[Peter: AUTORECONF and --with-keysymdef no longer needed]
Signed-off-by: Allan W. Nielsen <a@awn.dk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of alsa-lib correctly use threads only when available, but
some other parts, especially certain PCM plugins, unconditionally
require threads. While it would certainly be possible to fix alsa-lib
to only use threads when available, it probably doesn't make much
sense, since on an embedded system that has audio, we are probably
powerful enough to enable thread support in the C library.
Fixes:
http://autobuild.buildroot.org/results/e14469be7f6171f4c8c0c09c8e32943819f7938b/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of duplicating the "depends on BR2_PACKAGE_ALSA_LIB", just put
BR2_PACKAGE_ALSA_LIB_PYTHON under the existing condition "if
BR2_PACKAGE_ALSA_LIB".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In its Config.in, pulseaudio declares a dependency on gettext
using the documented construct:
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
but in its .mk file, declares a dependency on the package:
PULSEAUDIO_DEPENDENCIES = [...] $(if $(BR2_PACKAGE_GETTEXT),gettext) [...]
instead of the documented:
$(if $(BR2_NEEDS_GETTEXT),gettext)
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lshw.mk defines a build-dependency on gettext,
but not in its Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: add license info, build libintl if locales disabled]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now, the gettext package always:
* install everything to the staging directory
* install the libraries to the target directory
Note that this commit removes BR2_PACKAGE_LIBINTL without updating the
packages, it is done in a separate commit to ease the review process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: keep BR2_PACKAGE_LIBINTL as blind option]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The VGA16 dumping feature probably doesn't make much sense on anything
else than x86 and x86-64, as it is accessing I/O ports that seem
PC-specific.
Moreover, some architectures such as SH4, do not have an
implementation of outw() in uClibc, but we quite certainly don't care
about VGA16 support for such architectures.
Fixes:
http://autobuild.buildroot.org/results/e1c860830dd585830cf5ca5f935b81856e992334/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump dhcp to version 4.1-ESV-R7 to fix CVE-2012-3955
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mplayer configure script says that sh4a is not supported,
according to:
http://autobuild.buildroot.org/results/c6457c2dea7c1df4d8e0f23995ebfb3285a85aed/build-end.log
Apparently, sh4 is supported, but not sh4a, even though it seems that
sh4a is a super-set of sh4. So it would probably not be too difficult
to get mplayer to build/work for sh4a, but we don't have hardware to
test this easily, and we can leave this work to the first developer
who will need mplayer on sh4a: let's only support what the upstream
package supports.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On gcc10, the build of the host-vala documentation causes a
segmentation fault of xsltproc, for some unknown reason. See:
http://autobuild.buildroot.org/results/42fea25ac4fe33a56c02d90c361da1c494f79ba3/build-end.log
Therefore, this patch fixes the problem by:
* Ensuring that host-libxslt is amongst the dependency of vala when
documentation is enabled so that we build a well-known version of
libxslt/xsltproc to build the documentation. If documentation is
not enabled, then we force vala to *not* find xsltproc so that it
doesn't try to use the xsltproc of the build machine distribution
if available.
* Disabling the build of the documentation for host-vala. Note that
we need to pass ':' as the xsltproc binary name to teach the
configure script that xsltproc is not available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 32f4957b15.
Adding the phony objdir target as a prerequisite of all the .o targets
doesn't work, as they are then always considered out of date, leading
to poco getting rebuilt (without the proper MYSQL_{INC,LIB}DIR settings)
at staging-install / target-install time.
Instead simply use MAKE1 for the build step.
Fixes http://autobuild.buildroot.net/results/1cca8b4115674f12884bcbc0c680efed0fb939ae
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the new filesystem utilities category and move a bunch of packages
into it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
v2 - license type is GPLv2/BSD-3c as pointed out by Baruch Siach
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is explictly GPLv2, not GPLv2+]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
opus + jpegformat plugin builds fail when gstreamer is configured with
--disable-gst-debug as they are checking the GST_DISABLE_DEBUG symbol
instead of GST_DISABLE_GST_DEBUG.
