Commit Graph

551 Commits

Author SHA1 Message Date
Gustavo Zacarias
41fb9f23fa configs/qemu: bump to latest version
Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.7     2.6.0           YES     OK (3)
arm_versatile           4.7     2.5.0           YES     OK
arm_vexpress            4.7     2.5.0           YES     OK
m68k_mcf5208            4.7     2.5.0           YES     OK
m68k_q800               4.7     q800-v2.4.0     NO (2)  OK
microblazebe            4.7     2.5.0           YES     OK
microblazeel            4.7     2.5.0           YES     OK
mips32r2el_malta        4.7     2.5.0           YES     OK
mips32r2_malta          4.7     2.5.0           YES     OK
mips32r6el_malta        4.7     2.6.0           YES     OK (3)
mips32r6_malta          4.7     2.6.0           YES     OK (3)
mips64el_malta          4.7     2.5.0           YES     OK
mips64_malta            4.7     2.5.0           YES     OK
mips64r6el_malta        4.7     2.6.0           YES     OK (3)
mips64r6_malta          4.7     2.6.0           YES     OK (3)
ppc_g3beige             4.7     2.5.0           YES     OK
ppc_mpc8544ds           4.7     2.5.0           YES     OK
ppc_virtex_ml507        4.7     2.5.0           NO      OK
ppc64_pseries           4.7     2.5.0           YES     OK
sh4                     4.7     2.5.0           YES     OK
sh4eb                   4.7     2.5.0           NO (1)  OK
sparc_ss10              4.7     2.5.0           YES     OK
sparc64_sun4u           4.7     2.5.0           YES     OK
sparc_sun4u             4.7     2.5.0           YES     OK
x86                     4.7     2.5.0           YES     OK
x86_64                  4.7     2.5.0           YES     OK
xtensa_lx60             4.7     2.6.0           YES     OK
xtensa_lx60_nommu       4.7     2.6.0           YES     OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-27 21:41:55 +02:00
Fabio Estevam
5232c34306 configs: warpboard: Move to kernel version 4.4.15
Currently warpboard uses a 4.0.5 kernel version from github.

Move to version 4.4.15, which is a long term supported kernel version.

With 4.4.15 we no longer need the extra two kernel patches as they have
already been upstreamed.

Use a linux fragment file, so that wireless can be functional by default.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-27 15:03:00 +02:00
Fabio Estevam
4dccfcbdd2 configs/warpboard: Generate an sdcard image
Generate an sdcard.img image to make it easier the deployment of a
Buildroot image.

[Peter: drop unneeded exit statement in post-image script]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-27 15:02:36 +02:00
Fabio Estevam
b9cece6994 configs: Add new configuration for i.MX6UL Pico board
Add support for Technexion's i.MX6UL Pico board running U-boot 2016.07
and kernel 4.7.

For information about this board, please visit:
http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-25 22:20:28 +02:00
Waldemar Brodkorb
9068fe0dea board: add blackfin gdb simulator support
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-24 22:51:42 +02:00
Thomas Petazzoni
4846700a1b board/avnet: swap ramdisk and DT load addresses in U-Boot environment
As reported in bug #9091, the U-Boot environment we provide for the
Microzed and Zedboard platforms loads the ramdisk at 0x2000000 and the
DT at 0x3000000. This means that a large enough ramdisk overwrites the
DT. It makes more sense to load the DT at 0x2000000 and the ramdisk at
0x3000000.

Reported-by:  Michael Monaghan <michaellmonaghan@gmail.com>
Tested-by: Michael Monaghan <michaellmonaghan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-24 22:44:07 +02:00
Oleksandr G Zhadan
54c8189105 configs: add Arcturus uCP1020 BSP support
The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
System on Modules product featuring a Freescale P1020 CPU,
optionally populated with 1 or 2 Gig-Ethernet PHYs,
DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.

Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-24 15:38:57 +02:00
Dagg Stompler
c7e14ecaa5 configs/odroidc2: update boot.ini
- fix disablehpd bug (thanks to Thomas for spotting it.)
- change default HDMI mode to 1080p60hz.
- add support for HDMI HotPlug Detection control.
- add support for mason timer.
- add support for headless boot

Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-24 15:37:26 +02:00
Patrick Keroulas
1cda15f494 configs: add defconfig for TS-4800
The TS-4800 is supported by mainline Linux as of 4.5 and by U-boot
as of v2016-07.

The package requires the custom ts4800-mbrboot routine.

A post-image script is provided to generate an image that can be
directly written to an SD card.

More details on the board here:
  http://wiki.embeddedarm.com/wiki/TS-4800

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-20 13:45:09 +02:00
Fabio Estevam
3536225c8e configs: mx53loco: Bump U-Boot version to 2016.07
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-12 23:48:32 +02:00
Fabio Estevam
f07ff70cdb configs: mx51evk: Bump U-Boot version to 2016.07
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-12 23:48:15 +02:00
Ezequiel Garcia
36e83efc66 minnowboard-max: Start X on boot and run a few demos
Now that we've merged nodm, the autologin display manager, we can
get rid of xinit, and startx hack and use nodm to start X on boot.
While here, let's start xterm and glmark2, just as demos.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-04 17:04:16 +02:00
Alex Suykov
541c0856a7 configs: chromebook snow: bump to linux 4.6.3
No significant changes but 4.6.3 moved parts of the device tree
into a different file, so dts patch must be updated.

[Peter: explicitly configure kernel headers for 4.6]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-04 17:04:16 +02:00
Alex Suykov
330ac8e6d2 board: add support for Chromebook Snow
Chromebook Snow (Samsung XE303C12) is an Exynos 5 board with
a keyboard, an 11 inch screen and a battery attached.
It is relatively developer-friendly and can run mainline Linux
kernels with little to no effort.

There is barely anything special about this target as far as toolchain
is concerned, but its bootloader only accepts signed kernel images
in a Chromium OS specific format, and is not controllable otherwise.

This config provides a script for building the proper kernel blobs,
and a short manual for booting Buildroot images on this device.

In-tree exynos_defconfig is used for the kernel, with a fragment
to change mwifiex into a module. When built statically, mwifiex
attempts to load its firmware before rootfs is mounted and fails.

