The upstream QEMU 'sifive_u' machine supports running upstream U-Boot
for the SiFive HiFive Unleashed board out of the box.
Add the QEMU instructions for testing in readme.txt.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As the rootfs size is set to 60M, let's put it right on the 4M offset
in the SD card, so that the generated sdcard.img can be exactly
64M. This will allow sdcard.img to be accepted as an image by Qemu,
which requires power of two sizes for the disk images.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A new version of Bootlin toolchains, 2023.08, has been recently
released. Besides the usual updates of GCC, binutils, GDB, kernel
headers, and C libraries, support for AArch64 BE with musl has been
enabled, which explains why there are two new toolchains and two new
test cases.
All test cases where successfully tested:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/957304450/builds
Note that the sparcv8 uClibc toolchains are considered obsolete. They
are still available, but at some point we'll have to drop them from the
choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We now have 3 different options to select an image as the BL33 stage
of TF-A: Barebox, U-Boot or EDK2. Technically speaking, they are
mutually exclusive: they all specify a BL33= variable to the TF-A
build, and TF-A can only support a single BL33 stage.
However, as pointed out by Vincent Fazio in [0] there is nothing that
prevents selecting Barebox, U-Boot and EDK2 together, even though it
doesn't make sense.
To address this, this commit introduces a choice...endchoice block,
into which the Barebox, U-Boot and EDK2 options are moved. An
additional "none" option is added, which is the default, and
corresponds to not having any BL33 image.
Since we keep the same name for the options, no legacy handling is
necessary.
[0] https://lore.kernel.org/buildroot/PH1P110MB1603A4AA1638838DA56BAA069FDA9@PH1P110MB1603.NAMP110.PROD.OUTLOOK.COM/
Reported-by: Vincent Fazio <vfazio@xes-inc.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Casey Reeves <casey@xogium.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The issue seems to be fixed. I checked qemu and linux git repositories
but can not find any information when this is starting to work.
System gets successfully an IP, no further testing was done.
Tested with Qemu 8.0.3 and Linux 6.1.x.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0003-libxfs-stop-overriding-MAP_SYNC-in-publicly-exported.patch is upstreamed.
See here for changes to the previous version:
https://fossies.org/linux/xfsprogs/doc/CHANGES
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a followup of the discussion at:
https://lists.buildroot.org/pipermail/buildroot/2023-July/671639.html
It provides an example of a runtime tests using standard Linux graphic
components (Kernel, DRM, Mesa3D, weston).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- use an overlay rather than create config file at runtime
- sleep in python not in target
- increase delay to capture DRI CRCs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
commit "package/weston: fix the configuration of simple-clients"
fixed the configuration of Weston simple-clients by always enabling all
supported applications.
Since it is not desirable to always have all those applications
installed on target, this commit introduces a new package Kconfig
option to control this.
Since there is already a BR2_PACKAGE_WESTON_DEMO_CLIENTS option present,
this commit also update the Kconfig "help" entries, to clarify the
difference between those "demo clients" and "simple clients". Those
clients groups are directly coming from the upstream package (and are
directly mapped to Meson configure options).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- set -Dsimple-clients= only once, outside conditional block
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
commit 7329a0db44
"weston: disable v4l simple dmabuf for headers < 3.8"
disabled dmabuf-v4l-client when kernel headers are older than v3.8.
This commit was made at the time the weston package was at version
1.10.0, using the autotools package infra.
commit e672eb5c39
"package/weston: bump to version 8.0.0"
replaced the package infra to meson (since upstream deprecated
autotools). This commit changed a disable of dmabuf-v4l-client in
autotools, by enabling it only if supported. The end result is that
the current meson package recipe disable ALL simple clients, or just
enable dmabuf-v4l-client when supported. In all cases, all other
weston simple clients are disabled. This behavior is not convenient
since some of those simple clients are useful to test the correct
operation of Weston and the rest of the graphic stack.
This commit fixes this issue by enabling all supported simple clients.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 21d5d592a4 (package/fft_eval: new package) got last-minute
changes when comitted, changes which no longer made use of the
FFT_EVAL_TARGETS variable, but forgot to drop assignments to that
variable.