Submitted upstream as https://bugzilla.gnome.org/show_bug.cgi?id=683850
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/8a9369fece696e012249b865708ffee533c5318a
Pppd bundles some, but not all needed kernel headers. In Linux 3.5 (and
before that 2.6.35) if_pppol2tp.h was changed, so the embedded copy was no
longer compatible.
if_pppol2tp.h has been part of the exported kernel headers since 2.6.23, so
simply drop the bundled copy and use the kernel headers instead, similar
to how it is done in Gentoo:
https://bugs.gentoo.org/show_bug.cgi?id=427684
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This update pulls in new ath6k and realtek drivers and updates for
libertas and iwlwifi:
a707c25 Merge branch 'master' of git://dev.laptop.org/users/dsd/linux-firmware
adb6547 rtlwifi/rtl8723e: Add firmware for new driver
4e17394 linux-firmware: ath6k: add firmware for AR6004 hw1.3
bac3567 Marvell SD8787: update to v14.66.9.p96
6a08d14 Marvell SD8686: update to v9.70.20.p0
bbede96 iwlwifi: update firmware for 6205
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This change is to fix the autobuild failure at:
http://autobuild.buildroot.net/results/45e2c08d5e3c868b2d7fdf26a7c5f88de5ff8f61/build-end.log
I can't actually reproduce this bug, because my machine cannot
run the 64-bit microblaze toolchain. However, the log makes
it clear that -fPIC is needed, and grepping for fPIC and fpic
under packages makes it clear that cjson should have used -fPIC
anyway. So even if the bug isn't fixed, it must surely be improved.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that the COPYING.LESSER file states that "Parts of the
software are licensed under the MIT (X11) license".
On the 0MQ mailing list, Pieter Hintjens has confirmed that
the code no longer contains any parts that are under the
MIT/X11 license. (The COPYING.LESSER file will be fixed in
a future release.)
Signed-off-by: Simon Dawson <simond@trainfx.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the replacement of GENTARGETS by package-generic, there is a risk
that local packages don't work anymore without any indication of what
is wrong. Therefore, generate an error message if the GENTARGETS,
AUTOTARGETS or CMAKETARGETS macro is still used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
-mno-abicalls is an old kludge for some (probably) old issue.
Remove it since it's actually harmful, static busybox doesn't build with
it for a modern-ish toolchain (defaults as of this commit, uClibc
0.9.33.2 + gcc 4.5.4).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Practically speaking, MIPS has three useful ABIs:
* o32 is for 32-bits CPUs, or 64-bit CPUs running only a 32-bit subset
of the instruction set.
* n32 is for 64-bits CPUs only. It has 32-bits pointers and long
integers.
* n64 is for 64-bits CPUs only. It has 64-bits pointers and long
integers.
See http://www.linux-mips.org/wiki/MIPS_ABI_History and
http://www.linux-mips.org/wiki/WhatsWrongWithO32N32N64 for more
details.
So, this commit reworks the Buildroot MIPS support by:
* Add separate mips64/mips64el top-level architectures.
* Renaming the n32 ABI option to BR2_MIPS_NABI32, for consistency
with BR2_MIPS_OABI32.
* Renaming the n64 ABI option to BR2_MIPS_NABI64, for consistency
with BR2_MIPS_OABI32.
* Make the n32 and n64 ABI selections select the BR2_ARCH_IS_64,
since those ABIs are valid on 64-bits CPUs only.
* Removing the o64 ABI, which is practicaly never used.
* Removing the "none" ABI, which really doesn't make sense.
* Introduce the mips64 and mips64el architecture names when a 64-bits
MIPS ABI is choosen. This will fix build issue like
http://autobuild.buildroot.org/results/9b8c5ea86c953a89e85e7b67e9221de41773f652/build-end.log
where gmp was confused by the fact of having a 32 bits architecture
(detected by the mips- architecture part of the tuple) but 64 bits
integer size when compiling.
* Adjust the uclibc.mk logic to support the new mips64/mips64el
architecture names, and take into account the renaming of the ABI
options.
This has been build tested by generating Buildroot toolchains and
compiling a few packages for MIPS o32, MIPS n32 and MIPS n64.
This work is originally based on prior work done by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes warning: (BR2_PACKAGE_COLLECTD_RRDTOOL) selects BR2_PACKAGE_RRDTOOL
which has unmet direct dependencies (BR2_USE_WCHAR).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mtdev2tuio is a simple application for converting touch events
to the standart TUIO 1.1 protocol.
https://github.com/olivopaolo/mtdev2tuio
[thomas.petazzoni@free-electrons.com: use TARGET_CONFIGURE_OPTS, fix
indentation, add dependency on thread support in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
liblo is an implementation of the Open Sound Control protocol
for POSIX systems.
http://liblo.sourceforge.net/
[thomas.petazzoni@free-electrons.com: add dependency on thread support
in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mtdev is a stand-alone library which transforms all variants
of kernel multitouch events to the slotted type B protocol.
http://bitmath.org/code/mtdev/
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all packages have been converted to use the
downloads.sourceforge.net URLs that automatically selects an available
Sourceforge mirror, we can get rid of the BR2_SOURCEFORGE_MIRROR
configuration variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default <foo>_SITE value that pkg-generic sets when the .mk file
doesn't declare it is using BR2_SOURCEFORGE_MIRROR and therefore isn't
consistent with the usage of downloads.sourceforge.net we have
generalized for all drivers.
