Support for old 32-bit ARM boards (i.e. ARMv5, ARMv6, ARMv7a) without
virtualization has been dropped since
9fcd696924
resulting in the following build failure since bump to version 0.3.1 in
commit c4f8b89687:
*** Can't find default configuration "/home/giuliobenetti/autobuild/run/instance-3/output-1/build/xvisor-0.3.1/arch/arm/configs/generic-v6-defconfig"!
*** Can't find default configuration "/home/giuliobenetti/autobuild/run/instance-0/output-1/build/xvisor-0.3.1/arch/arm/configs/generic-v7-defconfig"!
As spotted by Thomas Petazzoni in
https://patchwork.ozlabs.org/project/buildroot/patch/20220125190650.107677-1-fontaine.fabrice@gmail.com,
"ARM32 cores that support the ARMv7ve instruction set are still
supported by Xvisor. This means that Cortex-A7, Cortex-A12, Cortex-A15
and Cortex-A17, which are all ARM32 cores, are still supported"
Fixes:
- http://autobuild.buildroot.org/results/1211bf6ff10c75815fa3ac320532fab5fe649a2b
- http://autobuild.buildroot.org/results/2bcbbb270df71d2489b7bc83e56c898c58cc90d2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Override neon check to avoid the following build failure with uclibc-ng
raised since bump to version 5.0.1 in commit
df3f0c226f:
src/arch/simddetect.cpp:61:14: fatal error: sys/auxv.h: No such file or directory
61 | # include <sys/auxv.h>
| ^~~~~~~~~~~~
It should be noted that a patch to properly fix this build failure was
rejected by upstream as "ARM support without NEON would result in a very
slow Tesseract": https://github.com/tesseract-ocr/tesseract/pull/3717
So, a follow-up patch adding a dependency on !BR2_TOOLCHAIN_USES_UCLIBC
for all CPU architectures or only for ARM without NEON could be
approriate.
Fixes:
- http://autobuild.buildroot.org/results/0bac6491188b6681df2ca13eb230706e83cbb130
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- add 'touch' workaround for missing disk-utils/raw.8 file ([1], [2]) in
util-linux-2.37.3 release download package
For details see [1].
[1] https://www.spinics.net/lists/util-linux-ng/msg17037.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: put fix in POST_PATCH instead of PRE_COMPILE hook]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable tests which are enabled since bump to version 2.0.35 in commit
13d4856b91 and
466a0b3c26
to avoid the following build failure if cmocka is built before
netopeer2:
In file included from /home/buildroot/autobuild/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/stdint.h:20,
from /home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/lib/gcc/riscv64-buildroot-linux-musl/10.3.0/include/stdint.h:9,
from /home/buildroot/autobuild/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/libyang/libyang.h:18,
from /home/buildroot/autobuild/instance-2/output-1/build/netopeer2-2.0.35/tests/test_sub_ntf.c:27:
/home/buildroot/autobuild/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/bits/alltypes.h:53:24: error: conflicting types for 'uintptr_t'
53 | typedef unsigned _Addr uintptr_t;
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/0660a4f767d5cdaf07b28a508101b87f0300850f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: tests/fs-tests/integrity/integck-integck.o: in function `check_failed.constprop.0':
integck.c:(.text+0x96c): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/9409ebf6517db87672f3f4df5909a8ac4abfe8af
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since commit
4e36e8f208:
/tmp/instance-1/output-1/build/hiawatha-11.1/mbedtls/library/ecjpake.c: In function 'self_test_rng':
/tmp/instance-1/output-1/build/hiawatha-11.1/mbedtls/library/ecjpake.c:973:5: error: 'for' loop initial declarations are only allowed in C99 mode
for( size_t i = 0; i < len; i++ )
^
Fixes:
- http://autobuild.buildroot.org/results/1befc1552af91f34c600229138910c2078c2fdca
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed a few variables, as they were only used to communicate
between the meson package and pkg-meson.mk and are not needed
anymore.
Moved cross-compilation.conf.in out of meson package.
Creating the cross-compilation.conf files for packages is now
using the original template.
To avoid duplicate code, the common sed pattern is stored in
a make variable.
Use explicit Buildroot variables for compiler tools,
and some fixes. (TARGET_LDFLAGS and TARGET_CXXFLAGS
were mixed up with PKG_TARGET_CFLAGS)
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: keep PKG_MESON_INSTALL_CROSS_CONF in
TOOLCHAIN_TARGET_FINALIZE_HOOKS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move all logic related to handling meson packages to the
package/pkg-meson file. This now mirrors the other build
systems and keeps the package itself clean.
