Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to Linux kernel 5.14.13 and u-boot 2021.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Try to be less smart (focused on the one target/one use-case),
instead reduce the rpi-firmware package to a selectable list
of (verbatim) installed firmware files.
- change rpi-firmware config handling from rpi-variant/rpi-flavour
choices to bootcode.bin, pi-default/-extended/-cut-down and
pi4-/default/-extended/-cut-down selection
- add BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE option to select installable
config.txt file
- remove config.txt modify code/handling from raspberry post-image.sh
script
- add different customized config.txt files to the raspberry board
section
- change dtoverlay krnbt from 'dtoverlay=miniuart-bt,krnbt=on' to extra line
with explanation comment
- change raspberry defconfigs to select appropiate rpi-firmware
and config.txt files
- change genimage-raspberrypi4.cfg/genimage-raspberrypi4-64.cfg to
use start4.elf and fixup4.dat
- update board/raspberrypi/readme.txt (add optional files fixup4.dat,
start4.elf and zImage)
With this changes a better support for custom use-cases should
be possible, specially multi-target SD cards as suggested by
Stefan Agner ([1]).
[1] http://lists.busybox.net/pipermail/buildroot/2021-February/303318.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: fix case of no config.txt provided]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We are going to remove the gcc fork for csky since it doesn't build
with the latest compilers (gcc 8, 10, 11 tested) [1].
Removing theses defconfigs and the csky gcc fork has become unavoidable
since the Buildroot Docker image used by the gitlab CI will switch soon
to Debian bullseye soon [2].
The cksy gcc fork based on gcc 6 has not been updated since it has been
added to Buildroot [3]. Since then, csky has been added to binutils and
gcc but using the latest upstream version (binutils 2.37 and gcc 11) is
not yet possible due to build issue with glibc 2.34 [4].
Moreover, qemu_csky defconfigs was to be used with the csky qemu fork
(based on Qemu 3.x) added by commit [5] and removed by commit [6].
Since then it's not possible to do a runtime test with theses
defconfigs.
Theses defconfigs can be added back later if the csky toolchain support
is fixed and csky supported by upstream Qemu.
[1] http://lists.busybox.net/pipermail/buildroot/2021-August/621504.html
[2] 71b8322712
[3] 7873a5bd5e
[4] http://lists.busybox.net/pipermail/buildroot/2021-October/624596.html
[5] f816e5b276
[6] 58af9a70cc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot CI has been failing due to 404 error on older U-Boot. Updating
the U-Boot version should fix it and it doesn't hurt to use the latest
U-Boot anyway.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Also bump linux headers version to 5.10.
Based on NXP 5.10.35-2.0.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update STM32F469-disco configuration files to operate with new kernel.
Result of make tinyconfig was taken as a starting point to fit kernel
into flash memory.
Current setup kernel + rootfs fits in 1.6MB on-chip flash memory
Fixes:
- Move kernel to new flash bank due to growth of dtb size
- Fix kernel start address in bootloader
- Remove outdated path which doesn't affect normal operation mode
For better binary size optimization gcc LTO is turned on.
Signed-off-by: Yauheni Saldatsenka <eugentoo@gmail.com>
[Arnout:
- squash 3 patches into 1;
- remove unused dts file;
- move linux/linux.config to linux-xip.config;
- add a sentence to readme to say SD card is not needed.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc 10.x is now used by default but the kernel 4.18.10 used by
pc_x86_64_{efi,bios}_defconfig doesn't build with it.
Bump the kernel to 4.19.204 release that contains a lot of
fixes for newer gcc.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1525741062https://gitlab.com/kubu93/buildroot/-/jobs/1525741060
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The beaglev kernel is based on the 5.13 branch, update
the expected linux-headers version to 5.13.
This has been wrong ever since the bump of the kernel version in commit
9a1bd7cc1c: the headers were bumped to
5.12 instead of 5.13.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1525740895
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to version 2021.07 and kernel to 5.10.55.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
AT91Bootstrap 3.10.2 has a bug in its Makefile:[1] it gives the
-nostartfiles flag to the ld command, although this is a gcc flag, not
an ld flag. The bug happens to be harmless when using binutils 2.35.
However, the ld shipped with binutils 2.36 is more strict in its option
parsing, and fails with the following error:
.../output/host/bin/arm-buildroot-linux-uclibcgnueabihf-ld:
Error: unable to disambiguate: -nostartfiles
(did you mean --nostartfiles ?)
The bug was fixed upstream in commit 3207586a.[2] However, since there
has been no tagged 3.x release since then, we just upgrade to the
current head of the branch at91bootstrap-3.x.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738145https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738152
[1] https://github.com/linux4sam/at91bootstrap/issues/127
[2] 3207586a79
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig is download at91bootstrap3 using a tarball, not over
git.
Fixes:
configs/microchip_sama5d2_icp_mmc_dev_defconfig:63:warning: override: BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL changes choice state
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig is download at91bootstrap3 using a tarball, not over
git.
Fixes:
configs/microchip_sama5d2_icp_mmc_defconfig:20:warning: override: BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL changes choice state
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig needs wchar, thread debugging, and udev support to be
able to use all the packages it enables.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738516
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently mx6cubox uses a custom boot.scr.txt script
and custom image generation scripts: genimage.cfg, post-build.sh
and post-image.sh.
Switch to using the more standard extlinux.conf solution
and remove the custom scripts in favor of the standard
board/freescale/common/imx/post-image.sh one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
a10_olinuxino is not switched to extlinux.conf, so the broken symlinks
are replaced by the previous content from a20_olinuxino.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
imx7d-sdb has been converted to use disto boot in U-Boot.