Since the downloads.sourceforge.net URLs are inherently specific to
each package, we can no longer provide a default in pkg-generic.mk,
and therefore each package *must* declare its own <foo>_SITE value.
This patch fixes the only two packages that were lacking a <foo>_SITE
value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luajit amalgamation compile starts with building a host tool, and then
uses it to build itself. However, when CFLAGS is specified, as opposed to
TARGET_CFLAGS, then it is used for both HOST and TARGET builds. So if you
add something target specific into 'Target Optimizations' (for example,
'-mfpu=neon -mfloat-abi=softfp' for ARM Cortex-A8), then it gets into the
host tool compile, which then fails (because my build machine is not an
ARM Cortext-A8). This can be fixed by using TARGET_CFLAGS and
TARGET_LDFLAGS, instead of CFLAGS and LDFLAGS, respectively.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ifplugd refuses to configure without this set.
Signed-off-by: Shawn J. Goff <shawnjgoff@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages use pkg-config to check for libnss.
Add our own .pc file (vampirised from Debian).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages use pkg-config to check for libnspr.
Add our own .pc file (vampirised from Debian).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No specific GPL version is declared, so it defaults to "any version
ever published", as clause 9 of the GPLv2 states.
Fixes a05a1cc16b.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to version 1.1 (r34994).
remove --enable-largefiles configure option which was
deleted in r33321.
Discard mplayer-theora-fix.patch which is a backport
of r34498 and r34503.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/libglib2/libglib2-make-codegen-python2-python3-compliant.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add license info and the smbta-util config knob.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
renamed package to 'gsl' to match upstream name.
added license information.]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
usb_modeswitch_data provides udev rules for usb VID/PID combinations to
switch usb deices from their default mode into a more useable mode. The
default mode usually is a cdrom with installation software that is of
little use in an embedded linux situation
Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates usb_modeswitch to version 1.2.4. The
usb_modeswitch.mk needed to be modified for usb_modeswitch to compile.
Also added extra remove section for the added help scripts and files.
[thomas.petazzoni@free-electrons.com:
bumped further to 1.2.4 instead of 1.2.3, adjusted the patch accordingly
use TARGET_CONFIGURE_OPTS instead of passing CC, LD manually
add license information.]
Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is recommended to use the most recent revision from subversion as it
contains various fixes.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
Fixup indentation of Config.in file.
Add 'depends on BR2_PACKAGE_PYTHON' so that the package does not
appear when the Python interpreter is not enabled.
Add license files information, but not the license tag: the package
includes software under multiple licenses.]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
Fixup indentation in the Config.in file.
Add 'select BR2_PACKAGE_PYTHON_PYEXPAT' which is needed to get XML
support in Python.
Add license information.]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
drop the --disable-static from configuration options, the default
behavior should work without problem.
make sure the pre configure hook is also executed for the host
variant of the package.
add the project upstream URL in the package help text
]
Signed-off-by: Stefan Froberg <stefan.froberg@petroprogram.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libX11 is available, then gdk-pixbuf can be built with X11 support.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cpuload is a simple tool to obtain intuitive vision of CPU load
(including total, user, system, irq and softirq) within a certain
time, which is especially useful for embedded system without GUI.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add license info for input-event-daemon.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add license info for bwm-ng.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add license info for lmbench.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sudo executable is installed without the setuid bit set, which prevents
sudo from working.
This patch adds a post-install hook to fix the permissions of the sudo
executable.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
- add dependencies on the supported architectures to avoid build
failures on ARM and other unsupported arches
- add a patch that removes an useless warning about the kernel
version. This patch is present upstream. However since it modifies
configure.ac, we need to autoreconf the package.]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we have now two uncompatible init systems, and we want only one of
them at the same time in use in the rootfs, we need to select a
particular init system. This patch also adds $(PKG)_INSTALL_INIT_SYSTEMD
and $(PKG)_INSTALL_INIT_SYSV hooks that are called when the matching
init systems are selected to install properly the init scripts of the
package.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libusb needs thread support, and so do other packages that depend on it.
