It's broken for the last 3 version bumps, since
1c9846ecc9 "linux-firmware: Bump to the latest version"
Fix it by updating the name of the file to install.
Do not use * since it would install also old versions that would take
1MB extra space in the target.
A comment to remember to update the file name when bumping the package
is not needed because a previous patch in the series makes the build
to fail for missing file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a file is listed to be installed but is missing from the package
source currently the first tar command exits with error code but it is
ignored and the build succeeds.
This issue by itself is minor because those listed files that are
present in the package source get installed to the target.
But the code is currently error prone, e.g. to a typo in the file list.
Fix this by first creating a tarball in the build directory and then
installing it, instead of using a pipe between the two tar invocations.
Also use && between the commands, so the first command that exits with
error code fails the build.
Since the two tar invocations remain in use, the desired behavior
remains the same:
- list of files can contain *;
- list of files can contain file inside path, and the path is then
replicated in the target;
- symlinks are not followed but are installed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build fails when the host binutils isn't at least 2.23
(2.22.x introduced RDSEED).
The host toolchain is used for x86_64 target builds where
we need to do a 32bit build. Most other buildroot builds
are using a much newer binutils unless it's a external
older toolchain.
Fixes:
http://autobuild.buildroot.net/results/c39/c3987a3cbd2960b0ff50f872636bdfd8d1a9c820/
Upstream:
https://marc.info/?l=kvm&m=151580743523259&w=2
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When bash is selected, /bin/bash is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connexions for users using bash as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Reported-by: Jeremy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Partially fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/47806089
And add myself to the list of devloppers for it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop patch 0004-uboot-tools-disable-pylibfdt.patch. The issue addressed by
this patch has been fixed in upstream commit
15b97f5c5e6d88e0560c6928f3acd01c999a494d.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the metaparse module as it is header only library now. No need for
legacy handling as the module is available unconditionally in Boost.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See: http://www.ti.com/tool/download/PRU-CGT-2-2
The ti-cgt-pru v2.1.x installer are affected by a bug with recent
distribution (Fedora 27 and Ubuntu 17.10) using kernel 4.13 or 4.14
with a glibc 2.26.
The installer is stuck in a futex(wait) system call.
While at it, add license hash.
Fixes:
http://autobuild.buildroot.net/results/68f/68f60ad38d9b6eae83b5d233966616a25d8c9391
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Ash Charles <ash.charles@savoirfairelinux.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like the previous commit did:
c9ecdd2b96 gpu-viv-bin-mx6q: fix compiling issues with EGL_API_FB
Difference is that in latest package, eglvivante.h is included after
a EGL_API_FB check in eglplatform.h, giving the following error:
/.../sysroot/usr/include/EGL/eglplatform.h:146:10:
fatal error: X11/Xlib.h: No such file or directory
#include <X11/Xlib.h>
Also, this patch introduce IMX_GPU_VIV_FIXUP_PKGCONFIG which fixes
the pkgconfig files (for some reason default egl.pc file isn't the
same as the one for fb target).
Finally, this patch removes references to libVIVANTE which is now
replaced by libVDK.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patch 0001-Fix-SHA256-hash-verification.patch.
Re-enable support for Lua 5.1 and LuaJIT, which was removed in version 2017.09
because of compatibility issues [1]. Meanwhile, the issues have been resolved
upstream [2].
Note, that `CONFIG_HANDLER_IN_LUA` is now supported by Lua 5.1/LuaJIT, too.
Add a fixup command `SWUPDATE_SET_LUA_VERSION` to set the correct base name for
the Lua/LuaJIT pkg-config file used by the swupdates config option `LUAPKG`.
Fix a small type in the help text:
'in my mind' -> 'in mind'.
Regenerated the .config script by doing:
```
make swupdate-menuconfig
make swupdate-update-config
```
.. and removing the paths for the build options manually.
[1] http://patchwork.ozlabs.org/patch/795958/
[2] 7b49b8dc59
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#10216
Building mcookie generates a warning about possible wrong arguments to
memset:
mcookie.c:207:26: warning: argument to ‘sizeof’ in ‘memset’ call is the same expression
as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess]
memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */
ctx is a pointer to a structure, so the code should use the size of the
structure and not the size of the pointer when it tries to clear the
structure, similar to how it got fixed upstream back in 2009:
https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/commit/lib/md5.c?id=6596057175c6ed342dc20e85eae8a42eb29b629f
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to commit 8ad38a4fc2
("package/lz4: bump version to r131"), the lz4 package was installing
both libraries and programs, but this commit changed the behavior to
only install libraries.
The contributor might have been confused by the fact that the build
command was "$(MAKE) ... -C $(@D) liblz4", suggesting that only the
library was built. But since the install command was "$(MAKE) ... -C
$(@D) install", the programs were effectively built as part of the
install step, and installed as well.
Since it makes sense for lz4 to also installs its programs, this
commit adjusts the package accordingly.
