Needed for wayland support in mesa3d-demos.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use $(VULKAN_HEADERS_VERSION) for VULKAN_TOOLS_VERSION as the vulkan packages
need to all be the same version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use $(VULKAN_HEADERS_VERSION) for VULKAN_LOADER_VERSION as the vulkan packages
need to all be the same version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Load sample script support/testing/tests/package/sample_nu.nu onto the
target and verify proper execution by nushell
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Nushell is a shell - written in Rust - that makes use of the nushell
language to interact with the operating system
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM62 board by introducing the
am62x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM62
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM64 board by introducing the
ti_am64x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM64
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the image generator that builds the initial boot binary,
tiboot3.bin, for the R5 core on TI's K3 family of devices.
This requires the R5 SPL output from the ti-k3-r5-loader package as
well as some boot firmware from ti-k3-boot-firmware.
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enclosure LED Utilities
ledmon and ledctl are userspace tools designed to control storage
enclosure LEDs. The user must have root privileges to use these tools.
These tools use the SGPIO and SES-2 protocols to monitor and control LEDs.
They been verified to work with Intel(R) storage controllers (i.e. the
Intel(R) AHCI controller) and have not been tested with storage controllers of
other vendors (especially SAS/SCSI controllers).
For backplane enclosures attached to ISCI controllers, support is limited to
Intel(R) Intelligent Backplanes.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This runtime test was suggested in discussion [1]. It should detect
potential runtime failures such as the one fixed in commit eb74998125
"package/nftables: fix the build of the pyhon bindings".
We need a special kernel, because not all nftables-related options are
enabled in the pre-built one.
[1] https://lists.buildroot.org/pipermail/buildroot/2023-August/672864.html
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit
b86adfb89a ("configs/roc_rk3399_pc: new
defconfig") introduced a new defconfig with the relevant entries in
the DEVELOPERS file, but one of these entries points to a non-existing
directory. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Firewalld provides a dynamically managed firewall with
support for network or firewall zones to define the trust level of network
connections or interfaces.
Items of note:
- Setting PYTHON="/usr/bin/env python$(PYTHON3_VERSION_MAJOR)" prevents
Firewalld from setting the shebang in the installed python files to the
full path to the python interpreter used when building.
- The bundled provided SYSV init file has several bashisms and requires
/etc/init.d/functions which buildroot doesn't provide. So instead, a more
simple init.d file is provided in the package directory, which does not
require bash.
- Firewalld >= 1.0.0 requires a linux kernel version of 5.3 or later.
Because Buildroot does not have a mechanism to detect what version a user
is compiling if the kernel is external, there is no way to prevent a user
with an external kernel older than 5.3 to select this package.
- To run, Firewalld requires enabling almost every single nftables option in
the kernel menuconfig. Indeed for a regular user, this task is quite a
time-consuming operation, and missing even one required nftables option
results in firewalld failing to start.
Through a mix of trial and error and talking to the upstream developers,
the package selects the minimum amount of kernel options required for
runtime. Understandably the list is daunting. However, these options
have passed run-time tests with kernel 5.3 (the minimum kernel version
required) and kernel 6.2.10 (the latest kernel version as of this commit
log.)
As such, it is safe to say these options will work for anybody wanting to
use firewalld with a supported kernel version of 5.3 or higher.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Thomas:
- select python3 instead of depending on it
- fixup Config.in comment
- rely on NLS support by autotools-package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a followup of the discussion at:
https://lists.buildroot.org/pipermail/buildroot/2023-July/671639.html
It provides an example of a runtime tests using standard Linux graphic
components (Kernel, DRM, Mesa3D, weston).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- use an overlay rather than create config file at runtime
- sleep in python not in target
- increase delay to capture DRI CRCs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add useful tool for bridging RAUC with the Hawkbit API.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for mpv since version 0.35.0:
3d459832a8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: improved thanks to feedback from a similar patch submitted by
Bernd Kuhls.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer versions of Google's Material Design icon package are structured
differently, making a version bump no so trivial. While work can be done
to support this, considering this package is using v2.2.3 and the most
recent version is v4.0, it is most likely that this package is not being
used. Environments which desire Material icons/fonts/etc. will most
likely achieve better results be managing their own custom package to
have an explicit selection/filter of design styles (e.g. standard,
Android, etc.), variants (basic, outlined, rounds, etc.), display
resolutions and scale selection desired.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot icicle kit configuration uses the Hart Software
Service's (HSS) payload generator tool. This tool creates a formatted
payload image for the HSS zero-stage bootloader on PolarFire SoC,
given a configuration file and a set of ELF binaries. The
configuration file is used to map the ELF binaries or binary blobs to
the individual application harts (U54s). Add the HSS payload generator
as a host package to support this.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libsoup3 has a new API [1], packages using libsoup may not compile
with libsoup3 or may crash at runtime in unexpected ways, so we add a
new package. It can be installed side by site with libsoup, without
any conflict.
[1] https://libsoup.org/libsoup-3.0/ch02.html
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mhz is a tool to mathematically calculate the real running CPU frequency
and as such has proved as invaluable tool for developing CPUFreq and
similar features in the kernel.
Its source finally got a license recently so it can be packaged.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds esp-hosted package that allows to build the Linux
Kernel Driver for Espressif Esp32-* SoCs, that once programmed with
the corresponding firmware behave like a normal Wi-Fi module. Both
SDIO and SPI busses are supported and selectable.