[Peter: use BR2_KERNEL_HEADERS_AS_KERNEL=y, lock kernel version,
	enable fit support in u-boot mkimage]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-03 22:24:57 +02:00
Gustavo Zacarias
0240ab7419 configs/qemu: update aarch64 to linux 4.6.3
The console problem goes away with qemu 2.6.0 so it seems it's now a
requirement, update readme.txt accordingly.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-02 15:07:03 +02:00
Peter Korsgaard
1034c11efb a20_ollinuxino: Accommodate U-Boot environment on SD-card
As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout

The space betweem 544KB..1MB is reserved / used for the u-boot environment,
so mark it as such to make sure genimage doesn't put other partitions here.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-02 13:19:12 +02:00
Peter Korsgaard
bc0eab7d1d pcduino: Accommodate U-Boot environment on SD-card
As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout

The space betweem 544KB..1MB is reserved / used for the u-boot environment,
so mark it as such to make sure genimage doesn't put other partitions here.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-02 13:19:12 +02:00
Peter Korsgaard
42c882ba21 orangepipc: Accommodate U-Boot environment on SD-card
As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout

The space betweem 544KB..1MB is reserved / used for the u-boot environment,
so mark it as such to make sure genimage doesn't put other partitions here.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-02 13:19:12 +02:00
Alexey Brodkin
0ce3963a62 cubieboard2: Accommodate U-Boot environment on SD-card
According to current "include/configs/sunxi-common.h"
U-Boot environment is stored on SD-card with offset 544 kB
and its size is limited as 128 kB.

Given memory layout of sunxi boards:
  1. SPL
  2. U-Boot
  3. U-Boot environment
  4. Partitions

(see http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout for details)

we need to make sure the first real partition starts at least
with 544+128 kB offset. Adding a small safety gap let's put
the first partition with offset 1MB from the beginning of SD-card.

Otherwise current setup gets broken as soon as one saves U-Boot
environment with "saveenv" which basically overwrites FAT partition with
zImage and board no longer boots into Linux kernel.

[Peter: extend description, add padding to u-boot partition instead]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Carlos Quijano <carlos@crqgestion.es>
Cc: Andi Shyti <andi@etezian.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-02 13:19:12 +02:00
Vicente Olivert Riera
e1452c5d4f configs/qemu_mips64r6el_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-01 14:59:29 +02:00
Vicente Olivert Riera
cddb4c7cea configs/qemu_mips64r6_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-01 14:59:25 +02:00
Vicente Olivert Riera
9f2d1a9ed4 configs/qemu_mips32r6el_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-01 14:59:20 +02:00
Vicente Olivert Riera
5301395233 configs/qemu_mips32r6_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-01 14:59:12 +02:00
Vicente Olivert Riera
5e0f466a27 configs/qemu_mipsel_malta_defconfig: rename to qemu_mips32r2el_malta_defconfig
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-01 14:59:07 +02:00
Vicente Olivert Riera
25d7efc85b configs/qemu_mips_malta_defconfig: rename to qemu_mips32r2_malta_defconfig
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-01 14:58:59 +02:00
Ezequiel Garcia
244ffaafd1 minnowboard-max: Enable serial and HDMI consoles
Following what's done in Raspberry Pi's defconfigs, let's
unify the consoles in Minnowboard Max defconfigs, providing
consoles on HDMI and serial port.

[Peter: use tty1 like on rpi]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-28 13:56:25 +02:00
Sergio Prado
e7127d25c5 configs/toradex_apalis_imx6_defconfig: new board
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-15 23:23:41 +02:00
Ludovic Desroches
f075afcbd6 board/atmel: update documentation with development defconfigs
Add a description of the development defconfig files.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-12 21:39:38 +02:00
Sergey Matyukevich
3f7c3c3c25 configs: add support for LinkSprite pcDuino
Add basic support for LinkSprite pcDuino board series
including pcDuino, pcDuino-Lite, pcDuino-Lite-WiFi.
Tested on pcDuino-Lite-WiFi.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-12 18:39:55 +02:00
Joao Pinto
234d81bf33 configs/arm_juno: add support for Juno r2
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-09 22:04:35 +02:00
Fabio Estevam
88b4fca2ae configs: new configuration for i.MX25 PDK
Add support for i.MX25 PDK board using U-boot 2016.05 and
kernel 4.6.1.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-08 23:26:56 +02:00
Fabio Estevam
7e64abdb8d configs: new configuration for NXP i.MX51 EVK
Add a new configuration for NXP i.MX51 EVK based on U-boot 2016.05
and kernel 4.6.1.

U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.

We can remove this patch in the future when we switch to U-boot 2016.07.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-08 23:26:12 +02:00
Gustavo Zacarias
d7eb5c56bb configs/qemu: bump to latest version
Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.5.6   2.5.0           YES     OK (4)
arm_versatile           4.6.1   2.5.0           YES     OK
arm_vexpress            4.6.1   2.5.0           YES     OK
m68k_mcf5208            4.6.1   2.5.0           YES     OK
m68k_q800               4.6.1   q800-v2.4.0     NO (3)  OK
microblazebe            4.6.1   2.5.0           YES     OK
microblazeel            4.6.1   2.5.0           YES     OK
mips64el_malta          4.6.1   2.5.0           YES     OK
mips64_malta            4.6.1   2.5.0           YES     OK
mipsel_malta            4.6.1   2.5.0           YES     OK
mips_malta              4.6.1   2.5.0           YES     OK
ppc_g3beige             4.6.1   2.5.0           YES     OK
ppc_mpc8544ds           4.6.1   2.5.0           YES     OK
ppc_virtex_ml507        4.6.1   2.5.0           NO      OK
ppc64_pseries           4.6.1   2.5.0           YES     OK
sh4                     4.6.1   2.5.0           YES     OK
sh4eb                   4.6.1   2.5.0           NO (1)  OK
sparc_ss10              4.6.1   2.5.0           YES     OK
sparc64_sun4u           4.6.1   2.5.0           YES     OK
sparc_sun4u             4.6.1   2.5.0           YES     OK
x86                     4.6.1   2.5.0           YES     OK
x86_64                  4.6.1   2.5.0           YES     OK
xtensa_lx60             4.6.1   2.6.0           YES     OK (2)
xtensa_lx60_nommu       4.6.1   2.6.0           YES     OK (2)

(1) - Probably an endian issue with 8139 emulation/driver
(2) - Linux 4.5/4.6 doesn't work with older Qemu versions
(3) - There's a network interface, but enabling it in qemu fails
(4) - Console looks dead in 4.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-08 22:23:33 +02:00
Ezequiel Garcia
828c4ab06c configs/beaglebone: Add missing genimage.cfg file
Commit 7d0b7d3c27 ("configs/beaglebone: Use genimage
to produce the SD card image") introduce genimage usage,
but forgot to add the genimage config file. Fix it.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-07 21:31:08 +02:00
Ezequiel Garcia
7d0b7d3c27 configs/beaglebone: Use genimage to produce the SD card image
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas: added host dosfstools to the defconfig, needed to build a SD
card image with genimage when a FAT partition is listed in the
genimage configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-06 22:38:19 +02:00
Vincent Stehlé
7bdbee2311 configs/minnowboard_max: bump kernel to 4.6.1
Also, rebase kernel config and adapt kernel command line in grub config file
to follow mmc numbering change.