It is worth mentioning that using the "all" target during the build
step is important. Indeed, otherwise the programs/Makefile has a
"default" target that doesn't build everything (especially the lz4c
program) and it end up being built as part of the install step, due to
how the makefile dependencies are handled in the lz4 project. To make
sure that everything gets built during the build step, we explicitly
use the "all" target.
Fixes bug #9996
Reported-by: Jamin Collins <jamin.collins@gmail.com>
Initial-analysis-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As usual, https://github.com/kergoth/tslib/releases has the changelog
summary.
This release includes a new plugin "invert" that is being built by
default; so we add that to the list of statically compiled in plugins
for static builds.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current busybox.mk explicitly removes S01logging if CONFIG_SYSLOGD
is disabled in the Busybox configuration. However:
- This causes the removal of the S01logging script potentially
installed by another package (currently syslog-ng, rsyslog and
sysklogd can all install a S01logging script).
- We generally don't try to clean-up stuff that we may have installed
in a previous make invocation and that is no longer needed
following a configuration change.
Fixes bug #10176
Reported-by: Karl Krach <mail@kkrach.de>
Fix-provided-by: Karl Krach <mail@kkrach.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kmsxx build system can only build either shared libraries *or*
static libraries, not both. Therefore, the build currently fails when
BR2_SHARED_STATIC_LIBS=y because we try to install the static
libraries, that haven't been built.
We fix this by not installing the static libraries when
BR2_SHARED_STATIC_LIBS=y, making BR2_SHARED_STATIC_LIBS=y essentially
the same as BR2_SHARED_LIBS=y for this package.
Fixes bug #10331.
Reported-by: Frederic MATHIEU <frederic.mathieu@dualis.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The oss.sgi.com mailing list archives are no longer available, point
to spinics.net instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is an obvious typo in avahi_tmpfiles.conf: avahi-autoipd is
badly spelled.
Fixes bug #10641.
Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains mitigations for CVE-2017-5753 and CVE-2017-5715, the
vulnerabilities known as the "Spectre" attack. It also contains a fix
which allows building the reference documentation with newer gtk-doc
versions.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/01/10/webkitgtk2.18.5-released.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
<pkg>-<pkg-version>.tar.gz is the default value, so there's no need to
explicitly specify it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
<pkg>-<pkg-version>.tar.gz is the default value, so there's no need to
explicitly specify it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: change to automatically set the version in the generated .pc file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This feature is not used by anyone in the core developpers and makes a
drastic simplification of the pkg-download infrastructure harder.
The future patch will move much of what's in the current pkg-download.mk
file into the dl-wrapper which is a shell script.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch to avoid failing on a configure error if UI example can't be
built if libgtk3 is available but not gst1-plugins-base (gstreamer-video
is only needed for UI example, not for rygel UI)
Fixes:
- http://autobuild.buildroot.net/results/6c659aadfc418c0a27a93284eb34d75e2b0dc169
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
* AST-2017-014: Crash in PJSIP resource when missing a contact header A
select set of SIP messages create a dialog in Asterisk. Those SIP
messages must contain a contact header. For those messages, if the header
was not present and using the PJSIP channel driver, it would cause
Asterisk to crash. The severity of this vulnerability is somewhat
mitigated if authentication is enabled. If authentication is enabled a
user would have to first be authorized before reaching the crash point.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-13185-1475-1515-and-1318-cert2-now-available-security
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#10556
The --with-crypto handling in ntp only works with libopenssl, not with
libressl, where it ends up with compilation issues like:
ntp_control.c:(.text+0x64): undefined reference to `EVP_MD_CTX_new'
ntp_control.c:(.text+0x10c): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `bighash':
ntp_crypto.c:(.text+0x2e8): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x328): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `crypto_verify':
ntp_crypto.c:(.text+0x6cc): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x710): undefined reference to `EVP_MD_CTX_free'
ntp_crypto.c:(.text+0x72c): undefined reference to `EVP_MD_CTX_free'
So ensure we only pass --with-crypto when libopenssl is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are three 256 color terminfo files that buildroot only installs
if ncurses is configured with wide character support, which also
enables ext-color. There is a fourth 256 color terminfo file that does
not depend on wchar suport and is always installed.
This changes that to always install all four 256 color terminfo files.
When ncurses has ext-colors enabled,it allows 256 fg and bg colors at
the same time. Without ext-colors, it is still possible to use the 256
color terminfo files and one can get a combination of fb and bg colors
that equals up to 256, e.g. 256 fg colors on one background or 16 fg
and 16 bg colors.
In short, the 256 color files work fine without wchar or ext-color
support and support more colors than the normal xterm, etc. terminfo
files. It's common today for the default terminal to use
xterm-256color and it's nice if thinks like vim and top work out of
the box.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
14.6.1:
* AST-2017-005 (applied to all released versions): The "strictrtp" option in
rtp.conf enables a feature of the RTP stack that learns the source address
of media for a session and drops any packets that do not originate from
the expected address. This option is enabled by default in Asterisk 11
and above. The "nat" and "rtp_symmetric" options for chan_sip and
chan_pjsip respectively enable symmetric RTP support in the RTP stack.
