This option was needed to build versions of GDB < 10.x. As we just
dropped support for GDB 9.x, this logic can now be removed.
The special case to configure just gdbserver was only valid for gdb<10,
but was guarded by !GDB_TOPLEVEL (which was equivalent to gdb<10).
GDB_TOPLEVEL is now always true, so we can't hit that special case
anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: add little blurb about gdbserver]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that GDB 12.x has been added, and GDB 9.x removed, we can make GDB
11.x the default version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The handling of the GMP dependency needs a bit of change. Until now,
the GMP dependency was needed when building full GDB (host or target)
in version 11.x or 12.x, so we were explicitly checking whether those
versions were enabled.
Now that only GDB 10.x and the ARC-specific version of GDB are the
only remaining ones not needing GMP, we invert the logic: only those
two versions do not trigger the addition of the GMP dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update hash for license file to account for an update in the (C) years.
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
[yann.morin.1998@free.fr: update the license hash]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7ff21f8d4b (package/binutils: handle gprofng as an optional
feature) introduced the typo. Although it was noticed, the commit was
not amended before being pushed...
Fix that now...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It includes an option to build a command line program that can be used
to replace git in simple cases.
The upcoming sha256 repository support made them steal the sha256 code
from RFC6234, hence the license change.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgit2 is currently a library without any reverse dependencies so the
missing atomic symbols do not cause build failures yet.
libgit2 uses the atomics intrinsics on gcc >= 4.7 and the sync
intrinsics on previous gcc versions. Since gcc 4.9 is the new
minimum, ignore the sync intrinsics requirements.
The next version of libgit2 will also build a binary, which will
expose the problem.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new releases mostly contain bug fixes. The build system has been
prepared to use AppArmor library, but since actual support is still
missing it is not worth yet to enable build infrastructure in
Buildroot.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
binutils 2.39 added support for gprofng, a new profiler (see
https://www.phoronix.com/news/GNU-Profiler-gprofng).
This new profiler is enabled by default, but it requires bison on the
host.
In order to handle this, this commit:
- Adds a new option BR2_BINUTILS_GPROFNG, which allows to
enable/disable gprofng in host-binutils
- Unconditionnally disables gprofng for the target binutils, based on
the idea that in a Buildroot context the analysis of profiling data
is generally done on the host system. This can of course always be
revisited later by adding a new option to the target binutils
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 736c4c1655:
Makefile:575: *** mysql is in the dependency chain of freeradius-server that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
Fixes:
- http://autobuild.buildroot.org/results/c3a9c3822b4599c1b16d27840b5663506e37a41f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass LDFLAGS to avoid the following musl static build failure raised
since the addition of the package in commit
814911aecb:
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/sh4eb-buildroot-linux-musl/11.3.0/../../../../sh4eb-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/sh4eb-buildroot-linux-musl/11.3.0/libgcc.a(unwind-dw2.o): in function `size_of_encoded_value':
/home/autobuild/autobuild/instance-5/output-1/build/host-gcc-final-11.3.0/build/sh4eb-buildroot-linux-musl/libgcc/../../../libgcc/unwind-pe.h:89: undefined reference to `abort'
Fixes:
- http://autobuild.buildroot.org/results/bf041723ed813746c61892262630a3ac2bc43b14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without threads raised since bump to
version 0.6.0 in commit 017dbc770c and
4a4331f2f2:
CMake Error at /home/giuliobenetti/autobuild/run/instance-1/output-1/build/glog-0.6.0/CMakeFiles/CMakeTmp/CMakeLists.txt:18 (add_executable):
Target "cmTC_ed950" links to target "Threads::Threads" but the target was
not found. Perhaps a find_package() call is missing for an IMPORTED
target, or an ALIAS target is missing?
Fixes:
- http://autobuild.buildroot.org/results/bf0846a51da69169286c7af38089d204d3d242d1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
luajit supports aarch64_be since commit
28e5c2f2bd
However this raise a build failure with ljsyscall because aarch64_be
directory does not exist so use arm64 instead
/usr/bin/install: cannot stat '/home/buildroot/autobuild/instance-1/output-1/build/ljsyscall-0.12/syscall/linux/aarch64_be/*.lua': No such file or directory
Fixes:
- http://autobuild.buildroot.org/results/78397c83e84dbfc09990f92be93e0b8a10d014c5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel version for all riscv nommu configs from 5.18 to 5.19.
That way, we can remove the one and only riscv nommu patch,
since this patch is included in kernel 5.19.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This series fixes a fatal error at link time on m68k, xtensa,
and riscv64, caused by a bad upstream elf2flt commit.
Without this patch, m68k, xtensa, and riscv64 would result in
a fatal error:
ERROR: text=0x3bab8 overlaps data=0x33f60 ?
With this patch, qemu_m68k_mcf5208_defconfig,
qemu_riscv64_nommu_virt_defconfig, and
qemu_xtensa_lx60_nommu_defconfig builds properly.
riscv64 and m68k boots to login prompt.
xtensa crashes when loading init, the same behavior as when
reverting the bad upstream elf2flt commit completely.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove broken elf2flt patch:
package/elf2flt/0003-elf2flt-fix-.eh_frame-section-handling.patch
The patch modifies main(), but does not perform a similar change in
output_relocs(), which might cause sectionp in output_relocs() to be
initialized with an invalid address, causing random memory to be
overwritten.
This leads to a segfault when linking e.g. busybox for m68k.
We cannot perform a similar change in output_relocs(), since at this
point in time, data_len will always be non-zero.
Revert this patch completely, so that we can add a working patch.
Note that even with this patch reverted, elf2flt is still broken
on archs like m68k and xtensa, resulting in the fatal error:
ERROR: text=0x3bab8 overlaps data=0x33f60 ?
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From the release notes:
================================================================================
Redis 7.0.4 Released Monday Jul 18 12:00:00 IST 2022
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2022-31144) A specially crafted XAUTOCLAIM command on a stream
key in a specific state may result with heap overflow, and potentially
remote code execution. The problem affects Redis versions 7.0.0 or newer.
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New version contains updated binaries which are part of the NXP
5.15.5-1.0.0 Yocto release.
Update the license hashes for formatting changes and addition of
LC3plus/T2/Bluetooth SIG licenses.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
[Peter: add SCR.txt license file as suggested by Stefan Hager]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to run the full gamut of "perf tests" installing the perf
scripts is required, otherwise we run into errors similar to those:
failed to open shell test directory: /usr/libexec/perf-core/tests/shell
Make this possible by introducing a new option allowing us to install
perf scripts.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
nfs-utils 2.6.2 adds nfsrahead tool to set readahead through sysfs, but
this tool is mandatory and requires libmount that in order requires
libblkid. Also we need a local patch that is already pending upstream to
avoid failing static linking:
https://patchwork.kernel.org/project/linux-nfs/patch/20220809223308.1421081-1-giulio.benetti@benettiengineering.com/
So let's select:
- BR2_PACKAGE_UTIL_LINUX_LIBMOUNT
- BR2_PACKAGE_UTIL_LINUX_LIBBLKID
and add the pending patch for fixing static linking failure due to wrong
order of libraries in linker list(-lblkid must follow -lmount). This is
achieved by using pkg-config that is already a dependency of this package.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since weston 10.0.0, md5 and sha1 hashes are not published
with the release announce email.
The values were probably calculated locally, so remove them
since upstream provide stronger hashes.
Fixes:
f67a6e9b7a
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
