Lutok is a lightweight C++ API library for Lua.
https://github.com/jmmv/lutok
[Thomas:
- move lutok inclusion in package/Config.in after including the Lua
external modules
- add a comment explaining why we are passing --without-atf
- remove the logic around -ldl, it seems to build just fine without it.]
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ATF, or Automated Testing Framework, is a collection of libraries to
write test programs in C, C++ and POSIX shell.
https://github.com/jmmv/atf
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[use buildroot's libatomic_ops, libuv and host-luajit; add
dependencies from libuv]
[Thomas: indicate that the hash has been locally calculated.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is needed as a dependency of lua-periphery. Currently,
c-periphery is automatically cloned by lua-periphery, which causes two
problems:
1/ It does not integrate properly with the download infrastructure of
Buildroot, making offline builds impossible since not the entire
source code is downloaded by Buildroot.
2/ It does not use the latest version of c-periphery, which has some
fixes contributed by Vicente to fix c-periphery on MIPS.
Introducing this package is needed as part of the fix for the
following build failure:
http://autobuild.buildroot.org/results/0ad/0ad656970b3cbc84b5531b28155ba2f747715fe3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cc-tool provides support for Texas Instruments CC Debugger
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: avoid adding /usr/local to library path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It always uses its own copy of pyexpat, but we can at least make it use
buildroot's expat.so.
[Peter: select expat]
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds a new package for all libraries and drivers
provided by Nvidia Linux4Tegra release 16.5.
We have intermediate .mk and Config.in, because those values will be
shared with the codecs package, to come in a follow-up patch, like we
have for the Freescale stuff.
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
[yann.morin.1998@free.fr:
- split jpeg into its own patch
- split codecs and gstreamer plugins out into their own packages
- do not patch for .pc files, just bundle them in $(@D)
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ben Ben <carmazen84@gmail.com>
[Thomas:
- don't select BR2_PACKAGE_XLIB_LIBXT, there is no reference to it
in <pkg>_DEPENDENCIES, and it doesn't seem to be used by any
library.
- select BR2_PACKAGE_XLIB_LIBX11, which is referenced by the .mk
file, and is actually used by the pre-built .so files.
- do not select BR2_PACKAGE_XLIB_LIBXV, since it isn't used by the
X.org libraries/drivers, but only the Gstreamer ones.
- remove 'NVIDIA_TEGRA23_BINARIES_INSTALL_TARGET = YES', it is not
needed since it is the default.
- remove the definitions of NVIDIA_TEGRA23_BINARIES_FIRMWARE,
NVIDIA_TEGRA23_BINARIES_LIBRARIES and
NVIDIA_TEGRA23_BINARIES_PKGCONFIG, these are very long, and not
really needed: just copy all the firmware, libraries and .pc files
with a simple 'cp -dpfr'.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove reference to BR2_LARGEFILE, this option has been
removed. Largefile support is now guaranteed to be present.
- rewrap Config.in help text to the appropriate length.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This move is necessary to sync the package with scancpan output
as suggested by Francois.
http://lists.busybox.net/pipermail/buildroot/2015-April/126406.html
Since perl-libwww was never part of any official buildroot release
I did not bother the include legavy handling of its options ;)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- move package to 'Libraries -> Graphics'
- wrap the Config.in help text
- change license from "Zlib" to "zlib license" to match what the
zlib package is doing.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove dependency on python (already a dependency of python-sip),
and add a dependency on host-python-sip, since python-sip no longer
depends on host-python-sip.
- Make the code Python 2 / Python 3 compatible (both have been
tested).
- Fix indentation all over the place.
- Remove double quotes when defining variable values, not needed.
- Add <pkg>_BUILD_CMDS to do the build process separately from the
installation.
- Create a PYTHON_PYQT_CONF_OPTS variable with all the config
options, since some of them are now conditional.
- Use 'compileall' to byte-compile the dummy __init__.py.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Based on http://lists.busybox.net/pipermail/buildroot/2013-October/080830.html
[Thomas:
- fix license information: it is a "or" between the SIP license,
GPLv2 and GPLv3
- the target version of python-sip does *not* need the host version
of python-sip, it can build perfectly fine without it. python-qt
will need host-python-sip, but there's no need to have this
dependency between python-sip and host-python-sip.
- add support for Python 3, since the package could also be enabled
for Python 3.
- add <pkg>_BUILD_CMDS for host and target variants, so that the
build does not take place when doing the installation.
- use HOST_MAKE_ENV and TARGET_MAKE_ENV where appropriate.
- fix indentation.
- propagate the thread and mmu dependencies from Qt.
- extend the Config.in help text.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FreeImage is an Open Source library project for developers who would like to
support popular graphics image formats like PNG, BMP, JPEG, TIFF and others as
needed by today's multimedia applications.
See: http://freeimage.sourceforge.net
[Thomas:
- add hash file
- add dependency on !BR2_STATIC_LIBS, since the build system of
libfreeimage always tries to build a shared library.]
Signed-off-by: Rémi Rérolle <remi.rerolle@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fonts & co go before Games.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove 003-allow-flags-from-environment.patch, and pass
TARGET_CONFIGURE_OPTS in the environment instead.
- convert the patches to Git formatted patches.
- use the v1.18 tag instead of a commit hash.
- do not pass TARGET_CONFIGURE_OPTS at install time, this is not
needed.]
Signed-off-by: Steve James <ste@junkomatic.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tovid suite, also known simply as tovid, is a collection of shell
and Python scripts for creating DVDs and (S)VCDs. It is pronounced
"to vid" (because it converts to video disc formats).
[Thomas:
- remove largefile dependency
- properly propagate mplayer and ffmpeg dependencies.
- fix license: it's GPLv2+, not GPLv2.]
Signed-off-by: Steve Kenton <skenton@ou.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove dependency on SSP support by adding a patch that changes
the configure.ac script stack protector test to actually work.
- rewrap Config.in help text
- fix how BR2_USE_MMU is used when displaying the comment.
- fix the license, it's BSD-3c, not BSD-2c.
- bump to version 2.9.5.]
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename to open-plc-utils to match upstream name.
