Since commit 4e1dbd063d ("package/bdwgc:
bump to version 8.0.0"), we no longer have any patch that requires
autoreconf. In addition, the libtool shipped with the package seems to
no longer be bogus, because it builds perfectly fine without
autoreconf. Therefore, let's drop this autoreconf.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes [1] (for older toolchains not providing this header):
CC keytable.o
In file included from bpf.h:26:0,
from keytable.c:37:
../../include/linux/bpf.h:12:10: fatal error: linux/bpf_common.h: No such file or directory
#include <linux/bpf_common.h>
^~~~~~~~~~~~~~~~~~~~
[1] http://autobuild.buildroot.org/results/d22c0939eed4bc949f7eaeae7595d01ec45cc2cd
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We used to exclude GCC's test-suite for quite some time now
mostly for the sake of space reduction.
But:
1. On each GCC version bump we need to revise that functionality
as we need to accommodate changes in GCC sources and this
couldn't be automated
2. The space reduction is significant, but not huge. The two test
suites together take up 290MB, out of 660MB total for GCC (each of
them times two because there is the -initial and -final copy).
However, whenever we build GCC, we also have kernel headers (about
900MB) and a libc (e.g. glibc is 250MB). So at best, it saves less
than 20%.
3. It doesn't really save on build time either.
Below are timings of 2 runs on my laptop:
a) Vanilla master:
--------------------->8---------------------
time make host-gcc-final
real 7m15.114s
user 19m36.611s
sys 2m26.927s
--------------------->8---------------------
b) master + testsuite:
--------------------->8---------------------
time make host-gcc-final
real 7m59.860s
user 20m21.668s
sys 2m36.618s
--------------------->8---------------------
From figures above it's seen that difference is ~45 seconds
or ~10%. On both host-gcc-initial and -final we may save ~1.5
minutes... but these are not the only components we build and
compared to a total toolchain build time IMHO it is not that
much time to care especially traded for maintenance costs
on GCC version bumps.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: add explanation about size impact.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds davici which is an alternative implementation of the
VICI client protocal used by Strongswan. It targets better integration
with software stacks and uses a asynchronous, non-blocking API that can
be integrated in third-party main dispatching loops without the use of
threads.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
[Thomas: fix license, it's LGPL-2.1+, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- lua 5.3 or luajit is not supported
- Don't specify the path to find lua as pkgconfig is used for lua
(this is not the case for the other options)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Optional dependency to libssh has been added with version 2.2.1 and
d6da95231e
- Specify the path to found libssh as this is done for other options
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages have archive name that is different from package name.
For example websocket-client's archive name is websocket_client-*.tar.gz.
scanpypi expects the temporary extract folder to be:
/tmp-folder/BR-package-name/PyPI-packagename-and-version
In the case of websocket-client package the real extraction folder
will be different from the expected one because of the '_' in the
archive file name.
Use archive file name instead of package name to specify the extraction
folder. As the version is already part of this file, we don't need to
specify it.
Bonus: remove obsolete "return None, None" as the function doesn't return
anything. OSError class doesn't provide "message" member, so replace it
with "strerror".
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=11251
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove first patch (already in version):
7c13fb8fcc
- Remove second patch (already in version)
- Update license hash: Update header copyright (add Ivan Maidanski), see
3bd265a64b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
external.desc must be present when using a br2-external tree. The
documentation notes this later in the text, but the file is missing
from the initial overview of files.
Fixes bug #11481.
Signed-off-by: Philipp Wagner <mail@philipp-wagner.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Suppose we use Makefile wrapper and build some project out of
buildroot tree (O=...). A command like "make
busybox-all-external-deps" will output the string "uname 022 && make
..." to stdout before the usefull information. It pollutes stdout. At
the same time if we use the same command in the buildroot source-tree
then we don't get the additional output. This patch makes wrapper
silent by default. People who prefer to see more verbose output can
use V=1.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add hash for the license file.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The django-admin cli tool is loaded as entry point with pkg_resources,
which is provided by setuptools.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use CFLAGS_EXTRA to pass C and C++ flags in a single variable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream removed support for non-wchar toolchains:
85feb77aa0
Propagate the new dependency to other packages.