[thomas.petazzoni@free-electrons.com: adds threads dependency to
libnfc-llp, which selects libnfc.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the user has gone to the effort of manually enabling an output in
the configuration file assume that they know what they're doing.
X.org Bug 14611 <http://bugs.freedesktop.org/show_bug.cgi?id=14611>
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
udev rules are not processed for kernel events that occur before
the udev daemon is started. Call udevadm trigger to replay these
missed events.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Build less after busybox if it's enabled, since we prefer the full-blown
version over the light one if it's enabled (and busybox would overwrite
the link when built afterwards).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PPS feature of gpsd depends on the NTP shared memory time hinting feature.
This patch caused the NTPSHM feature to be enabled whenever the PPS feature
is enabled. This should fix build failures such as the following.
http://autobuild.buildroot.net/results/e58a9a9f884acb6834a8afe4a8a3d056dc509359/build-end.log
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The platform.linux_distribution method was introduced in Python 2.6. Some
of the Buildroot autobuilders still use Python 2.5, which is causing build
failures such as the following.
http://autobuild.buildroot.net/results/045f1f69bac170d8e75cb4952a2e5b4e85a677b8/build-end.log
This patch removes the linux distribution check from the gpsd SConstruct file.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that ncurses has been bumped to 5.9, it installs .pc files for
pkg-config, which allows gpsd to find it properly without the need to
specify a custom location for ncurses5-config.
Since gpsd now uses pkg-config to find the ncurses library, we also
add host-pkg-config in the dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping to 5.9 has two nice side-effects:
* It builds fine on noMMU architectures such as Blackfin, which will
fix build failures like
http://autobuild.buildroot.org/results/cf3e6a95c82b60d63da041293db576a8f21f9136/build-end.log.
* It installs a pkg-config file, which will allow gpsd to find
ncurses properly, without the need to use ncurses5-config, which
means we can get rid of one of our gpsd patches. Thanks to Mike
Frysinger for pointing the new --enable-pc-files option.
After this bump, I build tested a large number of the ncurses reverse
dependencies we have in Buildroot, and they all built fine.
Thanks to Gustavo Zacarias for the investigation on why ncurses 5.9
why segfaulting: it turned out to be caused by the
--enable-broken-linker configure option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in the name of the variable to register the hook,
which prevent the hook from actually being called.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As can be seen on the build result at
http://autobuild.buildroot.org/results/20f1078ef7dc5f187b04c63ef70e8b43acf9bb3a/build-end.log,
D-Bus requires thread support in the toolchain.
This commit adjusts the Kconfig dependencies of D-Bus and all its
reverse dependencies to depend on thread support in the toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt configuration and installation process is a bit strange, and it
leads the .pc files to contain absolute paths to the staging
directory, while it should only contains paths relative to the staging
directory, because pkg-config already adds the path of the sysroot
automatically to the headers and libraries locations.
This allows the 'pkg-config --cflags' results for Qt libraries to be
correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Python support is not cross-compile friendly (uses host compiler,
installs in wrong location, etc.) and nobody needs it at the moment,
so leave that to the first person who will need Python support for
gpsd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix should always be /usr, and destdir must be passed as DESTDIR,
and in the environment, not as a scons argument. Finally, we pass the
sysroot= argument to scons so that it doesn't add -L/usr/lib
parameters when compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following build issue with gcc 4.6:
LINK Xfbdev
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: ../../../os/.libs/libos.a(backtrace.o): undefined reference to symbol 'dladdr@@GLIBC_2.4'
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: note: 'dladdr@@GLIBC_2.4' is defined in DSO .../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2 so try adding it to the linker command line
.../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2: could not read symbols: Invalid operation
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It currently fails to build with:
libgpsd_core.c: In function 'gpsd_poll':
libgpsd_core.c:881: error: 'const struct gps_type_t' has no member named 'min_cycle'
libgpsd_core.c:884: error: 'const struct gps_type_t' has no member named 'min_cycle'
and is probably not a very important feature for normal users of gpsd.
