- Drop second patch (already in version)
- Update hash of README (changes not related to license)
https://brltty.app/doc/ChangeLog.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gnuradio suffers from gcc bug 43744 but gqrx that depends on it doesn't
take into account the gcc bug. So let's add it as:
'depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_43744 # gnuradio'
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There seems to still be a similar parallel build issue, but with this
patch applied, it occurs much less frequently: from a 1/3rf failure
rate, I am now experiencing failures under the 1/10th mark.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
16.15.0:
- ASTERISK-29057: pjsip: Crash on call rejection during high load
16.15.1:
- AST-2020-003: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP message is received that has a
History-Info header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-003.pdf
- AST-2020-004: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP 181 response is received that has
a Diversion header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-004.pdf
16.16.0:
- ASTERISK-29219: res_pjsip_diversion: Crash if Tel URI contains History-Info
16.16.1:
- AST-2021-001: Remote crash in res_pjsip_diversion
If a registered user is tricked into dialing a malicious number that sends
lots of 181 responses to Asterisk, each one will cause a 181 to be sent
back to the original caller with an increasing number of entries in the
“Supported” header. Eventually the number of entries in the header
exceeds the size of the entry array and causes a crash.
https://downloads.asterisk.org/pub/security/AST-2021-001.pdf
- AST-2021-002: Remote crash possible when negotiating T.38
When re-negotiating for T.38 if the initial remote response was delayed
just enough Asterisk would send both audio and T.38 in the SDP. If this
happened, and the remote responded with a declined T.38 stream then
Asterisk would crash.
https://downloads.asterisk.org/pub/security/AST-2021-002.pdf
- AST-2021-003: Remote attacker could prematurely tear down SRTP calls
An unauthenticated remote attacker could replay SRTP packets which could
cause an Asterisk instance configured without strict RTP validation to
tear down calls prematurely.
https://downloads.asterisk.org/pub/security/AST-2021-003.pdf
- AST-2021-004: An unsuspecting user could crash Asterisk with multiple
hold/unhold requests
Due to a signedness comparison mismatch, an authenticated WebRTC client
could cause a stack overflow and Asterisk crash by sending multiple
hold/unhold requests in quick succession.
https://downloads.asterisk.org/pub/security/AST-2021-004.pdf
- AST-2021-005: Remote Crash Vulnerability in PJSIP channel driver
Given a scenario where an outgoing call is placed from Asterisk to a
remote SIP server it is possible for a crash to occur.
https://downloads.asterisk.org/pub/security/AST-2021-005.pdf
16.16.2:
- AST-2021-006: Crash when negotiating T.38 with a zero port
When Asterisk sends a re-invite initiating T.38 faxing and the endpoint
responds with a m=image line and zero port, a crash will occur in
Asterisk.
This is a reoccurrence of AST-2019-004.
https://downloads.asterisk.org/pub/security/AST-2021-006.pdf
16.17.0:
- ASTERISK-29203 / AST-2021-002 — Another scenario is causing a crash
- ASTERISK-29260: sRTP Replay Protection ignored; even tears down long calls
- ASTERISK-29227: res_pjsip_diversion: sending multiple 181 responses causes
memory corruption and crash
16.19.1:
- AST-2021-007: Remote Crash Vulnerability in PJSIP channel driver
When Asterisk receives a re-INVITE without SDP after having sent a BYE
request a crash will occur. This occurs due to the Asterisk channel no
longer being present while code assumes it is.
https://downloads.asterisk.org/pub/security/AST-2021-007.pdf
- AST-2021-008: Remote crash when using IAX2 channel driver
If the IAX2 channel driver receives a packet that contains an unsupported
media format it can cause a crash to occur in Asterisk.
https://downloads.asterisk.org/pub/security/AST-2021-008.pdf
- AST-2021-009: pjproject/pjsip: crash when SSL socket destroyed during
handshake
Depending on the timing, it’s possible for Asterisk to crash when using a
TLS connection if the underlying socket parent/listener gets destroyed
during the handshake.
https://downloads.asterisk.org/pub/security/AST-2021-009.pdf
16.20.0:
- ASTERISK-29415: Crash in PJSIP TLS transport
- ASTERISK-29381: chan_pjsip: Remote denial of service by an authenticated
user
In addition, a large number of bugfixes.