- fix Config.in to use tabs instead of spaces
- remove 'default n' line
- add dependency on BR2_USE_MMU
- bump to a more recent upstream commit
- remove no longer needed openplc-0002-Remove-vfprintf-call.patch
- rename patch to the proper naming convention
- specify <pkg>_LICENSE_FILES
- pass CROSS= instead of CC=
- do not pass CC= at install time.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add BR2_USE_MMU dependency, since fork() is used.
- Put <pkg>_SOURCE next to <pkg>_VERSION and <pkg>_SITE.
- Improve comment about why autoreconf is needed.
- Change the location in menuconfig of the package, "Networking
applications" didn't seem like an appropriate location.]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- adjust length of comment header in .mk file.
- fix comment in Config.in to match what's specific in the Buildroot
manual.
- fix <pkg>_LICENSE to 'Artistic-2.0'.]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is needed by Poppler.
[Thomas:
- fix download location, which was incorrect.
- add dependency on host-pkgconf, since the configure.ac script uses
PKG_CHECK_MODULES and we're doing an autoreconf.
- add optional dependencies on libpng, tiff and lcms2, so that they
are explicit instead of automatically detected.]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SL (Steam Locomotive) runs across your terminal when you type "sl" as
you meant to type "ls". It's just a joke command, and not useful at
all.
[Thomas:
- Change "depends on BR2_PACKAGE_NCURSES" to "select
BR2_PACKAGE_NCURSES".
- Rewrap Config.in help text.
- Remove comment in help text about the need to check dependencies,
there's nothing to be done really.
- Change the license from "Unclear" to "Custom".
- Use $(TARGET_CONFIGURE_OPTS instead of passing CC and CFLAGS
explicitly.
- Pass '-m 0755' when doing the $(INSTALL)
- Add ncurses to SL_DEPENDENCIES.]
Signed-off-by: Jens Rosenboom <j.rosenboom@x-ion.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the userspace tools and daemons LIRC - Linux remote
control
[Thomas:
- rewrap Config.in help text, lines were too long. And do a bit of
rewording also.
- remove trailing whitespaces in Config.in.
- make sure Config.in is included from package/Config.in, otherwise
the package is not visible.
- use a full destination path when installing the sysv init script.
- add dependency on BR2_USE_MMU, since fork() is used.
- fix init script: use -n option to not daemonize since
start-stop-daemon is already doing that, use 'mkdir -p' and 'ln
-sf' to make the 'start' action re-executable.]
Signed-off-by: Rhys Williams <github@wilberforce.co.nz>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all of the scattered fonts, icons, sound packs and themes into a
new category for them.
In preparation for the inclusion of more fonts.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The category just contains gtk2-theme-hicolor... which is a duplicate of
hicolor-icon-theme, d'oh!
Remove it and select the only one via legacy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix <pkg>_LICENSE_FILES, since there is no file named
'LICENSE' in the tarball.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sysdig is open source, system-level exploration: capture system state
and activity from a running Linux instance, then save, filter and
analyze.
[Thomas:
- remove unneeded 0001-makefile-driver-compile-options.patch, instead
pass KERNELDIR in the make options when building the driver, and
pass the contents of $(LINUX_MAKE_FLAGS) directly.
- use $(SYSDIG_BUILDDIR) instead of $(@D)/buildroot-build, so that
the package does not depend on the package infra using specifically
buildroot-build as the build subdirectory.
- use $(MAKE) -C <foo> instead of cd <foo>; $(MAKE).
- rename 0002 patch to 0001, since the 0001 patch is removed.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Fix dependency on C++, it should use BR2_INSTALL_LIBSTDCPP and not
BR2_TOOLCHAIN_BUILDROOT_CXX.
- Fix comment dependency, there should be an || between all the
toolchain dependencies. Also fix the dependency on Qt5 for the
comment, which was in the wrong way: the comment was displayed
only when Qt5 was disabled.
- Use -DDISABLE_WERROR=TRUE instead of -DDISABLE_WERROR=y, since
TRUE/FALSE are normally the accepted values for CMake options.]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove mandatory libpciaccess and numactl dependencies. Those
dependencies are optional.
- add dependency on threads.
- use a HWLOC_VERSION_MAJOR variable to avoid repeating the major
version number in HWLOC_SITE.
- explicitly disable features we don't support.
- explicitly enable/disable pci and numa support, depending on the
availability of the corresponding dependencies.
- add dependency on host-pkgconf, since pkg-config can be used by
hwloc configure script.]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix commit title
- powertop wants libintl unconditionally, so make sure
BR2_PACKAGE_GETTEXT is selected when BR2_NEEDS_GETTEXT is set, and
add gettext to the dependencies.
- add missing comment about thread dependency.
- add missing dependency on host-pkgconf, without which powertop
cannot find libnl.
- patch src/Makefile.am to not pass -fstack-protector, which fails
to build if the toolchain does not have SSP support.
- rename patch powertop-autotune.patch to confirm to the patch
naming convention.]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dvd+rw-tools are used to master Blu-ray Disc and DVD Disc media,
both +RW/+R and -RW/-R. Note: The +RW in the name is a historical
artifact. This package contains the widely used growisofs program.
[Thomas:
- adjust minor formatting issues in Config.in file.
- remove unneeded empty line in hash file.
- make the mkisofs symbolic link a relative one.]
Signed-off-by: Steve Kenton <skenton@ou.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version of libftdi can coexists beside the 0.x version.
Signed-off-by: Daniel Sangue <daniel.sangue@sangue.ch>
[Samuel Martin:
- libftdi1.mk: bump to version 1.2 and add hash
- cleanup uneeded libusb-compat stuff
- Config.in: add comment when ftdipp1 deps are not met
- fix typos in variable names and legit CMake options for *_CONF_OPTS
- add support for python bindings and ftdi_eeprom
- fix static build
- fix build with toolchain w/o C++ support
]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas:
- reorder Config.in option properties: first the "bool" property,
then the "selects", then the "depends on".
- remove "thread" dependency from the libftdipp1 comment since the
whole package can anyway not be selected if there's no thread
support.
- fix a big mistake in the .mk file:
$(if BR2_PACKAGE_PYTHON,python,python3)
replaced by:
$(if $(BR2_PACKAGE_PYTHON),python,python3)
- add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Useful for packages shipped with a testsuite which makes use of ctest
Since ctest is just a tool provided by the cmake sources, this change
introduces a hidden BR2_PACKAGE_CMAKE symbol which is automatically
selected by the BR2_PACKAGE_CMAKE_CTEST one.
