Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The m68k Linux kernel build is broken with binutils >= 2.41 with:
arch/m68k/fpsp040/skeleton.S: Assembler messages:
arch/m68k/fpsp040/skeleton.S:502: Error: junk at end of line, first unrecognized character is `#'
arch/m68k/fpsp040/skeleton.S:508: Error: junk at end of line, first unrecognized character is `#'
This commit adds a backport from the upstream Linux kernel which fixes
this issue. Many thanks to Romain Naour for the issue investigation
and the identification of the kernel commit fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- improve 8ULP support (rev A1)
- add mmc user fastboot support
- add fastboot partconf support
- add nitrogen8mp smarc support
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- ATF v2.8 (including mainline buildroot patches)
- PMUFW xilinx_v2023.1
- Updated pm_cfg_obj.c from Vitis v2023.1
- Removed kria u-boot patch which is included with xilinx-v2023.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot 2022.05 use binutils 2.37 by default, but the binutils
version was downgraded to the previous binutils version in qemu_ppc64*
defconfigs due to a bug in binutils 2.37 [1].
Later when binutils 2.36 has been removed the binutils version has
been updated to 2.38 (even though it was already the default version
selected by Buildroot at that time) [2].
Since then, several binutils release has been added and the binutils
version 2.38 has been removed recently [3].
Since the initial bug is gone with the removal of binutils 2.37,
we can safely remove the binutils version from qemu_ppc64 defconfigs.
[1] 1e2fe860f3
[2] e461c9adc8
[3] 1391c99d62
Fixes:
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/4798047373
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel is built without network support, so network utils are useless.
This has a positive impact on the size of busybox and xipImage, making
them smaller.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiegineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 11 [1] the sparc architecture is disabled since
it produce a non working image. Buildroot now provide gcc
13.x, 12.x and 11.x and we are going to remove gcc 10
that was the last working release (thanks to a local patch).
First remove qemu_sparc_ss10_defconfig since it will no longer
be possible to build it with the internal toolchain backend.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The u-boot.stm32 image is now created by binman tool, so the
BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be
disabled, but pylibfdt is now needed.
Tested on stm32mp157f_dk2.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported in commit [1] of the U-Boot project, the config.mk file has
been suppressed in order to use binman to manage FIT
generation. Therefore, the "u-boot.stm32" make target should no longer
be used with recent versions of U-Boot.
The configuration option added by this comit allows the creation of
the u-boot.stm32 image for both recent versions of U-Boot, which use
binman, and older versions.
Legacy handling would have suggested that this new option should
"default y" to preserve existing behavior, but as moving forward all
U-Boot new versions will no longer need this u-boot.stm32 target, it
probably makes sense here to not comply with this backward
compatibility rule, as an exception.
[1] 5564b4cd4d5c69 ("stm32mp: add binman support for STM32MP15x")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: David Reaver <me@davidreaver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build the am335x-bonegreen-wireless.dtb device tree.
The genimage script which is shared between beaglebone and
beaglebone_qt5 was updated to support the bonegreen-wireless.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Regression builds failed to build uboot due to missing OpenSSL
library.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes uboot build errors:
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
|
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With upstream commit ae2d9506a36c ("riscv: sifive: Rename fu540 board to unleashed")
in U-Boot v2021.07 release, the defconfig for SiFive Unleashed board
has been changed to sifive_unleashed_defconfig.
Also newer U-Boot has deprecated the usage of SPL_FIT_GENERATOR
to generate u-boot.itb hence there is no 'u-boot.itb' target in
the U-Boot Makefile anymore. Instead binman is used to assemble
the u-boot.itb image.
We will need to switch to BR2_TARGET_UBOOT_FORMAT_CUSTOM for
installing u-boot.itb.
Switch over to use the latest U-Boot v2023.04 release.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the rest of RISC-V boards have been switched to use OpenSBI
1.2, let's update hifive_unleashed to use OpenSBI 1.2 too.
Resolves: https://bugs.busybox.net/show_bug.cgi?id=15658
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following
build error:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default kernel configuration for s390x enable a lot of
drivers by default so increase the image site to 120M.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4364600444
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ppc-mpc8544ds is the only qemu configuration that requires a kernel patch:
board/qemu/ppc-mpc8544ds/patches/linux/0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch
But this patch doesn't apply after a backport between v6.1.20 and v6.1.21
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da0beae2449376326086e9f57468fd2b64736d2a
So the patch 0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch doesn't
seem required anymore.
Welcome to Buildroot
buildroot login: root
# uname -a
Linux buildroot 6.1.28 #1 Wed May 24 09:08:27 UTC 2023 ppc GNU/Linux
# cat /proc/cpuinfo
processor : 0
cpu : e500v2
clock : 400.000000MHz
revision : 3.0 (pvr 8021 0030)
bogomips : 800.00
timebase : 400000000
platform : MPC8544 DS
model : MPC8544DS
Memory : 128 MB
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4306895282https://bugs.busybox.net/show_bug.cgi?id=15581
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Cc: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynq_zed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_microzed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline Linux kernel 5.15.108
- mainline U-Boot 2023.04
- default packages from buildroot
Note: There is a problem in u-boot display management. It should display
the ST microelectronics logo but "noise" is displayed (like when running
the command dd if=/dev/urandom of=/dev/fb0 in Linux). I also tried to
change version (even the first version in which this feature was
introduced), but without success. Despite this I decided not to disable
the video management configuration to remind us that it needs to be
fixed :).
