Support for MIPS IV was dropped in commit
dd45fe0efb ("arch/mips: remove
deprecated mips1/2/3/4 support"). However, even though it is an older
ISA than R1, it is still useful to support older MIPS-based
systems (e.g.: Cobalt Qube).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version makes it explicit that it uses libxdiff, a library which is
not maintained upstream since 2008. It now have numerous forks, none of
them sticking out. For now, use the one which is bundled in the libgit2
sources.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- update to latest git version
- switch to https url for better access for users behind a proxy
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for m68k with MMU in musl was added in 2018 with
commit f81e44a0d96c88e052e51982f9fdd6fe0a212b46.
Tested with qemu_m68k_q800_defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See the release notes for Squid 6 for any news:
http://www.squid-cache.org/Versions/v6/RELEASENOTES.html
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer versions of Google's Material Design icon package are structured
differently, making a version bump no so trivial. While work can be done
to support this, considering this package is using v2.2.3 and the most
recent version is v4.0, it is most likely that this package is not being
used. Environments which desire Material icons/fonts/etc. will most
likely achieve better results be managing their own custom package to
have an explicit selection/filter of design styles (e.g. standard,
Android, etc.), variants (basic, outlined, rounds, etc.), display
resolutions and scale selection desired.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot icicle kit configuration uses the Hart Software
Service's (HSS) payload generator tool. This tool creates a formatted
payload image for the HSS zero-stage bootloader on PolarFire SoC,
given a configuration file and a set of ELF binaries. The
configuration file is used to map the ELF binaries or binary blobs to
the individual application harts (U54s). Add the HSS payload generator
as a host package to support this.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Christian Stewart <christian@aperture.us>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch cleans up the shellcheck issues in the versal post scripts.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 134900401f (support/scripts/fix-rpath: parallelize patching
files) broke the rpath fixup, because it improperly quoted or expanded
variables:
- $@ was expanded in the main() context, rather than in the sub-bash
as expected, propagating incorrect parameters to patch_file();
- an array was passed without array expansion, so only the first item
was passed; that was in turn assigned to a string, anyway loosign
the array. Liuckily, we only ever put a single item in that array,
so that worked by chance.
We fix that by inverting the parameters to patch_elf(), where the extra
args are passed last, so we can put as many we want in the future. We
also pass every variables as positional parameters outside the bash -c
command, which allows us proper quoting of all variables, specifically
of the extra args array which now comes last.
The ultralong line was split, too, in a hopefully easier-to-read form.
Fixing all that also required fixing the many shellcheck issues at the
same time (wome were pre-existing before 134900401f).
While at it, expand two TABs into spaces like the rest of the script.
Note: shellcheck does not seem to warn when a variable expansion will be
used as the command to run, i.e. ${PATCHELF} does not trigger the
quoting error. Still, for consistency, we also double-quote it (we know
it is a single word, as it is already double-quoted once in the script).
Fixes: 134900401f
Cc: Victor Dumas <dumasv.dev@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4cf79d9b71 (pkg-cmake: add option to select the Ninja
generator) forgot to account for the late expansion rule in the inner
infrastructure macros, which breaks the build in two ways:
1. the expansion of $(firstword $$(MAKE)) does not actually expands to
the first word, but to the full value of $(MAKE);
2. the paths are invalid for per-package directories.
Fix that by applying the proper double-dollar rule for inner macros.
Reported-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
distutils will be dropped with python 3.12.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
distutils will be dropped with python 3.12.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
distutils will be dropped with python 3.12.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
distutils will be dropped with python 3.12.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Using "xargs" instead of "while read" loop allows for the patching of
files to be parallelized. This significantly reduces the amount of
time it takes to fix all the paths. On a larger RFS(~300MB) this
script was taking 5 minutes, it now only takes about 30s on a 12 core
machine.
Signed-off-by: Victor Dumas <dumasv.dev@gmail.com>
[Thomas: take into account the suggestion of Quentin Schulz to pass
PARALLEL_JOBS through the environment down to the fix-rpath script]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the i.MX8DXL SoC from NXP, by adding a
new BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL and propagate its
support in the affected packages.
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The COPYING and EULA files have changed, with the following main
changes:
- update to copyright years
- switch from ASCCI double quotes to fancy Unicode ones ("" -> “”)
- reflow the license text
- identify new third-parties and their conditions
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The COPYING and EULA files have changed, with various changes, mainly:
- update to copyright years
- switch from ASCCI double quotes to fancy Unicode ones ("" -> “”)
- reflow the license text
- identify new third-parties and their conditions
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Both the COPYING and EULA files have changed, with the following main
changes:
- update to copyright years (2022 -> 2023)
- switch from ASCCI double quotes to fancy Unicode ones ("" -> “”)
- reflow the license text
- identify new third-parties and their conditions
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