This is like this mostly for consistency (cmake is the actual package,
not ctest).
CMake is a particular package:
* CMake can be built using the generic infrastructure or the cmake one.
Since Buildroot has no requirement regarding the host system cmake
program presence, it uses the generic infrastructure to build the
host-cmake package, then the (target-)cmake package can be built
using the cmake infrastructure;
* CMake bundles its dependencies within its sources. This is the reason
why the host-cmake package only has host-pkgconf as (runtime)
dependency, whereas the (target-)cmake package has a lot of
dependencies, using only the system-wide libraries instead of
rebuilding and staitcally linking with the ones bundles into the CMake
sources.
[Thomas:
- add missing C++ dependency.
- add missing multiple 'select' in Config.in
- add missing wchar dependency, inherited from selecting libarchive.]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libdri2 is a library for the DRI2 extension to the X Window System. This
is the split out dri2 client side code from mesa, libva, libvdpau, etc..
It can be used by applications or user-space drivers to provide
accelerated graphics.
Signed-off-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iotop does for I/O usage what top does for CPU usage.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python module for interfacing with SPI devices from user space via the
spidev linux kernel driver.
[Thomas: fix <pkg>_LICENSE_FILES.]
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package description was copied from
https://launchpad.net/~dajhorn/+archive/ubuntu/softether/
[Thomas:
- reorganize patches by pulling the two biggest patches from Github,
and only having the remaining patches in Buildroot.
- use a full destination path when installing hamcorebuilder in
$(HOST_DIR)/usr/bin.
- minor reformatting.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt-webkit-kiosk is a simple browser working in kiosk-mode, powered by
QtWebkit. It provides a convenient way to deploy a full-screen browser
on embedded system platforms.
This commit adds the appropriate packaging to Buildroot, including an
option to deploy the provided sound files.
Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host variant is useful to build some third-party packages that
need this Perl module.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Wine is a compatibility layer capable of running Windows applications
on Linux.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Only build-tested, not run-time tested y lack of Windows apps]
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix a few typos in one comment in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove libgc that is a copy of bdwgc but it's not used
by any package and gives an error when building make-4.1.
bdwgc is a mandatory dependency for guile.
Fixes:
http://autobuild.buildroot.net/results/b80a34a602b1241bc03cd43df1a269389d50e75c/
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
[baruch: added Reported-by, Config.in.legacy entry, autobuilder reference]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
[ThomasDS: rewrap package/lua-periphery/Config.in]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(compile-tested on x86/glibc armel/uclibc)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Don't explicitly pass CC_FOR_BUILD and CFLAGS_FOR_BUILD, those are
already part of the default environment passed by the
autotools-package infrastructure.
- Explicitly disable Lua and LuaJIT support to avoid mis-detection of
host installation.
- Explicitly handle the optional support of libxml2, OpenSSL and
zlib. Especially, the absence of explicit handling for libxml2 was
causing a build failure due to the host libxml2 being detected.
- Remove /usr/manual and /usr/build from the target. This saves 20+
MB of target space.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is possible to build the libfreerdp standalone, without X.Org.
Having a libfreerdp will be usefull for the weston RDP compositor.
So, only select the strictly required X.Org library if X.Org is enabled,
and only build with Xcursor if it is enabled. Drop dependency on other
X.Org libraries, as they are not strictly required (or get pulled as
dependencies of the mandatory libXext).
Re-order the menuconfig, as freerdp is no longer an X-only application.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch only adds the userland part. Unless other such other
packages (which we named like: rpi-userland), we do not replicate this
naming scheme with this package, as a future patch will also enable
building the kernel part of the driver. So, it is better to just name
that package with -driver, rather than with -userland and renaming it
afterwards.
[Thomas:
- Rewrap Config.in help text.
- Add a comment to explain why mesa3d-headers, xlib_libX11 and
xlib_libXext are part of the dependencies.
- Fix typo in comment about library installation: s/The/Then/
- Use 'addsuffix' instead of 'patsubst' to calculate the final
filename of libraries to install.
- Use more temporary variables to make the library installation loop
clearer: 'libpath' is the relative path of the library in
nvidia-driver sources, 'libname' the base name of the library,
'libsoname' the soname of the library, and 'baseso' the base .so
symlink name.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some OpenGL/EGL/GLES/VG providers do not provide the corresponding
headers, and rely on using "the headers provided by the distribution".
In our case, we can not rely on such headers, because we are not a
distribution, and we have no way to provide those headers (not even
speaking about relying on the headers provided by hte host distribution,
because they might well not be installed at all).
Also, we can not rely on another package to provide those headers,
because we can only have one provider enabled in any configuration.
The Khronos group provides such headers, and they are the reference
headers, but we can not realy use them:
- most of them are not packaged: they are not versioned and not
provided in a tarball, but as separately downloadable files;
- those headers are anyway incomplete: there are headers not provided
by Khronos, like GL.h
Instead, we rely on mesa3d to provide those headers: mesa3d has all the
headers we need.
Modifying the existing mesa3d package would not be easy; we'd have to
differentiate whther we need only the headers or the full package. The
meas3d Config.in and .mk are already quite non-trivial that adding such
a feature would render them even more illegible.
So, we introduce mea3d-headers as a new package, that is in fact just
mesa3d with a much simplified Config.in and .mk, that other OpenXXX
providers may select if they do not provide the OpenXXX headers.
Note: we're not installing GLES3 headers, because what Buildroot
currently calls libgles is in fact libgles2; we have no way to specify
that we have libgles3. So, we just install headers for GLES and GLES2.
[Thomas:
- Wrap Config.in help text to a reasonable length.
- Don't rely on mesa3d to provide mesa3d-headers: they should be
mutually exclusive. Instead, error out if both packages are
selected.
- Take into account the update of mesa3d to 10.4.5.
- Don't copy each header file individually, use a cp -dpfr call to
copy entires header files directories.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds support for the BlueGiga WF111 WiFi driver and the binary utilities
distributed alongside the driver. An account is required to download the
sources from the BlueGiga website, which can be created freely. The
driver is available for armv5, arm7a and i386.
