configs/acmesystems_acqua_a5: new defconfigs
The Acqua A5 is a system on module based on the Microchip SAMA5D31 SoC:
https://www.acmesystems.it/acqua
It is available in both 256 MiB and 512 MiB versions, hence the two
defconfig files. These configs build microSD card images with:
- AT91Bootstrap 3
- Linux 5.4.107
- default buildroot packages (uClibc, Busybox)
The device tree blob comes from Acme Systems:
https://github.com/AcmeSystems/dts-archive
It is licensed under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is contained in:
Edgar Bonet
Thomas Petazzoni
parent
4e520b8b97
commit
52bb779ff5
@ -688,6 +688,11 @@ F: package/unscd/
|
||||
N: Dushara Jayasinghe <nidujay@gmail.com>
|
||||
F: package/prosody/
|
||||
|
||||
N: Edgar Bonet <bonet@grenoble.cnrs.fr>
|
||||
F: board/acmesystems/acqua-a5/
|
||||
F: configs/acmesystems_acqua_a5_256mb_defconfig
|
||||
F: configs/acmesystems_acqua_a5_512mb_defconfig
|
||||
|
||||
N: Eloi Bail <eloi.bail@savoirfairelinux.com>
|
||||
F: package/bayer2rgb-neon/
|
||||
F: package/gstreamer1/gst1-plugins-bayer2rgb-neon/
|
||||
|
||||
301
board/acmesystems/acqua-a5/at91-sama5d3_acqua.dts
Normal file
301
board/acmesystems/acqua-a5/at91-sama5d3_acqua.dts
Normal file
@ -0,0 +1,301 @@
|
||||
/*
|
||||
* acme-acqua.dts - Device Tree file for Acqua A5 Board
|
||||
*
|
||||
* Copyright (C) 2014 Atmel,
|
||||
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
|
||||
*
|
||||
* 2020 Sergio Tanzilli <tanzilli@acmesystems.it>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "sama5d31.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Acme Systems Acqua SOM";
|
||||
compatible = "acme,acqua", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait consoleblank=0";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x10000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
hlcdc: hlcdc@f0030000 {
|
||||
status = "disabled";
|
||||
hlcdc-display-controller {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888_alt>;
|
||||
port@0 {
|
||||
hlcdc_panel_output: endpoint@0 {
|
||||
remote-endpoint = <&panel_input>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* MicroSD mounted on the SOM */
|
||||
|
||||
mmc0: mmc@f0000000 {
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Optional MicroSD to mount on the carrier board */
|
||||
|
||||
mmc1: mmc@f8000000 {
|
||||
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
|
||||
status = "disabled";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
spi0: spi@f0004000 {
|
||||
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can0: can@f000c000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
tcb0: timer@f0010000 {
|
||||
timer0: timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer1: timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@f0014000 {
|
||||
pinctrl-0 = <&pinctrl_i2c0_pu>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@f0018000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
|
||||
|
||||
status = "okay";
|
||||
phy-mode = "rmii";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
nvmem-cells = <ð0_addr>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
phy0: ethernet-phy@1 {
|
||||
interrupt-parent = <&pioE>;
|
||||
interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
/*ethernet-phy@1 {
|
||||
reg = <0x1>;
|
||||
};*/
|
||||
};
|
||||
|
||||
/* Bit banging internal I2C to manage the AT24MAC402 chip */
|
||||
|
||||
i2c3@ {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&pioE 1 0 /* SDA */
|
||||
&pioE 2 0 /* SCK */
|
||||
>;
|
||||
i2c-gpio,delay-us = <4>; /* ~178 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* EEPROM contains the eth0 MAC address */
|
||||
|
||||
eeprom@58 {
|
||||
compatible = "atmel,24mac402";
|
||||
pagesize = <256>;
|
||||
read-only;
|
||||
reg = <0x58>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eth0_addr: eth-mac-addr@9A {
|
||||
reg = <0x0 0x06>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pwm0: pwm@f002c000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart0: serial@f001c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart1: serial@f0020000 {
|
||||
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: serial@f0024000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
spi1: spi@f8008000 {
|
||||
cs-gpios = <&pioC 25 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc0: adc@f8018000 {
|
||||
atmel,adc-vref = <3300>;
|
||||
atmel,adc-channels-used = <0xfe>;
|
||||
pinctrl-0 = <
|
||||
&pinctrl_adc0_adtrg
|
||||
&pinctrl_adc0_ad1
|
||||
&pinctrl_adc0_ad2
|
||||
&pinctrl_adc0_ad3
|
||||
&pinctrl_adc0_ad4
|
||||
&pinctrl_adc0_ad5
|
||||
&pinctrl_adc0_ad6
|
||||
&pinctrl_adc0_ad7
|
||||
>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@f801c000 {
|
||||
dmas = <0>, <0>; /* Do not use DMA for i2c2 */
|
||||
pinctrl-0 = <&pinctrl_i2c2_pu>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
dbgu: serial@ffffee00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fffff200 {
|
||||
board {
|
