Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Tested with qemu_aarch64_virt_defconfig.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Tested with qemu_arm_vexpress_defconfig.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The arm-trusted-firmware package builds a host tool called "fiptool",
which is used during the build process of arm-trusted-firmware
itself. This tool links against the OpenSSL host library, and
therefore needs to be built with the correct RPATH pointing to
$HOST_DIR/lib.
This is why commit a957d9a90a
("boot/arm-trusted-firmware: build fiptool separately with dependency
o n host-openssl") added the ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL
variable, which builds the fiptool tool first, with the right
variables set, before invoking the full build of TF-A. This ensured
that fiptool was built with the correct RPATH.
However, more recent versions of TF-A have modified their Makefile
machinery, and fiptool is being rebuilt even if it was built
before. Unfortunately, this rebuild is no longer done with the right
flags, so we end up with a fiptool binary that no longer has the right
RPATH, and fiptool fails to find the OpenSSL libraries from
$HOST_DIR/lib.
In order to fix this, we take a different approach: we do not build
fiptool separately first, but we inject the necessary flags through
the HOSTCC variable. Indeed, there's no HOST_LDFLAGS or HOST_LDLIBS
variable or similar that would allow us to pass the -Wl,-rpath flag
that is needed. Shoe-horning this flag into HOSTCC gets the job done,
and actually simplifies our arm-trusted-firmware.mk.
This patch break the compatibility with version prior to 1.4 (upstream
commit 72610c4102990 ("build: Introduce HOSTCC flag")). v1.4 is very old
(July 2017), not used anymore in-tree and probably not used anymore
outside the tree.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-authored-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following CVEs:
CVE-2023-39326: net/http: limit chunked data overhead
CVE-2023-45285: cmd/go: go get may unexpectedly fallback to insecure git
https://go.dev/doc/devel/release#go1.21.5
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"This is a security release" according to the upstream release notes:
https://news-web.php.net/php.announce/369
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e6252e5b6d)
[Peter: drop Makefile/Vagrantfile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5abe7bd726)
[Peter: drop Makefile/Vagrantfile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump will fix the following build failures with kernel >= 6.3.0
thanks to
f3559e5b06
and
939200ef16:
In file included from /home/buildroot/autobuild/instance-1/output-1/build/lttng-modules-2.13.7/./src/lttng-ring-buffer-client.h:16,
from /home/buildroot/autobuild/instance-1/output-1/build/lttng-modules-2.13.7/./src/lttng-ring-buffer-client-discard.c:16:
/home/buildroot/autobuild/instance-1/output-1/build/lttng-modules-2.13.7/./src/../include/lttng/events-internal.h:292:9: error: unknown type name ‘uuid_le’
292 | uuid_le uuid; /* Trace session unique ID (copy) */
| ^~~~~~~
[...]
/home/thomas/autobuild/instance-3/output-1/build/lttng-modules-2.13.7/./src/lib/ringbuffer/ring_buffer_mmap.c: In function ‘lib_ring_buffer_mmap_buf’:
/home/thomas/autobuild/instance-3/output-1/build/lttng-modules-2.13.7/./src/lib/ringbuffer/ring_buffer_mmap.c:116:23: error: assignment of read-only member ‘vm_flags’
116 | vma->vm_flags |= VM_DONTEXPAND;
| ^~
https://github.com/lttng/lttng-modules/blob/v2.13.10/ChangeLog
Fixes:
- http://autobuild.buildroot.org/results/7b8f57262a02cd9aaa953a9d8666646bae1cc655
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When an error occurs, the gitlab-ci job log doesn't contain any useful
information than the name of the failing test:
FAIL: test_run (tests.package.test_python_paho_mqtt.TestPythonPahoMQTT)
In order to encourage contributors to investigate issues reported by
gitlab-ci, we want to print the last lines of the log file (build or
runtime).
Unfortunately, gitlab-ci job log completely strips lines ending with
CRCRLF [1][2]. We have to take a look at the gitlab-ci raw log to see
the complete log [3].
To workaround this issue, remove crlf from qemu serial stdio log
while printing in the gitlab-ci job log (we don't want to change
the log file generated by support/testing/run-tests and saved as
artefacts).
[1] https://gitlab.com/gitlab-org/gitlab/-/issues/218771
[2] https://gitlab.com/kubu93/buildroot/-/jobs/5492937691
[3] https://gitlab.com/kubu93/buildroot/-/jobs/5492937691/raw
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PLM xilinx_v2023.2
- PSMFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following options were wrongly kept when bumping to version 3.0.3 in
commit 18420d9b6b:
- dmraid (dropped since
d174944a85)
- bcache and kbd (dropped since
c1ff1c87e3)
- python2 (dropped since
8fc33b8345)
- vdo (dropped since
e51faac2a9)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version
1.1.4 in commit 7205df8a4f:
CMake Error at /home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/bin/cmake_install.cmake:60 (file):
file RPATH_CHANGE could not write new RPATH:
$ORIGIN/../lib
to the file:
/home/autobuild/autobuild/instance-13/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/bin/memcapable
No valid ELF RPATH or RUNPATH entry exists in the file;
Call Stack (most recent call first):
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/cmake_install.cmake:52 (include)
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/cmake_install.cmake:52 (include)
Fixes:
- http://autobuild.buildroot.org/results/778ff517d465896f54a3cd5316a66c54f66fd4cb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add firmware files for RTL8851 and RTL8852 cards used by the rtlbt driver.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 51d6d6c580.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
51d6d6c580 (Fix rasberry Pi 64bit firmware overlay inclusion); the
commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6021f3678b.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
6021f3678b (board/raspberrypi: handle dtb overlays for all variants);
the commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As upstream developer mentioned in private communication, the code using
NETDB_INTERNAL is now disabled. Remove the patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imx6ulz supports freescale-imx too so let's add it to the bool name for
completeness.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Switch site to get latest release
- Drop all patches (already in version)
- Update hash of COPYING-LGPL, empty lines removed with
cceb1b2d80
- Pass $(TARGET_CONFIGURE_OPTS) to install targets to avoid using wrong
values since
abdf4074c3https://github.com/johnsonjh/duma/blob/VERSION_2_5_21/CHANGELOG
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--with-ssl-dir will exclusively search for dynamic library so use
--with-ssl-static to fix the following openssl static build failure
raised since bump to version 5.33.0 in commit
8cedb39764:
checking for static SSL support... disabled
checking for SSL support... enabled
checking for SSL include directory... /home/buildroot/autobuild/instance-2/output-1/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include
checking for SSL library directory... /lib64
[...]
mipsel-buildroot-linux-uclibc-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/lib64'
Fixes:
- http://autobuild.buildroot.org/results/4189decbafb5d28c11d89ddac792b4610abeaff1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