Add extlinux.conf support so that the board can boot correctly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2021.07 and kernel to 5.13 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently wandboard uses a custom boot.scr.txt script
and custom image generation scripts, genimage.cfg and
post-build.sh.
Switch to using the more standard extlinux.conf solution
and remove the custom scripts in favor of the standard
board/freescale/common/imx/post-image.sh one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch from the starfive-tech opensbi to upstream repo and use generic
platform now that it supports the console uart [1]. This landed after
the 0.9 release [2], so the current head of master branch is used [3].
FW_FDT_PATH is set to u-boot.dtb so that the device tree from U-Boot
will be included in the OpenSBI build [4]. Note that U-Boot must have
CONFIG_OF_SEPARATE enabled for U-Boot to build u-boot.dtb [5].
[1] e822b7504d
[2] 234ed8e427
[3] 79f9b4220f
[4] https://github.com/riscv/opensbi/blob/master/docs/firmware/fw.md
[5] https://github.com/u-boot/u-boot/blob/master/doc/README.fdt-control
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update commit ID of U-Boot to latest commit in starfive-tech repo [1]
which enables OF_SEPARATE [2].
[1] https://github.com/starfive-tech/u-boot/tree/Fedora_VIC_7100_2021.04
[2] 64ead5b839
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed to keep both stm32mp157c_dk1 and stm32mp157c_dk2
aligned.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running stm32mp1 watchdog is properly recognized and handled by kernel
watchdog framework since Linux v5.6.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2021.07 and kernel to version 5.13
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2021.07 and kernel to version 5.13
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running stm32mp1 watchdog is properly recognized and handled by kernel
watchdog framework since Linux v5.6. For details see the Linux commit
85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at
probe"). So U-Boot config fragment can be safely removed without
adding userspace watchdog daemon.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.12.2 and U-Boot to 2021.04.
Introduce minor cleanup: use SPL options instead of custom image options
for combined SPL image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux to 5.12.2 and U-Boot to 2021.04.
Introduce minor cleanup: use SPL options instead of custom image options
for combined SPL image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux to 5.12.2 and U-Boot to 2021.04.
Introduce minor cleanup: use SPL options instead of custom image
options for combined SPL image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the commit id for u-boot to include fixes from the starfive-tech
u-boot repository:
494e5ef7b807 jh7100: Enable full 2M L2 cache
4571f5a4e1e4 vic7100: enable cache ways (L2 cache)
abb06422a5cd Remove fdt_high and initrd_high for Starfive
93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER
bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)"
7b70e1d44ba9 defconfig: enable cache_wayenable for better performance
7c585978616b configs: earlycon=sbi is deprecated
The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive")
has removed the need for buildroot to patch the fdt_addr_r address.
Update linux from commit in the old 5.10 branch that Fedora image was
using to head of esmil_starlight branch [1] which is currently based
on 5.13-rc5 and represents the best kernel for this board [2]. This
commit was tagged as buildroot-20210609 because the branch gets rebased
regularly.
In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so
buildroot no longer needs to copy the dtb from u-boot.
[1] https://github.com/starfive-tech/linux/tree/esmil_starlight
[2] https://github.com/starfive-tech/linux/issues/26
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Arnout: add comment to refer to the tag in linux repo]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the chromebook elm configuration to use v5.10 which is an LTS.
With v5.10, none of the patches previously needed to enable the display
are needed anymore. Deleting them and making minor updates to the linux
kernel configuration.
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: drop "exit $?" in post-image.sh]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04
requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 04a0094f0e (configs/stm32f469_disco: fix kernel bootup) changed
the defconfig to build a vfat image, but forgot to add dosfstools/mtools
host utilities needed for this.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-11 warns about what appears to be an out-of-range array access but
stop the build due to -Werror added to cflags:
arch/sparc/kernel/mdesc.c: In function 'mdesc_node_by_name':
arch/sparc/kernel/mdesc.c:647:22: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
arch/sparc/kernel/mdesc.c: In function 'mdesc_get_property':
arch/sparc/kernel/mdesc.c:692:22: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
692 | if (!strcmp(names + ep->name_offset, name)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
arch/sparc/kernel/mdesc.c: In function 'mdesc_next_arc':
arch/sparc/kernel/mdesc.c:719:21: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
719 | if (strcmp(names + ep->name_offset, arc_type))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
cc1: all warnings being treated as errors
The issue was initially reported to gcc [1] where it was analized.
As suggested, change the struct mdesc_elem * accesses from the end
of mdesc to those from the beginning of the data array.
Update the prototype of node_block(), name_block() and data_block()
since the code really seems to want to do is to compute the address
somewhere into the chunk pointed to by hp.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100262
Upstream status: Pending
https://www.spinics.net/lists/sparclinux/msg26385.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As described by [1], the kernel generated by the configuration for the
STM32f469 Discovery board is buggy. Using a newer kernel, as suggested
by [1], increases the dtb and Kernel image size. In particular, the
5.12 version of the kernel generates a dtb and a kernel image whose sum
exceeds the 2 MByte of the flash module.
So I decided to replace the afboot-stm32 bootloader in the flash with
U-boot to easily boot the system from sdcard without having to worry
about the size of dtb, kernel and rootfs generated by the configuration.
This solution allows you to fix the kernel boot issue and makes it
possible to use its future versions.
[1] http://buildroot-busybox.2317881.n4.nabble.com/Bug-11746-New-stm32f469-didn-t-work-correctly-td219644.html
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Tested-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout:
- specify headers version explicitly, even though it's default;
- bump kernel to 5.12.11]
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1297337965
Commit 15a2f9b819 (package/{mesa3d, mesa3d-headers}: bump
version to 21.0.2) marked BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST as legacy,
but forgot to update the defconfig. The SW rasterizer isn't really needed
with the Intel GPU, so just drop it.