Drop now upstreamed
0006-AC_HEADER_STDC-causes-a-compile-failure-with-autoconf-2-70.patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2021-41159: Improper client input validation for gateway
connections allows to overwrite memory
- Fix CVE-2021-41160: Improper region checks in all clients allow out of
bound write to memory
https://github.com/FreeRDP/FreeRDP/releases/tag/2.4.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- bump version to 20211016
- add host-python3-cryptography dependency (needed since upstream
commit [1])
[1] 8033d52259
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- the last version bump of package/python-cffi (790c10d) ignored
the comment 'Please keep in sync with package/python3-cffi/python3-cffi.mk',
so catch up now
Fixes:
ERROR: No hash found for cffi-1.14.2.tar.gz
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch site to github to get latest release
https://github.com/festvox/flite/releases/tag/v2.2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update license hash due to updating Acorn to v8.4.1
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update seatd to version 0.6.3, which fixes a crash when used along
libinput 1.19.
Release notes:
https://git.sr.ht/~kennylevinsen/seatd/refs/0.6.3
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When creating the image we are using the target modules. Building
the modules for host is then unnecessary.
Lets configure host Grub2 for the 'none' platform.
Note that this still installs a platform-dependent file:
.../host/lib/grub/i386-pc/config.h
This file does not seem to have much purpose, but it is harmless.
We did not care to provide a post-isntall hook to remove it.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates the location of cdboot.img used, to select the one
from the target directory and not from the host.
The host-grub2 is built only to have access to the Grub tools binaries.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds the calls to MESSAGE, to explicit the different step of
the per-platform builds, following the current tuple loop. Besides a
nicer output to the user, this can also help debug what step actualy
failed.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch cleans the code by removing unnecessary \-continuations.
It replaces the semi-colons by either && or separate lines.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tools were not installed anymore since we move from autotools to
generic-package. This patch fixes their installation.
We have decided to implement the install tool process by running the "make
install" command for each tuple. This allows to have all different
platforms Grub modules installed in the target. The drawback is the
overwrite of Grub2 binaries tools during each "make install" command. This
drawback is absolutely not important as it happens in the same package. This is
the best option to avoid unnecessary and more complexity to this package.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 21d2a0c2ec:
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/firmware-utils-86739f2b3ae9502368b89ef37fa6f31c42aad6f4/src/mkhilinkfw.c:54:8: error: unknown type name 'DES_key_schedule'
54 | static DES_key_schedule schedule;
| ^~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/0563b24ccb7dd242998e1b59b217405c6340e276
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the rework of boot/config
file handling in commit 689b9ac439:
/usr/bin/install: cannot stat '/home/giuliobenetti/autobuild/run/instance-3/output-1/build/rpi-firmware-2ef3800b1b71c0e30c2a61ecad6e007ae96ea342/boot/startx.elf': No such file or directory
Fixes:
- http://autobuild.buildroot.org/results/88b2137ea81c4944cbded11fa68adcbca02e83d0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A simple test that runs nmap twice to create the files scanme-1.xml and
scanme2.xml, then runs pyndiff on both files.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The ndiff package provided by Nmap relies on python2; moreover, there
have been pending pull requests to move ndiff to python3 for over two
years with very little engagement by the maintainers
(https://github.com/nmap/nmap/pull/1807).
Remove the option to select ndiff altogether, it is replaced by
python-pyndiff, which provides the same functionality (and more) as the
ndiff provided by nmap, and is compatible with python3.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is a dependency for pyndiff
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Canfestival hasn't seen a patch since November of 2017, and it requires python2
to build. Remove the package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In addition:
- Remove upstream patch
- Update license hash to reflect license version bump from 0.92 to 0.93
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes a regression introduced in 0.59.0 which prevents gcr from compiling
UI support with the following error:
meson.build:225:5: ERROR: Tried to create target "@BASENAME@_merge",
but a target of that name already exists.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
