The directfb example program df_dok now requires rose.png to be
installed, otherwise it gives the following error:
(#) DirectFBError [dfb->CreateImageProvider( dfb, DATADIR"/rose.png", &provider )]: A general or unknown error occured
Therefore add rose.png to the list of data files if df_dok is enabled.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes "Value too large for defined data type" messages caused by fstat
syscall wrapper returning -EOVERFLOW.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some platforms, the standard U-Boot binary is not called u-boot.bin,
but u-boot<something>.bin. This is for example the case on the
Cavium-provided u-boot, where the output file is called
u-boot_<boardname>.bin.
This patch adds a 'custom format' choice in the existing u-boot binary
format selection, where this name can be put. In the Cavium example, this
option could be set to:
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-$(BR2_TARGET_UBOOT_BOARDNAME).bin"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: fix help text & license, needs host-pkgconf]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
pkg-download.mk contains some helper functions to obtain subparts of URLs,
like the URI scheme. In pkg-generic.mk, there is still one opportunity to use
that helper function, instead of hardcoding it.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The linux kernel and uboot specify -msoft-float in order to prevent floating
point code from being generated. This causes a conflict when -mfloat-abi=hard
or -mfloat-abi options are specified in the wrapper. This patch removes the
-mfloat-abi option from the options generated by the wrapper only when
-msoft-float, -mhard-float or -mfloat-abi are specified by the user.
[Peter: fix !BR_FLOAT_ABI case, simplify]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It runs out of registers, it fails even in official form
(COMPILE_IN_THUMB_MODE=y) so just build it in ARM mode since EABI
mandates interworking.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It runs out of registers, so build it in ARM mode, EABI mandates
interworking so this isn't an issue.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmudflap doesn't build for a thumb(1) toolchain so disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In early buildroot, it apparently was customary to have following style in
Config.in files:
bool"expat"
Nowadays, only two packages remain with this style: diffutils and expat.
This trivial patch lines them up with the style:
bool "expat"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch creates a config option for the ISC DHCP server to allow passing
--enable-delayed-ack to its configure script.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc picks the wrong interpreter for MIPS64/n64.
This patch fixes this problem by checking the selected
MIPS ABI instead of the MIPS variant.
The patch has been committed upstream:
http://git.uclibc.org/uClibc/commit/?id=603af30d6992e94ac30a66b953264076f4f2fd71
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These were required with ARC gcc 4.4.7; ARC gcc 4.8 has been changed
to behave the same as other architectures with -nostdlib, making this
option obsolete.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes multiple issues, including:
- 'operand out of range' errors (due to defaulting to
medium calls instead of short calls)
- library dependencies that were not being found
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If BR_DEBUG_WRAPPER is set in the envirnment, dump the actual command
being exec()uted, to ease debugging issues with the wrapper.
[Peter: adjust code style and output format to be cut'n'paste compatible]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of over-writing the nsswitch.conf file (which may already contain
user's specific configuration if it comes from a custom skeleton), just
replace the 'hosts' line.
Remove now-useless custom nsswitch.conf file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In buildroot, the avahi socket is located in /var/run/avahi-daemon,
not in /usr/var/run/avahi-daemon/socket.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump for a few fixes:
- fix for slow SDcards
- fix for USB interrupts
- fix for tracing functions
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the move of uclibc to package/uclibc, the uclibc-menuconfig target now
depends on uclibc-configure, which brings in the build of
binutils/gcc-initial/mpfr/gmp, causing it to take ages with a clean tree.
Fix it by moving the basic .config mangling to the patch step, and depend
on that for menuconfig instead.
Notice that this is broken for _OVERRIDE_SRCDIR users, just like for
busybox, but as that is presumably a small subset of the buildroot
user base (and these advanced users can just run menuconfig in their
local uClibc tree), so this is considered the lesser evil of the two.
The proposed out-of-tree build series will also cause problems with
this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 6b3a0417c4 ('arch/arm: arm926 may have VFP') forgot to update
the help text of the VFPv2 option to mention ARMv5. This commit fixes
that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With modern shells, we can simply do test using the "$(...)" = "value"
form. This commit gets rid of the x$(...) = x"value" constructs and
replaces == by =, which is the correct operator to test the equality
of two strings with the test program.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following the introduction of the support of EABIhf as a second ARM
ABI, it is important to check whether the external toolchain provided
by the user actually uses the ABI that has been selected in the
Buildroot configuration. This commit introduces such a check by
looking at the 'Tag_ABI_VFP_args' tag of the architecture-specific
section of the ELF headers. This assumes that ELF is the binary format
used on ARM, which may not be the case on ARM noMMU systems (they use
the FLAT binary format), but Buildroot doesn't have support for such
systems at the moment.
Also ensure the correct CFLAGS are passed to the cross compiler for the
test, so the correct variant is used in case the toolchain is multilib.
[Peter: mention CFLAGS change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As noted by Yann E. Morin, the x$(...) = x"value" syntax is old and
ugly, and the easier to read "$(...)" = "value" can now be used
without problems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds three patches to uClibc that are needed to make
Thumb2 support work properly:
uclibc-0006-arm-clone-restore-stack-pointer-just-after-return-fr.patch
uclibc-0007-arm-clone.S-Add-missing-IT-instruction-for-Thumb2.patch
uclibc-0008-arm-move-check-for-BX-to-its-own-header.patch
The first one is a necessary dependency of the second one. Both of
those patches have already been merged upstream, after 0.9.33.2. The
third one hasn't been merged upstream yet, but it has already been
submitted a while ago by Yann E. Morin, without receiving attention
from upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation to the addition of more patches that require a correct
ordering, rename uClibc 0.9.33.2 patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