Since it is not possible to automatically retrieve the sources, because
of the required user account needed on the BlueGiga website, an option
is added to let the Buildroot user specify the directory where the
driver tarball was downloaded.
Finally, two options must be selected in the Linux kernel configuration:
CONFIG_WIRELESS_EXT and CONFIG_WEXT_PRIV. These are blind options (i.e.
not selectable directly) so they cannot be enabled by a change in
linux/linux.mk. The user as two choices to enable these options:
- By making them non blind, with a "WF111 support" configuration entry
for example.
- By enabling another WiFi driver that select them.
The work behind this commit was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The lxml XML toolkit is a Pythonic binding for the C libraries libxml2
and libxslt.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr: fix staging path; trim dependencies of
the host variant]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove trailing whitespace
- remove "# libnl" comment in Config.in
- remove BATCTL_SOURCE, which is not needed, since the default value
is used
- pass $(TARGET_CONFIGURE_OPTS) in the make environment, not as a
make option, otherwise the CFLAGS += lines of batctl Makefile do
not have any effect, and lead to not have the proper include path
to the libnl header files.]
Signed-off-by: Jens Zettelmeyer <zettelmeyerj@goooglemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Adjust the comment about the dependency on erlang
- Fix license to be 'GPLv2+ with OpenSSL exception' and not just 'GPLv2+'
- Use double quotes instead of simple quotes in the .mk file.
- Don't use the EJABBERD_MAKE_ENV variable, since it's not defined
anywhere.
- Remove the 0007-fix-init.patch patch, since we're not using the
init script provided by ejabberd, and rename
0008-fix-install-permissions.patch to
0007-fix-install-permissions.patch.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust license to be 'GPLv2 with OpenSSL exception' instead
of just 'GPLv2'.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fixup license, it uses the TCL license, and not GPLv2+.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fixup license, it is GPLv2+ and not GPLv2.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: minor adjustement to Config.in help text]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mjpegtools programs are a set of tools that can do recording of videos
and playback, simple cut-and-paste editing and the MPEG compression of audio
and video under Linux.
[Peter: license is GPLv2+]
Signed-off-by: Steve Kenton <skenton@ou.edu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexander Clouter <alex+buildroot@digriz.org.uk>
[ThomasDS: needs ipv6; rewrap package/odhcp6c/Config.in]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(compile-tested on x86/glibc, armel/glibc, armel/uclibc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- Fix variable name: LIBVIPS_CONF_OPTSS -> LIBVIPS_CONF_OPTS
- Add a lot of --without-<foo> options to make sure we explicitly
disable optional features that are not handled by the .mk file.
- Remove the host-swig dependency, which was probably thought of
being needed by Pieter due to --without-python not being passed
explicitly.
- Remove trailing spaces in Config.in.
- Rename patch to the new naming convention.]
Signed-off-by: Pieter De Gendt <pieter.degendt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Memtest86+ is a bootable standalone memory test program.
Please note that this is the forked memtest86+ program and not
the original memtest86 which has different licensing. Buildroot
does not support packages with a '+' sign in their name.
Memtest86+ is a utility designed to test whether your memory
is in working order. It repeatedly writes an enormous amount
of different patterns to all memory locations and reads them
back again and verifies whether the result of the read is the
same as what was written to memory.
Memtest86+ will only work on 32-bit or 64-bit x86 targets.
It boots as an i486 program and autodetects hardware.
[Peter: tweak help text as suggested by Thomas]
Signed-off-by Stephen M. Kenton <skenton@ou.edu>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David Bender <codehero@gmail.com>
[yann.morin.1998@free.fr:
- remove ldaps config option, use build-time dependencies
- add dependencies against openssl/gnutls/libnss as appropriate
- fix mis-detected tls support when openssl is enabled
- fix strip at install time
- cleanup configure arguments
- add hash file
- fix help entry
]
[Peter: needs wchar]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David Bender <codehero@gmail.com>
[yann.morin.1998@free.fr:
- add optional dependency to nettle
- fix build against nettle
- switch to using the ftp for release, instead of github
- add missing dependency to host-pkgconf
- remove extraneous configure options, we already pass them
- drop extraneous ac_cv_func_memcmp_working, we already pass it
- drop extraneous ac_cv_func_uname, it is properly found
- add hash file
- tweak help entry
]
[Peter: license is BSD-2c]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated for a year now so remove the target variant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated for a year now so remove the target variant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated for a year now so remove the target variant.
Also rename patch to new naming convention.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated since feb 2014 and it'll be a year for the 2015.02
release so remove it.
And it's basically useless without a target toolchain.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Dave Bender <bender@benegon.com>
Signed-off-by: David Bender <codehero@gmail.com>
[yann.morin.1998@free.fr: simplify rules to use -C $(@D); do not install
in target/ ; add description to patches; split patches into independent
changes; add hash]
[Thomas: fix minor typos in patch description.]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added C/C++ JSON parsing package benejson.
[Thomas:
- Get rid of the usage of BENEJSON_SCONS_OPTS, since this variable is
never defined.
- Remove BENEJSON_SCONS_ENV, and pass the options directly in the
definition of <pkg>_BUILD_CMDS.
- Fix indentation of BENEJSON_BUILD_CMDS.]
Signed-off-by: Dave Bender <bender@benegon.com>
Signed-off-by: David Bender <codehero@gmail.com>
[yann.morin.1998@free.fr: fix static/shared install; enhance help entry;
fix extra space; add hash]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xorriso cd/dvd/bd iso 9660 manipulation and disc burner.
libburnia is a project for reading, mastering and writing
optical discs. Currently it is comprised of libraries named
libisofs, libburn, libisoburn, a cdrecord emulator named cdrskin,
and an integrated multi-session tool named xorriso.
The software runs on GNU/Linux, FreeBSD, Solaris, NetBSD.
It is base of the GNU xorriso package and is actively maintained.
[Thomas:
- Rewrap Config.in help text
- Add optional dependencies on libcdio, readline, acl, attr, zlib,
bzip2.
- Handle thread support.
- Add hash file.]