[Peter: drop now unused linux-4.4.config]
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-06 21:39:06 +02:00
Joao Pinto
f3106fd611 configs/arm_juno: adding CMA support to the kernel
This patch adds CMA to the juno's default kernel config that is in
board/arm/juno. This is critical if the user decides to config video
resolution to 1920x1080.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-03 20:08:45 +02:00
Gustavo Zacarias
4e4545246f configs/pc_x86_64_{bios, efi}_defconfig: new samples
Add two new sample defconfigs oriented towards real PC targets.

It adds two variants for BIOS and EFI boot strategy.

On the build side we enable eudev to autoload relevant kernel
modules/support when necessary.

It adds a bunch of drivers and extra filesystem support which is by no
means extensive/complete, mostly geared towards the hardware i've got at
hand to test with.
This is accomplished by adding on top of the Qemu x86_64 kernel sample
config.

Build connman since by using eudev network interfaces get renamed on
boot thus complicating any form of automatic and friendly bringup.
It also makes Wi-Fi configuration/support easier.

In principle these base defconfigs should work just fine for other
storage media != pendrive like sata or ssd disk, however driver support
isn't there quite yet, and pendrive is mostly supported by usb storage
plus the usual usb host controller drivers.

Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-03 20:02:08 +02:00
Fabio Estevam
ee1ea82116 imx53loco: Fix post-image.sh permission
Fix post-image.sh permission to avoid the following error:

>>>   Executing post-image script board/freescale/imx53loco/post-image.sh
/bin/bash: board/freescale/imx53loco/post-image.sh: Permission denied

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-03 09:50:35 +02:00
Peter Korsgaard
577021e81b Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-01 17:55:16 +02:00
Fabio Estevam
dd2e328089 configs: mx53loco: use genimage to generate sdcard image
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-31 21:27:47 +02:00
Fabio Estevam
88c514a56a configs: mx53loco: Update bootloader and kernel versions
Update U-boot to the 2016.05 version and the kernel to 4.6.

U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.

We can remove this patch in the future when we switch to U-boot 2016.07.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-31 21:26:55 +02:00
Fabio Estevam
0a2d57596e warpboard: README: Fix a few typos
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-30 09:33:43 +02:00
Peter Korsgaard
9cacb5be84 boards: add roseapple pi board support
Add basic support for the roseapple pi board, a SBC in a RPI form factor
with an Actions Semiconductor S500 SoC. For details, see:

http://roseapplepi.org/

The vendor kernel unfortunately needs a minor patch to build the XHCI
driver, so include it here.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-26 10:35:55 +02:00
Fabio Estevam
35a24c6f0f post-image: Do not hardcode the genimage.cfg path
Instead of hardcoding the genimage.cfg path, let's add a BOARD_DIR
variable to improve readability.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-13 22:36:09 +02:00
Fabio Estevam
205f80b894 configs: new configuration for NXP i.MX7 SabreSD
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-13 22:01:01 +02:00
Fabio Estevam
602c76cb8b imx6ulevk: readme: Update the rootfs type to ext4
Since commit 2f37ef48e8 ("configs/imx6ulevk: Use ext4 as filesystem type")
the rootfs type is ext4, so update the readme.txt accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-11 22:22:02 +02:00
Waldemar Brodkorb
cc72cf2ca6 m68k: fix open issues with qemu coldfire
Enable kernel drivers for networking and add a simple
busybox config with basic network tools.

Add kernel patch from Linux git to fix hush segfaults while
using signal handler.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-11 15:27:15 +02:00
Yann E. MORIN
ee50eb8ad3 boards/raspberrypi0: new board
Add support for the rpi-0, which is basically a rpi (model A+) in a
smaller form-factor.

This one does not have an ethernet port, so we just remove it from the
configuration (or we could use the existing rasbperrypi_defconfig and
suffer from a longer boot time because of the waiting for eth0).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-08 15:54:30 +02:00
Fabio Estevam
2f37ef48e8 configs/imx6ulevk: Use ext4 as filesystem type
Extend the filesystem type to ext4.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-08 15:01:52 +02:00
Julien BOIBESSOT
e994eaeaab board: add a readme for Armadeus boards
Common readme.txt for all supported Armadeus boards.

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: minor tweaks in the readme.txt]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-06 15:13:15 +02:00
Gustavo Zacarias
23cc2cfbf9 configs/freescale_mpc8315erdb: bump to kernel 4.5.3
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-05 22:19:11 +02:00
Gustavo Zacarias
fe475a5940 configs/qemu: bump to the latest version
Results table:

Defconfig               Kernel          Qemu        Network Status
------------------------------------------------------------------
aarch64_virt            4.5.3           2.5.0         YES     OK
arm_versatile           4.5.3           2.5.0         YES     OK
arm_vexpress            4.5.3           2.5.0         YES     OK
m68k_mcf5208            4.5.3           2.5.0         NO      SO-SO (3)
m68k_q800               4.5.3           q800-v2.4.0   NO (4)  OK
microblazebe            4.5.3           2.5.0         YES     OK
microblazeel            4.5.3           2.5.0         YES     OK
mips64el_malta          4.5.3           2.5.0         YES     OK
mips64_malta            4.5.3           2.5.0         YES     OK
mipsel_malta            4.5.3           2.5.0         YES     OK
mips_malta              4.5.3           2.5.0         YES     OK
ppc_g3beige             4.5.3           2.5.0         YES     OK
ppc_mpc8544ds           4.5.3           2.5.0         YES     OK
ppc_virtex_ml507        4.5.3           2.5.0         NO      OK
ppc64_pseries           4.5.3           2.5.0         YES     OK
sh4                     4.5.3           2.5.0         YES     OK
sh4eb                   4.5.3           2.5.0         NO (1)  OK
sparc_ss10              4.5.3           2.5.0         YES     OK
sparc64_sun4u           4.5.3           2.5.0         YES     OK
sparc_sun4u             4.5.3           2.5.0         YES     OK
x86                     4.5.3           2.5.0         YES     OK
x86_64                  4.5.3           2.5.0         YES     OK
xtensa_lx60             4.4.9           2.5.0         YES (2) OK
xtensa_lx60_nommu       4.4.9           2.5.0         YES (2) OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5
(3) - It boots, you can login, but apps exit/crash often
(4) - There's a network interface, but enabling it in qemu fails

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-05 15:41:32 +02:00
Waldemar Brodkorb
644d020b65 board: add qemu coldfire support
Add kernel config and defconfig for Qemu Coldfire.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 18:50:46 +02:00
Waldemar Brodkorb
5e1b132495 move busybox-minimal.config to be used by other noMMU targets
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 15:28:32 +02:00
Gustavo Zacarias
f282b13a27 qemu/x86*: update instructions to use virtio
Switch the invocation command to use virtio-blk and virtio-net for
better performance.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 14:58:10 +02:00
Gustavo Zacarias
51501c0e85 qemu/x86*: enable virtio for kernel config
It has better performance for block and net.
Enable virgl (DRM_VIRTIO_GPU) support for 3D acceleration.
And also DRM_BOCHS for better stdvga acceleration.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 14:56:34 +02:00
Gustavo Zacarias
1f85a91221 qemu/x86: use symlinked kernel config
It's exactly the same as the x86_64 variant so just create a symlink.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 14:56:27 +02:00
Ubaldo Porcheddu
b159b15d07 configs: add Raspberry Pi 3 defconfig
So far identical to the rpi2 one except for the dts file as the SW runs in
32bit mode.