Correctly prefix variables with PKG_MESON_
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
size-stats-compare gives an overview of the size increase/decrease between
two cases, based on packages-file-list.txt. The 'detail' mode gives info per
file, otherwise per package.
But sometimes, you want the detailed per-file info, but only for a specific
package. Since the detailed output no longer lists the package name, you
cannot simply grep for it. A workaround was to filter the input
packages-file-list.txt's first, and then pass these filtered versions to
size-stats-compare.
Make this easier by adding the package name next to the filename in detailed
output. This allows grep'ing normally.
For example:
$ utils/size-stats-compare orig new -t 100 -d | grep ebtables
-67712 removed ebtables lib/ebtables/libebtc.so
-66764 removed ebtables lib/ebtables/libebt_nat.so
-66752 removed ebtables sbin/ebtables
-66704 removed ebtables lib/ebtables/libebt_arp.so
-66700 removed ebtables lib/ebtables/libebt_stp.so
-66700 removed ebtables lib/ebtables/libebt_among.so
-66684 removed ebtables lib/ebtables/libebt_ip.so
-66676 removed ebtables lib/ebtables/libebt_limit.so
-66656 removed ebtables lib/ebtables/libebt_log.so
-66648 removed ebtables lib/ebtables/libebt_mark.so
-66636 removed ebtables lib/ebtables/libebt_pkttype.so
-66604 removed ebtables lib/ebtables/libebt_vlan.so
-66588 removed ebtables lib/ebtables/libebt_ulog.so
-66588 removed ebtables lib/ebtables/libebt_nflog.so
-66584 removed ebtables lib/ebtables/libebt_arpreply.so
-66544 removed ebtables lib/ebtables/libebt_ip6.so
-66540 removed ebtables lib/ebtables/libebt_802_3.so
-66536 removed ebtables lib/ebtables/libebt_standard.so
-66524 removed ebtables lib/ebtables/libebt_mark_m.so
-66524 removed ebtables lib/ebtables/libebt_redirect.so
-66452 removed ebtables lib/ebtables/libebtable_filter.so
-66452 removed ebtables lib/ebtables/libebtable_broute.so
-66452 removed ebtables lib/ebtables/libebtable_nat.so
45 ebtables etc/ethertypes
66752 added ebtables usr/sbin/ebtablesd
66752 added ebtables usr/sbin/ebtables-legacy
66752 added ebtables usr/sbin/ebtablesu
200840 added ebtables usr/lib/libebtc.so.0.0.0
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
print_result is juggling with entry[x][y] which is not very readable.
While a better solution would be to use a class and reference named
attributes, that would require some bigger changes in the script.
Instead, make a minimal improvement by assigning the entry[x][y] values to
intermediate variables. Store them in a dict for easy usage from a format
string.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Build JavaScriptCore and WebCore as shared libraries to avoid a build
failure
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without opengl raised since bump to
version 5.212.0-alpha4 in commit
df0b0fe691:
CMake Error at Source/cmake/OptionsQt.cmake:592 (message):
Qt with OpenGL support is required for ENABLE_OPENGL
WebKit2 unconditionally depends on TextureMapperGL.h and tools builds
QtTestBrowser which unconditionally depends on QtOpenGL
Fixes:
- http://autobuild.buildroot.org/results/5604555279f99ba0221dd8d0baf9ab4d7cca3aed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version
5.212.0-alpha4 in commit df0b0fe691:
CMake Error at /home/fabrice/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/cmake/Qt5/Qt5Config.cmake:28 (find_package):
Could not find a package configuration file provided by "Qt5Widgets" with
any of the following names:
Qt5WidgetsConfig.cmake
qt5widgets-config.cmake
Add the installation prefix of "Qt5Widgets" to CMAKE_PREFIX_PATH or set
"Qt5Widgets_DIR" to a directory containing one of the above files. If
"Qt5Widgets" provides a separate development package or SDK, be sure it has
been installed.
Call Stack (most recent call first):
Source/cmake/OptionsQt.cmake:646 (find_package)
Source/cmake/WebKitCommon.cmake:51 (include)
CMakeLists.txt:137 (include)
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- drop 0001-LOGCXX-528.patch (from upstream [1])
- renumber remainnig patch
Changelog (for deteils see [2]):
- This is a minor bugfix release to fix issues found with 0.12.0. Notably,
this version fixes a bug where a multithreaded application would crash
when using a rolling file.