Signed-off-by Stephen M. Kenton <skenton@ou.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
DVDAuthor is a set of tools to help you author the file and directory
structure of a DVD-Video disc, including programmatic commands for
implementing interactive behaviour. It is driven by command lines and
XML control files, though there are other programs that provide
GUI-based front ends if you prefer
[Thomas:
- Make the libdvdread dependency optional: it is only needed for the
dvdunauthor program, which can be disabled using a configure
option. So a separate Config.in option was added for dvdunauthor.
- Adjust license to GPLv2+, as can be seen in the source code itself.
- Add optional dependency on fontconfig and imagemagick. Make sure we
don't pick up a host installed GraphicsMagick (which is different
from ImageMagick!)
- Add a hash file.]
Signed-off-by Stephen M. Kenton <skenton@ou.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libcli provides a shared library for including a Cisco-like command-
line interface into other software. It's a telnet interface which
supports command-line editing, history, authentication and callbacks
for a user-definable function tree.
[Thomas: rewrap Config.in help text.]
Signed-off-by: Steve James <ste@junkomatic.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't use the 1.17.x series because it has issues when
cross-compiling.
[Thomas:
- change license to GPLv2+, and the license file to COPYING. While
start-stop-daemon.c itself is under the Public Domain, the compat
library against which it is linked is GPLv2+.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The geoip "helpers" are basically scripts that download and reformat
the geoip database in a form usable by xt_geoip.
The netfilter (kernel & userland) sides of it are built and installed.
Since there are many considerations to geoip databases (free,
commercial and variants for each) it's left to the user to deal with
that if they plan to use the extension which is only one among many.
[Thomas:
- Take into account the rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS
- Remove "depends on BR2_LINUX_KERNEL" as suggested by Arnout.
- Move XTABLES_ADDONS_CONF_OPTS a bit further down, with newlines
around it, and adjust the indentation of the first line. Just to
make it slightly more readable.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rename the VNSTAT_INSTALL_VNSTATI to VNSTAT_INSTALL_VNSTATI_CMDS,
and use 'define ... endef'.
- Use full paths for the destinations when using $(INSTALL)]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with RaspberryPi B+ and PiTFT Mini Kit - 320x240 2.8" TFT
(see [1] and [2]) and the following target configuration changes:
- cmdline.txt: add 'fbcon=map:10 fbcon=font:VGA8x8'
- add /etc/modules-load.d/fbtft.conf with 'fbtft_device'
- add /etc/modprobe.d/00-fbtft.conf with 'options fbtft_device name=adafruit28 rotate=90 gpios=dc:25'
[1] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9893.jpg
[2] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9897.jpg
[Thomas:
- Rename prompt of the Linux extension to "FB TFT drivers"
- Remove the full name of the kernel config options in the help
text. Giving their CONFIG_<foo> name is enough.
- Remove the mention of CONFIG_SPI_BCM2708, since this makes the
description RaspberryPi specific, while these drivers can work
with any SPI controller.
- Refactor the code in linux-ext-fbtft.mk to avoid duplication
between the < 3.15 and >= 3.15 cases.
- Make the fbtft package a promptless package, since there is no
point in selecting only this package, without the kernel
extension.
- Change the license to GPLv2, since it's kernel code.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove empty new line at end of .mk file.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add 'cp -dpfr' instead of a convuluted use of 'tar c' + 'tar
x' do not a copy.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Irqbalance is a daemon to help balance the cpu load generated by
interrupts across all of a systems cpus.
[Thomas:
- Add upstream URL in Config.in help text.
- Fix indentation of init script.]
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Change the dependency logic in the Config.in file. We don't want to
have a 'depends on BR2_PACKAGE_QT5GRAPHICALEFFECTS': it should be
selected automatically. Instead, let's have a dependency on Qt5 and
OpenGL, and select everything else automatically. A comment is
added, shown only when Qt5 is available, on the right platforms
(which have JSCore support), to explain that we need an OpenGL
backend.
- Change the prompt of the package to be qt5cinex, to match the
package name.
- Replace "High-definition support" by "High-definition version".
- Fix a typo in the Config.in help text: definifition -> definition.
- Add a comment in the .mk file explaining why we install a wrapper
shell script (explanation taken from Pierre's e-mail).
- Fix indentation in the install target commands.
- Keep only sha256 hashes, those are sufficient. Replace the comment
in the hash file by the more traditional "Locally computed".]
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Bump to Django 1.7.2, the latest available version;
- Support Python 3 in addition to Python 2.
- Use a download location from pypi.python.org since the download
location from djangoproject.com didn't work as is and is
impractical to use with Buildroot: the full URL of the tarball is
https://www.djangoproject.com/download/1.7.2/tarball/. I.e, it does
not end with the tarball file name.]
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GNU lightning is a library that generates assembly language code at
run-time.
https://www.gnu.org/software/lightning/
[Thomas:
- Wrap list of architectures in Config.in
- Introduce an explicit Config.in option for the disassembler
support, since it needs both binutils and zlib, which may not be
easy to guess.
- Add hash file.
- Bump to version 2.0.5.
- Add patch to fix cross-compilation issues on ARM and x86 due to
AC_RUN_IFELSE() tests.
- Adjust license information: the library is actually under LGPLv3+,
not GPLv3. There is a COPYING file with the text of the GPLv3 in
the code base, but this license doesn't seem to be used in anything
that is actually installed.
- Add AUTORECONF = YES since we're now patching configure.ac.
- Add missing dependency on zlib for the disassembler support.
- Add a special LIBS=-lintl when enabling the disassembler support
because binutils libraries use gettext functions, but they are not
linked against libintl.]
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Changed hash file to use SHA256
- Remove libiconv handling, since the iconv detection in mpc is
broken: if it's not available in the C library, it expects to find
iconv() in libintl (from gettext). But it's actually libiconv that
provides iconv() for non-locale capable uClibc toolchains. But
since anyway the package builds fine without iconv() support and
properly detects when it's available, don't bother with this.]
Signed-off-by: Thierry Bultel <tbultel@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add hash file.
- Rewrap Config.in help text and remove trailing whitespace.
- Remove unneeded empty new line at the end of the .mk file.]
Signed-off-by: Ernesto L. Williams Jr <ernesto@slac.stanford.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Fix typo in patch description.
- Remove trailing whitespace in Config.in.
- Fix Config.in comment to match what's specified in the Buildroot
manual.