[Peter: extend commit message]
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-25 14:07:58 +02:00
Brian Kim
ff5ea2f636 board: add support for Hardkernel ODROID-C2 Board
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is
one of the most cost-effective 64bit development boards available in the
ARM world.

http://www.hardkernel.com/main/products/prdt_info.php?g_code=G145457216438

[Peter: fix typos, drop neon/C++ settings, use git hash for Linux/U-Boot]
Signed-off-by: Brian Kim <brian.kim@hardkernel.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-23 22:15:44 +02:00
Damien Riegel
56047fa97d board: rename ts to technologic
Other projects, such as Linux [1] and U-Boot [2], use "technologic" for
this manufacturer. To be more consistent across all of them, rename the
board/ts folder to board/technologic.

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/vendor-prefixes.txt
[2] http://git.denx.de/?p=u-boot.git;a=tree;f=board/technologic;hb=HEAD

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-21 23:06:08 +02:00
Luca Ceresoli
babf1190b3 raspberrypi, raspberrypi2: document the two consoles (UART+HDMI)
The defconfigs for the Raspberry Pi boards start a console on HDMI in
addition to the classic one on UART. Document this feature in the
readme.

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-19 00:12:23 +02:00
Ezequiel García
e25c603211 board/minnowboard-max: Add a X-based graphical defconfig
This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.

  * The 'openbox' windows manager is chosen because it's simple
    and lightweigth.

  * Basic X apps are enabled (such as xrandr, xterm), so we
    can at least get a console and change video mode.

  * ALSA default configuration is provided, so HDMI audio
    works out-of-the-box.

  * OpenGL is supported.

Tested on Minnoboard Turot (which is Minnowboard Max compatible).

[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Ezequiel García
2fbd5b1f04 board/minnowboard-max: Add more peripherals and features to the kernel
This commit enables support for:
  * HDMI audio
  * Support for user-provided EDID firmware
    (useful to workaround broken monitors)
  * Evdev interface
  * System V IPC (required by ALSA)

The options make the system more useful.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Ezequiel García
5c084e9519 board/minnowboard: Unify Minnowboard and Minnowboard MAX boards
Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.

This commit does the following:

  1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
     and post-image.sh. These are identical to Minnowboard's.

  2) Move Minnowboard MAX's linux config, and rename it.

     It would be lovely to have a single kernel config file.
     The kernel size penalty involved in adding support for
     all the peripherals on both boards is small enough to
     justify this.

     However, the original Minnowboard has some GPIO buttons
     that need to be registered by the kernel. This is not
     upstreamed, and hence we need to use the yocto v3.8 kernel
     to have this support.

  3) Rename each grub config to grub-{board}.cfg.

  4) Modify (the now unique) post-build script to use
     a different grub config, according to the board.

  5) Update both defconfigs, as per the above changes.

  6) Finally, update the readme.txt.

[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Ezequiel García
54ec0e2a74 board/minnowboard: Rework to generate SD card image
Let's rework the board and config files to use genimage
to generate the SD card image directly.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Max Filippov
20e738bc3f configs: add qemu_xtensa_lx60_nommu_defconfig
Add noMMU configuration running on dc233c MMUv3 core with identity
memory map.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-18 21:25:38 +02:00
Max Filippov
8f82d0185b configs/qemu_xtensa_lx60_defconfig: switch to dc233c
dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-18 21:25:16 +02:00
Luca Ceresoli
20878a1017 raspberrypi, raspberrypi2: add a serial console
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.

This requires three changes:
 1. have two 'console=' entries in the kernel command line: tty1,
    then ttyAMA0;
 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
    a getty on the last console= passed to the kernel, ttyAMA0;
 3. add a new getty on tty1 to the generated inittab.

Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.

Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.

Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.

The result is these two inittab lines:

  console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL
  tty1::respawn:/sbin/getty -L  tty1 0 vt100 # HDMI console

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-18 13:36:11 +02:00
Lee Jones
04d0a5793f configs/stm32f469_disco: new configuration for STM32F469 Discovery board
Similar to stm32f429_disco, this commit adds a configuration for the
Cortex-M4 based STM32F469 platform.

It requires a few kernel patches, which have already been submitted
upstream, as well as a small OpenOCD patch. Besides that, it re-uses
most of what has been added for the STM32F429 platform.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
 - squash multiple patches from Lee Jones into one
 - improve the readme.txt file
 - sync the defconfig with the adaptations made to the stm32f429
   configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-16 12:44:07 +02:00
Lee Jones
c8ad46a1a7 configs/stm32f429_disco: new configuration for STM32F429 Discovery board
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.

This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:

 - A minimal Busybox configuration, which is small enough to boot
   without causing OOM on such small noMMU platforms. The resulting
   Busybox, statically linked with uClibc-ng, weights around 220
   KB. For now, this file is located in board/stmicroelectronics/, but
   we might consider moving it to package/busybox/ in the future if
   needed.

 - A post-build script that removes the mounting of /dev/pts (not
   enabled in the kernel and not very useful for a system that has no
   network and no X), and removes the network related init script and
   configuration files (no network support).

 - A flash.sh script, to perform the right OpenOCD invocations to
   reflash the board.

 - One small kernel patch to adjust the kernel command line in the
   Device Tree, since it's the only way to do so.

 - The usual readme.txt file.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
 - squashed multiple patches from Lee Jones together
 - added the minimal Busybox configuration
 - added the post-build script
 - improved the flashing script to not hardcode the location of the
   output directory
 - add the small kernel patch
 - improve the readme.txt file
 - test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-16 12:43:28 +02:00
Ludovic Desroches
ce86f9eaf2 board/atmel: update documentation for SD card generation
Henceforth, a sdcard.img file is automatically generated. It simplifies the
procedure to generate a bootable SD card for Atmel Xplained boards.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:48 +02:00
Ludovic Desroches
89155c8492 configs: atmel: add sama5d3 xplained sd card image generation
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:44 +02:00
Ludovic Desroches
6e9bd4a2bc configs: atmel: add sama5d4 xplained sd card image generation
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:42 +02:00
Ludovic Desroches
7aca6ab788 configs: atmel: add sama5d2 xplained sd card image generation
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:37 +02:00
Ezequiel García
e88c82f30d board/minnowboard-max: Rework to generate SD card image
Let's rework the board and config files to use genimage
to generate the SD card image directly.