[LOGCXX-534] - Crashed in log->forcedLog function when running with multi-thread
[LOGCXX-528] - log4cxx fails to build on Centos 7.6 / g++ 4.8.5 / Boost 1.53
[1] 249dd85494
[2] https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.12.1
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- add patch 0002-boost-fallback-only-check-for-boost-if-really-needed.patch
to check for boost if really needed (in case of legacy c++ standard < c++17)
Fixes:
- http://autobuild.buildroot.net/results/8d49ab7cd9952f6a13bdd330e875012d0601f1d2
-- Found Boost: .../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include (found version "1.78.0") found components: thread chrono missing components: date_time atomic
CMake Error at .../build/log4cxx-0.12.0/boost-fallback-compile-tests/CMakeFiles/CMakeTmp/CMakeLists.txt:19 (add_executable):
Target "cmTC_aac37" links to target "Boost::date_time" but the target was
not found. Perhaps a find_package() call is missing for an IMPORTED
target, or an ALIAS target is missing?
CMake Error at .../build/log4cxx-0.12.0/boost-fallback-compile-tests/CMakeFiles/CMakeTmp/CMakeLists.txt:19 (add_executable):
Target "cmTC_aac37" links to target "Boost::atomic" but the target was not
found. Perhaps a find_package() call is missing for an IMPORTED target, or
an ALIAS target is missing?
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Package pistache is affected by binutils bug 27597 (Nios II), so let's
disable it when BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597=y. Let's also
indent the comment dependencies.
Fixes:
http://autobuild.buildroot.net/results/0e7b74c5a07ced2bbae1a0a8c7d7ba26dfa04031/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
apitrace uses very big switch statements, which causes the build to fail
on m68k, because the offsets there are only 16-bit.
We fix that by using -mlong-jump-table-offsets on m68k, to use 32-bit
offsets for switch statements. That flag is available on gcc version >= 7
but apitrace package already depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7, so
we can use it with no problem.
Fixes:
http://autobuild.buildroot.net/results/7306bf05962fec30fbe98b1eb8ee09b3162b8080/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit af67915161)
[Peter: drop Makefile/Vagrantfile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 323ae1e681)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsoup-gnome is not used by midori since bump to version 9.0 in commit
42f19d49fb and
0c2d8f0ea6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-boot libfdt fails to compile on CI.
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478208
As this fix has been already upstreamed just bump U-boot package.
Let's also bump Kernel and ATF as the board is properly supported upstream.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure with openipmi raised since commit
8f6b346a34:
/home/peko/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/libfreeipmi.a(libfreeipmi_la-ipmi-md5.o): in function `md5_init':
ipmi-md5.c:(.text+0xa7c): multiple definition of `md5_init'; ../lib/.libs/libipmitool.a(md5.o):md5.c:(.text+0xab0): first defined here
Fixes:
- http://autobuild.buildroot.org/results/01b22faf08a798ecc5d5465e1c0c13fa024f1096
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure with openssl raised since bump to
version 1.3.3 in commit 163509a8e0:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sh4-buildroot-linux-uclibc/10.3.0/../../../../sh4-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-3/output-1/host/sh4-buildroot-linux-uclibc/sysroot/usr/lib/libssl.a(rec_layer_d1.o): in function `DTLS_RECORD_LAYER_new':
rec_layer_d1.c:(.text+0x124): undefined reference to `CRYPTO_malloc'
Fixes:
- http://autobuild.buildroot.org/results/75ad8515916dfa056b17c97fdd95c7eb4d83a304
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
autoreconf is not needed since commit
dbf8047f64 as the official tarball already
ships a configure file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no --debug mode for cargo resulting in the following build
failure in ripgrep since its conversion to cargo infrastructure in
commit 342fd3e735:
error: Found argument '--debug' which wasn't expected, or isn't valid in this context
Fixes:
- http://autobuild.buildroot.org/results/772ebdd6a39950457a59419bdc1376cb0e0a3611
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch to fix linux bug:
```
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
```
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478164
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The internal_pcre option was dropped in:
9fbd7f3dc1
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
01764876e3 ("package/python-cryptography:
bump version to 36.0.1") incorrectly removed the build dependency on
openssl. This causes the following build failure:
build/temp.linux-x86_64-3.10/_openssl.c:575:10: fatal error: openssl/opensslv.h: No such file or directory
575 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
as OpenSSL is no longer guaranteed to be built before
python-cryptography (the Config.in file still had a "select
BR2_PACKAGE_OPENSSL" guaranteeing that OpenSSL would be built, but not
necessarily before).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Poke generate a library libpoke.so, so install it to staging.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From [1]:
"Even though the ordering has absolutely no consequences in Kconfig, it
is not logical (when reading). It is more logical and far easier to
understand when depends come first, followed by the selects."
Also, the Config.in example in the manual suggests to use this coding
style [2]."
Use the correct coding style in the chapter "Choosing depends on or select"
in the manual.
[1] http://lists.busybox.net/pipermail/buildroot/2015-October/142955.html
[2] https://nightly.buildroot.org/manual.html#_coding_style
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