In addition, X11 now needs some help with loading the modules in the correct
order, similar to how it was done for the test in commit 4a3639bad0
(support/testing: test_glxinfo load X11 modules in the right order).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Release notes:
https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html#version-2-5
The existing qemu_aarch64_sbsa_defconfig was using an unpinned version
of ATF, so to avoid any regression, it is pinned to the previous
version, 2.4.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: pin ATF version in qemu_aarch64_sbsa_defconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The new branch "4.x" of at91bootstrap has dropped the contrib directory,
which holds the defconfigs used by the Acmesystems Acqua A5 boards. We
then cannot use the latest at91bootstrap anymore.
As commit e009816c67 introduced support
for at91bootstrap 4.x in the "next" branch, it had to work around this
by pinning these defconfigs to the "latest 3.x" version.
Avoid this and any future incompatibility problems by explicitly
requesting a tested version of at91bootstrap.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
[yann.morin.1998@free.fr: use a custom git, like other acme defconfigs]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8c3f281626 (configs/rpi: fix defconfigs after upstream rebased)
attempted to point the raspberrypi defconfigs to an existing commit in
the linux rpi repository.
However, in doing so, only a partial replacement was done: the version
string in the tarball filename was not replaced (missing 'g' to the sed
expression).
Fix that now.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add the new SAMA5D2 ICP (Industrial Connectivity Board)
with linux4sam_2020.10 components.
Update README file with new defconfigs.
https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The OMAP5432 uEVM[1] is a development board from Texas Instruments.
It is similar to the OMAP4 Panda boards, from which this configuration is
inspired.
[1]: https://svtronics.com/5432
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The project at https://github.com/linux4sam/at91bootstrap was until
now releasing 3.x versions, which were packaged using
boot/at91bootstrap3/ in Buildroot. Microchip has now started a new
branch of at91bootstrap, called 4.x, which will only support the
following devices: sam9x60, sama5d2, sama5d3, sama5d4, sama7g5. A
number of older devices from Microchip will only be supported by the
existing 3.x series.
Therefore, we cannot simply remove support for the 3.x series, and
allow using only the 4.x series.
So what this commit does is extend the boot/at91bootstrap3 package to
support building both 3.x and 4.x versions. In detail, this implies:
* Having the BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION symbol point to
the latest 4.x version. Indeed, we want
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION to really point to the
latest upstream version, even if that means potential breakage for
users. Users who want to use a fixed version of at91bootstrap
should anyway not be using
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION.
* Introduce BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION_3X for users who
would like to use the latest 3.x series.
* Adjust the installation logic, as images to install are now in
build/binaries/*.bin instead of binaries/*.bin. In order to not
have to differentiate 3.x and 4.x, we simply use $(wildcard ...) to
expand the list of files to install.
* To make it clear that boot/at91bootstrap3 supports both 3.x and
4.x, we also update the prompt of the package.
at911bootstrap does not carry a license file; so far we were using
main.c as the license file, as it carries the license blurb. Now that we
have a known alternate version, we would need a per-version hash for
that file. However, this is a bit too cumbersome to handle, so just drop
using main.c as the license file. When upstream introduces a proper
license file, we can revisit the situation.
Update the two defconfigs that were using the upstream 3.9.3 version;
all other defconfigs are using custom tarballs or custom git trees.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[Thomas: while this patch is based on previous work by Eugen, it was
reworked quite significantly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop main.c as license file, explain why
- update the two defconfigs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Branches in the Rappberry Pi linux repository are often rebased, which
means that commits that are not reachable from a reference (tag,branch)
will eventually get garbage-collected.
This is probably what hapenned with the commit we are curently
referencing in our defconfig files.
Swith to using the current HEAD of the rpi-5.10.y brnch, in lieue of the
previous one.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Bump kernel to version 5.10.30-ti-r3.
- Bump U-Boot to version 2021.04.
Add mdev to the beaglebone_defconfig. This gives us automatic USB support,
as the omap2plus kernel has most drivers as modules.
While at it, enable VFPv3 with 32 registers (instead of 16) and add a few
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for the Globalscale EspressoBin Ultra, which is
an evolution of the EspressoBin family. Same SoC and switchcore, more
Ethernet ports, including one PoE PD port.
Tested-by: Atallah Amine <amine_atallah@outlook.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This introduces a configuration for the SBSA reference machine under
QEMU that is intended for developing and testing firmware. It consists
of ATF that load EDK2 as BL33 which in turn will load GRUB2.
Included with the board files is a minimal kernel configuration, almost
identical to that of board/qemu/aarch64-virt/linux.config. The main
difference is the addition of ACPI which is preferred over DTB for
booting an UEFI system.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This host utility is useful to recover the bootloader.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now based on 5.10.33 (from 5.10.1).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump kernel to version 5.12.2.
- Bump U-Boot to version 2021.04.
While at it, switch U-Boot to the Kconfig build system and add some more
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump kernel to version 5.12.2.
- Bump U-Boot to version 2021.04.
While at it, enable VFPv3 with 32 registers (instead of 16) and add a few
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit extends the beaglev_defconfig and its documentation to
build the low-level firmware, and to explain how to reflash it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr: use typoed-name for beaglev-ddrlnit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit introduces support for the RISC-V based BeagleV platform,
which uses a Starfive JH7100.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr: use: eval $(make printvars)]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Bump kernel to version 5.11.16.