Cc: Jesse Taube <jesse.taube@benettiengineering.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provides the `swaybg` utility, which is commonly used with `sway` to
manage background images/color configuration for the compositor.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add swugenerator as host utility to generate images for swupdate with
all the possible options available like encryption, passkey etc.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-libconf is a pure-Python reader/writer for configuration files in
libconfig format, which is often used in C/C++ projects.
https://github.com/ChrisAichinger/python-libconf
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library provides an API suitable for the decode of
ARM(r) CoreSight(tm) trace streams.
OpenCSD is for example an optional dependency in the Linux
"perf" tool, starting from kernel version 5.1.
https://github.com/Linaro/OpenCSD
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A pure python library for creating multi-track MIDI files.
https://github.com/MarkCWirt/MIDIUtil
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Optional dependency of the upcoming libheif package.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Conmon is an OCI container runtime monitor.
https://github.com/containers/conmon
Dependency of podman.
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a package for the Rockchip ATF binary blobs. These
binaries are needed to build U-Boot for some Rockchip SoCs (e.g.,
RK3588).
As there as so many binary blobs, for each suported SoCs, it is not
practical to introduce a choice, so one must manually define which
blobs (for bl31, tpl and optee) to use from the repository, that
match their actual board.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- simplify copying blobs
- slightly tweak help texts
- add hash for license file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Go 1.20 requires a minimum version of go 1.17.13 to bootstrap.
https://go.dev/doc/go1.20#bootstrap
As Go 1.4 was the previous version that could be compiled with C, there is now
no way to bootstrap go with a C compiler, unless we use a two-stage bootstrap:
- build host-go-bootstrap-1.4-20170531
- build host-go-bootstrap-1.19.10 with host-go-bootstrap-1.4-20170531
- build host-go-1.20 with host-go-bootstrap-1.19.9
This is implemented in this commit first, before upgrading host-go to 1.20.
Note: the .patch files from package/go version 1.19.x are not necessary for
package/go-bootstrap-stage2 and have not been included there.
Previous discussion of possible alternatives:
https://lore.kernel.org/all/CA+h8R2rtcynkCBsz=_9yANOEguyPCOcQDj8_ns+cv8RS8+8t9A@mail.gmail.com/https://lore.kernel.org/all/20220525234312.643dfc03@windsurf/T/
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move libclc to a new llvm-project subfolder
and specify site for the project. Since the version of libclc is more
recent than the version specified in LLVM_PROJECT_VERSION, don't change
it for now until a later update.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move clang to a new llvm-project subfolder
and specify site and version for the project.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move lld to a new llvm-project subfolder
and specify site and version for the project.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make updating easier, move llvm into the llvm-project folder
and use the defined information.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make updating easier in the future, group all llvm projects in
one subfolder and define some variables for all of them.
Introduce LLVM_PROJECT_VERSION_MAJOR to be used by the clang package
in a followup change.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build is broken:
"It seems that you are using `distutils.command.build` to add
new subcommands. Using `distutils` directly is considered deprecated,
please use `setuptools.command.build`.
By 2023-Dec-13, you need to update your project and remove deprecated
calls or your builds will no longer be supported."
The last commit for this package occured on May, 30th, 2016.
The last issue was opened Jan, 31st, 2017 and was unanswered.
Fixes:
http://autobuild.buildroot.net/results/b57/b571d7838950e0b5ca67106cbcd9ba61b4f04a48/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Redis client written in C++
This is a C++ client library for Redis. It's based on hiredis, and is
compatible with C++ 17, C++ 14, and C++ 11.
https://github.com/sewenew/redis-plus-plus
Signed-off-by: Prabhu Sannachi <prabhu.sannachi@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package adds the rtl88822cs WiFi driver.
repo: https://github.com/jethome-ru/rtl88x2cs.git
branch: tune_for_jethub
Driver is known to support Realtek RTL8822CS SDIO WiFi/BT chip.
Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a helper class providing a template for testing data
compressor and decompressor programs such as gzip, bzip2, xz...
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removal requested via email:
could you somehow please remove me as maintainer from this package.
I am since many years not using builtroot anymore and have no longer
systems with which I could do patch requests.
I am going into retirement.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Needed for upcoming Kodi version 21.0-Omega.
Depends on the previous patch to fix build error on Coldfire.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove packages which are no longer runtime-tested here.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added in 2015 to be used by Kodi ADSP addons these efforts have stopped:
https://forum.kodi.tv/showthread.php?tid=252871&pid=3053658#pid3053658
so this package is no longer needed.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
E-mails are bouncing:
<jose.pekkarinen@unikie.com>: host ASPMX.L.GOOGLE.com[74.125.133.26] said:
550-5.1.1 The email account that you tried to reach does not exist. Please
try 550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Board support package includes the following components:
- mainline Linux kernel 5.15.108
- mainline U-Boot 2023.04
- default packages from buildroot
Note: There is a problem in u-boot display management. It should display
the ST microelectronics logo but "noise" is displayed (like when running
the command dd if=/dev/urandom of=/dev/fb0 in Linux). I also tried to
change version (even the first version in which this feature was
introduced), but without success. Despite this I decided not to disable
the video management configuration to remind us that it needs to be
fixed :).
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Link: https://www.st.com/en/evaluation-tools/32f769idiscovery.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