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Link: https://www.st.com/en/evaluation-tools/32f769idiscovery.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kernel is built without network support. It is useless to compile the
package and then remove it from rootfs.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The versal vc1902 on the vck190 evaluation board has an ARM Cortex A72 core.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package optee-benchmark is no more maintained by OP-TEE community
hence don't enable that package in qemu_arm_vexpress_tz_defconfig.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi PC Plus requires host OpenSSL.
Build error is masked only because Linux kernel is built
before U-Boot for this specific image configuration were
wireless driver is enabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi Zero requires host OpenSSL.
Build error is masked only because Linux kernel is built
before U-Boot for this specific image configuration were
wireless driver is enabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi One now requires host OpenSSL. Select
BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build error:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4187707115
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After booting Linux the userspace is unusable since every command issued,
that is a symlink to busybox, fails because of no free ram. So let's
disable IIO in linux.config to give some more ram to userspace.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux kernel to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux kernel to 6.1.14, U-Boot to 2023.01, ATF to 2.8.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Let's use a more modern kernel with a broader range of hardware support
for PCs.
We stick to 6.1, rather than 6.2, as the former is an LTS, whicle the
latter is not.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04 and remove the patch that has already
been upstreamed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The version of U-Boot must be explicitly set because if you keep the
default setting, the bootloader is continuously updated in buildroot with
the risk of building a non-working image.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump U-Boot to version 2023.04.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux Kernel 6.1 now being officially promoted to be a LTS, this
commit bump the kernel version of this defconfig to 6.1.14.
A Kernel config fragment "linux.fragment" is now needed as the kernel
no longer enable SBI v0.1 support and the earlycon RISC-V SBI in its
riscv arch defconfig. See [1] [2].
The Spike riscv-isa-sim was updated upstream accordingly [3].
In order to keep a smooth transition, this kernel config fragment
re-enable those options to make sure this kernel will work with
both old Spike versions (not including commit [3] like the v1.1.0
currently included in Buildroot), and newer versions. This commit
was also successfully tested with riscv-isa-sim at commit
0d1a48c0c0.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f562570b9c5d6a3e30d87aec60a9d8f22a3203c
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3938d5a2f9369d1ebd56320629fed395ce327e9c
[3] 191634d285
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.1.13 and increase the rootfs size accordingly.
- Bump the FVP in the readme to version 11.20 build 15 and update the
command line.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and rename config fragment to make it
clearer that it is not a complete config file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and follow CONFIG_SYS_TEXT_BASE renaming.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's also enable BR2_TARGET_UBOOT_NEEDS_OPENSSL required by uboot to
build correctly.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's also reorder BR2_UBOOT_ options by moving
BR2_TARGET_UBOOT_FORMAT_DTB_IMX after BR2_TARGET_UBOOT_NEEDS_OPENSSL since
this reflects the order in boot/uboot/Config.in file.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The size of xipImage has grown by 84KB but there are still 278KB left
before running out of 2MB of flash memory.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During the last U-boot version bump it's not been noted that the TPL
was not prepended to SPL anymore preventing the board to boot, so
let's copy TPL to the image folder, prepend it to u-boot-spl-dtb.bin
and place it at offset 32KB, where RK3288 bootrom expects to find
it. Let's also place u-boot-dtb separated from SPL at offset 8M, where
the SPL expects it to find it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate versal-firmware package from nealfrager github to Xilinx github.
The images are identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 2021.10 only distro booting is supported, as
reported by commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only").
The patch allows to update U-Boot to versions later than 2021.10.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous version failed to boot from sd card with a log reported by
the document [1]. In my case it always failed, a 100% failure against
75% reported by the document.
Instead of adding the patch to fix the problem, I preferred to update
the kernel version.
Tested on beaglebone black.
[1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux 6.1.9 installs more modules and this makes rootfs size to increase
and the default 60M size is not enough. So let's expand rootfs size to
120M.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build a 32b ARMv7-A U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the BeagleBone Green Wireless to the
existing beaglebone_defconfig, by making sure the relevant Device Tree
is built and installed.
Signed-off-by: Ramon Crichlow <rcrichlow9000@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
provide input and output interfaces to a dedicated carrier board. It is
designed mainly to provide graphical/video and connectivity interfaces
to the appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
The smm s2 board is basically the same as the pro except it boots from
NAND instead of eMMC.
Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The updated device tree is provided by Acme Systems:
https://www.acmesystems.it/compile_kernel_5_15
It is released under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate zcu106_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate zcu102_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate kv260_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.
Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.
While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