This uses the source address of incoming media as the target address of
any sent media. This option is not enabled by default but is commonly
enabled to handle devices behind NAT.
A change was made to the strict RTP support in the RTP stack to better
tolerate late media when a reinvite occurs. When combined with the
symmetric RTP support this introduced an avenue where media could be
hijacked. Instead of only learning a new address when expected the new
code allowed a new source address to be learned at all times.
If a flood of RTP traffic was received the strict RTPsupport would allow
the new address to provide media and with symmetric RTP enabled outgoing
traffic would be sent to this new address, allowing the media to be
hijacked. Provided the attacker continued to send traffic they would
continue to receive traffic as well.
* AST-2017-006 (applied to all released versions): The app_minivm module has
an “externnotify” program configuration option that is executed by the
MinivmNotify dialplan application. The application uses the caller-id
name and number as part of a built string passed to the OS shell for
interpretation and execution. Since the caller-id name and number can
come from an untrusted source, a crafted caller-id name or number allows
an arbitrary shell command injection.
* AST-2017-007 (applied only to 13.17.1 and 14.6.1): A carefully crafted URI
in a From, To or Contact header could cause Asterisk to crash
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11252-13171-1461-116-cert17-1313-cert5-now-available-security
14.6.2:
* AST-2017-008: Insufficient RTCP packet validation could allow reading
stale buffer contents and when combined with the “nat” and “symmetric_rtp”
options allow redirecting where Asterisk sends the next RTCP report.
The RTP stream qualification to learn the source address of media always
accepted the first RTP packet as the new source and allowed what
AST-2017-005 was mitigating. The intent was to qualify a series of
packets before accepting the new source address.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11253-13172-1462-116-cert18-1313-cert6-now-available-security
Drop 0004-configure-in-cross-complation-assimne-eventfd-are-av.patch as this
is now handled differently upstream (by disabling eventfd for cross
compilation, see commit 2e927990b3d2 (eventfd: Disable during cross
compilation)). If eventfd support is needed then this should be submitted
upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the advisory (https://irssi.org/security/irssi_sa_2018_01.txt):
Multiple vulnerabilities have been located in Irssi.
(a) When the channel topic is set without specifying a sender, Irssi
may dereference NULL pointer. Found by Joseph Bisch. (CWE-476)
CVE-2018-5206 was assigned to this issue.
(b) When using incomplete escape codes, Irssi may access data beyond
the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5205 was assigned to this issue.
(c) A calculation error in the completion code could cause a heap
buffer overflow when completing certain strings. (CWE-126) Found
by Joseph Bisch.
CVE-2018-5208 was assigned to this issue.
(d) When using an incomplete variable argument, Irssi may access data
beyond the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5207 was assigned to this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As BUILD_STATIC_LIBS is not a standard cmake variable (while
BUILD_SHARED_LIBS is) we shouldn't add it in pkg-cmake.mk, although
for some packages that would make sense. Therefore, add a note so we
don't forget about this abnormality.
See: https://cmake.org/cmake/help/v3.8/manual/cmake-variables.7.html#variables-that-change-behavior
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
[Thomas: rework the comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BUILD_SHARED_LIBS option is already handled by the cmake-package
infrastructure, so there is no need to pass it at the package level.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit fa6c7d1659 ("libdrm: fix
libatomic_ops linking"), a patch was added to switch to
PKG_CHECK_MODULES() to detect libatomic_ops instead of
AC_CHECK_HEADER.
However, as explained in
https://autotools.io/pkgconfig/pkg_check_modules.html:
"In contrast with almost all of the original macros, though, the default
action-if-not-found will end the execution with an error for not having
found the dependency."
This makes the configure script bail out when libatomic_ops is not
available, which is not what we want in libdrm's configure
script. This commit adjusts the PKG_CHECK_MODULES() call to avoid
failing.
Fixes:
http://autobuild.buildroot.net/results/cea/cea777dc997f86c1122c8b818d264215a0e77e5a/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch contains the following changes:
- Remove all three patches, they are included in upstream version
- Add locally calculated sha256 hash
- Remove <pkg>_STRIP_COMPONENTS = 2, there is no leading directory
- Remove <pkg>_AUTORECONF and <pkg>_GETTEXTIZE since all the patches are
being removed.
Signed-off-by: Yair Ben Avraham <yairba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autotools-based packages that do not need C++ but check for it, and use
libtool, will fail to configure on distros that lack /lib/cpp.
This is the case for example on Arch Linux, where expat fails to build
with:
configure: error: in `/home/dkc/src/buildroot/build/build/expat-2.2.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This is because libtool uses AC_PROC_CXXCPP, which can not be avoided,
and does require a cpp that passes some "sanity" checks (does not choke
on valid input, but does choke on invalid input). So we can use neither
/bin/false nor /bin/true...
