[Peter: drop patch and instead pass LD= on the make cmdline]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Correcting the indentation inside Config.in. Also adding the missed
license information.
Note: libmicrohttpd is partialy dual licensed, if you don't need or want
to use the HTTPS option you can choose between LPGLv2.1+ and the eCos
license (http://ecos.sourceware.org/license-overview.html).
If you use the HTTPS option you have to agree to the LGPLv2.1+!
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When udhcpc is used on multiple network devices at the same time (or a mix
of dhcp and fixed configuration), /etc/resolv.conf should contain the
union of information from all the interfaces.
Currently that's not the case. The udhcpc script simply overwrites
resolv.conf with the information from the specific interface on each dhcp
bound/renew event.
Fix it by tagging lines with the interface they came from when added,
and drop the affected lines on deconfig/renew. As /etc/resolv.conf is
often a symlink to /tmp (and rootfs might be read only), special care
has to be taken when it is updated.
Notice that I'm not really aware of any official documentation requiring
that '#' comments in /etc/resolv.conf must be supported, but atleast
glibc and uClibc do.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ifconfig up is a no-op if the device is already running, so let's just
do that unconditionally.
Systems might have multiple network devices, and perhaps run udhcpc on
another interface even when booted over nfs, so don't disable the
per-interface deconfig based on the global nfsroot= setting on the kernel
command line.
If you don't want udhcpc to mess with kernel level IP autoconfiguration
(E.G. for nfs boot), you should instead ensure udhcpc/ifup/ifplugd isn't
started for that interface.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We're currently using two different udhcpc scripts, one in the busybox
package and another in the avahi one, which calls avahi-autoipd on
dhcp failures.
The avahi one actually only does something differently from the default
if avahi-autoipd is available, so let's just always use this one instead
of the complicated logic about writing the file if not present /
overwriting it afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit bumps the various LTTng components to their latest stable
version: 0.7.7 for liburcu, 1.1.1 for babeltrace, 2.1.3 for libust and
2.1.2 for lttng-modules.
For babeltrace, the patch
lttng-babeltrace-02-fix-build-old-compilers.patch has been removed
because it has been merged upstream as of version 1.1.1. This is also
the reason why the package no longer needs to be autoreconfigured.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upon logging, dropbear whines if /root is group- or others-writable, and
key-based authentication is attempted, reverting to password-based
authentication:
dropbear[149]: /root must be owned by user or root, and not writable by others
dropbear[149]: Password auth succeeded for 'root' from 192.168.127.35:41566
On my system, /root was 770. Changing to 700 fixed the issue.
Having /root 700 is a good idea, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Original patch for tinyhttpd disables pthread support from the code
but does not disable it from makefile.
This patch disables pthread support altogether
Fixes:
http://autobuild.buildroot.net/results/2e61a80fcbddd62c76e0406c34ab44d14a4b5c79
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gvfs can make optional use of libgcrypt so it needs to depend on
it if it is selected. It's also necessary to set the
ac_cv_path_LIBGCRYPT_CONFIG variable to a known value in order
to prevent the AM_PATH_LIBGCRYPT macro from searching the host
paths for the libgcrypt-config script.
Fixes the following build problem when libgcrypt is installed on the
host system but the package is not selected in buildroot:
gvfsbackendafpbrowse.c:31:20: fatal error: gcrypt.h: No such file or directory
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If docbook2pdf is present on the host, the documentation is built, no
matter all the --disable-doc*
But forcing ac_cv_prog_DOCBOOK2PDF to no tells configure that
docbook2pdf is absent, and thus the documentation is not built.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gst-omx enables OpenMAX based accelerated video decode.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
adds libvpx support to gst1-plugins-good
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds the gstreamer version 1.x series to buildroot.
[Peter: strip trailing newlines in Config.in]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The argp bundled dependency which is linked to the libwvutils.so
shared library, wasn't built with -fPIC.
MIPS will refuce to link a non-PIC library with a shared one.
We fix this problem by appending -fPIC to CFLAGS and build all the
shared objects with -fPIC.
[Peter: use +=]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lxp.doc is a module that provides useful features for working with XML
formats in LOM format as used by the LuaExpat project from Kepler.
[Peter: use fixed git revision, github tarball, install -D]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libqmi is a glib-based library for talking to WWAN modems and devices which
speak the Qualcomm MSM Interface (QMI) protocol.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The blkid binary is not any longer installed when libblkid from
util-linux is selected. udev has a builtin blkid command though
and already detects all values that we are interested in. Change
the usbmount script to use the environment variables set by udev
instead of calling blkid directly.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since version 0.3.0, libconfig has been made optional
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already provide BR2_TARGET_GENERIC_HOSTNAME to set /etc/hostname,
so a default /etc/hostname file isn't needed.
More importantly, if the user has explictly set BR2_TARGET_GENERIC_HOSTNAME
to the empty string, we would still end up with a /etc/hostname containing
'buildroot' which is unlikely to be what the user wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A patch from Thomas Petazzoni has been upstreamed in sconeserver; bump version
and remove the patch from Buildroot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Dhcpcd is an RFC2131 compliant DHCP client.
[Peter: needs ipv6, fix whitespace/file header]
Signed-off-by: John Stile <john@stilen.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