[Peter: add host-mtools for genimage vfat handling]
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-13 23:06:36 +02:00
Masahiro Yamada
c13f896686 configs: rename Zynq defconfig files
These three are Zynq boards and the build procedure is almost the
same.  Having the SoC name prefix "zynq_" would be more consistent.
Also, this is the way in which the Linux Device Trees and the U-Boot
configuration files do.

This commit renames as follows:

   zedboard_defconfig     -> zynq_zed_defconfig
   microzed_defconfig     -> zynq_microzed_defconfig
   xilinx_zc706_defconfig -> zynq_zc706_defconfig

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-31 18:40:43 +02:00
Gustavo Zacarias
fdc5f301f8 configs/qemu: enable modules for x86 and x86_64
It's useful for demo configs which have more features, like
automatically loaded (module) drivers.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-29 03:01:44 +02:00
ludovic.desroches@atmel.com
358013d699 board/atmel: merge and update documentation
There were two readme files (one for flashing on NAND and one to create a
SD card) in different places. Merge them and update the SD card
generation part since all Xplained boards are supported and the -u
option of sfdisk is obsolete on latest versions.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: adjust the explanations, move the SD card section after the
NAND flash section.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-24 23:09:04 +01:00
Jan Viktorin
0be56dca27 altera: remove whitespace before colon
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-22 23:59:36 +01:00
Jan Viktorin
1039811491 altera: improve readme to cover both supported boards
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-22 23:47:06 +01:00
Waldemar Brodkorb
3f69339211 qemu-m68k: add new board
Ethernet is not working, but at least you get a shell and
can test applications for m68k.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-20 15:28:55 +01:00
Gustavo Zacarias
de5906a384 configs/qemu: bump to the latest linux versions
arm_versatile kernel defconfig updated to deal with multi-platform ARM
support and driver changes.

mips(el) 32-bits is back in working order for 4.5

Results table:

Defconfig               Kernel          Qemu    Network Status
--------------------------------------------------------------
aarch64_virt            4.5             2.3.0   YES     OK
arm_versatile           4.5             2.3.0   YES     OK
arm_vexpress            4.5             2.3.0   YES     OK
microblazebe            4.5             2.3.0   YES     OK
microblazeel            4.5             2.3.0   YES     OK
mips64el_malta          4.5             2.3.0   YES     OK
mips64_malta            4.5             2.3.0   YES     OK
mipsel_malta            4.5             2.3.0   YES     OK
mips_malta              4.5             2.3.0   YES     OK
ppc_g3beige             4.5             2.3.0   YES     OK
ppc_mpc8544ds           4.5             2.3.0   YES     OK
ppc_virtex_ml507        4.5             2.3.0   NO      OK
ppc64_pseries           4.5             2.3.0   YES     OK
sh4                     4.5             2.3.0   YES     OK
sh4eb                   4.5             2.3.0   NO (1)  OK
sparc_ss10              4.5             2.3.0   YES     OK
sparc64_sun4u           4.5             2.3.0   YES     OK
sparc_sun4u             4.5             2.3.0   YES     OK
x86                     4.5             2.3.0   YES     OK
x86_64                  4.5             2.3.0   YES     OK
xtensa_lx60             4.4.5           2.3.0   YES (2) OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5 so stick to 4.4.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-14 22:14:56 +01:00
Phil Eichinger
0b7b84310c olimex_imx233_olinuxino_defconfig: genimage support
* add a post-image.sh script
* update defconfig for genimage
* update readme.txt

[Peter: also add host-dosfstools dependency for vfat partition]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-11 13:14:54 +01:00
Gustavo Zacarias
bba75771fe configs/qemu/x86: enable USB support
We're not trying to be minimal here, and qemu can bridge/emulate certain
usb devices, so enable the different controllers and at least usb
storage.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-09 22:11:53 +01:00
Gustavo Zacarias
4bff48a200 configs/qemu/x86_64: enable USB support
We're not trying to be minimal here, and qemu can bridge/emulate certain
usb devices, so enable the different controllers and at least usb
storage.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-09 22:11:51 +01:00
Phil Eichinger
0e21743fe3 configs/olimex_imx233_olinuxino: switch to u-boot
mxs-bootlets broke somewhere in between toolchain version bumps, leading to
boot failure.

Directly boot u-boot, as this is supported now, but it requires updated
partitioning (see readme.txt)

Drop mxs-bootlets patches, they aren't needed anymore.

Kernel is built as an uImage because the u-boot defconfig expects an
uImage on the second partition.

Tested on iMX233-OLinuXino-MINI hardware.

[Peter: adjust readme/config as suggested by Arnout]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-06 21:10:23 +01:00
Gary Bisson
85721034ae board/boundarydevices: rename folder and update readme
It didn't make sense to keep the U-Boot scripts and post build/image
scripts under the nitrogen6x folder since they apply for all our
platforms.

Also update the readme.txt to make it clearer which defconfig should
be used depending on the platform targeted.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-03 17:42:14 +01:00
Gary Bisson
c753aa226d board/boundarydevices: update u-boot scripts for i.MX7 support
Also remove useless tfp410 enablement since a basic kernel driver has
been added.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-03 17:41:16 +01:00
Peter Korsgaard
28cd1ed30a Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-02 21:25:00 +01:00
Masahiro Yamada
addc23ef6b configs/arm_foundationv8: bump to Linux 4.4.3
Bump to the latest kernel with DT path adjustment because Linux
commit ca5b34100c57 ("dts, arm64: Move dts files to vendor subdirs")
moved the DT file to the vendor sub-directory.

This commit was tested with the latest model (FVP v8 Foundation
Platform 9.5 build 41), so I updated the instruction in readme.txt
corresponding to it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-26 19:43:33 +01:00
Peter Korsgaard
16fc95d5a1 pandabord: use genimage to generate sdcard image
And drop the manual sdcard generation description from the readme.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-26 15:56:12 +01:00
Peter Korsgaard
55fad2b5b6 configs: pandaboard: bump u-boot to 2016.01 and kernel to 4.4.3 and use ext4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-26 15:52:44 +01:00
Sergio Prado
000b972f49 configs: pandaboard: bump u-boot to 2015.10 and kernel to 4.3
VFPv3 and NEON was enabled and a readme.txt file was added.

Fixes bug #7580.

Tested on Pandaboard ES.