We instead need something that can digest some basic C++ preprocessor
input. We can't use the target preprocessor: that does not work, because
it obviously has no C++ cupport:
arm-linux-cpp.br_real: error: conftest.cpp: C++ compiler not
installed on this system
We can however consider that the host machine does have a C++ compiler,
so we use the host' cpp, which is gcc's compiler wrapper that ends up
calling the host's C++ preprocessor.
That would give us a valid C++ preprocessor when we don't have one, in
fact. But autotools will then correctly fail anyway, because there is
indeed no C++ compiler at all, as we can see in this excerpt of a
configure log from expat:
checking whether we are using the GNU C++ compiler... no
checking whether false accepts -g... no
checking dependency style of false... none
checking how to run the C++ preprocessor... cpp
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
libtool.m4: error: problem compiling CXX test program
checking for false option to produce PIC... -DPIC
checking if false PIC flag -DPIC works... no
checking if false static flag works... no
checking if false supports -c -o file.o... no
checking if false supports -c -o file.o... (cached) no
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
So, using the host's C++ preprocessor (by way of gcc's wrapper) leads to
a working situation, where the end result is as expected.
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libdnet is an optional dependency, it is only needed if nfq or ipq
module are enabled.
So, if libdnet and libnetfilter_queue are available, enable nfq module
and add a dependency to both packages otherwise disable nfq module.
Moreover, always disable ipq module as libipq is deprecated, it isn't
enable in iptables. Even if it was enabled, libipq.h can't be included
as it makes a reference to linux/netfilter_ipv4/ip_queue.h which is not
available anymore
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Integrate bug fixes
This patch is based on the following Yocto commit:
https://github.com/Freescale/meta-freescale/commit/b33b15e1
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
1. Upgrade EULA to v18
2. Bugfixes/Optimization
- Update HEVC PARSER 01.00.02/ APE PARSER 00.00.08/ MPEG2 PARSER 04.05.10
1. Delete the useless label in HEVC PARSER.
2. Fix 2 variables' not init in special case for APE PARSER.
3. Fix one struct's not init for MPEG2 PARSER.
- Fix one mp3 can't play on jb4.3_1.1.1-ga
ID3V2 contains a picture larger than 3MB, need to save ID3 data size
in self->m_dwID3V2Size to let parser skip it when starting playback.
- Fix creating parser error
When variable value is negative, if(bytesToRead) will return true,
modify this condition to if(bytesToRead > 0).
Note that this package now includes AARCH64 libraries for the upcoming
i.MX8 CPU family.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
1. Upgrade EULA to v18
2. Bugfix/Optimization
- AACPlus: fixed playbe silence after 1s of stream
- Removed duplicated code in aac_dec/aacplus_dec.
- Removed unused code in flac_dec.
Note that this package now includes AARCH64 libraries for the upcoming
i.MX8 CPU family.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New features:
- Added mutex protection for referencing gctSIGNAL in gckOS_MapSignal to
fix a MT race issue.
- Streamlined GPU address calculation base on MC20 (0/1) and MMU (0/1)
combinations.
- Fixed multiple Android HWC 2.0 rendering issues. Refined HWC 2.0 driver
implementation.
- Improved HWC2.0 composition performance by composing damaged regions
only.
- Enabled offline/online compiler IR assembly dump function for users.
- Implemented the direct rendering support (no-resolve) for Wayland
platform.
- Added EGL_EXT_buffer_age extension for Wayland and fbdev platforms.
- Updated wayland-viv protocol to support tile status sync from client
to server.
- Improved OpenCL 1.2 builtin function support with native GPU
instructions.
- Enabled OpenCL 1.2 API trace dump function controlled by VIV_TRACE
environment variable.
- Support for OpenGL4.0
- Cleaned up driver code issues reported by Klocwork and Coverity.
Full changelog:
http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/GraphicsChangeLogv6?h=imx-morty
Note that the apitrace tool and the G2D libraries are not part of the
package any longer, so the corresponding options are removed. The G2D
libraries are now provided by a separate package.
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
# gmem_info
... display memory use per PID ...
Also update packages that depended on g2d libraries to match new package
name.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up until now, the G2D libraries were included inside the imx-gpu-viv
package. However, since next version of the i.MX will use a new
hardware IP to do 2D rendering (DPU), the GPU 2D libraries have been
separated from the 3D GPU package.
Tested with the following commands:
# /usr/share/examples/g2d_samples/g2d_multiblit_test
# /usr/share/examples/g2d_samples/g2d_overlay_test
# /usr/share/examples/g2d_samples/g2d_test
# gst-launch-1.0 videotestsrc ! imxg2dvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to match the latest imx-lib PLATFORM variable requirements [1].
Also creating BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU so that it is easier
to hide/show the Vivante-related packages.