We remove the hardcoded ttyAMA0 and rely on the firmware to discover our
console. This enables serial console on systems, which do not have an Arm
pl011 UART.
We switch to GPT disklabel and discover our root filesystem using its
PARTLABEL. This enables booting from more media, such as HDD, SD card or
USB.
We update the readme, which hinted that ACPI was mandatory. This is not
strictly the case as we can also boot with a dtb and/or a U-Boot based
firmware, with no ACPI. While at it, mention EBBR, SystemReady and explain
how to build and use a U-Boot-based qemu firmware.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
NXP i.MX 8M Plus based SOM with 2GB of LPDDR4 and 16GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-plus-som/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To latest v2020.10 rev (e05b6d68)
-> added 8MP A1 silicon support
-> fixed 8MP HAB support
-> added display support for all 8M platforms
- Bump ATF to boundary-imx_5.4.70_2.3.0
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- based upon NXP 5.4.70_2.3.0 release
- include stable until 5.4.110
- 8MP GA support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y_1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y_1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y-1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y-1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux and headers version to 5.11
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Acqua A5 is a system on module based on the Microchip SAMA5D31 SoC:
https://www.acmesystems.it/acqua
It is available in both 256 MiB and 512 MiB versions, hence the two
defconfig files. These configs build microSD card images with:
- AT91Bootstrap 3
- Linux 5.4.107
- default buildroot packages (uClibc, Busybox)
The device tree blob comes from Acme Systems:
https://github.com/AcmeSystems/dts-archive
It is licensed under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable the OpenSSL library to enable some OP-TEE tests that relies on
it.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump TF-A to version 2.4.
- Bump u-boot to version 2021.01.
- Bump kernel to version 5.11.3.
We switch TF-A to a single FIP image. Thanks to this, TF-A does not need to
use semihosting to load the various BL* anymore (but U-Boot still does).
Update the readme.txt accordingly.
We switch to a u-boot image for the ramdisk. This removes the need to
update the fdt chosen node manually in the bootcmd.
While at it, we drop the generation of the kernel dtb, which we do not use.
In this config, we are indeed using the dtb generated on-the-fly by qemu
and amended by TF-A.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Board used custom Kernel but did not specify
custom headers. This broke the build when
Linux 5.11 was added in d2fe9c6.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1089053980
Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
commit 8efc5dce98 added an overlay but
forgot to add it to the related defconfig.
Fixes: missing overlay data in image
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds a 32-bit equivalent configuration of ppc64-e5500 board.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have defconfigs for quite a few friendlyarm boards, but the
naming for the defconfigs for those boards is inconsistent: some
start with 'friendlyarm_' while others don't.
Although the number of boards starting with 'friendlyarm_' is
less than those which do not, we still choose to rename the
boards so all have the 'friendlyarm_' prefix.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Chakra Divi <chakra@openedev.com>
Cc: Davide Viti <zinosat@gmail.com>
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the gitlab build:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1019385566/
HOSTCC scripts/extract-cert
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Very similar to the other stm32mp157-based boards, except that we use the
multi_v7 defconfig for ease of maintenance.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New U-Boot versions need Python 3.x for pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1006924823
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so get rid of
the hardcoded root=/dev/mmcblk1p2. The old vendor U-Boot unfortunately does
not have GPT support, so stick to MBR and use the legacy
root=PARTUUID=<disksignature>-<partition> format and set a fixed disk
signature, similar to how it was done for orangepi-r1 in commit 34cce93adb
(configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch that pins mmc indexes was not accepted to mainline kernel. Drop that
patch and switch to GPT to use partition labels. For GPT the name of the
partition in genimage.cfg is used as the label for that partition. Note
that the default GPT partition table location conflicts with the SPL
location, so move GPT table after bootloaders.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to use the official linux kernel v5.10 instead of an
out-of-tree kernel, and use the official U-Boot v2021.01 as the
bootloader. Provide two configuration files of genimage for different
boot flows:
- Boot from SD card (default)
- Boot from SPI flash
A boot script is generated to automatically boot the distro.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To match minnowboard_max_defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explicitly enable PCI support in the kernel after commit eb01d42a77785 (PCI:
consolidate PCI config entry in drivers/pci) and change to GPT partitions /
root=PARTLABEL to find the rootfs instead of hardcoding /dev/mmcblk2p2 as
the mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4).
This has the additional advantage that the same image will work when written
to a USB drive instead of a microsd.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc
driver has been switched to asynchronous probe. As a result, mmc indexes
can be shuffled breaking board boot. Add patch that pins mmc indexes to
their original ordered values.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 5.10.10 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 5.10.10 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for Sinovoip's Banana Pi
M1+. It is mostly based on bananapro_defconfig
but with appropriate device tree and minor tweaks:
- apply bananapi-m1-plus device tree in linux
- apply bananapi_m1_plus defconfig for uboot
- apply patch for OOB IRQs on new device tree
- update device tree name in boot.cmd, genimage.cfg
- update symlink for BRCM driver in rootfs_overlay
- overall clean-up of the config
Tested on BPI-M1+ V1_1.
Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The probing order of the two mmc controllers (sdcard and sdio wifi) has
changed in kernel 5.10 since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so change to
root=PARTUUID=.. instead of hardcoding /dev/mmcblkXp2.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: use feedc0de as magic]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
HDMI support is enabled by default in sunxi_defconfig since commit
c822a3ec17 (ARM: configs: sunxi: Add DRM output-related options), so drop
from fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for this board was removed in Linux upstream [1] since Xilinx
new design tools dropped these platforms in 2013, along with all
PPC405/PPC440 new designs. They are not maintained nor tested anymore.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7ade8495dcfd788a76e6877c9ea86f5207369ea4
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump most QEMU defconfigs (every one that was previously on 5.4.y)
to latest longterm kernel 5.10.7.