[Peter: use EABIhf]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-25 23:31:36 +01:00
Luca Ceresoli
a59dc492f0 olimex_a20_olinuxino_*: remove old SD writing instructions
Now that all the boards have been converted to use genimage, the old
instructions on how to partition and write an SD card are useless.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-24 23:44:02 +01:00
Luca Ceresoli
ae13fd947b olimex_a20_olinuxino_lime2: update to use genimage
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-24 23:43:51 +01:00
Luca Ceresoli
65301a472e olimex_a20_olinuxino_lime: update to use genimage
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Francois Perrad <fperrad@gmail.com>
Tested-by: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-24 23:43:37 +01:00
Luca Ceresoli
316215a746 olimex_a20_olinuxino_micro: update to use genimage
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-24 23:43:15 +01:00
Luca Ceresoli
937568ea4d olimex/a20_olinuxino: update readme.txt with lime2 info
[Peter: fix typo, s/AllWinner/Allwinner/]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-24 21:40:33 +01:00
Peter Korsgaard
2b23ab47ad board/calao: drop remaining snowball files
Commit b3fa8e24 (configs: remove calao_snowball_defconfig) dropped the
outdated snowball defconfig, but forgot to remove the board files.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-22 12:12:11 +01:00
Ariel D'Alessandro
803539e77c board/firefly_rk3288: add new board
This commit adds basic configuration files for the Firefly RK3288 board.
Both minimal and demo defconfigs are added. The latter enables Qt5 with
the required Mali T76X GPU user space components.

More info about the board:
http://en.t-firefly.com/en/firenow/firefly_rk3288/specifications/

[Peter: use same-as-kernel for kernel headers]
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-20 12:06:40 +01:00
Angelo Compagnucci
e173aeece5 board: Add support for Acmesystems Arietta g25
This patch adds a minimal working configuration for
Acmesystems Arietta g25.

[Peter: fix whitespace, use same-as-kernel for kernel headers version]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-17 17:00:59 +01:00
Gustavo Zacarias
5825f1036a configs/qemu: convert versatile to dt
As a followup to http://patchwork.ozlabs.org/patch/548550/ fully convert
the versatile defconfig to create the dtb and update the instructions.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-08 12:12:55 +01:00
Gustavo Zacarias
a10562c1a1 configs/qemu: drop arm nuri
This config has no prospect of going into the future (by using DTS), and
qemu doesn't do a good job at emulating it (networking problems), so
drop it.
All of the ARM SMP testing duties are now in the vexpress defconfig
which is better suited/supported.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-08 12:12:49 +01:00
Gustavo Zacarias
c06ec1e397 configs/qemu: update arm-vexpress instructions for SMP
We can use the vexpress arm defconfig to test SMP features in Qemu.
So document the necessary invocation changes to account for this, in
preparation of the arm nuri defconfig removal.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-08 12:12:42 +01:00
Gustavo Zacarias
93c640f005 configs/qemu: bump to the latest linux versions
Keep arm_nuri on 3.10.x for the usual reasons.
Keep mips & mipsel (32 bits) on 4.3.x because 4.4.x fails to boot
properly (kernel stuck after the CPU cache info).

Results table:

Defconfig               Kernel          Qemu    Network Status
--------------------------------------------------------------
aarch64_virt            4.4.1           2.3.0   YES     OK
arm_nuri                3.10.96         2.3.0   YES(1)  OK most times(2)
arm_versatile           4.4.1           2.3.0   YES     OK
arm_vexpress            4.4.1           2.3.0   YES     OK
microblazebe            4.4.1           2.3.0   YES     OK
microblazeel            4.4.1           2.3.0   YES     OK
mips64el_malta          4.4.1           2.3.0   YES     OK
mips64_malta            4.4.1           2.3.0   YES     OK
mipsel_malta            4.3.5           2.3.0   YES     OK (4)
mips_malta              4.3.5           2.3.0   YES     OK (4)
ppc_g3beige             4.4.1           2.3.0   YES     OK
ppc_mpc8544ds           4.4.1           2.3.0   YES     OK
ppc_virtex_ml507        4.4.1           2.3.0   NO      OK
ppc64_pseries           4.4.1           2.3.0   YES     OK
sh4                     4.4.1           2.3.0   YES     OK
sh4eb                   4.4.1           2.3.0   NO(3)   OK
sparc_ss10              4.4.1           2.3.0   YES     OK
sparc64_sun4u           4.4.1           2.3.0   YES     OK
sparc_sun4u             4.4.1           2.3.0   YES     OK
x86                     4.4.1           2.3.0   YES     OK
x86_64                  4.4.1           2.3.0   YES     OK
xtensa_lx60             4.4.1           2.3.0   YES     OK

(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 starts it fails to work properly
(3) - Probably an endian issue with 8139 emulation/driver
(4) - Kernel stuck at cpu cache details from 4.4 - 4.4.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-07 22:20:41 +01:00
Luca Ceresoli
43a4ed5d84 board/atmel/xplained/readme.txt: fix u-boot filename
The file that is actually produced is called u-boot-spl.bin, not
uboot-spl.bin.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-07 22:19:26 +01:00
Joao Pinto
e9b147ffa4 board: add support for ARM Juno r0 and r1 Development Boards
The Juno ARM Development Platform (ADP) is a software development
platform for ARMv8-A, it includes the Juno Versatile Express board
and an ARMv8-A reference software port available through Linaro.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-04 21:55:00 +01:00
Gustavo Zacarias
1dbc3c30a2 configs/raspberrypi: add dtb for compute module
[Peter: describe what 'CM' stands for, update comment]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-01 21:26:45 +01:00
Julien BOIBESSOT
6a05724723 board: add support for Freescale i.MX6UL Evaluation Kit
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: simplify exit logic of post-image script.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-01-31 23:43:26 +01:00
Gary Bisson
7df1e23cc6 configs/nitrogen6*: update to use genimage
Also updating the documentation with the dd instruction to flash the
bootable media.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-01-31 21:03:55 +01:00
Eelco Chaudron
dbae4d1e04 configs/orangepi: Changing Linux kernel to v4.5-rc1
[Peter: use tarball for Linux kernel, use 4.4 kernel headers]
Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-01-29 17:50:11 +01:00
Peter Korsgaard
34d25ae735 orangepipc: readme.txt: fix typo
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-01-17 22:55:25 +01:00
Peter Korsgaard
a664fc74ea configs/minnowboard_max: bump kernel to version 4.4
And point the readme to wiki.minnowboard.org instead of the legacy
elinux.org page.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-01-14 21:40:26 +01:00
Gustavo Zacarias
1968440f35 configs/qemu: enable SMP for x86 & x86_64
This is the 21st century, so enable SMP for them.

[Peter: add note to readme.txt about how emulate a SMP system in QEMU]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-01-08 19:04:23 +01:00
Gustavo Zacarias
8dd797a054 configs/raspberrypi*: update them to use genimage
Update the raspberrypi and raspberrypi2 configs to use genimage directly
to build the image.
Update the documentation to reflect this, and drop the volatile rootfs
option since it doesn't make much sense and it's not easily integrated
with the genimage configurations.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-12-31 15:22:48 +01:00
Eelco Chaudron
1354803789 configs: add readme.txt for the orangepipc defconfig
[Thomas: minor tweaks.]

Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-12-29 18:05:15 +01:00
Erico Nunes
53c1dadbcc configs: update cubieboard2 defconfig
This patch updates the Cubieboard2 board defconfig to use newer u-boot
and linux versions, along with a few other improvements.
The other improvements were mostly backported from the recent Orange Pi
defconfig inclusion and are related to image generation.
linux-sunxi.org was used as a reference for both linux and u-boot
defconfig names.

In detail:
- Update linux to vanilla upstream -- currently 4.3.3 is the most
up-to-date. Although it lacks some features present only in the
linux-sunxi 3.4 branch, upstream support appears to be relatively mature
and is already being deployed by default by distributions such as Arch
Linux ARM.
- Update u-boot to vanilla upstream 2015.10. According to
linux-sunxi.org, upstream fully supports major functions (except NAND)
since 2015.07.
- Change image format to zImage and drop custom image generation script
in favour of genimage, as pointed out by reviewers in the Orange Pi
defconfig submission.

This was tested in a Cubieboard2 board with boot from mmc and it boots
fine to login prompt.

This has not been tested in a Cubieboard (A10) as I don't own any; the
version bumps probably apply to it although there are some differences
(lack of VFPv4 support, Cortex-A8 instead of Cortex-A7), so I have kept
the current Cubieboard defconfig and its scripts. This one has been only
build-tested.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-12-29 18:03:22 +01:00
Eelco Chaudron
d7327c69c8 configs: new orangepipc_defconfig
This commit adds a configuration for the Orange Pi PC board,
<http://www.orangepi.org/orangepipc/>.

Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-12-28 18:05:14 +01:00
Gary Bisson
a8bbc1f47f atmel: fix xplained documentation
Documentation is referring to nandflash.txt which doesn't exist.
Instead, readme.txt provides the instructions to flash the NAND storage.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-12-10 21:50:26 +01:00
Gustavo Zacarias
122d613b57 configs/qemu: specify drive image file format (raw)
Specify that the drive image file format is raw to avoid warnings and
restrictions.
Also switch to -drive syntax for all configs.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-12-04 21:26:56 +01:00
Peter Korsgaard
cc257ee493 Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-12-01 23:24:07 +01:00
Thomas Petazzoni
4bb1d97b11 configs/arm_foundationv8: fix build and update documentation
The arm_foundationv8_defconfig currently doesn't build because it uses
an external AArch64 toolchain that has been updated (Linaro toolchain)
and is now based on gcc 5.x. Unfortunately, Linux 3.13 is too old to
be built with gcc 5.x.

As a minimal fix to make this defconfig build again, we switch to use
the internal toolchain backend. At the time this defconfig was
introduced, there was no support for AArch64 in the internal toolchain
backend, but now that it is available, there is no reason to not use
it. This makes the defconfig also more consistent with the other
defconfigs.

Obviously, the kernel headers used to build the toolchain are set to
the fixed version 3.13, so that they match the kernel being used.

While we're at it, the readme.txt file corresponding to this defconfig
is updated. Runtime testing has been performed with the latest version
of the ARM Foundation model.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-22 20:11:51 +01:00
Ray Kinsella
167cda0fac board: readme.txt for Intel Galileo Gen 1/2
Created a readme.txt for the Intel Galileo Gen 1/2 that describes,

 * How to build for the Intel Galileo Gen 1/2
 * How to access the console on the Intel Galileo Gen 1/2

Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-18 21:55:38 +01:00
Ray Kinsella
8715e18e93 board: add support for Intel Galileo Gen 2
Board support package includes:

 * Toplevel build root configuration
 * Github based 3.8.7 Kernel
  * Upstream 3.8.7
  * Linux 3.8.7 Kernel Driver Patches
 * Linux 3.8.7 configuration
 * Grub configuration
 * Init Script to load modules
 * genimage config to create sdcard image.

[Thomas: simplify post-image script since there is now only one call
to genimage.]

Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-17 23:24:32 +01:00
Gustavo Zacarias
90d1299a18 configs/qemu: enable tmpfs for microblaze
Otherwise the tmpfs-backed filesystems fail:
mount: mounting tmpfs on /dev/shm failed: Invalid argument
mount: mounting tmpfs on /tmp failed: Invalid argument
mount: mounting tmpfs on /run failed: Invalid argument

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-17 21:20:53 +01:00
Gustavo Zacarias
dd5f8b25d4 configs/qemu: fix networking for sparc64
It contained a typo that prevented the driver from being built.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-17 21:20:48 +01:00
Gustavo Zacarias
fdb35ce73e configs/qemu: bump x86 to 4.3 kernel
Now that uclibc-ng was bumped to version 1.0.9 nothing prevents x86
from working correctly.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-17 21:20:44 +01:00
Gwenhael Goavec-Merou
d761f0f408 zedboard: uboot: load env earlier
By default, with the original patch bootcmd runs sdboot before loading uEnv.txt.
Consequently, if the user change modeboot, the user's defined content is updated
too late.
By loading uEnv.txt before 'run $modeboot' the correct boot mode is used instead
of default mode.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Acked-By: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-16 21:53:48 +01:00
Gustavo Zacarias
bb16580a46 configs/qemu: bump to the latest linux version
ppc-mpc8544ds: switch to custom kernel config since the new 4.3-shipped
mpc85xx_basic_defconfig doesn't work with Qemu.
Incidentally while cleaning it up it now seems to work fine with newer
qemu versions.

sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000
driver which works fine.

x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc
(any variant) based toolchains.

Results table:

Defconfig               Kernel          Qemu    Network Status
--------------------------------------------------------------
aarch64_virt            4.3             2.3.0   YES     OK
arm_nuri                3.10.93         2.3.0   NO(1)   OK(2)
arm_versatile           4.3             2.3.0   YES     OK
arm_vexpress            4.3             2.3.0   YES     OK
microblazebe            4.3             2.3.0   YES     OK
microblazeel            4.3             2.3.0   YES     OK
mips64el_malta          4.3             2.3.0   YES     OK
mips64_malta            4.3             2.3.0   YES     OK
mipsel_malta            4.3             2.3.0   YES     OK
mips_malta              4.3             2.3.0   YES     OK
ppc_g3beige             4.3             2.3.0   YES     OK
ppc_mpc8544ds           4.3             2.3.0   YES     OK
ppc_virtex_ml507        4.3             2.3.0   NO      OK
ppc64_pseries           4.3             2.3.0   YES     OK
sh4                     4.3             2.3.0   YES     OK
sh4eb                   4.3             2.3.0   NO(1)   OK
sparc_ss10              4.3             2.3.0   YES     OK
sparc64_sun4u           4.3             2.3.0   YES     OK
sparc_sun4u             4.3             2.3.0   YES     OK
x86                     4.2.6           2.3.0   YES     OK(3)
x86_64                  4.3             2.3.0   YES     OK
xtensa_lx60             4.3             2.3.0   YES     OK

(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 runs it fails to start properly
(3) - linux 4.3.0 doesn't like uclibc-based toolchains (net issues)

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-11 23:36:39 +01:00
Vincent Stehlé
f8208503d4 configs: add Freescale i.MX6 SoloX Sabre SD support
The i.MX6 SoloX SABRE board for smart devices is Freescale's reference design
board based on the heterogeneous ARM Cortex-A9 + Cortex-M4 i.MX6 SoloX
applications processor.