[1] https://github.com/Freescale/meta-freescale/blob/master/recipes-bsp/imx-lib/imx-lib_git.bb
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
numactl works on aarch64 so enable it for that architecture.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nilfs-utils use clock_nanosleep(), which comes with NPTL threads. We
keep the dependency on threads, because sem_open() is really related
to thread support. The dependency on NPTL for clock_nanosleep() might
be lifted in the future, as it seems to be a bug in uClibc-ng.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
[Thomas: update Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
daq can be compiled without libpcap thanks to --enable-pcap-module and
--disable-pcap-module options.
libpcap is just a mandadory dependency of snort.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream switched to cmake.
Add upstream patch that removes run of target binary on the host.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Out-of-tree driver has been updated according to mac80211
and timer API changes in the upcoming Linux v4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Out-of-tree driver has been updated according to timer API changes
in the upcoming Linux v4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#10631
The gstreamer plugins were recently bumped to 1.12.4, but the main
gstreamer1 package not. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zlib-ng, a fast Zlib replacement
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: drop host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The existing zlib package is renamed to libzlib, and zlib is turned
into a virtual package. This is done in preparation to the
introduction of zlib-ng as an alternative implementation.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_ZLIB as suggested by Yann
E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This was missing in commit aca8412ce2
("cjson: build shared and static library").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cjson 1.6.0 added the BUILD_SHARED_AND_STATIC_LIBS option which is OFF
by default so set it depending on BR2_SHARED_STATIC_LIBS value.
If BUILD_SHARED_AND_STATIC_LIBS is set to OFF, cjson uses the standard
BUILD_SHARED_LIBS option which is passed by the cmake-package
infrastructure.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps sysdig to version 0.19.1 and removes
an upstreamed patch.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Thomas: rename to tcf-agent, add missing dependency on BR2_USE_MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To support transparent (de)compression in iso9660, we need mkzftree,
which comes from zisofs_tools, biundled with cdrkit.
However, cdrkit is a cmake package, but zisofs_tools is an autotools
package, so we need a separate package just to get mkzftree, but it is
pretty lightweight.
We just need the host variant for now,so we just add that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add entry to DEVELOPERS file, rename to zisofs-tools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch 0003-configure-Makefile.am-use-pkg-config-to-discover-lib.patch
provided by Thomas Petazzoni handling libatomic_ops linking when needed.
Fixes [1]:
CCLD etnaviv_cmd_stream_test
../../etnaviv/.libs/libdrm_etnaviv.so: undefined reference to `AO_store_full_emulation'
../../etnaviv/.libs/libdrm_etnaviv.so: undefined reference to `AO_fetch_compare_and_swap_emulation'
collect2: error: ld returned 1 exit status
[1] http://autobuild.buildroot.net/results/92e074c49417261843eef95872ff935a56077c98
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i2c-tools package has adopted the code of eeprog.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patch, as it has been added upstream.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, meson will set the c_link_args and the cpp_link_args to the
value of TARGET_LDFLAGS, even when it's not defined.
This creates a malformed array ["",] which will break any package
building using meson/ninja.
We fix that by using an empty replacement when the corresponding values
are empty.
Reported-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[yann.morin.1998@free.fr: alternate implementation, suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Adam Duskett aduskett@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The isag tool has been removed in version 11.5.5; no need to avoid its
installation anymore.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FFMPEG_DEPENDENCIES shouldn't be used in mpv.mk. This typo was
introduced in commit 8e741412d4 ("mpv:
add support for Raspberry Pi "rpi" output").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BusyBox installs kill, link, mktemp, nice and printenv on /bin, so
ensure that coreutils replaces them.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mpv now compiles with the "rpi" video driver that provides hardware
acceleration on the Raspberry Pi.
Tested working on a Raspberry Pi 1 Model B+ and Zero.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
[Thomas: drop unneeded dependency on rpi-firmware.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rpi-userland provides the user-space blobs needed for OpenGL and al.,
rpi-firmware is not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The old Atom target is not really fitting for recent Atom CPUs based
on Silvermont, Airmont or Goldmont. Those have more in common with
older Desktop CPUs than old Atoms.
Signed-off-by: Norbert Lange <norbert.lange@andritz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- propagate dependencies of selected packages in Config.in
- add missing Config.in comment about dependencies
- add missing upstream URL in Config.in
- add missing comment header in .mk file
- remove --disable-nls from configuration options, it is taken care
of by the package infrastructure
- remove --disable-dependency-tracking, it is taken care of in the
package infrastructure
- add $(TARGET_NLS_DEPENDENCIES) to <pkg>_DEPENDENCIES, since gconf
has optional NLS support
- add host-intltool to <pkg>_DEPENDENCIES, since gconf needs
intltool-update
- fix license: it's LGPL-2.0+, not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pkg-config wrapper script is currently generated with absolute
paths to $(STAGING_DIR). However, this will not work properly with
per-package SDK, and each package will be built with a different
STAGING_DIR value.
In order to fix this, we adjust how the pkg-config wrapper script is
generated, so that it uses a relative path to itself: the sysroot (i.e
STAGING_DIR) is always located in $(path of
pkg-config)/../$(STAGING_SUBDIR).
