[Peter: use a single sed invocation]
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: use a single sed invocation]
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: use a single sed invocation]
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to the latest maxim.org.za kernel 2.6.38
Lock down headers version, otherwise we were building a toolchain with
3.7 headers for a 2.6.33 kernel - not too wise.
Also the AT91RM9200 is an ARM920T so enable that target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some systems, you don't want to run any getty, so allow the option
to be disabled when the empty string is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are three firmware files that can be installed, each for
different devices.
For example, the DIB0700 firmware can be used by quite a few DVB
USB sticks based on this chipset (I know of at least two of them).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reorganise the sub-menus for the linux-firmware package, so it is easier
to add new categories of firmwares to install (coming in a future patch).
Remove the per-chipco sub-menus, as all entries have the chipco name in
its prompt (except for TI, which is added).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have quite a few packages that are dedicated to providing firmwares
for miscellanous devices. Those package are spread out in the big
"Hradware handling" menu, so are a bit hard to find.
Move all those packages to their own sub-menu:
Package Selection for the target --->
Hardware handling --->
Firmwares --->
[ ] b43-firware
[ ] linux-firmware
[ ] ux500-firmware
Hopefully, this will make it nicer, when new firmware-providing packages
are added in the future (eg. in the pipe: firmware for the RPI GPU).
Fix a typo in the 'b43-firmware' prompt (missing 'm').
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* fix configure.in to take care of the given imlib2-prefix
* disable imlib2 support if imlib2 is not part of the selection
[Peter: imlib2 needs to be built with X support]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the root-password internal target to the exclusion list.
Fixes failures like:
Getting dependencies for [... 'target-root-passwd' ...]
Error getting dependencies [... 'target-root-passwd' ...]
Which is easily singled out with:
$ make target-root-passwd-show-depends
make[1]: *** No rule to make target `target-root-passwd-show-depends'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The directory was named xapp_xinput_calibrator, but the .mk file was
named xapp_xinput-calibrator.mk, which isn't consistent. Rename the
directory to xapp_xinput-calibrator to be consistent with the naming
of the .mk file and the other x11r7 directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "unknown" packages mechanism was used to render packages that did
not implement the make <pkg>-show-depends target, i.e the packages
that were not yet converted to one of the package infrastructures.
Since now all packages have been converted, we can remove this
"unknown" packages feature.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 9bc7b1d4ae, all X.org .mk files
are parsed unconditionally, even if BR2_PACKAGE_XORG7 is disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, graph-depends was calling "make <pkg>-show-depends"
individually for eack package, which was very slow. Now, it calls
"make <pkg1>-show-depends <pkg2>-show-depends ... <pkgN>-show-depends"
for all packages it knows, and then does that recursively. It reduces
the number of make invocations to the deepest dependency chain in the
current configuration, instead of having a number of make invocations
equal to the number of enabled packages.
For a configuration with xvkbd enabled (which brings a significant
number of X.org dependencies) and a tar root filesystem, the time to
execute graph-depends was:
real 5m14.944s
user 4m53.590s
sys 0m14.069s
After our optimizations, it is now:
real 0m33.096s
user 0m30.878s
sys 0m1.472s
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for more graph-depends improvements, use a
TARGET_EXCEPTIONS list to list all the targets that should be ignored
while building the dependency graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When doing a full graph of the dependencies, graph-depends starts by
doing a "make show-targets", which lists all the packages registered
in the $(TARGETS) variable. This variable contains all packages that
are enabled according to the .config file. Then, for each of those
packages, we used to create a "all" -> "package" dependency, even if
in fact most of some packages are already dependencies of other
packages. This creates a needlessly complex dependency graph.
This patch modifies graph-depends so that it filters out the unneeded
"all" -> "package" dependencies when "package" is already the
dependency of another package.
For example, if you have a configuration with libpng (which selects
zlib), "make show-targets" displays "libpng zlib", so graph-depends
used to create the following dependencies: (all -> libpng, all ->
zlib, libpng -> zlib). However, the (all -> zlib) dependency is not
really needed, as zlib is already the dependency of libpng. Those
dependencies are now filtered out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add it to the dependencies when it's available.
But disable crywrap when it's a nommu system since it uses fork()
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The pthreads autodetection poisons the linkpath thus making other
distribution libraries to take precedence over the cross ones.
Leading to failures such as:
http://autobuild.buildroot.net/results/tmp/3f979d4e2186ee31012c332fedec9591890b0b77
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch to generic V8 optimization for gcc since we dropped the explicit
supersparc one and works just the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the old Sun-specific variants used in old workstations (pre-1997)
and other useless ones.
The V7 ISA is a very old cpu only used in the first Sun workstations,
the toolchain support is broken: the cpu doesn't do hardware div and
it's not handled elsewhere.
The sparclite is also a very old Fujitsu cpu only used in early 90s Sun
machines (includes f930 & f934).
The sparclet (tsc701) was a microcontroller-variant.
The supersparc and hypersparc are just V8 variants also used in old Sun
workstations/servers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Status of the patches:
* valgrind-compiler-check.patch, no longer needed, merged upstream.
* valgrind-dont-include-a-out-header.patch, kept, just refreshed
* valgrind-fix-ccache-support.patch, adapted to the newer Valgrind
release.
* valgrind-largefile.patch, kept, just refreshed
* valgrind-more-ioctls.patch, removed. Most of it was merged
upstream. This patch was anyway a feature addition, so it shouldn't
be kept in Buildroot.
* valgrind-workaround-SIGSEGV-on-PPC.patch, kept as is, just
refreshed.
This bump also fixes the build failure we were experiencing with
Valgrind 3.7.0 against recent Glibc versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* add patch adding src/bin/lttng-sessiond/lttng-ust-error.h which is
missing in the lttng-tools-2.1.0 release tarball.
* update the sync_file_range patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also remove lttng-libust-uclibc-sed_getcpu.patch because it got merged
upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Builds just fine without it (probably stray include?)
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building with gnutls, libecore also needs libgcrypt.
Fixes:
http://autobuild.buildroot.org/results/4da454d6414cf8f4e638defae9b793fb46a0a072/build-end.log
While we're at it, also explicit the --enable-openssl /
--disable-openssl depending on whether openssl is available or not.
[Peter: only enable gnutls support when both gnutls and gcrypt are enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we're using the sources from the Mercurial repository, and Buildroot
does support retrieving from a Mercurial repository, there is no need
to try (and fail1) getting the archive from the Mercurial built-in
tarball mechanism.
(Note: I was beaten by this because I had a cached copy locally, left
after the previous tvheadend-vampirises-files-from-toher-packages attempt,
that I forgot to delete before testing. Ouch...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add overall description of LIBFOO_DEVICES and LIBFOO_PERMISSIONS.
Fix line numbers.
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
