Turns out that, with a little bit of tweaking, we can use
the autotools-package infrastructure to build QEMU.
That's better than defining all the _CMDS and using the
generic-package infra.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a bunch of important fixes since 1.2.1.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fix is needed for the 64bits build because Netatalk will assume the library
are stored in [..]/lib64/ instead of [..]/lib/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Such as
http://autobuild.buildroot.net/results/2ca1d135269a67201e6b4d995ce8fbe94db1ed3f
The mozilla build system passes all of the different ways of CFLAGS
(OPTIMIZER, XCFLAGS, OS_CFLAGS) even when building host tools
(nsintall).
The best way around this without patching libnss is just building the
host tools first without any CFLAGS and then going on with the rest.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The API generation script in mesa3d requires libxml2 to be built with
debug, because it uses the lsCountNode function which is only available
in debug mode.
Note that this is the second "temporary" hack to make mesa3d work.
See http://lists.busybox.net/pipermail/buildroot/2012-November/061936.html
for possible more fundamental solutions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package allows to download the Broadcom Wifi drivers, extract the
firmware from them, and install them in /lib/firmware, so that they
can be used by the open-source kernel driver b43.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
b43-fwcutter is an open-source tool (BSD-2c) that extracts the
firmwares from the Broadcom proprietary drivers. Those firmwares can
then be used by the open-source b43 and b43-legacy drivers of the
Linux kernel.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The sconeserver configure script uses Magick++-config to obtain compiler and
linker arguments for the imagemagick libraries. This doesn't work in
Buildroot, and causes build failures such as the following
http://autobuild.buildroot.net/results/7833edd60bbb2c291aea1efb5ccf407da7f4a51f/build-end.log
The upstream sconeserver code has been changed to use pkg-config directly,
instead of Magick++-config; this patch adapts the sconeserver package to
the upstream change.
Both this patch and the associated upstream change are based on a Buildroot
patch submitted by Samuel Martin: http://patchwork.ozlabs.org/patch/200901/
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
After discussion with Perl-Cross's author (Alex Suykov)
Note: Using -A with variables that aren't option lists makes little sense.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option is useful for cases where the terminal isn't a bare serial
vt100, but e.g. a linux tty with more features.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
WebKit 1.2.7 does not build with Bison 2.6, but Bison 2.6 is our
host-bison, so if the build machine has bison 2.6, or if by chance it
gets built before webkit, then the build fails with errors such as:
http://autobuild.buildroot.org/results/0b7cfbebd4388cabfa243b5ef74e3b6316fd9fd9/build-end.log
(the real error is not visible due to the overwhelming number of
warnings).
So, we add a patch that modifies WebKit to make it compatible with
Bison 2.6 (patch taken from upstream), and we also add 'host-bison' to
the WebKit dependencies, so that we are sure that a well-known version
of bison is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Building webkit with a recent gcc versions gives gazillions of
warnings such as 'warning: cast from 'WTF::AlignedBufferChar* {aka
char*}' to 'JSC::Identifier*' increases required alignment of target
type [-Wcast-align]'.
Those make the webkit build very noise, and hard to debug, so let's
silence those warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
util-linux-2.20.1-sscanf-no-ms-as.patch has a version in its name, and
therefore the other patch, unversioned,
util-linux-uclibc-build-fix.patch, never gets applied.
Fix this by renaming util-linux-2.20.1-sscanf-no-ms-as.patch to
util-linux-sscanf-no-ms-as.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Building host-python in parallel sometimes causes "Bus error" during
the installation step on our autobuilders, such as:
http://autobuild.buildroot.org/results/04bcc907c5e075fe1f39d4f49dcc50ec93708eb4/build-end.log
Extensive testing on one autobuilder has shown that building
host-python with MAKE1 work arounds this strange problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by Johan Sagaert in the mailing list, if it's building with
a uClibc toolchain with locale enabled the build fails since the new
gettext does a locale hack for glibc which isn't needed nor supported.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/5963d35b8933c452b8574c964e407c23a5d0412f
The microblaze toolchain has sys/inotify.h, but doesn't provide inotify_rm_*
functions, so disable inotify support.
Also disable the legacy dnotify support (which is used when inotify support
is disabled) as it has bitrotten upstream and no longer builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt configure option for specifying a custom qconfig.h
file changed from -config to -qconfig. This makes the
corresponding change in qt.mk.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump QEMU to 1.2.1.
Note: 1.3.0 is out now, but ./configure has changed a bit, and there are
new dependencies, so the bump to 1.3.0 is postponed for a litle while...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
'host-*' packages should depends on other 'host-*' packages,
not on target packages.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the upcoming introduction of qemu-on-target, we need to properly
separate the variables used for the host qemu, from the variables
used for the target qemu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Introduce a virtual 'jpeg' package, which pulls in either libjpeg or
jpeg-turbo depending on a choice selection.
Rename jpeg package to libjpeg so we can reuse 'jpeg' for the virtual
package, making the change transparent to existing users and all the
packages using libjpeg.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The uboot-tools.mk has a copy of BUSYBOX_UNINSTALL_TARGET_CMDS
in it, presumably due to a copy/paste error. This definition
is overriding the (identical) definition in busybox.mk.
Also, add license info.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to fix some other build problem of libhid, we'll need to do
modifications to the configure.ac. Therefore, let's first convert the
current patch on configure to a patch on configure.ac, and mark the
package as AUTORECONF=YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