- Adjust .mk logic to use BR2_STATIC_LIBS vs. BR2_SHARED_LIBS instead
of BR2_PREFER_STATIC_LIB, and therefore support the installation of
only the shared library.
- Remove the libustr-debug library from the target and staging
directories, it's the same as libustr, except that it's compiled
with debugging symbols.
- Always install only the shared variant of the library for
host-ustr.]
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add hash file.
- Enable on all architectures, and enable on uClibc. The
autobuilders will let us know if there are any problems.
- Use "Public Domain" as the license instead of "PublicDomain"
- Handle Python 2 vs. Python 3 for the host package. Either can be
used by libselinux.
- Change the trick used to get the library and programs installed in
usr/lib/ and usr/sbin/ instead of lib/ and sbin/.]
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rename patch to the proper naming convention, and add a
description to it.
- Add mandatory dependency to OpenSSL.
- Make the dependency on libwebsock optional.
- Remove select of host-gengetopt, since this package no longer has
a menuconfig option.
- Add missing toolchain option dependencies inherited from selected
packages.
- Add proper Config.in help text.
- Fix the .mk comment header to the proper format.
- Use the github function and remove the unneeded SITE_METHOD
variable.
- Add support for optional Opus and Libogg support.
- Remove hash file, since the package is fetched from github.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add better Config.in help text.
- Fix the hash file format.
- Fix comment header in .mk file.
- Remove SOURCE variable, as it had the default value.
- Add dependency on host-pkgconf, used by the configure script.
- Add LICENSE and LICENSE_FILES variables.
- Do not use BR2_HAVE_DOCUMENTATION, this option has been
removed. Instead, always disable doxygen.
- Simplify the IPv6 test.
- Add optional dependency on OpenSSL.
- Fixup the handling of the --enable-ndebug.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add dependency on BR2_TOOLCHAIN_HAS_THREADS
- Improve Config.in help text
- Fixup comment header in .mk file.
- Use github helper.
- Remove hash file (we're downloading from Git)
- Fixup LICENSE_FILES
- Remove LIBWEBSOCK_CFLAGS, they were the default.
- Remove LIBWEBSOCK_LIBS, and instead use a patch to switch
libwebsock configure script to use pkg-config.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add better Config.in help text and fix its indentation
- Fix comment header in .mk file
- Uncomment useful commented lines in .mk file (SITE and AUTORECONF)
- Add LICENSE_FILES variable.
- Add handling of static/shared libraries build/installation.
- Add dependency on host-pkgconf, so that libsrtp installs its own
.pc file.
- Add optional dependency on OpenSSL.
- Use github helper.
- Remove hash file, since we're downloading from Git.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove unneeded comment in Config.in
- Remove select if libiconv, not needed
- Add dependency on wchar, needed when we depend on gettext
- Improve Config.in help text
- Fix the format of the hash file to make it actually useful
- Fix the comment header in the .mk file
- Remove useless commented line in .mk file
- Fixup license information: it's not under GPLv3, but under LGPLv3+
(library) and GPLv3+ (test programs)
- Add host-pkgconf to the dependencies, remove libiconv from the
dependencies.
- Add a comment to explain why autoreconf is needed.
- Remove usage of $(MAKE1) that does look necessary.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rename patch to the proper naming convention
- Reduce patch to only take care of the IPv6 case
- Add description in the patch
- Propagate libglib2 dependencies in Config.in + added the
corresponding comment.
- Added a real help text, and fixed the help text indentation.
- Fixed the comment header in the .mk file to have the right number
of # signs.
- Added the license informations
- Added a dependency on host-pkgconf, used by the configure script
- Added --without-gstreamer and --without-gstreamer-0.10 to be
explicit about the fact that we don't support GStreamer in libnice
for now.
- Fixed the hash file to have the proper format.]
Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Background information: http://xbmc.org/introducing-kodi-14. In a
first step to bump version to 14.0-Helix, we move the xbmc package to
a new directory called kodi.
Appropriate Config.in.legacy variables are added.
[Thomas: rename patches to the new convention.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libiio is a library to ease the development of software interfacing
Linux Industrial I/O (IIO) devices.
http://wiki.analog.com/resources/tools-software/linux-software/libiio
[Thomas:
- Remove changelog from the commit log.
- Rename init script to S99iiod instead of S99iiod.sh
- Remove "status" command from init script, and implement "restart"
instead.
- Add dependency on thread support in toolchain.
- Fixup indentation in the .mk file.
- Fixup wrapping in the Config.in help text.]
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove dependency on host-python-markdown, apparently not needed
(it builds fine in a minimal chroot, which doesn't have
python-markdown installed)
- Remove runtime dependency on markdown, I can run Cheetah basic
examples without python-markdown installed.
- Add dependency on Python 2 only, since it doesn't build for Python
3.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove host variant of python-markdown, as it is not needed.
- Add runtime dependency on Python XML module.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix license from GPLv2 to 'GPLv2+ with OpenSSL exception'
- add -std=c99 to CFLAGS, otherwise it doesn't build with a minimal
toolchain configuration
- add BR2_USE_MMU dependency since fork() is used.]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is an alternative to python-enum34 with a somewhat different API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- add BR2_USE_MMU dependency, since fork() is used
- rename do_start() and do_stop() to just start() and stop(), as we
do in most init scripts in Buildroot.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- Remove dependency on python || python3, as we did for all other
python modules that work with both Python 2 and Python 3.
- Rewrap help text.
- Add <pkg>_LICENSE_FILES value.]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream is no longer available, so get the tarball + important patches from
Fedora.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The functionality is included in python3 as the ipaddress module, so make it
python2 only.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- put liburiparser at the right place in package/Config.in, i.e
sorted alphabetically
- use positive logic for the wchar test.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Guile is an interpreter and compiler for the Scheme programming
language, a clean and elegant dialect of Lisp.
The patch guile-01-fix_arm_endianness.patch is based on guile's
git commit ^ffd3e55cfd
[Thomas:
- rewrap comments and help text.
- add missing host-gettext dependency, since gettext.m4 is needed for
the package to autoreconf.
- add missing host-pkgconf dependency.
- add dependency on wchar, inherited from libunistring.]
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bdwgc is a garbage collector for C and C++. The Boehm-Demers-Weiser
conservative garbage collector can be used as a garbage collecting
replacement for C 'malloc' or C++ 'new'.