Please note the following exceptions/modifications:
- board/qemu/qemu_s390x_defconfig: ignored (already up to date)
- board/qemu/sh4*-r2d:
- Remove the remaining kernel patch [1] provided by Alan Modra
fixing rodata alignment, carried here by Romain Naour [2] to
fix an issue preventing kernel from booting with binutils 2.23.
Patch is present in upstream Linux now.
- Fix compile-time error regarding 64-bit time data structures
from kernel headers when building with uclibc. Previous fix [3]
existed upstream; but see details below.
- board/qemu/ppc-mpc8544ds: Updated kernel patch
- board/qemu/arm-versatile: Updated kernel patch
- board/qemu/mips*r6*: Updated kernel patch
Tested on all configs/qemu* configurations. [4]
[1] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html
[2] https://git.busybox.net/buildroot/commit/?id=a2331c8a61bdd71c47492efc818fb0458a349219
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fc94cf2092c7c1267fa2deb8388d624f50eba808
[4] https://gitlab.com/clumsyape/buildroot/-/pipelines/244024195
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.4.70_2.3.0 versions.
Build- and run-tested on:
o i.MX8QM MEK
o i.MX8QXP MEK rev B0
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.4.70_2.3.0 versions.
Note for configs/freescale_imx8mmevk:
On 5.4.70_2.3.0 the default "i.MX8MM LPDDR4 EVK RevB board" support is
removed and replaced by "i.MX8MM LPDDR4 EVK with QCA WIFI revB board".
In case an older revB board is used, then the following step in U-Boot is
needed:
=> setenv fdt_file imx8mm-evk-revb-qca-wifi.dtb
=> saveenv
=> reset
Build- and run-tested on:
o i.MX8MN DDR4 EVK
o i.MX8MQ EVK
Build-tested only for other configs.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[run-tested on i.MX6Q SabreSD, build-tested only for other configs]
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot and Linux kernel versions. Fix recent build failures caused
by mv-ddr-marvell package update. Marvell ATF does not provide a version
compatible with up-to-date mv-ddr-marvell. According to commit log,
Marvell developers are now contributing directly to upstream ATF. So
switch to upstream ATF instead of using older Marvell ATF versions.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/938922500
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hard-float support is pretty stable, so make that default for HSDK
boards.
The hard-float setting is a bit convulated since current ARC gcc lacks
--with-fpu - so this is done with BR2_TARGET_OPTIMIZATION
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr: split off into its own commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We are no longer actively working on uClibc, so make that default
for HSDK boards.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr: drop enabling hard float]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
No config changes done
| make snps_archs38_hsdk_defconfig
| make savedefconfig
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Integrate the RCW into the storage device image, so the image can also
be used a boot source. The SoC expects the RCW at offset 4096 of the SD
card or eMMC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable building of the bootloader and integrate it into the resulting
image.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump QEMU defconfigs to latest longterm kernel 5.4.88.
Please note that QEMU boards not based on 5.4.y were ignored:
- qemu_csky810_virt_defconfig
- qemu_csky807_virt_defconfig
- qemu_csky610_virt_defconfig
- qemu_csky860_virt_defconfig
Tests were carried out on all QEMU boards using Gitlab [1] (commit
message was slightly different, but the patch is identical)
Additional actions needed were:
- board/qemu/sh4-r2d: Remove one of the two kernel patches [2] provided
by Alan Modra fixing rodata alignment, carried here by Romain Naour [3]
to fix an issue preventing kernel from booting with binutils 2.23.
Patch is present in upstream Linux now.
[1] https://gitlab.com/clumsyape/buildroot/-/pipelines/239483891
[2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html
[3] https://git.busybox.net/buildroot/commit/?id=a2331c8a61bdd71c47492efc818fb0458a349219
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to upstream ATF of recent version to fix build with recently
updated mv-ddr. The vendor does not provide public access to newer ATF
versions anymore.
Bump U-Boot and kernel to fix dtc build on hosts with gcc 10.
Increase rootfs size. The default 60MB is not enough.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/948622614
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add the new SAM9X60 Evaluation Kit with linux4sam_2020.04
components. Update README file with new defconfigs.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Re-introduced rock64_defconfig which was dropped by commit
a5fa2469e6 ('Revert
"configs/rock64_defconfig: remove defconfig"').
Signed-off-by: Min Xu <xuminready@gmail.com>
Tested-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- U-Boot branch boundary-imx_v2020.10 from our repo
- Also bump ATF to boundary-imx_5.4.47_2.2.0 for i.MX8*
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Based upon NXP 5.4.47_2.2.0 release
- Integrated stable fixes up to 5.4.80
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build- and run-tested on i.MX8QM MEK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build- and run-tested on i.MX8MQ EVK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build- and run-tested on i.MX8MN DDR4 EVK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[run-tested on i.MX6Q SabreSD, build-tested only for other configs]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 5.10.1 (from 5.4.80).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit [1] added this option a second time.
Remove the first occurence.
Fixes:
configs/nitrogen6x_defconfig:31:warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
[1] 6ea9f662a0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use linux headers same as kernel (5.9 series).
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/917539050
Incorrect selection of kernel headers: expected 5.10.x, got 5.9.x
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
weston does not work on the ti-sgx SDK, so switch to using KMS directly,
and drop the wayland-related config options.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When tags was added by commit 011206b2bf
to detect the qemu command line, the qemu_arm_vexpress_tz_defconfig
was ignored due to a build issue.