||||
pinctrl_i2c0_pu: i2c0_pu {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
|
||||
<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2_pu: i2c2_pu {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
|
||||
<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
pinctrl_key_gpio: key_gpio_0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_mmc0_cd: mmc0_cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_mmc1_cd: mmc1_cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb0: gadget@500000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: ohci@600000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: ehci@700000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
|
||||
panel: panel {
|
||||
/* compatible = "acme,43inch", "simple-panel"; */
|
||||
compatible = "acme,50inch", "simple-panel";
|
||||
/* compatible = "acme,70inch", "simple-panel"; */
|
||||
|
||||
status = "disable";
|
||||
|
||||
port@0 {
|
||||
panel_input: endpoint@0 {
|
||||
remote-endpoint = <&hlcdc_panel_output>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0 {
|
||||
label = "led0";
|
||||
gpios = <&pioE 3 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "led1";
|
||||
gpios = <&pioE 4 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "led2";
|
||||
gpios = <&pioE 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "led3";
|
||||
gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
28
board/acmesystems/acqua-a5/genimage.cfg
Normal file
28
board/acmesystems/acqua-a5/genimage.cfg
Normal file
@ -0,0 +1,28 @@
|
||||
# Minimal SD card image for the Acme Systems Acqua A5
|
||||
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"boot.bin",
|
||||
"zImage",
|
||||
"at91-sama5d3_acqua.dtb"
|
||||
}
|
||||
}
|
||||
size = 16M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
44
board/acmesystems/acqua-a5/readme.txt
Normal file
44
board/acmesystems/acqua-a5/readme.txt
Normal file
@ -0,0 +1,44 @@
|
||||
Acme Systems Acqua A5
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
The Acqua A5 is a system on module based on the Microchip SAMA5D31 SoC:
|
||||
|
||||
https://www.acmesystems.it/acqua
|
||||
|
||||
The files here support configurations that build a microSD image for a
|
||||
minimal system that can be accessed through the serial console. You will
|
||||
need an USB-to-serial interface in order to access that console from
|
||||
your computer:
|
||||
|
||||
https://www.acmesystems.it/DPI
|
||||
|
||||
How to build the image
|
||||
======================
|
||||
|
||||
If you have an Acqua module with 256 MiB of RAM, type:
|
||||
|
||||
$ make acmesystems_acqua_a5_256mb_defconfig
|
||||
|
||||
If you have the 512 MiB version, type instead:
|
||||
|
||||
$ make acmesystems_acqua_a5_512mb_defconfig
|
||||
|
||||
You can optionally tweak the configuration and add packages by typing:
|
||||
|
||||
$ make menuconfig
|
||||
|
||||
Then, proceed with the build:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the microSD card
|
||||
=============================
|
||||
|
||||
The system image is the file "sdcard.img" in the "output/images"
|
||||
directory. Write it to the card by invoking:
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M
|
||||
|
||||
where `sdX' is the block device representing the microSD card.
|
||||
22
configs/acmesystems_acqua_a5_256mb_defconfig
Normal file
22
configs/acmesystems_acqua_a5_256mb_defconfig
Normal file
@ -0,0 +1,22 @@
|
||||
BR2_arm=y
|
||||
BR2_cortex_a5=y
|
||||
BR2_ARM_ENABLE_VFP=y
|
||||
BR2_ARM_INSTRUCTIONS_THUMB2=y
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
|
||||
BR2_SYSTEM_DHCP="eth0"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/acqua-a5/genimage.cfg"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.107"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="sama5"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/acmesystems/acqua-a5/at91-sama5d3_acqua.dts"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_TARGET_AT91BOOTSTRAP3=y
|
||||
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="acqua-256m"
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
22
configs/acmesystems_acqua_a5_512mb_defconfig
Normal file
22
configs/acmesystems_acqua_a5_512mb_defconfig
Normal file
@ -0,0 +1,22 @@
|
||||
BR2_arm=y
|
||||
BR2_cortex_a5=y
|
||||
BR2_ARM_ENABLE_VFP=y
|
||||
BR2_ARM_INSTRUCTIONS_THUMB2=y
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
|
||||
BR2_SYSTEM_DHCP="eth0"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/acqua-a5/genimage.cfg"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.107"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="sama5"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/acmesystems/acqua-a5/at91-sama5d3_acqua.dts"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_TARGET_AT91BOOTSTRAP3=y
|
||||
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="acqua-512m"
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
Loading…
Reference in New Issue
Block a user