[Thomas:
- drop the dependency on host-bdwgc, since it is not needed. Only
host-guile will need host-bdwgc, but bdwgc itself doesn't need
host-bdwgc.
- add dependency on host-pkgconf, needed to detect libatomic_ops
- add --with-libatomic-ops=yes to force bdwgc to use the system
libatomic_ops, and not the internal one.
- instead of using BDWGC_LIBTOOL_PATCH = NO (needed to avoid patching
libtool because the libtool version used by bdwgc does not have a
corresponding patch in Buildroot), use BDWGC_AUTORECONF = YES,
which generates a proper libtool (without this, some -L/usr/lib
flags are added by libtool).]
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix the license, it is MIT, not BSD-3c.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use "make install", which allows to remove the custom installation
logic in mcelog.mk.
- no need to explicitly pass CFLAGS and CPPFLAGS when doing the
build, since those definitions are already part of
$(TARGET_CONFIGURE_OPTS).]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for Exiv2 library and utility to manage image metadata
Exiv2 can be built in GPLv2+ or commercial version. But in commercial
version the Nikon lens name database and the NLS support has to be
disabled for copyright reason.
[Thomas:
- switch to using the CMake build system, which works better than the
clunky autoconf + manual Makefile based build system.
- add missing toolchains dependencies: does not build in static
library configuration, needs C++, etc.]
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add optional dependency on Busybox, because debianutils
installs its own version of which, so we need to override the Busybox
one.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all the Qt external modules (qtuio, qjson, etc.) can only
be compiled against Qt4. However, some of them (qjson, qextserialport
at least) can compile with either Qt4 or Qt5.
Therefore, this commit adjusts the Config.in logic to make it possible
for certain modules to be selected with either Qt4 or Qt5. We use the
same approach as the one of for Python 2 vs. Python 3 modules:
- in package/Config.in, the package Config.in files are included
either if BR2_PACKAGE_QT or BR2_PACKAGE_QT5 are enabled.
- each individual package is then responsible for having a dependency
on either BR2_PACKAGE_QT, or BR2_PACKAGE_QT5 or both depending on
what they support. In this commit, we add a dependency on
BR2_PACKAGE_QT to all packages, since for now, they only support
Qt4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides the Adwaita icon theme from the GNOME desktop
environment.
[Thomas: fix the license information to indicate that CC-BY-SA-3.0 is
one of the licenses, and add the COPYING file as well.]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- slightly adjust the prompt of options in the Config.in file
- fix license: it's just LGPLv2.1, no exceptions. Parts of the code
are under public domain, or under the MIT license, but the
combination is under LGPLv2.1.
- rewrap one comment in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CppUnit is the C++ port of the famous JUnit framework for unit testing.
Test output is in XML or text format for automatic testing and GUI
based for supervised tests.
http://www.freedesktop.org/wiki/Software/cppunit/
[Thomas:
- change license to LGPLv2.1, since there is no indication that the
"or later" option is used.
- slightly rewrap text in Config.in file.]
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It should be in "Libraries" -> "Text" instead of "Libraries" ->
"Other", and also entries should be sorted alphabetically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add license information, even if there's unfortunately no license
file
- rename patches to use the correct convention.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: use --enable-largefile/--disable-largefile as appropriate.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- adjust the title of the commit
- remove the thread dependency, by using the --disable-threads
option when needed
- remove LIBUNISTRING_SOURCE, since its value was the default
- use BR2_GNU_MIRROR in LIBUNISTRING_SITE
- adjust the license, which really is LGPLv3+, not LGPLv2. The
license file is COPYING.LIB.]
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rework init script to be more like other Buildroot init scripts,
and fix indentation.
- fix indentation in the .mk file
- remove dependencies on host-autoconf and host-libtool, since the
package has AUTORECONF = YES, this is not needed.
- fix licensing informations.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: instead of building spidev_test directly from the source in
$(BR2_DL_DIR), use SPIDEV_TEST_EXTRACT_CMDS to copy the downloaded
source to the build directory, and build it from here. Allows to
manually tweak the source in the build directory for testing, allows
to apply patches over the source if needed, etc.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the complete Mono implementation. This patch builds
both the native and managed parts.
[Thomas:
- adjust license informations
- add missing host-gettext dependency to host-mono
- minor formatting tweaks.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding the Trinity Linux System call fuzz tester.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
yaml-cpp is a YAML parser and emitter in C++ matching
the YAML 1.2 spec.
https://code.google.com/p/yaml-cpp/
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust dependencies on the comment.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added pps-tools package to add support to the ntpd for a
pps source (requires timepps.h from pps-tools as part of ntpd
build).
[Thomas:
- Use $(TARGET_MAKE_ENV) at install time.
- Alphabetic ordering in package/Config.in, noticed by Jerzy
Grzegorek.]
Signed-off-by: Bryan Brinsko <bryan.brinsko@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While libpciaccess is part of the X libraries, it does not
depend upon X11 or any other X library.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This installs the 'modplug123' command line tool to play tracker music
files (MOD, S3M, XM etc.) using libmodplug.
The modplugtools package can build two players: modplugplay that plays
directly via OSS and modplug123 that plays via libao. Since modplugplay
won't work without OSS support and modern kernels are likely to have no
OSS or OSS emulation, we build only modplug123.
If you have a system without ALSA support for some reason, you can
still use modplug123 to play over OSS via libao.
http://modplug-xmms.sourceforge.net/
[Thomas: add missing Config.in comment about the C++ dependency.]
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides Gtk+ 3.0, a graphical toolkit.
[Peter: fix Config.in deps, ensure atleast 1 backend, remove redundant info]
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Eric: added backend support, use of pkgconf for host-libgtk3]
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides Freedesktop Hicolor icon theme.
This is the fallback icon theme, which only creates the standard
directory structure for storing icons of third-party applications (i.e.
the ones not available in usual icon themes).
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Untested for other architectures, so only enabled for known-working ones.
We explicitly disable all features that depends on other packages,
for now. Such features will be added one by one in the next patches.
Features that do not rely on external packages are explicitly enabled
to catch the dependencies on toolchain features early.