This defconfig is inspired from previous freescale_imx6*sabresd_defconfig, and
is based on Freescale "official" git repo on git.freescale.com and SW release
3.10.53_1.1.0_ga.

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-04 22:50:35 +01:00
jpinto
7e8fc6c293 configs: add support for Synopsys VDK Software Development Platform
The Virtualizer Development Kit (VDK) Family for ARM Cortex Products
consists of a set of virtual prototypes that provide a virtualizer for
the ARM core variants. The VDK is a standalone package that runs on an
host computer.

[Thomas: drop the following options, which as noted by Arnout, are not
needed:
 - BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 - BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
 - BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y.]

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-03 23:45:28 +01:00
Gustavo Zacarias
fdc63dc95e configs/mpc8315erdb: bump to linux 4.2.5
Also revamp the kernel config a bit to make it more featured, enabling
SATA ports and storage.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-29 19:56:43 +01:00
Gustavo Zacarias
44bff8962c qemu/x86: enable generic hda codec
Enable the generic hda (sound) codec, necessary for qemu audio to work.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-27 07:34:18 +01:00
Gustavo Zacarias
8da5df7adf qemu/x86_64: enable generic hda codec
Enable the generic hda (sound) codec, necessary for qemu audio to work.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-27 07:34:13 +01:00
Alexey Brodkin
8d9927dd8f board: ARC AXS10x bump Linux kernel to 4.2.4
Linux kernel 4.2.4 now has former out of the tree patch,
see http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.2.y&id=c4e3a29030fce89272f080e7e92c162b24103736

Essentially removing the patch itself.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-25 22:10:48 +01:00
Gergely Imreh
98295c5330 board/via/imx6_vab820: update to latest BSP release
Changes:
* Update Kernel and U-Boot to the latest 2.0.6 BSP release from the
official sources.
* Add genimage config to create bootable SD card image

Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-21 22:40:39 +02:00
Gary Bisson
2367a99661 board/boundarydevices: update 6x_bootscript to use zImage
As suggested by Thomas:
http://lists.busybox.net/pipermail/buildroot/2015-September/139884.html

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-19 22:33:36 +02:00
Bjørn Forsman
9eedc747ab Use portable shebangs (/bin/bash -> /usr/bin/env bash)
"/usr/bin/env bash" is used everywhere else in host tools. These are the
only remaining offenders.

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-19 22:06:06 +02:00
Waldemar Brodkorb
8a150d4f5e qemu: add new board support for qemu-system-sparc64
SPARC64 builds can be tested with Qemu.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-10 12:52:16 +02:00
Gustavo Zacarias
f1d61b04a4 configs/qemu: add sh4eb (big endian) sample
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-09 23:32:10 +02:00
Sergio Prado
0d71ab4172 wandboard_defconfig: bump u-boot to 2015.07 and kernel to 3.14.28_1.0.0
Bump U-boot version to 2015.07 from the mainline repository. Since there
is SPL support for the wandboard in the U-boot 2015.07, it is now
possible to boot the same U-boot image for all wandboard variants
(solo/dual/quad).

Bump kernel version to 3.14.28_1.0.0 from the wandboard git repository.

Tested on Wandboard Solo, Wandboard Dual and Wandboard Quad.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-06 09:51:28 +01:00
Thomas Petazzoni
357cf46f9a configs: fix build of calao_qil_a9260_defconfig
The Barebox, AT91Bootstrap and Linux patches for the Calao QIL A9260
board are all located in the same directory, board/calao/qil-a9260/,
with only a prefix to indicate to which component they apply.

Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).

However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.

This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR for all of Barebox, AT91Bootstrap and Linux
patches.

In addition, the defconfig was not specifying explicitly which Barebox
version to use, so right now it's trying to use Barebox 2015.09, on
which the board-specific patch does not apply. So we've forced to use
Barebox 2012.08, which was the lastest release available at the time
the defconfig was initially contributed.

Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-04 19:05:47 +02:00
Thomas Petazzoni
3cb668d5b5 configs: fix build of calao_usb_a9g20_lpw_defconfig
Both the Barebox and AT91Bootstrap patches for the Calao USB A9G20
board are located in the same directory, board/calao/usb-a9g20-lpw/,
with only a prefix making a difference between whether they apply to
Barebox or AT91Bootstrap.

Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).

However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.

This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR.

Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-04 19:05:27 +02:00
Thomas Petazzoni
d755067b7c configs: remove gnublin_defconfig
This defconfig tries to fetch its kernel source code and U-Boot source
code from gitorious.org, which is not longer available. Therefore,
this defconfig has been failing to build since quite some time. Since
there's no obvious other place to grab the kernel and u-boot source
code, and the defconfig was not updated since a long time, let's
simply get rid of it.

[Peter: also drop README]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-04 19:01:59 +02:00
Jan Viktorin
aa8c11105d olimex_a20_olinuxino_lime2: new board
It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline
kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps.

[Thomas: remove ccache and optimize 2 options.]

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-03 14:50:47 +01:00
Benoît Thébaudeau
61402c9442 imx53loco: fix dangling create-boot-sd.sh symlink
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-09-24 23:51:44 +02:00
Alexey Brodkin
421b938c9f configs: bump ARC axs10x Linux kernel and headers to 4.2 release
Linux kernel 4.2 was finally released, so bumping from 4.2-rc5 to
final release.

Updating Linux headers to 4.2 branch since they are introduced in
Buildroot as well already.

Also adding 1 back-ported patch that makes SD/MMC cards usable on AXS
boards.  This patch will be a part of 4.3 (already in linux-next) and
hopefully will make its way in 4.2.1.

Once that patch appears in 4.2.x it can be removed from here.

Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-20 15:01:20 +02:00
Gary Bisson
9ebb123893 board/boundarydevices: update u-boot scripts for 3.14 kernels
Those scripts will support coming platforms such as iMX6SoloX or
iMX6QuadPlus.

One important change is that the bootscript now relies on U-Boot to
make the display detection in order to simplify the script.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-19 15:41:13 +02:00
Davide Viti
03130f944a microzed: add Avnet Microzed support
Changes are based on Zedboard: Xilinx does not provide a specific DTS
for Microzed in the kernel tree. It is suggested [1] to use the
zynq-zed.dts and change the RAM size

[1] https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856

[Thomas:
 - extend readme.txt to indicate why the same DTB is used for Microzed
   and the Zedboard.
 - add a description + Signed-off-by line in the
   0001-zynq-Create-microzed-specific-U-Boot-environment.patch, by
   re-using the description of the same patch for the Zedboard.]

Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-17 23:54:39 +02:00