This change is independent from the per-package SDK work, and could be
applied independently from it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nilfs-utils provides the user-space utilities for the nilfs2
filesystem.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes in this version:
- Small improvement and bug fixes.
- Install rfkill at /usr/sbin (thus overriding the one eventually
installed by BusyBox).
Drop the md5 patch, already applyed upstream.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building with dynamic library support, i2c-tools utilities are
linked against the libi2c.so library. Current i2c-tools install commands
don't take this into account, which leads to the following run-time
error:
eeprog: error while loading shared libraries: libi2c.so.0: cannot open shared object file: No such file or directory
Use the native install target to fix that.
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This debian fork of netcat includes the kernel UAPI inet6 header. This
header conflicts with the existing libc inet header and causes
redefinition of structures when they are both included.
The compiler raises the following error:
/home/buildroot/build/instance-0/output/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/linux/in6.h:30:8: error: redefinition of 'struct in6_addr' struct in6_addr {
>From version 3.12 of linux, the kernel UAPI header has mechanisms in
libc-compat.h to prevent such situations (see __UAPI_DEF_SOCKADDR_IN6
macros).
Unfortunately the build is broken when toolchains do not satisfy at least
the linux headers condition (>= 3.12).
The package now depends on the toolchain headers at least 3.12.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
[Thomas: update Config.in comment about the 3.12 headers dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current link leads to a 400 Bad Request error page.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If we don't explicitly disable SELinux support in the host-tar build,
it might pick up system-wide installed SELinux libraries, causing the
tar in HOST_DIR/bin/ to depend on the host SELinux libraries, which is
not desirable to make the SDK portable/relocatable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A json library that aims to make json feel like a first class data
type using C++11, json for modern c++ is a easy to use, flexible,
modern json library.
Design goals include:
- Intuitive syntax. In languages such as Python, JSON feels like a
first class data type. All the operator magic of modern C++ is used
to achieve the same feeling in c++.
- Trivial integration. The whole code consists of a single header file
json.hpp. That's it. No library, no subproject, no dependencies, no
complex build system. The class is written in vanilla C++11. All in
all, everything should require no adjustment of compiler flags or
project settings.
- Serious testing. The class is heavily unit-tested and covers 100% of
the code, including all exceptional behavior. Furthermore, it is
checked with Valgrind that there are no memory leaks. To maintain
high quality, the project is following the Core Infrastructure
Initiative (CII) best practices.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas:
- use "json-for-modern-cpp" everywhere as the name of the package
- add <pkg>_INSTALL_TARGET = NO since it's a header only library]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The wolfSSL embedded SSL library is a lightweight and portable
SSL/TLS library.
Tested on Beaglebone Black using a tool called testsuite that
comes with wolfssl source code inside the testsuite/ directory.
To build it, we have to pass --enable-examples in the configure,
and then manually copy the binary to the rootfs. Also, to use
this tool, you will we need to copy the certs/* directory to the
rootfs.
Build-tested with test-pkg script.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
First, the .pc file was so far fixed as a post-configure hook of the
matchbox-fakekey package, by directly tweaking the .pc file installed in
staging by matchbox-lib. That's uterly wrong and bad.
So, we move the fix to matchbox-lib.
Second, it was incorreclty tweaking the .pc file when xlib_libXft was
not enabled, because only then a path to staging was present.
Third, even when xlib_libXft was enabled, the tweaking was still wrong,
because unnecessary.
Fix all that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox-lib build-depends on xlib_libXext, but forgets to select it.
It also build-depends on expat without selecting it, but it does need
it.
Fix that: select xlib_libXext, remove expat.
Add myself to developpers for matchbox packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avahi needs avahi-daemon and D-Bus to build avahi-client.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When in python3, shutilwhich will simply use shutil.which.
Some packages (e.g. crossbar.io) unconditionally require shutilwhich,
even when they are running under python3.
So, enable python-shutilwhich even for python3.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Mauro Condarelli <mc5686@mclink.it>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This requirement is likely to go away in the future. However, declaring
this fact explicitly for now fixes a number of test-pkg failures.
Signed-off-by: Mario Lang <mlang@blind.guru>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following error:
./configure: line 14978: .../host/bin/pkg-config: No such file or directory
Signed-off-by: Mario Lang <mlang@blind.guru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The regular expression that drops the -I flag from the output of
pkg-config --cflags-only-I doesn't work properly as it is too naive:
it breaks a path if it contains -I:
$ echo "-I/usr/Some-Install-Location/include" | sed 's/-I//g'
/usr/Somenstall-Location/include
$ echo "-I/usr/Some-Install-Location/include" | sed -re 's/(^|\s)-I\s*(\S+)/\1\2/g'
/usr/Some-Install-Location/include
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a hash for the license file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add configuration options for hostapd to select which kind
of VLAN support to build.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When compiling libtirpc, without RPC support available on the host
machine, the build of the rpcgen host program because it cannot find
the netconfig.h and rpc/types.h headers. Instead of relying on the
system-provided ones, let's use the ones included in the libtirpc
source code by patching the rpcgen build logic.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas: reword commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch cherry-picked from upstream, can be removed upon next release.