Fixes
http://autobuild.buildroot.net/results/b73/b73342a39167ed7f293224d4e3b23dde691b9abf/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: also propagate to the php, qt and qt5base packages.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, utils/scancpan always outputs what should be placed in
package/Config.in to include all Perl packages Config.in
files. However, in practice, this is only useful when a new package is
added. This commit adjusts this behavior so that what should be place
in package/Config for Perl packages is only displayed when scancpan
has produced a new Buildroot package for a Perl module.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pip needs pkg_resources, which is installed with setuptools.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the filesystems do not depend on building host-tar when it
is needed, even though all of them have to extract the intermediate
tarball.
However, in degenerate (but legally valid) configurations with no
user-selectable package selected, host-tar would not be built, so the
rootfs images would use whatever improper tar the system has.
Add the conditional dependency to host-tar to the rootfs-common
intermediate image. Since this is the internal step that all real rootfs
generators depend on, they now properly depend on host-tar when needed.
In practice, when host-tar is needed, it will always be built before the
rootfs images, because it is a dependency of all packages (except a very
few, like the skeleton), of which host-fakeroot, which is a mandatory
dependency of rootfs-comon anyway. But for consistency sake, let's
explicitly add host-tar as a dependency to rootfs-common too.
Note that rootfs-tar already had that dependency, and we leave it as-is
because it is semantically correct, even if superfluous.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Three of our download backends need a host tar that can generate
reproducible archives: cvs, git, and svn. The other two, bzr and hg,
use their internal implementation.
So, for those three that need it, and a dependency on host-tar when the
system tar is not appropriate.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For some packages, we may need to have a certain set of host-tools built
before the download of said packages are attempted. For example, when
the system tar is not suitable, we will want to build our own tar before
we attempt a git download (because we generate a tarball in the git
backend).
Mimick the _EXTRACT_DEPENDENCIES, and introduce _DOWNLOAD_DEPENDENCIES.
As for _EXTRACT_DEPENDENCIES, we do not document _DOWNLOAD_DEPENDENCIES,
on the assumption that it is mostly for internal use.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the pkg-inner macros, all variables, but the positional arguments,
must be $$-prefixed, so that they are expanded only when the macro is
evaluated in each package, not when the macro is parsed.
It is to be noted, though, that the current code, even though
incorrect by the above rules, seemed to work. However, the upcoming
addition of download dependencies, mimicking that code, would not work
unless it was $$-prefixed.
So, for consistency sake, and for correctness sake, let's always use
the $$-prefix in the inner macro.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch to skip RPATH fixing performed by Meson was removed in commit
a03f46ca6e, as the script
support/scripts/check-host-rpath was not complaining anymore.
But without it, the problem still occurs for host packages [1].
So, restore this patch to fix build of host packages with Meson.
[1] http://lists.busybox.net/pipermail/buildroot/2018-October/232956.html
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump version to 0.30.0.
The signature of the tarballs have been verified and their hash compared to the
upstream reference.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since glibc 2.28
(https://savannah.gnu.org/forum/forum.php?forum_id=9205), the obsolete
functions encrypt, encrypt_r, setkey, setkey_r, cbc_crypt, ecb_crypt,
and des_setparity are no longer available to newly linked binaries, and
the headers <rpc/des_crypt.h> and <rpc/rpc_des.h> are no longer
installed. These functions encrypted and decrypted data with the DES
block cipher, which is no longer considered secure. Software that still
uses these functions should switch to a modern cryptography library,
such as libgcrypt.
So retrieve an upstream patch to use openssl instead of these functions
and a new patch to remove the unsafe header/library path
'-I/usr/include/openssl'
Fixes:
- http://autobuild.buildroot.org/results/c13ca8b8afa8de700caf8cd2fa1812b8552b3f4a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Amarula A64-Relic board has AP6330 WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6330 chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Amarula A64-Relic board
with below features:
- U-Boot 2018.07
- Linux 4.17.0-rc6
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y and
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch 0001. We patch the configure script directly in patch 0002,
and we don't autoreconf. So this patch has no effect (never had).
Rename patch 0002. The next version bump should drop this patch as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgpg-error version 1.28 added support for riscv64.
Cc: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/python-async-timeout/python-async-timeout.mk:6: should be a blank line (http://nightly.buildroot.org/#writing-rules-mk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/python-yarl/python-yarl.mk:6: should be a blank line (http://nightly.buildroot.org/#writing-rules-mk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