This build issue has been fixed by previous patches, so we can
enable the runtime testing by adding the tag in the readme.txt
and the post-image script in the defconfig.
Since Qemu from HOST_DIR is now executed directly from BINARIES_DIR,
we can remove all the string before "qemu-system-*".
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump to the latest kernel v5.9.11 and require openssl.
- Switch to PSCI for bringing up the secondary CPUs.
- Switch to GICv3.
- Update the instruction in the readme.txt to use the latest FVP v8
Foundation Platform 11.12 build 38, and to start 4 cores in SMP.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.9.11 and U-Boot to 2020.10.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel version to 5.9.11.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since Qemu 5.1, this defconfig doesn't boot due to the to small SD card image size (60MB).
qemu-system-arm: sd_init failed: Invalid SD card size: 60 MiB
SD card size has to be a power of 2, e.g. 64 MiB.
You can resize disk images with 'qemu-img resize <imagefile> <new-size>'
(note that this will lose data if you make the image smaller than it currently is).
qemu-system-arm: sd_init failed
From [1]:
"While the possibility to use small SD card images has been seen as
a feature, it became a bug with CVE-2020-13253, where the guest is
able to do OOB read/write accesses past the image size end."
The qemu_arm_vexpress_tz_defconfig doesn't trigger such issue since
it doesn't use the same filesystem support (i.e doesn't use
-drive file=output/images/rootfs.ext2,if=sd,format=raw).
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/766482935
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu_arm_versatile doesn't use SD card interface but SCSI, so there is no
need to increase the image size.
The change was for qemu_arm_vexpress_defconfig instead (notice the
name of the defconfig used in gitlab).
This reverts commit cb62a8e0a2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/831421064
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/831421063
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421210
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421100
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.10 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421115
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildroot
This patch is based on Orangepi Zero Plus2 board support, so genimage
configuration and description is copy pasted. One difference is that
newer Linux and U-Boot are selected. Another difference is Ethernet
support (Plus) instead of WiFi (Plus2).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are about to bump the optee-test package to 3.11.0, which
requires C++ support, let's enable C++ support in the
qemu_arm_vexpress_tz_defconfig, which uses optee-test.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Broke since introduction of linux kernel series 5.9.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot 2020.10 no longer provides boot command in default environment for
Udoo Quad/Dual board. Boot script needs to be added to the image. In order
to keep using common infrastructure for freescale boards, move boot files
to root filesystem and add boot script there. Also switch Udoo Neo board
to common freescale infrastructure to simplify maintenance.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After BSP update Udoo Quad/Dual board once again hangs on boot. On a
new kernel disabling CONFIG_USB option is not enough to work around
the troublesome usb host on Udoo Quad/Dual board. So in order to be
future-proof it makes sense to disable usbh1 block in device tree
rather than fine-tune kernel configuration after BSP updates.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
On 5.4.24_2.1.0 the revC board is supported by default.
In case an older revB board is used, then the following step in U-Boot is
needed:
=> setenv fdt_file imx8mm-evk-revb.dtb
=> saveenv
=> reset
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the imx8 NXP kernel, it is preferred to use the imx_v8_defconfig
instead of the generic arm64 defconfig, as the NXP defconfig selects more
imx8 specific drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a fixed kernel version to have a reproducible and tested
configuration.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since kernel 5.7 is EOL now, this upgrades it to version 5.8.13.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit changes the stm32mp1 configurations to use the TF-A ->
U-Boot boot flow (called "trusted boot flow" by ST) instead of the
U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and
it's also the only one that allows to use the STM32 Cube Programmer
for reflashing devices.
As part of this, the genimage configuration file is now generated, as
it contains some file names that depend on the platform. Removing
partition-type from genimage.cfg is mandatory, since it would cause a
hybrid MBR partition table to be created, which itself would prevent
ATF from finding the ssbl parition.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
as the current kernel version used for this board is 5.7,
make sure that the host kernel version is the same to prevent
build failure due to version miss match.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/779210973
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
now, the build requires host-swig
which is given by BR2_TARGET_UBOOT_NEEDS_PYLIBFDT
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with linux kernel v5.9 all required configuration options are
available in the default config.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 2020.04 version, the enumeration of MMC has changed, so the boot
script must be updated
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the chromebook elm configuration to use v5.9 instead of an
intermediate release candidate.
At the latter stages of the v5.9 release, a patch was added which
broke the Chromebook Elm HDMI. Therefore add a revert patch to get rid
of this problem. The fix (and the revert) are already on the mailing
list (https://lkml.org/lkml/2020/10/10/32) and should become available
with v5.10
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.10 and kernel to version 5.8.13
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For defconfigs that create a boot envimage, add the host package
uboot-tools and update the script variable names.
Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing
BR2_TARGET_UBOOT_ENVIMAGE option. Note that for the defconfigs that are
not manually formatted (i.e. just the result of 'make savedefconfig'),
this puts them in the wrong place. However, it's easier this way, and
it's more consistent in general to have the definition of the envimage
close to BR2_TARGET_UBOOT itself.
Related to 78559d699a
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For defconfigs that create a boot script, add the host package
uboot-tools and update the script variable names.
Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing
BR2_TARGET_UBOOT_BOOT_SCRIPT option. Note that for the defconfigs that
are not manually formatted (i.e. just the result of 'make
savedefconfig'), this puts them in the wrong place. However, it's easier
this way, and it's more consistent in general to have the definition of
the script close to BR2_TARGET_UBOOT itself.
Special cases:
- nanopi_* had the definition of the _SCRIPT variable in a weird place.
