
CONFIG_USB_STORAGE_DATAFAB=m
|
||||
CONFIG_USB_STORAGE_FREECOM=m
|
||||
CONFIG_USB_STORAGE_ISD200=m
|
||||
CONFIG_USB_STORAGE_USBAT=m
|
||||
CONFIG_USB_STORAGE_SDDR09=m
|
||||
CONFIG_USB_STORAGE_SDDR55=m
|
||||
CONFIG_USB_STORAGE_JUMPSHOT=m
|
||||
CONFIG_USB_STORAGE_ALAUDA=m
|
||||
CONFIG_USB_STORAGE_ONETOUCH=m
|
||||
CONFIG_USB_STORAGE_KARMA=m
|
||||
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
|
||||
CONFIG_USB_STORAGE_ENE_UB6250=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_BCM2835=y
|
||||
CONFIG_MMC_BCM2835_DMA=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=m
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=m
|
||||
CONFIG_LEDS_TRIGGER_ONESHOT=m
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
|
||||
CONFIG_LEDS_TRIGGER_CPU=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=m
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
|
||||
CONFIG_LEDS_TRIGGER_TRANSIENT=m
|
||||
CONFIG_LEDS_TRIGGER_CAMERA=m
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_EXT2_FS=m
|
||||
CONFIG_EXT3_FS=m
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=850
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_CONFIGFS_FS=m
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
# CONFIG_NETWORK_FILESYSTEMS is not set
|
||||
CONFIG_NLS_DEFAULT="utf8"
|
||||
CONFIG_NLS_CODEPAGE_437=m
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_1=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_UTF8=m
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_STRIP_ASM_SYMS=y
|
||||
CONFIG_PANIC_ON_OOPS=y
|
||||
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
|
||||
CONFIG_STRICT_DEVMEM=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_CRYPTO_MANAGER=m
|
||||
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
|
||||
CONFIG_CRYPTO_NULL=m
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
12
configs/raspberrypi_dt_defconfig
Normal file
12
configs/raspberrypi_dt_defconfig
Normal file
@ -0,0 +1,12 @@
|
||||
BR2_arm=y
|
||||
BR2_arm1176jzf_s=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/raspberrypi/linux.git"
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b9c9f8fc69aaba236169798c18dc1590fccf7acd"
|
||||
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/raspberrypi/linux-3.18-rpi-dt.defconfig"
|
||||
BR2_LINUX_KERNEL_ZIMAGE=y
|
||||
BR2_PACKAGE_RPI_FIRMWARE=y
|
||||
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS=y
|
||||
Loading…
Reference in New Issue
Block a user