The build problem has been reported to the gpsd-users mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 9ba9bfb9a0 inverted the logic to
define $(2)_SUBDIR, breaking the build of things using the _SUBDIR
feature, like the tcl package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like we have AUTOMAKE, AUTOCONF or QT_QMAKE, let the scons
package provide a SCONS variable that points to the scons host binary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix for CVE-2012-2688 (potential overflow in _php_stream_scandir),
CVE-2012-3365 (SQLite open_basedir bypass) and other misc bugfixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/tar/tar-1.26-no-gets.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/m4/m4-1.4.16-no-gets.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS allows to pass the correct CC, CXX, CFLAGS,
CXXFLAGS, etc. For example, it allows the elftosb build process to
properly use ccache when available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a new config option BR2_PRIMARY_SITE_ONLY that, when set,
restricts package downloads to the specified BR2_PRIMARY_SITE. If the package
is not present on the primary site, the download fails.
This is useful for project developers who want to ensure that the project can
be built even if the upstream tarball locations disappear.
[thomas.petazzoni@free-electrons.com:
Extend config option help message with more details coming from the
commit log. Added a dependency on the fact that a primary site has
been defined. Without any primary site (the default configuration),
this new option does not make any sense.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using one of the package infrastructures, the DOWNLOAD function
uses $(PKG)_SITE_METHOD to determine the appropriate download method,
which is autodetected based on the URI if none was explicitly set.
When the DOWNLOAD function is called directly, for example when
downloading a toolchain, or from a package that does not use one of
the package infrastructures, the SITE_METHOD is not autodetected,
and thus the download defaults to wget.
This patch adds URI scheme detection directly to the DOWNLOAD method,
in case no SITE_METHOD was detected yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The localfiles download method uses $($(PKG)_SITE))) and
$($(PKG)_SOURCE) instead of $(1) and $(2). This means that it can only
be used for package downloads (through gentargets, autotargets, ...)
and not for other downloads like external toolchains.
This patch changes localfiles to allow this, just as the wget and scp
download methods already did.
For the version control download methods, nothing changes.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Elftosb is a Freescale toolset to build binary image files (like U-Boot.sb)
to be used with CPUs imx23, imx28, stp37xx
thomas.petazzoni@free-electrons.com:
* Add -m 0755 when installing binaries
* the _CLEAN_CMDS is not supposed to uninstall things from the
HOST_DIR.
* Use 'host-generic-package' instead of 'GENTARGETS,host'
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
slightly adjust the installation process to just do a loop of calls
to $(INSTALL).]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
add patch that creates a standard setup.py file. This allows the
.pyc files to be generated at build time, and installed into the
target. This is important because by default, Buildroot removes all
.py files from the target, to keep only the .pyc files. The
python-nfc.mk file was changed to use this setup.py standard build
process.]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Installation of host-lua was failing because it was the first package
to be built, and $(HOST_DIR)/usr/lib didn't exist. Therefore, use
install -D everywhere so that intermediate directories are created as
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 4.6 has become more sensitive about option ordering, especially
libraries. It requires the -l flags to be placed after the object
files that need that library. See for example
http://nick.zoic.org/art/etc/gcc-linker-libs.html. We had -llua at the
beginning of the link command line, causing build issues (here on gcc
4.6 with host-lua).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ad6af5819f removed the
HOST_LUA_DEPENDENCIES assignement to the empty variable, so from that
commit, the dependencies of host-lua are automatically computed from
the dependencies of lua. Since lua can depend on readline and ncurses,
it means that host-lua can depend on host-readline and host-ncurses,
and the host-readline package does not exist in Buildroot. Since there
is no reason to build host-lua with readline/ncurses support, just
re-add the HOST_LUA_DEPENDENCIES variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
This patch adds the libnfc-llcp package.
This package requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps the libfreefare package from version 0.3.2 to version 0.3.4.
Version 0.3.4 requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bwm-ng can monitor not only network bandwidth but also disk-io
bandwidth, so it is more appropriate to put bwm-ng into System tools.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As sam-ba is delivered as a binary for x86
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
BR2_PACKAGE_LUA_SHARED_LIBRARY is an internal of lua package
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libnfc package is currently at version 1.5.1 in Buildroot. This patch
bumps the version to a recent svn revision, for the following reasons.
* Version 1.5.1 is marked as "unstable" on the libnfc download site.
* The nfc-tools project at
http://code.google.com/p/nfc-tools/
includes a library that extends libnfc with LLCP functionality.
Unfortunately, to build this requires a libnfc version no lower than 1.6.
The version 1.6.0-rc1 Release Candidate does not build; svn commits to fix
the build problems have not yet been back-ported into a Release Candidate.
* The libfreefare package is currently at version 0.3.2 in Buildroot. To bump
this to the most recent version (0.3.4) also requires a libnfc version no
lower than 1.6.