Signed-off-by: Mario Lang <mlang@blind.guru>
[Thomas: move patch out of per-version directory.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps i2c-tools to version 4.0 and adds a couple of
new commands named i2ctransfer and eeprog.
It adds also several upstream commits not included in the release
that fix static compilation issues and parallel build issues.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The non-SMP scheduler was deprecated with the Erlang/OTP 20.0 release and
slated for removal with the next major Erlang release. Since the non-SMP
scheduler isn't even built anymore, this option no longer has the
intended effect of saving space or compile time. The SMP scheduler
supports both SMP and non-SMP processors, so removing the option will
not break any platforms.
We do not need to add a legacy entry, because the new behavior is the
same as with the option previously set (i.e. SMP enabled).
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides the host variant of the Meson Build System, an
open source build system meant to be both extremely fast, and as user
friendly as possible.
More precisely, Meson creates configuration files for the Ninja build
system.
Besides building Meson, it generates a configuration file
("$(HOST_DIR)/etc/meson/cross-compilation.conf") to be used when
cross-compiling a Meson-based project.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the following compilation error:
src/libostree/ostree-repo-pull.c:1493:1: error: no previous prototype
for '_ostree_repo_verify_bindings' [-Werror=missing-prototypes]
The patch is submitted upstreams (8d3d14503b3105f93db635022e881e02688f2db4)
and should be removed in the next version bump.
Fixes:
http://autobuild.buildroot.net/results/3fc91565cb2d0fabe566c109257a616bd57cb08c
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avahi support also needs libavahi-client, which is built by avahi if avahi-daemon
and dbus is selected.
Fixes:
http://autobuild.buildroot.net/results/1edfb60add17945eabc557e1dbfb08a0ba466df9/
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: drop dependency on dbus, since libostree only needs avahi.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other changes:
- Add a hash for the license file.
- Change the URL from pqxx.org to the official GitHub repository, as releases
are no longer being posted to the old download mirror.
- Remove the patch, this has been fixed in the upstream code for some time.
- Remove AUTORECONF, as it is no longer necessary because the patch has been
removed.
- Require gcc >= 4.7, as C++11 is now mandatory:
http://pqxx.org/development/libpqxx/
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use upstream provided tarball; drop autoreconf.
Drop -Werror removal patch; json-c builds fine with gcc 7 without this
patch.
Drop upstream libm patch.
Drop --disable-oldname-compat; removed upstream.
Add license file hash.
Enable parallel build. The commit introducing MAKE1, ecd0f65af9
(json-c: bump to version 0.11) does not explain the reason for that. A
sequence of a few builds on a multi-core system never faild.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is needed for the recent cryptsetup version host build.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump mfgtools to include the fix [1] for the C++ build issue reported
by the autobuilders.
This bump include only 4 small commits fixing memory leak and this
build issue.
Remove CPOL.htm (removed upstream) from MFGTOOLS_LICENSE_FILES but CPOL
license is still valid.
Add the README.txt file to MFGTOOLS_LICENSE_FILES since it contains
licensing informations:
Licenses:
- CPOL: MfgToolLib/XmlLite.CPP and XmlLite.h
- BSD: Others.
Add license file hash.
[1] b370a43e54
Fixes:
http://autobuild.buildroot.net/results/7c2bbbe13ab315684f3502afd96958a76879b1d5
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use https URL to avoid redirect.
Drop non-LFS compatibility patch; we do not support non-LFS build
anymore.
Add license files hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch; issue fixed upstream.
Add license file hash.
Revert back to .tar.gz since that is what upstream provides.
Remove autoreconf; tarball has configure script.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cryptsetup is available under musl since commit f71507d41b (lvm2:
make basic package available under musl). Enable luksmeta as well.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the now mandatory json-c depencecy. Propagate to reverse
dependencies.
Drop the no longer needed patch.
Add license files hashes.
[Peter: propagate _HAS_SYNC_4 dependency to comments as pointed out by
Thomas]
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The old SGI site is not accessible anymore. Use the link from the README
file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add licenses and hashes for these licenses.
Enabled build with musl; the non standard types have been removed
upstream. Fixes bug #10581.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains fixes for CVE-2017-13866, CVE-2017-13870, CVE-2017-7156, and
CVE-2017-13856. Additionally, this release brings improvements in the
WebDriver spec-compliance, plugs several memory leaks in its GStreamer based
multimedia backend, and fixes a bug when handling cookie removal.