These are moved to close to BR2_TARGET_UBOOT.
- Same for orangepi_plus.
- orangpi_pc_* already had BR2_PACKAGE_HOST_UBOOT_TOOLS=y so it's not
added there.
Related to db2b684126
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since Qemu 5.1, this defconfig doesn't boot due to the to small SD card image size (60MB).
qemu-system-arm: sd_init failed: Invalid SD card size: 60 MiB
SD card size has to be a power of 2, e.g. 64 MiB.
You can resize disk images with 'qemu-img resize <imagefile> <new-size>'
(note that this will lose data if you make the image smaller than it currently is).
qemu-system-arm: sd_init failed
From [1]:
"While the possibility to use small SD card images has been seen as
a feature, it became a bug with CVE-2020-13253, where the guest is
able to do OOB read/write accesses past the image size end."
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/766482935
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[yann.morin.1998@free.fr:
- don't force network range
- don't forward TCP port
- drop post-build script to add tty1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds supports for building buildroot kernel + rootfs
for MT8173 Elm board, also known as Chromebook Elm
(https://www.acer.com/ac/en/US/content/series/acerchromebookr13).
Though Chrome-OS is officially supproted on this board, the
mainline kernel works as well (benchmarks + conformance), and so
the 5.9 kernel is used. As the 5.9 kernel isn't yet released, we
use the 5.9-rc5 for now, which will be up-revd to 5.9 once its
released.
Using the mainline kernel means that we have to apply certain patches
to get the HDMI screen working. These patches are lying in the
"drm-misc-next" list and will make it to the kernel after 5.9. At that
time, we will remove the patches and point Buildroot to use the latest
kernel (hopefully, 5.10).
This commit also adds an ITS file (for creating FIT images), an ARGS
file (for providing kernel args) and a "sign.sh" script to generate
signed kernel images. Though the "sign.sh" is very similar to the
coresponding file under board/chromebook/snow, it cannot be shared
between both boards, as the script requires access to the board
specific its / args file.
Additionally a readme & defconfig is added to help the user get started.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The same script is going to be used by the Chromebook Elm to generate
a bootable SD / USB image. Therefore, move the script out of the snow
folder to one level above (board/chromebook/snow -> board/chromebook).
Update the chromebook_snow_defconfig to reflect the new location of
the script.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.07 version and kernel to 5.4.63.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 5.4.61 (from 5.4.51)
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for imx8mqevk_defconfig that allows booting a mainline
kernel.
This defconfig still relies on NXP ATF and U-Boot, but in the long term
the plan is to switch to mainline ATF and U-Boot as well.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Analog audio is enabled by default in sunxi_defconfig since commit 5d2408c6
(ARM: configs: sunxi: Add sun8i analog codec), so drop from fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Brings a number of fixes and audio support. The aarch64 defconfig has
grown, so bump the ext4 size to make it fit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that upstream supports this board add buildroot support for it,
too.
This supports:
- latest upstream linux kernel. Since the support for this board and
its SoC is still in active development, we want to follow the
upstream kernel releases for now.
- building an image which can be installed to eMMC, SD card or USB
thumb drive.
- upstream u-boot patches are pending, therefore no support for
building a bootloader for now.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit [1] in U-Boot upstrea, there is no necessity to pass extra
metadata_csum option due to changed env location in U-Boot so we can
drop it completely.
[1] 76db1681da52342ca9f4fb7e6787bd83cc82f429:
stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr: 76db1681d referecnes a U-Boot commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The custom UBoot version was not correctly specified, causing the latest
one to be selected instead:
/home/ymorin/dev/buildroot/buildroot/configs/odroidc2_defconfig:25:warning:
symbol value '"2020.07"' invalid for BR2_TARGET_UBOOT_CUSTOM_VERSION
Fixes:
https://gitlab.com/ymorin/buildroot/-/jobs/723411844
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that RISC-V 32-bit (RV32) support has been merged into mainline
glibc, we can use the Linux 5.4 kernel.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The apu2 by PC Engines is a 64 bit single board computer with coreboot
BIOS. It only has serial output, but no graphics chip. With its 2–4
ethernet ports, it is often used to build a firewall or router.
The provided defconfig configures busybox and isolinux. It will output
a hybrid ISO image that can be written to a USB stick or burned to a
CD.
Configuration based on a blogpost by Tony Arkles:
http://www.better-bsp.com/blog/2017/03/02/buildrooting-for-apu2/
Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the friendlyarm nanopc-t4 was added in
c23895f06e, but then removed
in 8efd4463f7 because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- updated readme
- GPT partition layout is being used
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
A defconfig for the friendlyarm nanopi-m4 was added in
493c3979a4, but then removed
in a24bd8936f because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
A defconfig for the rockpro64 was added in
59e1077b4e, but then removed
in 10f49213b7 because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- renamed defconfig from pine64_rockpro64 to rockpro64
- updated readme
- using a GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
Mainline Linux now has basic s500/roseapplepi support, so switch to that to
get rid of the dependency on gcc7. Add two patches for the dts / fix that
didn't make it for kernel 5.7.
The mainline kernel does not yet have support for the mmc interface, so
change to initramfs for now. Patches for mmc support have been posted
recently, so this can be reverted once they show up in a stable kernel:
https://lore.kernel.org/lkml/cover.1593124368.git.cristian.ciocaltea@gmail.com/
The owl serial port is called ttyOWLn in mainline, so adjust the bootargs to
match. Also drop the unneeded execute permission on uEnv.txt.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3288 SOM based radxa rockpi-n8
target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
commit: "ba120841bf40ebaed049d64bb4f980083a1cf6b7"
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
commit: "5dcb0132685b07beb82065c5d7521e6c555c55b6"
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump configs/qemu_* to latest longterm kernel 5.4.42.