I suggest that this patch be regarded as a temporary fix, pending the release
of libnfc 1.6, which will allow other dependent packages to be progressed in
the interim.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also, as the kernel.org archives are back up, use them as official site
again.
[thomas.petazzoni@free-electrons.com: use BR2_KERNEL_MIRROR]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The --enable-threadsafe option was unconditionally passed, without
taking into account whether the underlying toolchain had thread
support or not. Now, we properly pass --enable-threadsafe or
--disable-threadsafe depending on the availability of thread support.
Fixes
http://autobuild.buildroot.net/results/defdc098cff293baabf2f89587476eba71f1c0d0/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (found on x86_64, but probably others too),
libnss builds with -m32 unless it is configured for 64-bit build. So
force 64-bit build on 64-bit architectures.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (found on x86_64, but probably others too),
libnspr builds with -m32 unless it is configured for 64-bit build. So
force 64-bit build on 64-bit architectures.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a patch rather than sed'ing files in the build process.
Signed-off-by: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create host-generic-package, host-autotools-package and
host-cmake-package macros. Such a macro is more intuitive to use than
the $(call ...,host) construct. Also it speeds things up by having
one less $(call ...) evaluation.
Also includes documentation update, but not for buildroot.html.
This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target package was only present because at the time 'nasm' was
packaged, there was a bug in the package infrastructure that prevented
a package from having a host only variant. This has been fixed since
then, so we can get rid of the useless dummy target package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to automatically collect material that may be needed to comply with
the license of packages that Buildroot prepares for the target device.
The core of the implementation is made by the following parts:
- in package/pkg-utils.mk some helper functions are defined for common actions
such as generating a warning, producing info about a package etc;
- in package/pkg-gentargets.mk, within the GENTARGETS framework, a new
<PKG>-legal-info target produces all the info for a given package;
- Makefile implements the top-level targets:
- legal-info-prepare creates the output directory and produces legal info
about Buildroot itself and the toolchain, which mostly means just warning
the user that this is not implemented;
- legal-info, the only target that is supposed to be used directly, depends
on all of the above and finishes things by producing the README files from
the various pieces.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update Config.in and .mk according to the new features.
Remove the patch handling build with uclibc without long double support,
which seems not necessary anymore.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump cifs-utils to version 5.5
Also switch to http source instead of ftp.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When HOST_XXX_DEPENDENCIES are derived automatically from
XXX_DEPENDENCIES, a self-dependency is created if host-xxx is a dependency
of xxx. This was the case for miniperl.
Filter out the self-dependency.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com: rewrote the patch, which was
corrupted in the original submission. Used quilt to refresh the Lua
patches, so that the version numbers are no longer present in the file
names]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Configuring libmad with --enable-speed compromises accuracy and can cause audio
clipping in some cases (heard on ARM platform with some loud MP3s), so give
users the choice of MAD optimizations.
The default config corresponds to the default behavior of libmad's configure.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
The -fPIC breaks the purgatory of kexec (= the code that passes command-line
arguments to the kernel): kexec doesn't know how to handle the GOT and PLT
relocation entries.
There is also no reason at all to pass -fPIC. Shared libraries that require
it will add it to their local Makefiles, and normal executables have no
business with -fPIC (plus it adds overhead...).
The -fPIC was added by Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
in commit 8027784c. That commit adds sysroot parameters to CFLAGS.
There is no explanation why -fPIC is also added for x86_64.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Because beecrypt needs threads rpm does too since it's a mandatory
dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a wget download is interrupted, the downloaded file is still created.
It will therefore not be re-downloaded in the next build, and the
extraction will fail.
To avoid this, download to a temporary file first and rename when the
download is successful.
The existing mechanism doesn't work for interrupted downloads because the
whole sub-shell is interrupted, so the rm-part never gets executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Mercurial branch may change, which leads to non-reproducible builds.
So download a released version instead.
Also add configure option for e1000e.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
canusb support in libpcap uses pthreads but the configure script doesn't
account for -lpthread usage so it doesn't get added into LIBS which in
turn doesn't add the appropiate entry in pcap-config, causing build
failures for programs that link to libpcap that don't use pthreads
themselves (for example tcpdump).
Also add the conditional dependency on BR2_PACKAGE_LIBUSB for canusb.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump samba to version 3.6.6
Lots of bugfixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The official ImageMagick site only keeps the latest versions. Even in
the legacy/ directory, they only keep the last version of each
'branch'. Therefore, to avoid problems, we use an alternate download
site.