[Peter: propagate dependencies from libglib2]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ecryptfs-utils scripts require the 'getent' program to be
installed to find the home directory of users. However, Buildroot
currently never installs this program, and therefore bug #7142 was
reported, explaining that ecryptfs-utils is not working properly.
In normal Linux systems, the getent program is provided by glibc, and
allows to query not only /etc/passwd, but also other NSS databases
such as LDAP and others.
In the context of Buildroot, this gives us several cases:
1/ Internal toolchain
a/ glibc/eglibc. In this case, the getent program is already built
and installed by Buildroot in the staging directory, so the
only thing missing is installing it in the target directory.
b/ uclibc. uClibc provides a simple shell script that emulates the
behavior of getent. It is located in extra/scripts/getent in
the uClibc sources, but is currently never installed.
c/ musl. There seems to be no getent implementation, and musl does
not support NSS.
2/ External toolchain
a/ glibc/eglibc. In several external toolchains that we tested,
there is a pre-built getent binary available in the sysroot,
but Buildroot is not installing it to the target.
b/ uclibc. The getent wrapper script is typically not part of any
external uClibc toolchain.
c/ musl. There is no getent implementation.
This patch proposes to solve this problem by introducing a getent
package, which has the following behavior:
- When the toolchain is glibc based (either internal or external), it
installs the getent program that was built and installed in the
staging directory. This covers cases 1/ a/ and 2/ a/ above.
- When the toolchain is uclibc or musl based, it installs a version
of uclibc's getent wrapper script that is built into the getent
package. This script is unlikely to change over time, so having it
directly built into the package should not cause much issues moving
forward. This covers all other cases above.
This solution allows to install a NSS-capable getent when glibc/eglibc
is used, and otherwise to rely on uClibc's wrapper script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
am335x-pru-package provides an assembler and program loader for Texas
Instrument's AM335x programmable real-time units.
[Peter: fix typo in patch description]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- add dependency on threads, wchar and dynamic librayr
- add dependency on libiconv when locale support is not enabled
- replace patch hacking includedir by a patch that lets the Makefile
obey to $(DESTDIR)
- remove optional OpenSSL and MySQL support which simply cannot work
due to the usage of AC_CHECK_FILE() in configure.ac, this required
an additional patch to fix the bogus AC_ARG_WITH() calls.
- move from 'Miscellaneous' to 'Libraries' -> 'Other'.
- fixup the licensing information.]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package is based on an earlier package
proposed by Ayaka in December 2013.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- remove 'default n', since it's the default
- add dependency on !BR2_PREFER_STATIC_LIB since the Makefile always
builds a shared library.
- move from Audio/video applications to Libraries -> Audio.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note: the patch adding the pkgconfig module has been sent upstream [1].
[1] http://sourceforge.net/p/canfestival/mailman/message/32876320/
[Thomas:
- license seems to be only LGPLv2.1+. At least, the specific files
pointed to be GPLv2 carry a LGPLv2.1+ header.
- added thread dependency
- minor rewording here and there.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Claudio Laurita <claudio.laurita@integrazionetotale.it>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The OpenBSD implementations of netcat. The main difference from
netcat is the support for IPv6, proxies, and Unix sockets.
[Thomas: use tabs in the command applying Debian patches, add
dependency on Busybox when enabled so that we override the 'nc'
command installed by Busybox.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rewrap help text in Config.in
- Improve cross-compilation patch to not call the 'amiroot' program
on the host, while it is compiled for the target.
- Use CONF_OPTS instead of CONF_OPT.
- Use a pre-build hook rather than re-implementing the BUILD_CMDS
entirely.
- Also include COPYING file in license files.
- License is LGPLv2.1, not LGPLv2.1+: only one file is LGPLv2.1+,
the rest doesn't have any "or later" specification, so we assume
it's only LGPLv2.1.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add the package to package/Config.in
- Add dependency on largefile
- Add new patch to CMakeLists.txt to remove the unused C++ dependency
- Change the existing CMakeLists.txt patch to simply remove the
problematic code, and reword the explanation.]
Signed-off-by: Eric Limpens <limpens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenGL Mathematics (GLM) is a header only C++ mathematics library for
graphics software based on the OpenGL Shading Language (GLSL)
specification.
http://glm.g-truc.net/
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the bcache tools, required to setup the linux bcache
feature of the Linux kernel.
[Thomas: use only one hook to create the missing directories, as
suggested by Yann.]
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
genpart comes handy when there is a need to programatically generate
partition tables, without the need for a full partitioning program like
fdisk et al.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
targetcli-fb is a command-line interface for configuring the LIO
generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configshell-fb is a Python library that provides a framework for
building simple but nice CLI-based applications.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rtslib-fb is an object-based Python library for configuring the
LIO generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Urwid is a console user interface library for Python.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The elfutils package provides a more recent version of the
libelf. Some packages such as ltrace need this more recent
version. Having two packages providing the same library leads to some
conflicts or dependency problems. For instance at the end we had only
one libelf.a when the 2 packages were selected.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New package: openvmtools
[Peter: add patch to fix compilation against modern glib versions]
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds ipmitool, a command-line interface to IPMI-enabled devices.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds odhcploc, a network utility to scan for (rogue) DHCP servers.
[Thomas:
- remove ODHCPLOC_SOURCE line, not needed since the value was the
default
- use 'make install' instead of manually installing the program
- use TARGET_CONFIGURE_OPTS instead of passing just CC and LD
- use tab for indentation inside command definitions instead of spaces]
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: minor formatting tweaks to the Config.in and .mk file.]
Signed-off-by: Arnaud Aujon <arnaud@intelibre.fr>
Tested-by: Marcelo Gutierrez <kuyurix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds Bluez 5.x. Its API is not backwards compatible with
BlueZ 4 so it is packaged separately from BlueZ 4.
BlueZ utils will use systemd and/or udev if enabled. It contains a
hook to install the GATT support tool, which is always built but not
installed by default.
[Thomas:
- Add dependency on 3.4 kernel headers
- Add options for OBEX support and client support, to make the
libical and readline dependencies optional.
- Rewrap Config.in help text.
- Adapt indentation in .mk file.
- Bump to version 5.21.
- Use BR2_PACKAGE_HAS_UDEV instead of BR2_PACKAGE_UDEV.]
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>