All defconfig using a specific kernel version (csky, risc32) are not
taken into account.
Build and runtime tested: https://gitlab.com/jugurthaB/buildroot/-/pipelines/177882458
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674933582
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Oleksandr G Zhadan <Oleks@ArcturusNetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The vendor kernel we are currently selecting no longer builds,
and fails with a ton of:
from include/linux/list.h:8,
from include/linux/module.h:9,
from arch/mips/jz4740/prom.c:16:
include/linux/log2.h:22:1: error: ignoring attribute 'noreturn' because it conflicts with attribute 'const' [-Werror=a
ttributes]
22 | int ____ilog2_NaN(void);
| ^~~
We can't afford to fix that, so let's just move to upstream
kernel and bootloader. It doesn't make much sense to keep
using an unsupported kernel and bootloader at this point.
This means we will be missing some of the features supported
by the vendor (such as HDMI support), but it is what it is.
Linux v5.7 and v5.4 have been tested to boot fine, the latter
is picked for the defconfig as it is an LTS version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674933782
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to a later version of ATF and cleanup the Python
configuration. Previously this configuration had to work around Python
3 issues with OP-TEE. Now this relies on OP-TEE properly building
itself with host-python3.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bluez-utils has been removed, so use bluez5-utils instead for the
microchip_sama5d27-wlsom1_ek_mmc_dev configuration, to avoid a build
failure due to legacy options being selected.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674934030
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel to version 5.7.10 and U-Boot to 2020.07
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.7.10 and U-Boot to 2020.07
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_TARGET_UBOOT_NEEDS_PYTHON3 is already selected for
this defconfig, BR2_TARGET_UBOOT_NEEDS_PYTHON and
BR2_TARGET_UBOOT_NEEDS_PYTHON3 can't be selected at the
same time.
Reported by check-dotconfig.py.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/657885314
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_TARGET_UBOOT_NEEDS_PYTHON3 is already selected for
this defconfig, BR2_TARGET_UBOOT_NEEDS_PYTHON and
BR2_TARGET_UBOOT_NEEDS_PYTHON3 can't be selected at the
same time.
Reported by check-dotconfig.py.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/657885313
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the
Allwinner H2+ SoC.
It is similar to the other Banana Pi M2* boards, from which this
configuration is inspired.
[1]: http://www.banana-pi.org/m2z.html
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Basic support for the Marvell ESPRESSObin, by Globalscale Technologies.
http://espressobin.net
The kernel config has been extended with a fragment to enable switchcore
support, DSA drivers, and VLAN filtering in the bridge. To make use of
this you need a custom libnl based application, or the iproute2 suite
rather than the brctl tools, which don't support the VLAN filtering.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- based on NXP imx_5.4.24_2.1.0 release
- includes latest stable releases, hence 5.4.x naming
- includes support for all Boundary Devices platforms + accessories
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for imx6ullevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.07 and kernel to version 5.7.8
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2
components. Update README file with new defconfigs and new
packages/website.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399 based rockpi-4 targets (model A, B, C)
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.4.46
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399PRO SOM based rockpi-n10 target
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.7.2
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DDR FW along with all other FW code that need to be used in
bootloader or installed on target are related to the firmware-imx
package.
This patch does this job as well as fixing the conjugation of NEED*s*
in the symbol name. Also take advantage of this patch to make the DDR
FW dependant on BR2_PACKAGE_FIRMWARE_IMX.
In addition, the BR2_PACKAGE_FIRMWARE_DDRFW_* option was incorrect, as
there is no package matching this name. So we rename them to
BR2_PACKAGE_FIRMWARE_IMX_*, and add the appropriate Config.in.legacy
handling.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And rebase uboot patch.
Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
[Maeva: Tested on i.MX6Quad SabreAuto CPU1]
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 53ced1f6d3 ("linux: allow the selection of the architecture's
default configuration") allows us to specify the Linux defconfig
cleanly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The OpenSBI platform 'qemu/virt' has been removed in v0.8. Builds for
the QEMU 'virt' machine can use the 'generic' platform instead.
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 5.0.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The machine has a NAND flash device and firmware capable of loading the
OS from a JFFS2 file system on it. Enable creation of JFFS2 image that
can be written to said flash device.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Orange Pi Zero defconfig has been updated to use U-Boot 2020.04 by
commit 9e2bfccf4d (configs/orangepi_zero: bump kernel and uboot
versions). Since then it requires Python 3.x on the host.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/593313572
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now based on 4.19.126 (from 4.19.113).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel to version 5.7.1 and U-Boot to 2020.04
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.7.1 and U-Boot to 2020.04
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.6 and uboot to version 2020.04 for
orangepi-zero configuration
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the i.MX8M Nano EVK Board [1].
The final boot image is created from uboot and firmware binaries in post
image script board/freescale/common/imx/imx8-bootloader-prepare.sh
Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel
configuration needs host-openssl to build.
[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to 2020.04 and kernel to 5.4.42 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit:
- bump Linux & U-Boot to linux4sam-2020.04
- bump at91bootstrap to v3.9.2
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.04 and kernel to version 5.6.3
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is now forcefully selected by
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS when the kernel is in
charge of building DTBs (BR2_LINUX_KERNEL_DTS_SUPPORT=y). So enabling
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is no longer needed in the 64-bit
defconfigs for Raspberry Pi 3 and 4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, nanopi_neo4 does not need pylibfdt or pyelftools, but only a
host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, roc_pc_rk3399 does not need pylibfdt or pyelftools, but only
a host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>