xtensa patch is upstream so there's no need for it any longer.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages, sudo for instance, install .a and .la files in
$(TARGET_DIR)/usr/libexec. These files are not needed on target.
This patch refactors the existing "find" invocations in
target-finalize into a single one removing all .a and .la files from
lib, usr/lib and usr/libexec.
[Thomas: rework to use a single "find" invocation, and adjusted the
commit log accordingly.]
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Backport patch from upstream to fix musl build error:
```
In file included from ext/posix/posix.c:25:0:
ext/posix/sched.c: In function 'Psched_setscheduler':
ext/posix/sched.c:74:9: error: variable 'sched_param' has initializer but incomplete type
struct sched_param sched_param = {0};
```
Fixed upstream by commit 11cc8a2973569ec7fb1e7c2466dca0282944b124.
[Thomas: add missing <pkg>_AUTORECONF=YES.]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also remove patch 0001-fix-build-flags.patch. The uCLibc issue is fixed
upstream.
Add patch taken and slighly adopted from the c-periphery package to fix build
issue with musl.
Build was tested with an uCLibc toolchain and a musl toolchain.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These architectures don't have explicit exception handling support in
micropython but can use the setjmp fallback behaviour instead.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes are based on Zedboard: Xilinx does not provide a specific DTS
for Microzed in the kernel tree. It is suggested [1] to use the
zynq-zed.dts and change the RAM size
[1] https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856
[Thomas:
- extend readme.txt to indicate why the same DTB is used for Microzed
and the Zedboard.
- add a description + Signed-off-by line in the
0001-zynq-Create-microzed-specific-U-Boot-environment.patch, by
re-using the description of the same patch for the Zedboard.]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Micro Python is a lean and fast implementation of the Python 3
programming language that is optimised to run on a microcontroller.
[Thomas: fix minor typo in Config.in noticed by Vicente.]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David du Colombier <0intro@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David du Colombier <0intro@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GUPnP A/V reference manual https://developer.gnome.org/gupnp-av/
says latest available stable version is 0.11.2 but there are
couple of bug fixes releases after that in same series. It looks
like manual is not up-to-date. Use latest version 0.11.6
of series 0.11 instead.
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A number of embedded systems only include the root user, so this patch
changes the VLC package so that running VLC as root is allowed, like
it is for all other Buildroot packages.
[Thomas: tweak commit log, remove incorrect Tested-by.]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a patch that is originally based on a patch Thomas P.
submitted for an earlier version of this package. I have adopted this
patch to use the latest available Gentoo parallel patch. I have also
seen about a minute improvement on my build times of openssl.
Part of Thomas P's original message:
On my build server, the current build of OpenSSL takes 1 minutes and
20 seconds. With this commit applied, enabling parallel build and
installation, the build only takes 28 seconds.
All the patches are downloaded from Gentoo.
There is apparently some interest in upstream OpenSSL to enable
parallel build, see for example commit
c3f22253b1. This
commit is not part of any OpenSSL release, but we can hope that the
problem will resolved in the future.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Gustavo Zacarias <gustavo@zacarias.com.ar>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using Git formatted patches makes it easier to adjust the patches when
needed.
[Thomas: remove patch numbering.]
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Gustavo Zacarias <gustavo@zacarias.com.ar>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Makefile of libselinux performs the following check:
ARCH := $(patsubst i%86,i386,$(shell uname -m))
ifneq (,$(filter i386,$(ARCH)))
TLSFLAGS += -mno-tls-direct-seg-refs
endif
Which means that if the host machine is an x86, then TLSFLAGS will
contain -mno-tls-direct-seg-refs. That command line option causes
libselinux to fail when building it for target architectures where the
compiler doesn't support that option, i.e. MIPS:
mips-img-linux-gnu-gcc: error: unrecognized command line option
‘-mno-tls-direct-seg-refs’
So to fix that problem we can set the ARCH variable to $(KERNEL_ARCH),
and then append it to the LIBSELINUX_MAKE_OPTS.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that liburcu builds for aarch64, lttng-tools has all its dependencies met
for aarch64, so allow it to build for this architecture.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With aarch64 support added to liburcu, lttng-libust has its dependencies met
for aarch64, so allow it to build for this architecture.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bring over a patch from OpenEmbedded to treat aarch64 like arm in the build
process, which allows the build to succeed.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that mailman handles lists.buildroot.org lets use that everywhere in the
documentation as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When linking statically, the order of libraries on the
linker command matters, since readline depends on ncurses.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also update legacy as well.
And remove the BR2_DEPRECATED_SINCE_2014_08 symbol since it's unused
now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove for the upcoming 2015.11 release, they've been deprecated for a
year now.
Also remove some previously forgotten selection removals in legacy.
[Peter: drop 3.0.x kernel patch]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