Fixes
http://autobuild.buildroot.org/results/2269aa42a0a21730ff0ec28af89cd4973ec28751/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed out on IRC, the static tools causes problems on distributions
without glibc-static, and we don't need them - So just disable them like
we do for the target build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: build using make instead of scons, fixup whitespace, target install]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When BR2_JLEVEL is 0, set PARALLEL_JOBS to double the number of CPUs
detected. This allows one to more or less fully utilize the host
system without manually tuning the configuration.
Also make 0 the default value for BR2_JLEVEL.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_JLEVEL currently is expanded directly in $(MAKE), and used in
invocations of other build software (e.g. ct-ng). However, we are
going to allow "0" to be a meaningful value for BR2_JLEVEL, which
won't work for these uses. Given that it is not permissible to modify
BR2_-prefixed variables in Makefiles, we need an intermediate
variable.
Define PARALLEL_JOBS to $(BR2_JLEVEL), and use the former in MAKE's
definition. Uses of BR2_JLEVEL throughout the rest of the tree to be
adjusted similarly in follow-up patches.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix help text whitespace]
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GStreamer requires xorg support in order for the ximagesink and xvimagesink
plugins to be available.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a few utility functions to pkg-utils.mk.
Functions finddirclauses and findfileclauses help in building a find command
that skips a set of directories and performs operations on a set of files.
This pattern can for example be used to keep certain files or directories from
being stripped, or to remove certain files from a package installation.
The notfirstword function is the inverse of the 'firstword' function in make:
it returns all but the first word.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
inadyn is a DynamicDNS client/updater which works with dyndns.com, noip.com
and many other DDNS providers. It is minimal in footprint and requirements,
supports IP caching, multiple providers, multiple domain names, and
a variety of other situations.
[Peter: fixup whitespace / trailing spaces]
Signed-off-by: Dave Purdy <david.c.purdy@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xinetd's configure does not set up an AR variable, and there
are no libtool files to autoreconfigure. So instead, lets
pass in AR during the build.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Expand the openWRT patch to fix xinetd's "uninstall" target,
so that buildroot's "xinetd-clean" removes the correct files.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 5.1.63 to fix CVE-2012-2122
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Running sudo on the target fails with the following errors.
sudo: /usr/libexec/sudoers.so: No such file or directory
sudo: fatal error, unable to load plugins
The problem is that the installation of the sudo package is broken. This patch
replaces the hand-crafted install rule with the default AUTOTARGETS install.
Unfortunately, the default install fails because it includes a step that
invokes the cross-compiled visudo binary. A patch is provided here to disable
this visudo invocation, which is for sanity checking only. This local patch is
a backport of upstream commit 8209:0c4e3f68b2f5; the real fix will be in the
1.8.6 release of sudo.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The upstream URL for Buildroot packages is usually visible in the Config.in
file, not in comments in the Makefile.
Moreover, this URL does not point to the correct upstream project.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that liburcu-0.6.7-missing-gnu-source.patch has been merged upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
delete mode 100644 package/liburcu/liburcu-0.6.7-missing-gnu-source.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump php to version 5.3.14 to fix CVE-2012-2143 and other assorted bugs.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If openssl is not selected, configuration fails for the libfreefare package
as follows.
configure: error: Cannot find libcrypto.
This patch adds the missing dependency on openssl.
[Peter: use select instead of depends on]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This removes fbv's compulsory dependency on either libpng and/or libjpeg and/or libungif.
The user can choose which compressed image format's fbv should support.
By default PNG, JPEG and GIF are selected.
Note that BMP format support will still always be included.
[Peter: Drop (unneeded) png specific libs]
Signed-off-by: Arn R <arnerro@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump bind to version 9.6-ESV-R7-P1.
Fixes CVE-2012-667.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix bug #5276 by disabling IPv6 when the toolchain lacks it.
It builds fine even if it's enabled but it probably doesn't work fine.
Also bump to version 8.4:
* MaxServerLoad option added.
* Bugfix: invalid reverse proxy request when URL parameters are present.
* PolarSSL updated to version 1.1.4.
* Small bugfixes and improvements.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Configuration fails for the monit package, with the following error.
checking for SSL library directory... Not found
Couldn't find your SSL library files.