Release notes can be found in the announcement:
https://webkitgtk.org/2017/12/19/webkitgtk2.18.4-released.html
More details about the security fixes are provided in the following
WebKitGTK+ Security Advisory report:
https://webkitgtk.org/security/WSA-2017-0010.html
Last but not least, this new release includes the fix for honoring the
CMAKE_BUILD_TYPE value from CMake toolchain files and the corresponding
patch is removed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The (deprecated) libsamplerate support is not enabled unless
--enable-samplerate is passed to configure. Fix this.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Put together alsa-lib dependency and configure option code. As a side
effect we now avoid alsa-lib dependency when the required support in
alsa is missing.
Use positive logic.
Explicitly enable alsa support when available.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-13672: QEMU (aka Quick Emulator), when built with the VGA display
emulator support, allows local guest OS privileged users to cause a denial
of service (out-of-bounds read and QEMU process crash) via vectors involving
display update.
CVE-2017-15118: Stack buffer overflow in NBD server triggered via long
export name
CVE-2017-15119: DoS via large option request
CVE-2017-15268: Qemu through 2.10.0 allows remote attackers to cause a
memory leak by triggering slow data-channel read operations, related to
io/channel-websock.c.
For more details, see the release announcement:
https://lists.nongnu.org/archive/html/qemu-devel/2017-12/msg03618.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This would make the unicode challenged menuconfig show something
sensible.
Split the sentence for the text to make sense.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The receive_xattr function in xattrs.c in rsync 3.1.2 and 3.1.3-development
does not check for a trailing '\0' character in an xattr name, which allows
remote attackers to cause a denial of service (heap-based buffer over-read
and application crash) or possibly have unspecified other impact by sending
crafted data to the daemon.
For more details, see:
https://bugzilla.samba.org/show_bug.cgi?id=13112
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add drivers for Atheros 10k (QCA998X) chipset.
Both firmware versions are imported, and unused should be pruned as
required.
[Peter: use upper case 'K' in symbol name]
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ConsoleKit module is loaded by default from the default.pa
configuration file, but its initialization fails because Buildroot has
no ConsoleKit package yet. This breaks per-user pulseaudio daemon.
The default.pa configuration load module-console-kit only when it
exists. Remove module-console-kit to fix pulseaudio per-user startup.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lldpd currently depends on a C++ compiler to configure properly, but
the package doesn't select that option, so builds fail if
BR2_TOOLCHAIN_BUILDROOT_CXX is not selected with following errors:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in `/home/dkc/src/buildroot/build-zii/build/lldpd-0.9.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This package actually builds fine without C++, so drop this check in
configure.ac. Attached patch has already been accepted upstream [1].
[1] https://github.com/vincentbernat/lldpd/pull/261
[Peter: adjust autoreconf comment]
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Reviewed-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit cb7aa25df8 has disabled upnp support
as --disable-upnp and --enable-upnp are both set if libupnp or libupnp18
is enabled
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
See https://nodejs.org/en/blog/release/v8.9.3/
[Peter: mention that this fixes security issues]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MIPS N64 ABI has been missing getdents64 wire up until kernel version
3.10. Disable use of getdents on older kernels.
Fixes:
http://autobuild.buildroot.net/results/961/9619062ce6642ae4121d7debb3b4c632c88723d5/
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Philipp Claves <claves@budelmann-elektronik.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix licence information and add licence checksum.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pycparser is mentioned in setup.py as install_requires, so
select it in Config.in.
As python-cffi will be installed with python-crossbar's dependencies,
remove it from python-crossbar's Config.in.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iproute2 renamed the configure script output file to config.mk. Update
the config tweaking code accordingly.
The configure script now detects xtables correctly, drop this part.
Add a comment to explain the TC_CONFIG_XT disable tweak.
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the ordering of the Config.in option properties, as
reported by check-package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the warnings reported by check-package on the help
text of all package Config.in files, related to the formatting of the
help text: should start with a tab, then 2 spaces, then at most 62
characters.
The vast majority of warnings fixed were caused by too long lines. A
few warnings were related to spaces being used instead of a tab to
indent the help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mario Lang <mlang@blind.guru>
[Thomas:
- wrap too long CONF_OPTS line that disables all the language
bindings
- use an intermediate BRLTTY_TEXT_TABLE variable to store the
qstripped version of BR2_PACKAGE_BRLTTY_TEXT_TABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new version needs proj as a dependency, and provides an
autotools-based build system.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- switch to the autotools build system, which supports static linking
properly
- add <pkg>_LICENSE_FILES
- add sha256 hash for the tarball, in addition to the md5 one
- add license file hash
- squash DEVELOPERS file addition]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gdb install target installs dynamic versions of libbfd and
libopcode, accidentally overwriting the binutils provided versions
(gdb itself links against the bundled static ones to avoid
version problems, so the dynamic ones are un-needed).
Prevent the installation by using the '--disable-install-libbfd'
configure option.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Peter, using cp during the installation isn't correct,
as it follows symbolic links, potentially over-writing the busybox
binary through its traceroute symbolic link. To avoid that, we pass
INSTALL=$(INSTALL) during the installation step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