Drop them now.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit "f6fe8932df pkg-generic: add checks on deprecated variables
FOO_BAR_OPT" introduced checks for deprecated variables, and warns the
user to use _INSTALL_HOST_OPTS instead of _INSTALL_HOST_OPT.
Commit "6a25cec33d package/pkg-cmake.mk: rename _INSTALL_HOST_OPTS ->
_INSTALL_OPTS" removed the usage of _INSTALL_HOST_OPTS but didn't add a
check for the deprecated variable.
Add a warning to change _INSTALL_HOST_OPTS to _INSTALL_OPTS.
And change the warning for _INSTALL_HOST_OPT to also suggest
_INSTALL_OPTS.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add useful tool for bridging RAUC with the Hawkbit API.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The note above the erlang version instructs to refer to another note
further down the file. However, even if it is not too difficult to find,
it is still located a bit too far away, and the reference is not very
explicit what note we should look at.
When we introduced that variable in 6c1d128844 (package/erlang: export
EI_VSN so other packages can use it), the rationale for hard-coding it
was "to avoid spawning a shell every time the variable is dereferenced".
However, that can get a bit confusing and hard to follow. Also, that in
fact spawns a shell only once for each rebar-packages, so the overhead
is far from being too high.
The EI_VSN is only used by rebar-package packages, is derefrenced from
the rebar-infra and not the packages themselves, and is not needed by
erlang itself (it knows its own EI_VSN), so we can de-hard-code it, and
rely on build-time detection, by looking in the appropriate file.
We have two files where we could look:
- lib/erl_interface/vsn.mk in the erlang source tree, but it is not
installed,
- .../lib/erlang/releases/$(ERLANG_RELASE)/installed_application_versions
as installed by erlang.
We use the second one, as it is cleaner, for a package, to look into
installed files, rather than to look in the source tree of another
package.
Although both the host and target erlang are the same, we still look
into the corresponding file to extract the version. This is so that it
would be easier if in the future we ever manage to rely on a
system-installed erlang that could have a EI_VSN different from the
target one.
We can't re-use the variable ERLANG_EI_VSN, because it now needs to be
$(call)-ed with a parameter. Hopefully, external packages that use it
directly rather than through the rebar infra, are not legion...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Will Newton <will.newton@gmail.com>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update linux-3.14.config for Galileo to enable Linux kernel root
file system on NFS.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for MIPS IV was dropped in commit
dd45fe0efb ("arch/mips: remove
deprecated mips1/2/3/4 support"). However, even though it is an older
ISA than R1, it is still useful to support older MIPS-based
systems (e.g.: Cobalt Qube).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version makes it explicit that it uses libxdiff, a library which is
not maintained upstream since 2008. It now have numerous forks, none of
them sticking out. For now, use the one which is bundled in the libgit2
sources.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- update to latest git version
- switch to https url for better access for users behind a proxy
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for m68k with MMU in musl was added in 2018 with
commit f81e44a0d96c88e052e51982f9fdd6fe0a212b46.
Tested with qemu_m68k_q800_defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See the release notes for Squid 6 for any news:
http://www.squid-cache.org/Versions/v6/RELEASENOTES.html
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer versions of Google's Material Design icon package are structured
differently, making a version bump no so trivial. While work can be done
to support this, considering this package is using v2.2.3 and the most
recent version is v4.0, it is most likely that this package is not being
used. Environments which desire Material icons/fonts/etc. will most
likely achieve better results be managing their own custom package to
have an explicit selection/filter of design styles (e.g. standard,
Android, etc.), variants (basic, outlined, rounds, etc.), display
resolutions and scale selection desired.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot icicle kit configuration uses the Hart Software
Service's (HSS) payload generator tool. This tool creates a formatted
payload image for the HSS zero-stage bootloader on PolarFire SoC,
given a configuration file and a set of ELF binaries. The
configuration file is used to map the ELF binaries or binary blobs to
the individual application harts (U54s). Add the HSS payload generator
as a host package to support this.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Christian Stewart <christian@aperture.us>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch cleans up the shellcheck issues in the versal post scripts.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