Use --with-ssl-lib-dir option to fix this problem or disable the
SSL support with --without-ssl
Tweak the monit configuration command line so that openssl is found.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bugfix release:
* Fix: Work around failure of ETHTOOL_GSSET_INFO for unprivileged
users (-k option)
* Fix: Report any unexpected error code from ETHTOOL_GSSET_INFO
(-k and -K options)
* Doc: Fix the date of the man page to match the last update
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Correctly handle empty SSL/TLS packets (Found by James Yonan)
* Fixed potential heap corruption in x509_name allocation
* Fixed single RSA test that failed on Big Endian systems
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In fact, not only qt can install stuff in $(STAGING_DIR)/usr/mkspecs,
but also libraries that wish to integrate with qmake, such as
qwt. However, qmake and al. will look inside $(HOST_DIR)/usr/mkspecs,
so the easiest solution is to have a symbolic link between the two
directories, instead of copying things around.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Install into /usr/sbin]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are some tools, like flashrom, that build against libraries of
pciutils.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While most packages that rely on libcurl use pkg-config, a few
packages (such as libxmlrpc) still use curl-config. So we need to fix
up the prefix locations in the curl-config script installed in
STAGING_DIR.
[Peter: only fixup if prefix=/usr]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix the plugin search path by passing a --prefix to configure.
DESTDIR is used in the source code for the search path of plugins
(DESTDIR/lib/pppd/VERSION).
Since DESTDIR defaults to /usr/local we get the search path wrong so the
'plugin' directive requires a full pathspec to the plugin rather than
the .so name, which isn't nice or portable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These tools only are useful for ARM (OMAP) targets.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump bzip2 to version 1.0.6 to fix CVE-2010-0405
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bind plugin requires libcurl and libxml2.
These are properly selected but never added to COLLECTD_DEPENDENCIES.
Fix that.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix WDDX extension build failure.
The documentation and source are conflicting about this, in theory
libexpat support is deprecated and libxml2 can replace it, but it seems
not so for WDDX, so pull in expat for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Zebra daemon now requires IPv6 support so disable it for non-IPv6
toolchains and add a comment mentioning it.
The BABEL protocol/daemon also requires IPv6 so just enable it when it's
available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
PHP requires that net-snmp be built with the ability to load MIB code,
so force it on when the extension is enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, webrtc-audio-processing only provides support for the following
architectures (see src/typedefs.h from the source directory):
- x86_64
- i*86
- armel
Fixes http://autobuild.buildroot.org/results/ff777bb06eddafa71327015e1d39fe911c1439d8
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The optional webrtc echo canceller is written in C++, causing auto* to want
to link module-echo-cancel.so with CXX even if webrtc ISN'T used.
If we don't have C++ support enabled in BR, CXX will point to /bin/false,
which makes configure think we aren't able to create C++ .so files
(arguable true), breaking the build when it tries to install the .so
workaround it by patching up the libtool invocations to use C mode instead.
Fixes http://autobuild.buildroot.net/results/114e5bf0086f2394b36f17a70cb54b357a72413c
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The explicit gnutls prefix in combination with the libc.so linker script
and non-default sysroot seems to confuse external toolchains, causing
configure to error out. Workaround it by not using an explicit libgcrypt
prefix as it is installed in the sysroot anyway.
Fixes http://autobuild.buildroot.net/results/3b3901bea904bf32bccbd3e9a4274d604776cb98
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't really need C++ support on Linux, but the configure script
checks for it (and fails if not available), and the package is not easy
to autoreconf as there's C++ source files for Android/Windows, causing
automake to fail if AC_PROG_CXX isn't set.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump nfs-utils to version 1.2.6
Portmap or rpcbind (which we don't have) is required so select it.
Remove nfsiostat if there's no target python.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: add upstream URL, fix dep, drop explicit bluetooth option, no AUTORECONF]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mtd-utils with no sub options enabled should be a noop, but we end up
calling make with the default target (E.G. to build everything), breaking
the build if zlib/lzo aren't available.
Fixes http://autobuild.buildroot.net/results/a0781db394792e6d3831c1884fc4bb3525fedb2e/
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump hiawatha to version 8.3 - adds reverse proxy functionality.
Also define WORK_DIR to /var/lib/hiawatha instead of the uncommon
/usr/var/lib/hiawatha - missed it in the last path fixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This problem was already fixed by Markos Chandras for wget, but not for scp.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable IEEE 802.11u (interworking).
Also enable new supported EAP methods.
Switch from echo to sed where possible for a cleaner .config output
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable IEEE 802.11u (interworking).
Also enable new supported EAP methods.
Switch from echo to sed where possible for a cleaner .config output
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch was added after the multimedia category reorganization so it
became unreachable.
Move it to the final libmpeg2 package directory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
