Note that both gdb 7.9 and 7.9.1 fail to build in a chroot without
texinfo, due to the infamous makeinfo issue. This should be fixed
separately.
[Peter: fixup white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for gcc 5.1 in Buildroot. In terms of gcc
patches, compared to gcc 4.9.x:
* Kept as is, sometimes after minor adjusments:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
850-libstdcxx-uclibc-c99.patch
860-cilk-wchar.patch
* Dropped:
110-pr64896.patch
111-pr65730.patch
* Split in multiple parts:
900-musl-support.patch
The patches from Crosstool-NG for muls support are used instead of
one single patch.
* Renamed:
910-gcc-poison-system-directories.patch to
200-gcc-poison-system-directories.patch
920-libgcc-remove-unistd-header.patch to
201-libgcc-remove-unistd-header.patch
Since the 9xx part of the series is now used by the various musl
related patches.
We have tested the following configurations, with a minimal Busybox
system:
* ARM, uClibc-ng
* ARM, glibc
* ARM, musl
* x86, uClibc-ng and uClibc 0.9.33.2
* x86, glibc
* x86, musl
All of the configurations built fine. All the configurations boot fine
in Qemu, except x86/uClibc (either ng or 0.9.33.2), it segfaults when
running init:
devtmpfs: mounted
Freeing unused kernel memory: 300K (c1389000 - c13d4000)
init[1]: segfault at 0 ip b77708c1 sp bfa9bb0c error 4 in ld-uClibc-0.9.33.2.so[b776c000+6000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
We'll give some time for the uClibc developers to fix the problem
before taking other measures in Buildroot to exclude gcc 5.1 from a
x86/uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps uClibc-ng to the latest version, and drops the two
patches that have been merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches are simply refreshed, except
004-sysconfigdata-install-location.patch where a minor conflict
resolution was needed.
[Peter: fixup .hash as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update most of the configs to the latest kernel version (4.1) except for
arm-nuri which is stuck.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some egl implementations needs special compiler flags or defines (E.G.
mesa3d for wayland needs to pass -DMESA_EGL_NO_X11_HEADERS to not try to
include X11 headers). This is correctly included in the .pc file, but the
configure logic doesn't use pkg-config so help it along.
Likewise, some implementations may need to link against other libraries, so
also pass LIBS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 83e29f2656 "gst1-plugins-bad: bump
version" (from 1.2.4 to 1.4.1) removed the configuration option for the
eglglessink plugin as a consequence of its removal in 1.3.1. However,
that commit did not add support for glimagesink, the plugin element to
be used as a replacement, which broke support for the EGL/GLES video
sink feature in Buildroot.
This new commit adds support for the OpenGL library and the
corresponding gl plugin, including the glimagesink element among others.
The plugin needs the library, but the library can also be used
separately in order to link custom plugins or applications against it.
The library needs at least one OpenGL API, one OpenGL platform and one
compatible window system. The implementations of these requirements that
Buildroot can currently provide are:
- APIs: OpenGL, OpenGL ES 2.X,
- platforms: GLX, EGL,
- window systems: X11, Wayland, Dispmanx.
The wayland configure feature switch is shared between the corresponding
OpenGL library window system and the waylandsink plugin.
This has been tested with videotestsrc/omxmpeg4videodec/omxh264dec and
glimagesink on the Raspberry Pi, using OpenGL ES 2.X, EGL and Dispmanx.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In ab71dff0 it was moved to SUBDIR, but this was never reflected for the
legal-info files, update this to fix:
http://autobuild.buildroot.net/results/836/8363943cc9c967713f585209408ea087a052a12d/
[Thomas: put OPENVMTOOLS_SUBDIR before OPENVMTOOLS_LICENSE_FILES, as
suggested by Yann.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mesa3d 10.6 adds optional support for SHA-1:
http://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?id=a24bdce46f95cbe9efd3b26f157d1eb36584861f
Adding "--without-sha1" will cause this failure during configure:
configure: error: Illegal value for --with-sha1: no
so I did not add the else-clause when no SHA-1 provider is enabled.
[Thomas: simplify else ifeq.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 23413b51b2 added --with-expat
configure option and expat dependency when BR2_PACKAGE_EXPAT is
configured. When cross-compiling, gdb configure fails because the host
system libexpat is referenced.
Configuring gdb with
--with-libexpat-prefix=$(STAGING_DIR)/usr
fixes the reference and allows gdb to build successfully.
Tested with arm-buildroot-linux-gnueabihf toolchain.
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
DirectFB provides two options for debug:
* --enable-debug-support (default is yes)
* --enable-debug (default is no)
The first one provides the functions to print debug information. These
functions can be called inside DirectFB, or by an external DirectFB
driver in another package.
The second one enables verbose mode in DirectFB, using these functions.
Buildroot currently provides an option for the second one only. The
first one - which is necessary for the second one - is always enabled,
because this is the default value.
The new option (BR2_PACKAGE_DIRECTFB_DEBUG_SUPPORT) makes it possible
to disable debugging support (--disable-debug-support) in order to
build the library with no debug feature at all.
When debugging support is disabled, the target installation path of
drivers (/usr/lib/directfb-<version>) is suffixed with -pure. The
public library (/usr/lib/libdirectfb.so) remains unchanged.
Some external DirectFB drivers will install into
/usr/lib/directfb-<version>-pure in release mode. For that reason, it
is important that DirectFB can be configured to use this directory.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The symlink created by buildroot for /bin/sh is the full path to
a shell. This does not match what busybox and other Linux
distributions do with using relative path symlinks. When handling
files on the host system this will point to the host system's shell
if present and not the target shell.
This is fixed by changing the /bin/sh symlink to use a relative path.
Fixes#8161.
[Thomas: minor fixups to the commit log suggested by Yann E. Morin.]
Signed-off-by: Matthew Starr <mstarr@hedonline.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump to version 0.2.6.9
- Update hash file
- Adapt patch to new version
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following commit explicitly configures optional dependencies based
off the respective package selections for a given configuration.
In addition, this commit also cleans up some obsolete/incorrect
arguments. With the introduction of (at least) Fluxbox 1.3.7, the
'--with-imlib2-prefix' argument no longer exists. The argument
'--with-xpm-prefix' has never existed; it was accidentally committed
mimicking the configuration used to provide imlib2.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GNURadio provides a set of processing blocks like analog or digital
communication, filters, ...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[build-tested only]
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-gettext is needed since
bad281a9f5 (diff-e2d5a00791bce9a01f99bc6fd613a39d)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove hash file as the project doesn't provide manual tarballs
on GitHub.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add new location as tmux moved to GitHub.
Remove the patch as it was already merged upstream.
Remove related AUTORECONF as well.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
